Blank screen everytime I log in

Hi there, this just started this morning when I fired up my laptop after it had been shut down for the night I entered my password and it just goes to a blanks screen. The background LED light comes on but thats it. I've tried restarting and putting it into sleep mode and signing back in multiple times and nothing. The only thing I can access is task manager after ctrl alt del is done and from there I can open individual programs but woop-dee-doo. This is a Lenovo Ideapad S510p touch screen laptop. Please help!

Hi All,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with black screen in your laptop.
Try to reinstall the operating system and check for the issue. Before reinstalling the operating system please take a data backup.
Hope this helps. Do post back if issue persists!
Best regards,       
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Why do I get a blank screen when I log in to ExportPDF?

    When I access Export PDF through this link, I get a blank screen with only the option to cancel.  Is there another link I should be using?  https://cloud.acrobat.com/exportpdf

    Hi export pdf,
    That is indeed the correct link. Please clear your browser cache and try again. Or, try a dfferent web browser (see System requirements | Acrobat.com for a list of compatible web browsers.)
    Best,
    Sara

  • One section of one web site gives "The parameter is incorrect" only after I log into the site and only a blank screen?

    "The parameter is incorrect" is the error msg. on a blank screen when I log in to a particular web site.
    Of many tabs at the site only one gives this error.
    Without logging in I can navigate as I desire.
    I access this site on a daily basis. Using Safari is no problem at all.
    FF 16.0.2 on a mac 10.6.8 this also occurred before upgrade to 16.0.2
    I have not applied any bells or whistles to FF . . to my knowledge.
    Bob

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"

  • If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

    If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

    OUtlook was already set as the mail client for FF, and is my operating system (XP)'s default mail programme. therefore problem not solved at all. what I get whenever I follow a link in a webpage to send an e-mail is a little pop up window asking me to sign in to gmail or open an account. any other suggestions?

  • Blank screen with cursor after logging in

    After upgrading to Windows 8.1 from windows 8 (which took much much longer than a clean installation),on being prompted to log in, all I see is a blank screen (the cursor works though) after logging in. Upon doing a lot of googling, I am utterly confused
    about the issue and its possible solutions. Can you give me a definite solution to this? The task manager opens via alt+ctrl+del, explorer.exe is not running and that sums up everything I can do with my swanky new Windows 8.1. The following are my
    laptop specs
    Dell Inspiron 17R 7720 SE
    Intel i5
    nVIDIA GT 650m 2 gigs
    Its getting really frustrating, and I am thinking of reverting to 7 once again.

    Hi
    Please create dump files for better understanding what exactly happen here. Also check your event viewer.
    Maybe some 3rd party application caused this issue, I suggest perform clean boot as well to eliminate 3rd party SW issue

  • Osx 10.8 blank screen when logging in

    Hi All,
    I'm a new mac user.
    I have a mbpr (8/512) and when I boot up and log in, it always has a blank screen.
    I press Apple + Q and a few other keys, they all seem to work because it makes a sound but the screen is always blank.
    I then have to hold down power to shut it off. I turn it on again, on 2nd boot up and login, it says something like "some programs may have caused problems with your login in last time so press ok to proceed to login with these programs open or cancel to start fresh".
    The thing is, i'm lucky if I get prompted with this because sometimes I have to repeatedly reboot the mac 3-4 times before it 'recognises' there was a problem and it asks me that question before logging in.
    How do I troubleshoot this problem?
    Thanks.

    I am only passing on what I have read following experiencing similar issues with my r MBP, I visited the Apple store where the only option was to perform a reinstall as other than the black screen I could not get my Apple Mail working, after about 1 hour the was no obvious solution to the problem so the reinstall. There were two items that I read about that may have caused the problems, I was running the screen resolution at one stage up from the best for retina setting and it was suggested this may be causing me to experience the black screen, I migrated my settings over using the migration assistant, this was suggested as a possible cause as shortly after the latest OS upgrade included some improvements to migration assistent, Apple are a little vague as to what it fixed though. The computer has been perfect since then but I have not moved from the best for retina setting, as a Photoshop user moving from a 17" MBP I was missing the screen size hence moving up to the higher resolution, I will wait for Adobe to get their revised optimised for retina update out !

