Blank screen in front row

Hi There
Every time i try to enter Front Row - I just get a black screen, does anyone have any ideas why this might be?
Hope you can help
Cheers

We have just set my Dad's new 24' iMac up and whilst marveling at front row it has began to just go blank during photo viewing. It's only 2 days old. I have gotten all available updates but it's still happening. Would love to get to the bottom of this one as it is ruining a wonderful feature....

Similar Messages

Why do I get a black screen in front row when watching some iTunes store purchases? esp Cars 2

We bought Cars 2 a few months ago from the iTunes store. The movie won't work in Front Row, we only get a black screen (except for the blue Front Row controls at the bottom) although the audio comes through just fine. The annoying part is all of our other iTunes store movies work fine in Front Row. Just Cars 2 is broken. I don't think that it is an authorisation problem because it plays okay in iTunes, Quicktime, even via airplay to an appleTV or via Home Sharing to our iPad.
The movie is only standard definition so I am guessing that it is not an HDCP issue; I understand that there is only HDCP on HD movies. We are playing it on a Mac Mini (core 2 duo) on a Sony Bravia via a VGA connector.
After a little bit of complaining, apple let us download the movie again in case the file was corrupted, but unfortunately the same problem with the new version.
The computer did have Perian installed at one point, but uninstalling and restarting made no difference.
I have found lots of reports of movies with missing picture in Front Row but these are all ripped videos, never with an iTunes Store purchase.
Apple won't refund our money as the purchase was more than 60 days ago by the time I gave up troubleshooting and reported the problem.

Yeah! Problem solved: It's a QT issue.
Cause: Mac Update Software downloaded a faulty QT.
Solution: Download QT from Apple's QT site.
Great to have the Video back

Front Row broken with 10.9.3 - Mac Mini

I have been running Front Row very happily under OS X 10.9.2 on my Mac Mini and iMac. It's not supported by Apple but, it has been working well.
Yesterday, I updated to iTunes 11.2 and OS X 10.9.3. Front Row now doesn't work properly. It loads and follows the directory tree as before but when opening a video file instead of displaying the file it goes to a blank grey screen (filling the entire display). As before pressing any non-mapped key takes me back to the Desktop suggesting that the blank grey screen is being displayed by Front Row.
This is a problem on my Mac Mini mid-2011. Oddly, however, I'm having no problem with Front Row on my iMac late-2009 which I've also updated with iTunes 11.2 and OS X 10.9.3.
Could there be a change to the graphics in 10.9.3 that affects a Mac Mini differently to an iMac (they have separate but different GPUs) ?
Has anyone seen a grey screen in Front Row before ?
Thanks

Problem fixed itself. Front row is getting more flakey which each release of OS X. One day .......

Front Row Video Conversion

Most of the video files I have I play with VLC beacuse quicktime will not play them. They are avi files. I was wondering if there was some program out there that would convert these files to mp4 or something quicktime can read so ic an play them in front row.
OR if there is a way to change the default player of front row that would be great. VLC is more versatile than quicktime. It will play quicktime files but not the other way around. Thanks!!
Macbook Mac OS X (10.4.9) brand spankin new

You're welcome. The current version of Front Row will only play on the "main" screen. You can choose to "mirror" both displays and then you'll see the same thing on both your built-in screen and the TV or other display. When Mac OS X 10.5 (Leopard) is released later this year, it will include Front Row for everyone. I would send Apple some Mac OS X feedback and let them know you'd like to have an option to select the display screen for Front Row.
-Doug

Displaying Front Row on TV Instead of Computer

I've connected my computer to my HD TV using a DVI-to-HDMI cable, however, even when I set the TV to be the main monitor, when I launch Front Row, it comes up on my laptops screen. How do I make it come up on my TCV screen?

You must have a third party hack like "Insomnia" installed. According to Apple, when you close the lid of a portable Apple computer, it should go to sleep. However, if you have an external keyboard (USB or Bluetooth) attached/paired, AC power plugged in and an external monitor connected then you can wake the computer.
If you have AC power and an external monitor plugged in, you should be able to wake the computer with the Apple remote. This is not documented by Apple, but people here in this forum have had it work.
In addition, people here have reported that they must restart after moving the menubar to the TV to make it the "main" screen before Front Row in Mac OS X 10.5 will recognize this configuration.
-Doug

Does Front Row DVD player have any options and preferences?

