Blank screen on Mac Mini running Boot Camp 3.1 with XP SP3

After upgrading from 3.0 to 3.1 of Boot Camp I now am getting a blank screen after Windows finishes it's loading screen.
Booting to safe mode works.
I have tried uninstalling 3.1 and reverting back to 3.0, but the issue remains. Reinstalling 3.1 again also gives the same error.
I uninstalled and reinstalled 2.1 (from a older system disk I had around) and the issue seems to be resolved however the refresh of items and windows on the screen are very slow.
I have isolated the issue to the NVidia drivers, however I am unable to find any besides the bootcamp ones that seem to work. I've read through the forums and people have mentioned downloading drivers for other models but not the Mac Mini.
So, two questions that would be very helpful in my quest to fix this:
1) Anyone know where to get the latest working Nvidia drivers for the new Mac Mini (besides bootcamp)
2) Anyone have a good utility or know of a good cleanup utility to get rid of all the previous nvidia drivers all over the place and in the registry? I read about a few, but it would be nice to know which ones actually work with bootcamp/xp, etc.
Thanks for any assistance on this!
- David

I fixed it. All I had to do was change the output to the Cirrus audio device instead of the ATI.

Similar Messages

  • Mac Mini 2011 boot camp freezes on loading windows screen.

    I bought my mac mini 2011 server, have upgraded it to mountan lion and mountain lion server and wanted to install windows on it. I have microsoft windows 7 professional OEM system builder edition on a dvd, a LG portable super multi blue rewriter, a corded mac keyboard with number pad, a HP mouse, and a hdmi monitor. I have not upgraded any features on the mac, it is original.
    I updated all software, well except a printer driver that I don't have the printer of anymore, and ran boot camp. I tried to partition my entire hard drive for it, however that did not work. I then tried to partition half of the first hard drive and that did not work either. I tried unpluging the mouse and keyboard and it still won't work. I bought the copy off of amazon and it appears to be legal. I just always get stuck on the "Windows is loading" screen. The loading bar, a white band across the bottom of the screen, always goes across the whole screen once fast, then makes it's way to the farther left side of the screen and then hangs there indefiniteley.
    Any suggestions? more questions about the situation?

    Mini mini, there are problems with mini and esp. server version.
    What I think others have said: cannot use OS X Server, had to use Mac OS X client
    External LG is not supported. Doesn't come with an internal SuperDrive though does it?
    The system builder is fine.
    Just one story (there are others, I need to collect all the "Mac Mini Tips" together, I can't remember and keep them straight otherwise.
    HDMI audio in Windows 7 64 bit 
    reinstalled the Intel video drivers and audio worked immediately.
    My config:  2011 Mac Mini 2.3, Intel 3000HD video
           .   .       upgrade to 8GB ram
    Samsung 8000 series LED TV connected with HDMI
    Memorex external BluRay writer(USB only power)
    After partitioning drive with boot camp and reboot, install Windows 7 with install wizard.
    When asked whether to allow automatic updates say 'no', then complete installation and run boot camp tools for Windows.
    Because the network driver gets installed prior to the Intel video driver, Windows will install the Windows Update Intel video driver which breaks HDMI audio.
    When auto updates are off, the Intel video driver that is correct gets installed last. 
    HDMI audio works with this driver.
    Apple should install the Intel video driver first and it would solve this problem.
    I now have full blown 3D BluRay support on the MacMini with TruHD audio, fantastic!
    https://discussions.apple.com/thread/3408749
    - There are other stories where Microsoft Windows will automatically install video drivers (iMac) and cause trouble. Sometimes in an innocuous security patches rolled out monthly Tuesday.

  • Mac Mini Server Boot Camp Windows 8.1 White Screen Issue

    Hello Apple Peeps!
    I have a Mac Mini Server 2012 which I have had for around 6 months. I use it quite a lot mainly for Music Production on the OS X side and Graphic Design on the Windows side.
    I recently decided to factory restore it as I wanted to spring clean it and reorganise the way some of my apps were installed. The way I had it set up was it was running OS X on one SSD and Windows 8.1 (installed using Boot Camp) on the other SSD. The way I went about the factory restore was I first used disk utility to erase/format the Windows SSD to Mac OS Extended (Journaled) and then went about the factory restore of OS X onto the other SSD as normal (following instructions from the Apple website).
    The issue I am having now is that my newly installed Windows 8.1 (used solely on a single SSD) is hanging on a white screen for quite a long time before the Windows splash screen shows up, where before when I would boot or restart into Windows there was no white screen and it would go straight into the Windows splash screen and load to the desktop very quickly.
    So my question is...
    Why do I get this prolonged white screen before the Windows 8.1 splash screen appears? How can I get rid of it? It was certainly not present on my previous installation. Can anyone advise me what the computer is doing during this time so that I can do some further research into a solution.
    What I have tried already....
    1) PRAM & SMC reset.
    2) Setting the startup disk to Boot Camp in both OS X and Windows 8.1.
    3) Reinstalling Windows 8.1 through Boot Camp.
    MAC MINI SERVER (LATE 2012), 2.6GHZ QUAD CORE I7, 16GB RAM, 2 x 256GB SSD, OS X 10.10.2, Windows 8.1 (Retail), Boot Camp Assistant (5.1.3), Covered By AppleCare.
    I would really appreciate some help with this ;-)