  • When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen show a blank screen with the heading accessing  iTunes. If I go to the right side and search the store the names drop down. Nothing happens

    When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen shows a blank screen with the heading "accessing  iTunes". If I go to the right side and search the store the "search names" drop down. Then nothing happens. My iTunes store account info is shown on the right side
    I am using a Dell Vostro 3400, with 8 GB RAM, Windows 7 64bit Ultimate OS. ITunes version 10.5? (Latest)
    What I have tried:
    Uninstalled iTunes,
    Removed firewall and protection.
    Re-installed iTunes 64bit (still get the same issue)
    Restarted firewall, added apple.com etc.
    I have created a new user profile to no vail.
    Still the same issue. I can access using my iPod 

    I am having the same problem ever since I upgraded.  Have received four emails from Apple support on the
    issue and nothing has worked.  Unloaded 10.5 and went back to 10.3 which worked fine but it would not allow
    me to sync my Iphone with the ios 5 upgrade.  Went back to 10.5 and sometimes get exactly what you do when
    I try an access the store.  It looks like something is clearly missing.  Have done just about everything I have seen
    on threads but nothing works.  Really need help.

  • Mac keeps logging out and blanking screen.

    hi.
    for some reason my mac just keeps logging out and blanking the screen at random points each day.
    its VERY weird.
    is there anything i can do about it?

    There are a number of things that you could try - resetting SMC and PRAM, doing an Apple Hardware Test, reinstalling system software, etc.
    But, if I were you, I'd take the unit into an Apple Store or an AASP. But be certain that you backup all of your data before you take it in.
    When there's no rhyme nor reason to restarts and 'blank screens' on a daily basis, it's best just to let Apple handle it - they can run tests that aren't available to mere mortals. Could be anything...
    Clinton

  • Following a message saying that my Startup disc was full and advising me to delete some files, I deleted my trash but then apps started to fail. When I tried to log on again, all I got was a blank screen and a cursor. I am a Mac Book Pro virgin, help

    Following a message saying that my Startup disc was full and advising me to delete some files, I deleted my trash but then apps started to fail. When I tried to log on again, all I got was a blank screen and a cursor, so I am unable to delete any more files. I am a Mac Book Pro virgin, help

    How much free space do you actually have? Go to the Apple menu and select About This Mac... More Info... and click on the Storage tab. You should see something like this...
    This will show you how much free space you have and what's taking up all the space on your hard drive. You may need to backup and trash some seldom used files, applications, etc. You have to drag them into the Trash and empty the trash to regain the space. A general rule of thumb is that you should have about 15% of your hard drive storage free.
    Good luck,
    Clinton

  • Blank screen after logging off

    I Logged out of my MacBook Pro instead of shutting down, and I have a blank screen that is not letting me log back on. I tried to shut down by holding down the power button, and it doesn't even go off. I'm stuck not being able to log on. I just have a blank screen. Help!

    Got it.

  • Blank screen after log-in!

    I'm able to turn my computer on, once I reach the log in screen it's still working fine but right after I log in it's a blank screen. All the lights are on and I can see the mouse on the screen..help!!!

    Refer to this document to try to resolve your problem.
    http://support.hp.com/us-en/document/nph00225
    If unsuccessful you may to Factory Restore your system.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • After logging on you yahoo this am, my calendar and notepad are gone. When I click on them I just get a blank screen. I am not very computer literate and need help getting them back.

    When I usually go into yahoo mail, there is an icon at the top left hand side to access my calendar and notepad. They are both gone, but there is a field in the bottom left corner that has the buttons. When I click on either one, I just get a blank screen. I've not updated by Firefox to a new version and can't imagine what happened overnight.

    This sounds more like it's a temporary problem with Yahoo's mail website. My advice at this point is to see if this fixes itself within a few hours. If not, please come back (actually, do come back regardless and let us know if your problem is solved).

  • HT3678 Everytime I do a Photo sequence my video is just a black blank screen? what did do wrong?

    I just installed Quicktime 7, purchase my registration code, registrate, add some pictures for a sequence, and one hour late, everything that my video shows is a black blank screen? what a dissapointment , what did i  do wrong?

    Display shows a white screen
    Try turning iPhone off and then on again.
    If the iPhone will not turn off, try to reset it.
    If that doesn't work, try restoring the device

  • What causes a blank screen instead of the log in screen

    What would cause a blank screen when turning on desktop?

