Blank Screen during 3D Games ??

Hi, I am a newbie here. Hope to get used to it here ^_^
So...... Yoroshiku!
Straight to my problem.
I seems to encounter this problem below.
My screen will goes to sleep mode or blank screen whenever I tried to play games such as WarCraft III, Battle Realms and other 3D games.
Can someone pelase advise ?
Below is my system info:
MEC PSU: 3.3V/14A, 5V/27A, 12V/15A, Peak Load =380W
MSI K7N2 Delta (Nvidia nForce2 Chipset Based) with:
   AGP8X
   Dual DDR400
   10/100 LAN Ethernet
   5.1 Channel Audio
   Real 128bit Memory Bus
Athlon XP 2100+
1x 256Mb DDR PC3200 CL3 184-Pin DIMM
MSI GeForce4 MX400SE-T 64Mb with TV-out
Using on-board soundcard
HDD: Western Digital 80Gb Ata 133-7200 Rpm
     Maxtor 40Gb Ata 133-5400 Rpm
Asus 16x max Dvd-rom
Asus CDRW 52x24x52x
Win Xp Prof. SP1

Fredrik Åsenius  , You pointed out that he has an nForce based motherboard and then you say install the 4in1 drivers in safe mode.  
4in1 driver are only for VIA based chipsets, I am sure you know this.
fatmantaray:
Leave it on 133Mhz and remove both cd drives and 1 hard drive.
See what happens, that should reduce your power consumption.
Just incase you PSU cannot handle it.

Similar Messages

  • [Dell E5510] Blank screen during and after boot

    Hello,
    I performed system update some time ago (2 or 3 weeks) and left my computer unused. Today I tried to power on it and I was very surprised, because I didn't see anything on screen during boot and after it. I rebooted computer in fallback mode (I also added "i915.modeset=0" to kernel init args), and I saw command line. Then I updated whole system and rebooted it again - no luck again blank screen during boot and after.
    I rebooted it one more time, but with default kernel (I disabled KMS again via GRUB command line) and I saw systemd output during boot. I teems, that all services were started successfully, because all messages were prefixed with "OK". Then I cloud only use command line, because Gnome 3 was not running under seventh console.
    Any idea what is going one here?

    Hi there Sudarshan21,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    -Griff W.

  • Blank screen during calls/alarms after updating to...

    Hello. I really need your advice. The problem is that I have blank screen during all calls and alarms and worst thing is that menu and shutdown keys isn't working idher. I can't do anything when I have a call or when I want to shut down alarm clock. Everything worked fine with Symbian Belle but this **bleep** started after I updated it to Belle. So what should I do in this case. Any advices? Thak you
    Solved!
    Go to Solution.

    Hi ausrius517,
    Sorry to hear you are having a problem with your device.
    Have you tried performing the following resets to see if it will solve your issue:
    Soft Reset - this will not delete and data off your device.
    Enter *#7780# into your phone's keypad and when prompted, enter 12345 (default code)
    If there are not too much data on your device and you have made a backup, you can go for the hard reset option below.
    Hard Reset - this will wipe all data off your device, so a backup is recommeded before doing this.
    Enter *#7370# into your phone's keypad and when prompted, enter 12345 (default code)
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • T400 blank screen during games

    I have a t400 with windows xp and 3gb of ram (an original 1gb stick and a 2gb that I added)
    I have had my t400 with this configuration for two years, and a few days ago I started having a problem similar to the blank screen on resume I've read about here, except it happens while playing memory-intensive games (civ4, half life 2, cod2 have all exhibited this behavior)
    The screen goes completely blank (no backlight) after only 5-10 minutes in the game, and the only way to get out of it is a hard restart. I have tried all kinds of Fn combinations and tried using an external display. I've updated my bios, display drivers, and power manager drivers. I disabled switchable graphics in the bios, and the problem still occurs with discrete graphics. I haven't tried using internal graphics, but that's not an ideal solution.
    A couple of the times this has happened, I have gotten a 'windows experienced a serious error' window on starting back up.The crash dump always looks like this.
    On Thu 6/10/2010 7:17:42 AM your computer crashed
    This was likely caused by the following module: ati2cqag.dll
    Bugcheck code: 0xEA (0x83D117C8, 0x84399118, 0x8782C918, 0x1)
    Error: THREAD_STUCK_IN_DEVICE_DRIVER
    Dump file: C:\WINDOWS\Minidump\Mini061010-01.dmp
    file path: C:\WINDOWS\system32\ati2cqag.dll
    product: ATI Radeon Family
    company: ATI Technologies Inc.
    description: Central Memory Manager / Queue Server Module
    Does anyone know what could be causing this?

    yes, this would explain the error.
    Hum, you probably need to send the laptop in for service. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • How to blank screen during music usage with Apple TV.