    I have right clicked on each SSD in Device Manager and selected the option 'Properties' from the drop down menu, which brings me to this window...
    I'm not sure where I can find Device Attributes, I have clicked on each of the tabs in the window above, as far as I can see none of them mention AHCI enabled or anything similar. Thanks for all of your responses by the way...much appreciated!

  • Blank screen, Intel Mac mini, Samsung P23700 LCD monitor; HELP!?!

    I just got a new 23" Samsung LCD monitor and hooked it up to an Intel Mac mini. Turning on the system results in a blank screen with the monitor simply displaying a dialog box that seems to show that it is trying to figure out if the incoming signal is digital or analog. This dialog box is on for a few seconds and then the monitor goes to sleep. The monitor realizes that there is a signal coming in; As soon as I disconnect the DVI cable I get the standard "Check Signal Cable" on the monitor's screen. I don't even get the initial white screen on the Mac boot up. nothing. just the monitor's confused signal identifying dialog.
    I've tried connecting the Mac mini to the monitor with a DVI to DVI cable and a DVI to VGA to DVI connection, with the same result.
    I've also tried the monitor with an older PowerPC based Mac mini with the same result.
    Both Macmini's work with out a problem when connected to my 32" LCD TV with a DVI to HDMI cable.
    I also tried the Samsung monitor with a little Windows XP running laptop using the VGA to DVI cable and the monitor worked like a charm; I think that fact has been the most painful part of the process up to now.
    The windows machine's screen set up that worked was 1280x800 at 40Hz. I can't get a resolution like that on the Mac's display settings. I've only been able to hook it up to the LCD TV, and the display settings when hooked up to the TV are limited to LCD TV settings; i.e. 1080i. I've also tried setting the mac mini to 800x600 but still get no picture.
    Resetting PRAM etc. didn't help either.
    I'm stuck... any ideas people?

    I've tried connecting the Mac mini to the monitor with a DVI to DVI cable...
    That should work.
    and a DVI to VGA to DVI connection...
    That won't work. Once you go from DVI to VGA from the mini, you need to stay VGA. There is no going back to digital. So try DVI to VGA and then a VGA cable to the Samsung.
    I also tried the Samsung monitor with a little Windows XP running laptop using the VGA to DVI cable and the monitor worked like a charm;...The windows machine's screen set up that worked was 1280x800 at 40Hz.
    I wouldn't call that working like a charm. 1280 x 800 at 40Hz is a completely bizarre resolution for a 23" monitor, or any monitor. I would begin wondering if you got a bad monitor if that's the best it can do.

  • While i was running boot camp to install windows 7 i had to cancel operation. Now my mac comes up black screen with a curser at top

    while i was running boot camp to install windows 7 i had to cancel operation. Now my mac comes up black screen with a curser at top

    First of all, start your Mac with the Alt key pressed until the boot manager apears. If your keyboard is wireless probably you should press the power button at the same time you start the Mac.
    After, go to Bootcamp Assistant and remove the windows partition and do all the process again.
    Remember to remove all the USB/Firewire/Thunderbolt devices that are attached to the Mac during the windows installation.
    Once windows boots for first time, install windows support software with all the drivers.
    IMPORTANT: If the windows partition doesn't boot correctly (Black screen with white blinking cursos at the left top corner) do this steps to boot windows:
    1- Start the Windows Installation DVD at system start.
    2- Click on Repair System, not install.
    3- Select Command Prompt
    4- Run these 3 commands: (Press enter for each command)
         Bootrec.exe /FixMbr
         Bootrec.exe /FixBoot
          Bootrec.exe /RebuildBcd
    5- Exit command line (type exit)
    6- Click on Restart button.
    7- Boot the Mac and you will see that It automaticaly loads windows
    Tell us how it goes!!
    PS: Sorry for my bad english!!!