    On the about:newtab page in the upper right hand corner, is there an option to change the blank page to Classic or another option?
    Does this happen in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]

  • New Install - startx results in blank screen with mouse cursor

    I installed Arch on my desktop last week with no issues, so I wanted to install it on an old THinkpad R31. Everything with the installation went smooth, but when I try to 'startx' all I get is a blank screen with a mouse cursor that I can move around. I've installed xorg-xinit, xorg-twm, xorg-xclock, and xterm.
    I'm not getting any significant errors in the logs, or even the terminal I issue 'startx' in.
    I'm not sure what the problem could be...
    Here is my output from 'startx'
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.6.0-1-ARCH i686
    Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
    Build Date: 05 October 2012 02:01:30PM
    Current version of pixman: 0.26.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    xinit: connection to X server lost
    waiting for X server to shut down XIO: fatal IO error 0 (Success) on X server ":0"
    after 554 requests (554 known processed) with 0 events remaining.
    xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
    xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
    xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
    Server terminated successfully (0). Closing log file.
    xinit: unexpected signal 2
    And my Xorg.0.log
    [ 4955.478]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 4955.479] X Protocol Version 11, Revision 0
    [ 4955.479] Build Operating System: Linux 3.6.0-1-ARCH i686
    [ 4955.479] Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
    [ 4955.479] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
    [ 4955.479] Build Date: 05 October 2012 02:01:30PM
    [ 4955.479]
    [ 4955.479] Current version of pixman: 0.26.2
    [ 4955.479] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4955.479] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4955.480] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
    [ 4955.480] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4955.480] (==) No Layout section. Using the first Screen section.
    [ 4955.480] (==) No screen section available. Using defaults.
    [ 4955.480] (**) |-->Screen "Default Screen Section" (0)
    [ 4955.480] (**) | |-->Monitor "<default monitor>"
    [ 4955.481] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 4955.481] (==) Automatically adding devices
    [ 4955.481] (==) Automatically enabling devices
    [ 4955.481] (==) Automatically adding GPU devices
    [ 4955.481] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 4955.481] Entry deleted from font path.
    [ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 4955.481] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 4955.481] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 4955.481] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 4955.481] (II) Loader magic: 0x825a620
    [ 4955.482] (II) Module ABI versions:
    [ 4955.482] X.Org ANSI C Emulation: 0.4
    [ 4955.482] X.Org Video Driver: 13.0
    [ 4955.482] X.Org XInput driver : 18.0
    [ 4955.482] X.Org Server Extension : 7.0
    [ 4955.484] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 4955.486] (--) PCI:*(0:0:2:0) 8086:3577:1014:0505 rev 4, Mem @ 0x98000000/134217728, 0x90100000/524288
    [ 4955.486] (--) PCI: (0:0:2:1) 8086:3577:1014:0505 rev 0, Mem @ 0x88000000/134217728, 0x80200000/524288
    [ 4955.486] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 4955.486] Initializing built-in extension Generic Event Extension
    [ 4955.486] Initializing built-in extension SHAPE
    [ 4955.486] Initializing built-in extension MIT-SHM
    [ 4955.486] Initializing built-in extension XInputExtension
    [ 4955.486] Initializing built-in extension XTEST
    [ 4955.486] Initializing built-in extension BIG-REQUESTS
    [ 4955.486] Initializing built-in extension SYNC
    [ 4955.487] Initializing built-in extension XKEYBOARD
    [ 4955.487] Initializing built-in extension XC-MISC
    [ 4955.487] Initializing built-in extension SECURITY
    [ 4955.487] Initializing built-in extension XINERAMA
    [ 4955.487] Initializing built-in extension XFIXES
    [ 4955.487] Initializing built-in extension RENDER
    [ 4955.487] Initializing built-in extension RANDR
    [ 4955.487] Initializing built-in extension COMPOSITE
    [ 4955.487] Initializing built-in extension DAMAGE
    [ 4955.487] Initializing built-in extension MIT-SCREEN-SAVER
    [ 4955.487] Initializing built-in extension DOUBLE-BUFFER
    [ 4955.487] Initializing built-in extension RECORD
    [ 4955.487] Initializing built-in extension DPMS
    [ 4955.487] Initializing built-in extension X-Resource
    [ 4955.487] Initializing built-in extension XVideo
    [ 4955.487] Initializing built-in extension XVideo-MotionCompensation
    [ 4955.487] Initializing built-in extension XFree86-VidModeExtension
    [ 4955.487] Initializing built-in extension XFree86-DGA
    [ 4955.487] Initializing built-in extension XFree86-DRI
    [ 4955.487] Initializing built-in extension DRI2
    [ 4955.487] (II) LoadModule: "glx"
    [ 4955.488] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 4955.489] (II) Module glx: vendor="X.Org Foundation"
    [ 4955.489] compiled for 1.13.0, module version = 1.0.0
    [ 4955.489] ABI class: X.Org Server Extension, version 7.0
    [ 4955.489] (==) AIGLX enabled
    [ 4955.489] Loading extension GLX
    [ 4955.489] (==) Matched intel as autoconfigured driver 0
    [ 4955.489] (==) Matched intel as autoconfigured driver 1
    [ 4955.489] (==) Matched vesa as autoconfigured driver 2
    [ 4955.489] (==) Matched modesetting as autoconfigured driver 3
    [ 4955.489] (==) Matched fbdev as autoconfigured driver 4