    How do a select a blank screen as a screen saver when listening to music. I would like to save energy and minimize tv screen usage.  I don't want to show pictures or anything. My screen is currently on all day as I listen to music. Any adjustments with my Samsung tv during Apple TV stops Apple TV. I have an Apple TV 3.

    Like I said, the Tv would need to be on unless connected via optical, that is not software related. Not a lot of energy would be saved by having a blank screen. The majority do use the screensaver to showcase their pictures and there wouldn't be a lot of call for having a blank screen.
    If you really feel like you want to you can provide feedback directly
    https://www.apple.com/feedback/

  • Black screen during any game ion my ipad 3 6.1.2

    Black screen appear suddenly during playing games on my IPad 3 for 2 days . It was rare happen but today has became annoying
    Please help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Lumia 800 constant blank screen during calls

    hi guys,
    I have a nokia lumia 800,
    when im on a call the screen stays blank so i cant access any of the in call options? i dont have a screen protector on the phone, i have run the diagnostics app and the the proximity sensor is responding fine!!! so it leads me to think its a software issue? is this a common problem or am i doing something wrong?
    hope you can help.
    daniel

    The screen gets turned off during a phone call when the proximity sensor is covered. This is done to avoid accidental touch screen actions when you are in a call.
    If the screen gets turned off immediately when dialing a number or receiving a call, check that your phone does not have any object which may cause detection. There are various non-Nokia original screen protectors sold in the market which cover the proximity sensor causing blank screen issues during calls.
    You can take the following steps to check the issue. If the screen keeps turned off, the protector may not be of the right size and will block the sensor on the upper part of the front side. Then either remove the protector or cut off the plastic from the blocking area.
    Make or receive a call with the phone.
    Once the phone is in a call place your hand 1cm above the screen and display will turn off.
    Remove your hand and display shall turn back on.
    Repeat the test steps 1,2,3 for 3 times to verify the proximity sensor function.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Lumia 930 blank screen during call

    My Lumia 930 screen goes blank during all calls. Iti is black whether the phone is next to my ear or not. In practice I cannot end a call or do anything else cause the screen keyboard is not available.
    My son has a Lumia 920 which had very much the same problem but it was somehow fixed when the device was at Nokia service last year because of some camera problems. No idea still about the root cause of that case either.
    Any idea how to fix my blank screen problem?

    I have the exact same issue with my brand new Lumia 930 - the screen goes black (a bit randomly) when talking on the phone. I used a trick decribed in a post with the same issue on a 920, which is to firmly wipe just above the N in Nokia in the top right corner on the phone (where the sensors are) which helps. However, it is not really fixing the problem.
    Is there anybody knowing another solution but to return the phone, which feels a bit cumbersome to say the least?
    Thanks,
    Erik