Are there any preference options for watching DVD's in Front Row?
I have been watching DVD's on my Mac through the DVD Player which has lots of useful options like Zoom and De-Interlace etc. But DVD player leaves the mouse pointer on screen and Front Row seems to be a better way to watch films.
My problem with Front Row is when I play a DVD like West Wing it needs to be zoomed to fill my 17inch screen and it needs to be played De-Interlaced. I can't find any way to access options in Front Row DVD player to do this. With no mouse pointer I can't get a drop down menu so is there a short cut key that would give me some options?
Thanks
Phil Carr

Welcome to the forums!
But DVD player leaves the mouse pointer on screen
Not if you drag it to the bottom of the screen.
Front Row seems to be a better way to watch films.
Debatable for the reasons you mention!
I much prefer VLC to DVD Player:
You should definitely consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Front Row displays desktop when streaming a TV show from a shared library

I recently bought South Park series 9 from the iTunes store on my iMac. I have a Macbook that is currently being used as a media server, being hooked up to a Samsung LCD TV.
The other day I was happily watching one of the episodes via Front Row on my Macbook through the TV, when it suddenly displayed the error message "Cannot play this video" (Or similar). When I went to go back into the episode, it displayed the "There are no shared movies" error message.
After a while, I eventually re-connected to the iMac library, but now when I select a video, it displays the "Loading video..." screen in Front Row, then plays the Audio, but displays the desktop, as if Front Row is not there.
When the video plays in iTunes it plays fine, and this only happens with the shared videos in the iMac's iTunes library.
Anyone have any ideas?

CubaMAN is correct. This issue is due to the most recent version of iTunes. It's also, specifically, due to the version of iTunes on the computer that's running Front Row, not the computer that's sharing the videos. I would suggest you send Apple some iTunes feedback. There's an option for a "feedback type" of "Bug Report":
http://www.apple.com/feedback/itunesapp.html
If you can, temporarily, move the videos to the MacBook, they'll play just fine directly.
-Doug

Front Row and 4:3 Aspect Ratio

Hi,
I love Front Row (upgraded to 1.01), it just has one flaw that makes it bad for movies. I have a 16:9 aspect Cinema Display, and whenever I want to watch 4:3 DivX movies, I want to stretch their aspect ratio to 16:9 so they fill the screen, but Front Row (so, Quicktime Player) doesn't offer this, or does it?
Other freeware players like VLC and Mplayer can do this, but they don't work with Front Row.
Is there a setting that will stretch the source material?

I'm exporting from FCE and I then use it in iDVD. My brain is fried, and I may have not been clear on the following: I export from FCE using File => use quicktime conversions.
Now when I export to straight-up Quicktime (not use quicktime filters), and then take that Quicktime file into iDVD it gives me a "Widescreen Preview" and when I take the next step and burn to DVD and play on a 4:3 aspect TV it comes out with the black bar on top and bottom (Which I believe is letterbox?)
So that being said, I'm at a loss as to why there are letterboxes in iDVD.
Thanks in advance.
Message was edited by: Skatingskis
I found something close. http://discussions.apple.com/thread.jspa?messageID=5924938&#5924938
It appears they are going from "Photo to Movie" straight into iDVD and having a similar issue. The big difference is that I'm using FCE before I go to iDVD.

Front row - black screen with audio

I recently installed Leopard on my old iBook.
When i start Front row, I can see the menus , trailer list, movie list etc., but when i play anything, the screen goes blank, i can see a progress bar moving(which auto-hides), and audio is also OK, but there is no video.the screen just goes blank and remains that way.
I have perian installed on my machine and all videos work OK in quicktime, VLC etc.
any possible solutions for this? has anyone else also faced this issue ?
thanks.

I can get a picture with Quicktime...but if I try to get enlarge the screen, the picture often becomes corrupted. I'm just rather annoyed that I spent $40 on this series and am having these issues. I only downloaded iTunes because there was no other option of getting this show. I've waited 24 years to see the entire "Liberty Stone" Mini-series (there was a problem with the tapes DIC released and they were missing eps)...so this just feels like a taunt.
I'm hoping this gets fixed quickly. It sounds like there is a lack of standardization with the DRM being used on these files.

Front Row gives me a white screen when activated

Hello
When I activate Front Row with my remote, the whole screen turns white. I can hear the sounds, and I can hear the interface working, but the screen is blank white.
How can I fix this?
---------------------S

i have had the same issue once in a long while. dont know the cause though. i just restart when it happens.