    [ 4955.489] (==) Assigned the driver to the xf86ConfigLayout
    [ 4955.489] (II) LoadModule: "intel"
    [ 4955.490] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 4955.491] (II) Module intel: vendor="X.Org Foundation"
    [ 4955.491] compiled for 1.13.0, module version = 2.20.9
    [ 4955.491] Module class: X.Org Video Driver
    [ 4955.491] ABI class: X.Org Video Driver, version 13.0
    [ 4955.491] (II) LoadModule: "vesa"
    [ 4955.491] (WW) Warning, couldn't open module vesa
    [ 4955.491] (II) UnloadModule: "vesa"
    [ 4955.492] (II) Unloading vesa
    [ 4955.492] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 4955.492] (II) LoadModule: "modesetting"
    [ 4955.492] (WW) Warning, couldn't open module modesetting
    [ 4955.492] (II) UnloadModule: "modesetting"
    [ 4955.492] (II) Unloading modesetting
    [ 4955.492] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 4955.493] (II) LoadModule: "fbdev"
    [ 4955.493] (WW) Warning, couldn't open module fbdev
    [ 4955.493] (II) UnloadModule: "fbdev"
    [ 4955.493] (II) Unloading fbdev
    [ 4955.493] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 4955.493] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 4955.496] (--) using VT number 7
    [ 4955.508] (II) intel(0): using device path '/dev/dri/card0'
    [ 4955.509] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 4955.509] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 4955.509] (==) intel(0): RGB weight 888
    [ 4955.509] (==) intel(0): Default visual is TrueColor
    [ 4955.509] (--) intel(0): Integrated Graphics Chipset: Intel(R) i830M
    [ 4955.509] (**) intel(0): Relaxed fencing disabled
    [ 4955.509] (**) intel(0): Wait on SwapBuffers? enabled
    [ 4955.509] (**) intel(0): Triple buffering? enabled
    [ 4955.509] (**) intel(0): Framebuffer tiled
    [ 4955.510] (**) intel(0): Pixmaps tiled
    [ 4955.510] (**) intel(0): 3D buffers tiled
    [ 4955.510] (**) intel(0): SwapBuffers wait enabled
    [ 4955.510] (==) intel(0): video overlay key set to 0x101fe
    [ 4955.593] (II) intel(0): Output VGA1 has no monitor section
    [ 4955.593] (II) intel(0): Output LVDS1 has no monitor section
    [ 4955.594] (--) intel(0): found backlight control interface /sys/class/backlight/thinkpad_screen
    [ 4955.676] (II) intel(0): EDID for output VGA1
    [ 4955.677] (II) intel(0): Printing probed modes for output VGA1
    [ 4955.677] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 4955.677] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 4955.677] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 4955.677] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 4955.677] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
    [ 4955.677] (II) intel(0): EDID for output LVDS1
    [ 4955.677] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 4955.677] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 4955.678] (II) intel(0): Printing probed modes for output LVDS1
    [ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz P)
    [ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 4955.678] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 4955.678] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 4955.678] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 4955.678] (II) intel(0): Output VGA1 connected
    [ 4955.678] (II) intel(0): Output LVDS1 connected
    [ 4955.678] (II) intel(0): Using exact sizes for initial modes
    [ 4955.678] (II) intel(0): Output VGA1 using initial mode 1024x768
    [ 4955.678] (II) intel(0): Output LVDS1 using initial mode 1024x768
    [ 4955.678] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 4955.678] (II) intel(0): Kernel page flipping support detected, enabling
    [ 4955.678] (==) intel(0): DPI set to (96, 96)
    [ 4955.678] (II) Loading sub module "fb"
    [ 4955.678] (II) LoadModule: "fb"
    [ 4955.679] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 4955.679] (II) Module fb: vendor="X.Org Foundation"
    [ 4955.679] compiled for 1.13.0, module version = 1.0.0
    [ 4955.679] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4955.679] (II) Loading sub module "dri2"
    [ 4955.679] (II) LoadModule: "dri2"
    [ 4955.680] (II) Module "dri2" already built-in
    [ 4955.680] (==) Depth 24 pixmap format is 32 bpp
    [ 4955.680] (II) intel(0): [DRI2] Setup complete
    [ 4955.680] (II) intel(0): [DRI2] DRI driver: i915
    [ 4955.680] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
    [ 4955.680] (II) UXA(0): Driver registered support for the following operations:
    [ 4955.680] (II) solid
    [ 4955.680] (II) copy
    [ 4955.680] (II) composite (RENDER acceleration)
    [ 4955.680] (II) put_image
    [ 4955.680] (II) get_image
    [ 4955.680] (==) intel(0): Backing store disabled
    [ 4955.680] (==) intel(0): Silken mouse enabled
    [ 4955.681] (II) intel(0): Initializing HW Cursor
    [ 4955.681] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 4955.684] (==) intel(0): DPMS enabled
    [ 4955.684] (==) intel(0): Intel XvMC decoder disabled
    [ 4955.684] (II) intel(0): Set up overlay video
    [ 4955.684] (II) intel(0): direct rendering: DRI2 Enabled
    [ 4955.684] (==) intel(0): hotplug detection: "enabled"
    [ 4955.983] (--) RandR disabled
    [ 4956.021] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 4956.021] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context
    [ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 4956.021] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 4956.021] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 4956.021] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 4956.021] (II) AIGLX: Loaded and initialized i915
    [ 4956.022] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 4956.023] (II) intel(0): Setting screen physical size to 270 x 203