  • [MOOT] UEFI USB Install (from 201306 image) - blank screen during boot

    I am trying to install Arch Linux on a Lenovo ThinkPad T431s. 
    I created a bootable UEFI USB disk image following the instructions on the wiki.
    https://wiki.archlinux.org/index.php/UE … B_from_ISO
    Attempting to boot from this image I get to a screen that looks like:
    Arch Linux archiso x86_64 UEFI USB
    UEFI Shell x86_64 v1
    UEFI Shell x86_64 v2
    After selecting the first option, I get a blank screen.
    This appears to be the same (or very similar) to the following issues:
    [1] https://bbs.archlinux.org/viewtopic.php?id=151599
    [2] https://bbs.archlinux.org/viewtopic.php?id=158530
    As suggested by
    https://wiki.archlinux.org/index.php/Beginners'_Guide#Preparation
    I tried appending a number of things to the initrd line
    nomodeset
    video=SVIDEO-1:d
    i915.modeset=0
    with no success (the blank screen was exactly the same).
    Some posts in thread [2] indicated that booting in legacy bios mode worked.  I created a new disk image (again following the wiki instructions: https://wiki.archlinux.org/index.php/US … ion_Media) and was able to confirm that I could successfully boot from this other image after switching into legacy mode.
    In thread [1], there was the suggestion to go into a UEFI shell and try a command like
    Shell > fs0:
    FS0:\ > cd \arch\boot\x86_64
    FS0:\arch\boot\x86_64\ > vmlinuz archisobasedir=arch archisolabel=ARCH_201306 initrd=\arch\boot\x86_64\archiso.img
    which I did.  After pressing enter nothing happened (the screen did not go blank, all the text remained, no messages appeared).
    Eventually in that same thread, a workaround was suggested in this post.  I have not tried this because I was unable to understand what exactly was being done, both because of the terse nature of the post and the fact that the referenced article is not in a language which I read (and google translate did not make it clear enough).  I was unable to evaluate whether that was a sensible thing to do.
    Now, finally, the questions
    Firstly, does anyone have any suggestions about how to solve or troubleshoot my blank screen issue?
    If not, does anyone have an opinion about which of the workarounds (switching into legacy mode or the one that I don't quite understand yet) would be better?  I am not planning to dual boot the system, so I do not need to use UEFI to be win8 friendly, etc.
    Last edited by wesphys (2013-06-07 14:36:28)

    Auric wrote:
    Neri, did you get any further with this? I just got my own Thinkpad Yoga and am facing the same problems. Everything works fine in legacy Boot but the screen stays black on UEFI boot regardless of the known workarounds.
    might it help to first install using legacy boot and later on convert to UEFI?
    Not really with Arch directly anyways. What you can do is:
    1. Use Fedora 20 USB to boot the sucker up
    2. Use Archlinux-bootstrap install (download expand etc)
    3. Use refind as the bootmanager seems to solve the dual boot issues
    ATM i'm fighting a mkinitcpio segfault. But that is after the installation was basically successful.  It would be nice if we can find a way to fix the install medium ...
    EDIT:
    All sorted out. Unfortunately you'll have to bypass the Archlinux Install medium and resort to the fedora 20 installer. I used the XFCE4
    version for a smaller download.
    Here are the basic steps for a Dual-Boot setup:
    In windows (Disk Management) truncate your C: Drive.  I ended up making basically what will became /dev/sda4 smaller and didn't not
    touch any partition or free space before that. Here's the final Layout:
    /dev/sda:
        empty space
    1. recovery partition
    2. ESP
    3. reserved
    4. windows
    5. Linux Root
    6. Linux home
    7. Swap
    The installation happened from within Fedora Live using an Archlinux Boot strap image according to the Wiki for installing from an
    existing Linux and the Wiki Installation Guide.  I mounted /dev/sda2 (aka. the existing ESP partition) as /boot and installed refind
    according to the wiki. Please note, when you install Arch through the archlinux bootstrap method make sure you  pacman -S archlinux-keyring
    in the bootstrap chroot first before you run the pacstrap command - it will accelerate the process tremendously!
    Last edited by neri (2014-01-02 21:40:31)

  • CP8 - White/blank screen during pre-load when the pre-loader is set to below 100%

    My Captivate 8 project contains an hour of audio. When my pre-loader is set to 100% the course takes about 2.5 minutes to load. To reduce load time, I have experimented with reducing the pre-loader below 100%. However, when the pre-loader is set to anything less than 100%, my course shows a white/blank screen after the preloader and before the audio begins to play. The white screen is shown for about 10-20 seconds. The white screen gives the impression that the course has not loaded properly. Does anyone have any suggestions?

    I am trying to reproduce the issue at my end, I used an audio which is about an hour long and broke it slide-by-slide as you mentioned. But I don't see any white screen before or after changing the pre-loader percentage. I even tried setting it as low as 10% but still no blank screen. I doubt this can be specific to the audio file or may some other element in project is causing the issue. Is it possible for you to share the project so we can debug the issue? My email address is [email protected]

  • Blank Screen during boot Win XP Pro

    When i boot my computer (specs below) the Corecell logo comes up for a few seconds, the the screen will go blank for most of the rest of the boot.  it'll go about 45 seconds with a blank screen, then finally the windows XP logo will come on the screen, then a few seconds later, the windows desktop appears.  Also seems that the first 30 seconds or so of this blank screen, the hard drive LED isn't showing activity, then finally it'll kick in and the Windows XP logo shows up shortly after.
    no big deal really, just wondering why i get this blank screen.  We have tons of Win XP pro machines at my job, and none of them boot with this blank screen.  I have seen other Win XP machines do this here and there, any ideas why?
    - Kip
    (just wanted to clarify what i mean by "blank".  i mean black screen.  video signal is being fed to the screen, just nothing but the black.)