  • Mac Mini Intel boots to blue screen and gets stuck

    Mac Mini running 10.6 Intel won't boot up. I get the chime, then the apple logo, then a blue screen, then nothing but the small rotating circle, which appears and disappears about every 5 seconds (not the color wheel, but the one that just looks like hands on a clock turning.)
    Per apple online help, tried starting up in Safe mode. Same result. No boot. Just blue.
    Per apple help, I started up in Sinlge User mode and ran Fsck from command line (I don't have the install disk). First run of Fsck said FILE SYSTEM WAS MODFIFED. Ran it again, per apple help. Second time, said volume appeared to be OK. Typed "reboot". Same result. No boot, just blue screen and rotating circle.
    Not sure what else to try. Any help?
    Thanks

    Sometimes PRAM seems to retain info from a previous startup disk error condition. There is a small chance that resetting the PRAM might help.
    You can get a replacement for your original OS X install DVD and any bundled apps from AppleCare (1-800-275-2273) for a shipping and handling fee. You will need to provide your Mac's serial number so they can send the correct DVD(s) for your specific model.

  • Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite

    Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite. I am trying to bring the old iMac screen up on the Yosemite system

    Hello! Not out of the box: OS X Mountain Lion: About screen sharing  You'll have to look for third-party options like Teamviewer

  • New mac book pro - to run boot camp or not?

    hi,
    im a brand new mac user and have had a brief browse of some problems that others have encountered with boot camp and possible crashes during partitioning...
    i'm not sure if anyone can help but i was wondering if it would be safest to run boot camp and partition my hard drive before i even use my new mbp? or to not run it at all - i will only be using windows to play the odd computer game, for everything else i will use my mbp as it was originally intended.
    what is the level of risk involved with boot camp? ...should i just run it before any data is saved onto the drive and hope for the best...?
    or fork out the cash for the mac versions of the each game (3 max)?
    i just don't want to screw it up, as my brother has had similar problems with his... and i've been saving for months!
    thanks for reading this far and thankyou for your help in advance!

    Boot Camp works beautifully if you follow directions. BC is merely an installer (and a good one). Windows works perfectly well on a Mac (better than some PCs). Windows is Windows - it has it's needs. If you are familiar with Windows no problem. Or - if you are willing to learn - no problem. There IS wisdom in installing BC right away. I found that if I install BC right after OS X, it is a good idea. As soon as I loaded the OSX updates there was potential trouble in that the updates were placed right in the spot where I needed my partition to go - requiring the Apple equivalent of a defrag. This happens rarely, but it does happen. Install OS X > Open BootCamp & Install > Partition for Windows > Update OS X - you'll be fine.

  • Can you run Boot Camp and Fusion at the same time?

    Hi,
    I had boot camp installed on my mac pro and loved it. I decided to get greedy and install Fusion using the boot camp partition. The Fusion install went ok but then Microsoft started to get fussy. Every time I would do something on Fusion it would ask me to "Re-activate Windows" when I logged into boot camp. Maybe if I saw Fusion fully working I wouldn't want to run boot camp any more but I think I want to have the option to run either. Right now I only have 1 gig real memory on my mac pro and Fusion seems a little slow compared to native boot camp. Can I run both boot camp and fusion without having to buy two native copies of Windows XP pro? I don't want a "sensible" answer, I want an answer that takes into account how Microsoft treats this re-activation situation.
    I guess Leopard might make this all obsolete, but until then .....
    ... Flash Gordon

    You need to make sure to install VMware Tools into your virtual machine (while booted into Windows via Fusion). Once you do this you shouldn't have to continually activate Windows when going back and forth from Boot Camp to Fusion. I've seen this discussed over on the VMware Fusion discussion boards, so you may want to look there for more details.
    Also, if Windows starts telling you it's been activated too many times, you can call Microsoft and they'll give you an alternate activation key. The phone number is listed on the Windows error screen. I had to do it and they were very accommodating. I just told them I was running Windows in a virtual machine, and there were almost no questions asked.
    You don't need to buy 2 copies of Windows to run both Boot Camp and VMFusion.

  • Screen flicker Mac Mini i5 2.3GHz 2011 ?