    [ 4956.124] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 4956.124] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 4956.124] (II) LoadModule: "evdev"
    [ 4956.124] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 4956.125] (II) Module evdev: vendor="X.Org Foundation"
    [ 4956.125] compiled for 1.13.0, module version = 2.7.3
    [ 4956.125] Module class: X.Org XInput Driver
    [ 4956.125] ABI class: X.Org XInput driver, version 18.0
    [ 4956.125] (II) Using input driver 'evdev' for 'Power Button'
    [ 4956.125] (**) Power Button: always reports core events
    [ 4956.125] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 4956.126] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 4956.126] (--) evdev: Power Button: Found keys
    [ 4956.126] (II) evdev: Power Button: Configuring as keyboard
    [ 4956.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 4956.126] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 4956.126] (**) Option "xkb_rules" "evdev"
    [ 4956.126] (**) Option "xkb_model" "evdev"
    [ 4956.126] (**) Option "xkb_layout" "us"
    [ 4956.197] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
    [ 4956.198] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 4956.198] (II) Using input driver 'evdev' for 'Video Bus'
    [ 4956.198] (**) Video Bus: always reports core events
    [ 4956.198] (**) evdev: Video Bus: Device: "/dev/input/event2"
    [ 4956.198] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 4956.198] (--) evdev: Video Bus: Found keys
    [ 4956.198] (II) evdev: Video Bus: Configuring as keyboard
    [ 4956.198] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input2/event2"
    [ 4956.198] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 4956.198] (**) Option "xkb_rules" "evdev"
    [ 4956.198] (**) Option "xkb_model" "evdev"
    [ 4956.198] (**) Option "xkb_layout" "us"
    [ 4956.200] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 4956.200] (II) No input driver specified, ignoring this device.
    [ 4956.200] (II) This device may have been added with another device file.
    [ 4956.201] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 4956.201] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 4956.201] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 4956.202] (**) Sleep Button: always reports core events
    [ 4956.202] (**) evdev: Sleep Button: Device: "/dev/input/event1"
    [ 4956.202] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 4956.202] (--) evdev: Sleep Button: Found keys
    [ 4956.202] (II) evdev: Sleep Button: Configuring as keyboard
    [ 4956.202] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
    [ 4956.202] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 4956.202] (**) Option "xkb_rules" "evdev"
    [ 4956.202] (**) Option "xkb_model" "evdev"
    [ 4956.202] (**) Option "xkb_layout" "us"
    [ 4956.204] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 4956.205] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 4956.205] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 4956.205] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 4956.205] (**) AT Translated Set 2 keyboard: always reports core events
    [ 4956.205] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 4956.205] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 4956.205] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 4956.205] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 4956.205] (**) Option "xkb_rules" "evdev"
    [ 4956.206] (**) Option "xkb_model" "evdev"
    [ 4956.206] (**) Option "xkb_layout" "us"
    [ 4956.208] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
    [ 4956.208] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 4956.208] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 4956.208] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 4956.208] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 4956.208] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
    [ 4956.208] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 10)
    [ 4956.209] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 4956.210] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
    [ 4956.210] (II) No input driver specified, ignoring this device.
    [ 4956.210] (II) This device may have been added with another device file.
    [ 4956.211] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 4956.211] (II) No input driver specified, ignoring this device.
    [ 4956.211] (II) This device may have been added with another device file.
    [ 4956.213] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
    [ 4956.213] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 4956.213] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 4956.213] (**) ThinkPad Extra Buttons: always reports core events
    [ 4956.213] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
    [ 4956.214] (--) evdev: ThinkPad Extra Buttons: Vendor 0x1014 Product 0x5054
    [ 4956.214] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 4956.214] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 4956.214] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
    [ 4956.214] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 11)
    [ 4956.214] (**) Option "xkb_rules" "evdev"
    [ 4956.214] (**) Option "xkb_model" "evdev"
    [ 4956.214] (**) Option "xkb_layout" "us"
    [ 4960.630] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 4964.186] (II) evdev: ThinkPad Extra Buttons: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: TPPS/2 IBM TrackPoint: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: Sleep Button: Close
    [ 4964.189] (II) UnloadModule: "evdev"
    [ 4964.189] (II) evdev: Video Bus: Close
    [ 4964.190] (II) UnloadModule: "evdev"
    [ 4964.190] (II) evdev: Power Button: Close
    [ 4964.190] (II) UnloadModule: "evdev"
    [ 4964.192] Server terminated successfully (0). Closing log file.