    My God! You're running XP!!   Have you upgraded from 2000? Do you have any autostart program connected to an instant messaging or SQL server?
    http://forums1.itrc.hp.com/service/forums/questionanswer.do?admit=716493758+1080242655589+28353475&threadId=204094
    http://support.microsoft.com/default.aspx?scid=kb;en-us;248353

  • Iphone 3g blank screen during calls

    I bought a 3g last week to replace an original iphone that had stopped working. Everything seemed to work on the new phone except that during calls the screen would go blank and I could not get it back by holding it away from my ear, hitting the Home button, or anything else except the on/off button at the top, which ended the call. I was on the phone with apple tech support for several hours, trying all sorts of things that didn't solve the problem.
    Then my grandson came home and looked at my phone. He surmised that the case, which I had transferred from my original iphone, was blocking the sensors. This turned out to be correct. If I push the phone slightly out of the case when on a call, the screen works just fine.
    I decided to post this in case some one else runs into the same problem.

    As soon as you said that the screen didn't come on, my first question was going to be are you using the original iPhone case? The proximity sensors on the 3G are positioned a little differently than the original phone.

  • Iphone blank screen during call

    I have developed a problem with my iphone over the last few weeks. When I make a phone call the screen blanks out as expected during the call however if I take the phone away from ear to end the call/use keypad etc the screen will not come back? Is anyone lse is experienceing this issue? is there a way to fix it?

    Remove the case from your iphone and see if that resolves the issue.
    Your case is likely blocking the sensor.

  • Random blank screen in 3d games NEO-FIS2R

    Hi, I just built a computer with the 875P NEO-FIS2R, 2.8C, geforce 4 ti-4200.  After resolving some of my dual channel DDR problems, I stuck in a single bank of pc2100 RAM and things work fine until I play a 3D game when the screen will randomly blank out forcing me to reboot.  Any ideas?  I'm using a 420watt channelwell PSU, all fans are working (4 case fans, 2PSU fans, gpu fan, cpu fan).
    THANKS!

    At first birdbreast,the moderatores here are no employees of MSI,so the pretty sure dont tell lies,they just told u what they think,can u live with that,good.
    Check http://www.asusboards.com forums,there are a lot of probs regarding readon 9xxx cards together with Canterwood/Springdale boards,not just MSI.
    Now to the current prob here,bit odd,running ti4200 together with pc2100 ram as well,no probs.
    Have u installed the Intel INF drivers?
    Regarding Gfxcard probs I just found a hint like that on asusboards.com,but tbh I dont know what he´s talkin about
    Alphy:"Im having a HORRIBLE time trying to get my P4P800 and my Radeon 9700 to get to work. Ive reformated and used 3.2, 3.3, and 3.4 drivers and it will work fine until I get to the Windows Login screen. Then my monitor just goes black and like 50% of the time the computer will restart...Anyone know what the deal is?"
    Think that sounds a bit similar,even if its a readon.
    Here´s the hint Merkor gave him,worked for one guy.
    "Originally posted by Merkor
    @Alphy: Never ever use the "Large System Cache enabled" tweak option in the registry or in tweakers!! It could cause the described behaviour... "
    Another one tried to set AGP/PCI clock fix and lowering AGP mb value in bios,he said it did help,dunno,just give it a try.

  • Blank screen after downloading game

    I put Bejeweled on my computer from the disc, I get music but nothing on the screen. Screen appears to be a very dark blue, I have to ctrl, alt, delete to get out. I can play this game w no problem on the pogo website...if that matters.
    Does anyone have any ideas? 
    Thank you!!!!
    Lynn

    Try removing and reinstalling the game and reboot and make sure you have the latest driver for your video card.

Maybe you are looking for