Using Front Row On Duel Screen

Hi guys,
I've got a macbook at the moment and was wondering, if i were to hook it up to another screen and run it duel screen is it possible to use front row in the second screen as appose to just the main laptop screen? And then also use the remote and everything to control front row, but at the same time be using my macbook normally for other tasks? So basically....i use my macbook normally, but at the same time, someone else can be using the remote to control Front Row thats showing on a different screen. Thanks in advance,
Luke

I assume when you are not using FrontRow, you can see your Mac desktop on both your laptop and the TV, correct? (Just making sure the connection is working.)
If so, in the Displays preference pane, there should be an Arrangement tab. This is where you tell your Mac how your have your displays arranged. There should be a check box that says Mirror Displays (or something like that). That tells the computer to show the same image on both displays.
Front Row can only be on one display. I assume it will always be on whichever display the computer has designated as the "primary" display. And it will blank any other displays while Front Row is active. If that is what is happening in your case, mirroring the displays should put Front Row on both.
BTW: The Mac's Help system can be, well, helpful here. From the Finder's Help Menu select Mac Help. Do a search for "mirror video" and you'll get instructions on how to do it.
Message was edited by: Bean

HT204400 Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen

Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help me

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Iphone 4s wont power on, im just getting a blank screen with battery charging on front screen

iphone 4s wont power on, im just getting a blank screen with battery charging on front screen>>>>becouse it is after damage water

At Apple Store, if you have AppleCare +, replacement iPhone 4S costs $50, if no +, then it will cost $199. Either your battery is faulty, the power management is faulty, or the charging port is faulty, or all three. Start with battery replacement. If still problem, then try charging port with flex cable replacement. If still problem, then it is very complex fix or no fix at all possible.

Is there any way to change the screen resolution in Front Row?

Hi all,
I've got a Mac Mini plugged in to my TV, and I want to be able to change the screen resolution depending on the content I'm watching (as some content is in 4:3 aspect ratio, some is in 16:9, and I'd prefer to have the picture filling the screen completely). Unfortunately, the TV doesn't have a "stretch" mode for making an 4:3 picture fit a 16:9 aspect ratio. If I know what I want to watch in advance, I can set the resolution accordingly using system prefs on the mac, but if I'm just sitting back choosing what to watch with the Apple Remote, it's annoying to have to leave front row, walk over to the computer and change resolution once I've decided what to watch, open system prefs, change resolution, re-launch Front Row and find what I wanted to watch again.
So I was wondering if anyone had figured a way to allow the screen resolution to be switched from within the FrontRow UI. I've seen that people have written python based plug-ins such as PyeTV and Understudy that allow different types of content to be added to FrontRow, but I've not found any utility plug-ins such as what I'm looking for on the net (nor could I find SDK documentation on this API in the stuff that comes with XCode).
I guess the other approach might be quick keys: has anyone had any success hooking up quick keys macros alongside front row in response to apple remote events? (seems too few events to be able to choose from, but I've never tried it, so I won't assume!) Or how about is there a way to trigger an AppleScript from within Front Row? And, of course, I'm very open to any other ideas you might have!
Thanks very much in advance for any ideas on this.
Andy
Message was edited by: Andy__D

Safe Boot from the HD, (holding Shift key down at bootup), set a good rez there.

Front Row - Lid Closed - Blank Videos (but with audio)

I hooked my computer up to my TV last night to watch some videos through front row (stupid quicktime and the pro lockout on full screen - talk about penny pinching from Apple!). Front row worked fine if I set it up so that the TV mirrored my laptop display. However, if I tried to run the laptop in lid closed mode with the TV as my main/only monitor everything would work except for the videos. They would be black while retaining the audio. For example, the little preview movies shown in the selection menu were black as was the movie when you played it.
Is this a known bug? Is there a fix? (Obviously I can run it more or less similarly with mirroring and my main screen dimmed as I did.)

i'm having the same issue. The video i tried was purchased from the iTunes music store. i see no preview of the video and no video is played on screen however audio is present. the same problem also occurs when trying to watch a movie trailer via movie trailer front row interface. All Front Row graphics are seen, only video is a problem. I can open and play back the video without problems in Quicktime Pro. (fullscreen)
The video output is 1280x720 sent to a samsung tv using a built in profile with overscan disabled.
Macbook (white) Mac OS X (10.4.6) 2.0Ghz Core Duo - 2GB RAM

Blank screen in front row

Similar Messages

Maybe you are looking for