    karol wrote:
    Leonid.I wrote:@0x001A4:
    To run twm, you need to install xorg-twm from [extra] (I am not sure if it installs by default). Do you have xterm installed?
    According to his first post he has both xorg-twm and xterm installed.
    I do indeed.
    I went ahead and installed LXDE anyways, just to see what would happen. Exact same thing, it looks like everything is about to load but only the mouse cursor shows up. My Xorg.0.log is the same, so I won't post it again.
    I do get an error in the console about the openbox menu.xml file missing but I doubt that's related.
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.6.0-1-ARCH i686
    Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
    Build Date: 05 October 2012 02:01:30PM
    Current version of pixman: 0.26.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 15 18:12:28 2012
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    Openbox-Message: Unable to find a valid menu file "/usr/share/lxde/openbox/menu.xml"
    xinit: connection to X server lost
    waiting for X server to shut down pcmanfm: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
    after 2326 requests (2323 known processed) with 0 events remaining.
    Server terminated successfully (0). Closing log file.
    xinit: unexpected signal 2
    .xinitrc for my user
    exec ck-launch-session startlxde
    Very wierd.

Maybe you are looking for

  • Problem with updating Photoshop CC in Cloud.

    Update failed. Updating Lightroom Worked. Have a Mac and It worked before. Have reinstalled Cloud according to Adobe's suggestion. Still don´t work.

  • EJB Web Dynpro  - Data Persistence

    What is the recommended way for connecting to oracle database and adding business logic to web dynpro application.? We were researching on the CMP entity bean but found that CMP entity bean in SAP netweaver can be configured only to connect to the de

  • Missing layers in CS5 pdf export :((

    Hello, trying to export a document with 20 pages with 2 page  templates ("Mustervorlage") and 2 layers as PDF (interactive and not  interactive). In some pages the objects of the  background layer are missing. Exporting only one of these pages the  b

  • ISE NEAT switch won't authenticate on Sup32-based 6500

    I have a 3560-CG switch configured as a NEAT supplicant switch. It is working correctly when connected to a 3750G stack running 12.2(55)SE9 but not when connected to a 6500 Sup32-10G running 12.2(33)SXJ8 The authentication is seen in ISE but 802.1X s

  • I cannot open a CS6 project.

    Hi, I have build a project in CS6 and it was working fine until late last night. When I try to open it, it get to 81% and then stops. The software then crashes if I try to do anything. I have deleted some of the source file the project it useing but