    Hi people,
    Does anybody else also experiences screen flicker on the Mac Mini i5 2.3GHz 2011 model, during startup from sleep-mode or a cold-boot in the morning?
    I posted a video on YouTube, to visualize the problem (otherwise hard to imagine, perhaps):
    http://www.youtube.com/watch?v=5sbAhjlfN_M
    Room temperature is about 15 degrees Celsius (Europe, wintertime) and the problem exposes itself when the machine is powered up after a nights sleep, or during a cold boot in the morning, the screen flashes from like the same in the YT movie, but then with the grey background and Apple-logo on it, continuing until the working desktop appears and then flashes some few more times, until "warmed-up".
    When the Mac has woke up during the day, room temperature about 23-25 degrees Celsius, the screen doesn't flicker at all, or at max. 1-2 times.
    The main screen (on the YT movie) is connected through Thunderbolt with an original Apple-brand mini-DisplayPort to DVI convertor and the secondary screen through a (with the Mac Mini facilitated) HDMI -> DVI convertor.
    The second screen always lags a little behind the main screen and the desktop appears when the main screen desktop has fully appeared, so no flickering on the second screen noticed, till so far.
    Setup:
    -Mac Mini i5 2.3GHz, model 2011 with a Kingston V+100 96GB SSD and 8GB Corsair RAM 1333MHz;
    -Main screen: Thunderbolt -> DVI, Dell 2005 FPW 20" IPS-panel @1680x1050;
    -Secondary screen: HDMI -> DVI, Dell 1704FPT 17" TN-panel @1280x1024.
    A SMC-reset and PRAM-reset didn't help, contacted Apple-support which recommended to download the generic Thunderbolt-patch DL1451, which I later recognized in my Software-update list in MacOS, as already download in October 2011, named/tagged: Thunderbolt 1.1
    The Mac is already running the latest firmware, EFI 1.4 (the machine is brand new, so expected no less then the latest to be honest.)
    Next step I'm going to try is: switch the screens on HDMI <-> Thunderbolt (didn't try that yet.)
    Never experienced this with my Mac Mini's 2009 before (had two of them, first the 2.0GHz and later the 2.26GHz- big Mac Mini fan overhere!), running the same setup (but then on Mini-DVI & Mini-DisplayPort.)
    It really feels like the internals of the Mac Mini 2011 have to warm-up, before fully functional...the Apple specs give me an operating temperature of 10-35 degrees, I'm not living in a cave, neither I accidentally forgot to turn off the air-conditioning system after the summer ended, so what the hack?
    Reminds at my childhood, the time we still used B/W television @my parents home with kathode/anode-tubes in it, they also needed some time to "warm-up" before presenting a stabile image ;-)

    Did you find a solution? I have the same hardware and same problem. I dont connect via thunderbolt, just the DVI-cable supplied by Apple to my TFT monitor. But without any hardware changes or updates it started a few days ago.

  • White Screen of Death at Startup - Boot Camp Based Problem

    I recently received my Intel-based 20" iMac yesterday and this morning I set it up and transfered all of my files from my old Windows XP computer successfully. I then played around with the iLife suite and a few other programs and decided I should probably run Boot Camp and set up Windows for a few Windows-based programs I need and some games that are Windows only.
    I started to look up Boot Camp on the Apple website, then realized iMacs that came with Leapord pre-installed should already have Boot Camp on them. I searched in Spotlight for "Boot camp" and found the "Boot Camp Assistant." I thought that was close enough, so I started the application up.
    First, it told me I needed to partition my hard drive and create a space for Windows. I figured I would have only a few esential programs on it, so I opted for a partion of about 10-12 GB if I remember correctly. The installer then told me to insert my Windows disc and I then put in my Windows XP SP1 installation CD. It read it, shutdown, then booted back up into what I recognized as the Windows setup screen.
    It went through the normal setup steps, until it got to a point where it asked what partition I should install Windows on. There was only one partition listed, so obviously I chose that one, but what was weird was the partition said it was over 100,000 MB, which is not the 10 GB I told it to partition. I got scared when it told me it would have to format the partition since it wasn't suitable for a Windows installation yet. I figured it wouldn't hurt to recheck the amount I partitioned, so I quit out of the Windows installer.
    Next, my Mac restarted and went to the infamous white screen of death.
    I have tried basically every single way to fix this.
    I tried:
    Alt - Option - PR (Reset the PRam) And waited for both 2, 3, 4, and 5 dings
    Alt
    Option
    Shift (Safe Mode)
    Put in the Mac OS X disc and booted up holding:
    D
    C
    None of these worked. Sorry if my key abbreviations are off, by the way, because I'm writing this on a Windows laptop and I haven't gotten the keys down for Macs yet.
    Does anyone have any suggestions? Apple call support is curretly closed, at least in my timezone. I'll probably try calling them tomorrow, but mostly I'm afraid of having to get a whole new harddrive and/or iMac. I haven't backed up my data anywhere yet (this is just my first day with the Mac) so if I lose the data, there goes upwards of a few thousand dollars in music and other data expenses.
    Thanks in advance for ideas, I'll try anything you throw at me now, as long it doesn't void the warranty or involve formatting my hard drive. (Though if you know a way to format my hard drive AND save my data, that would be even better)

    All the data that you transfered to the iMac should still be on the PC which originally contained the content. Transferring to the Mac is in reality only copying.
    A Boot Camp Windows installation requires Windows SP2 only;
    To use Boot Camp, you need:
    1. An Intel-based Macintosh computer with a built-in or USB keyboard and a built-in trackpad or USB mouse.
    2. Mac OS X 10.5 or later
    3. The latest firmware updates available for your Intel-based Mac.
    4. At least 10 GB of free space on your startup disk (single partition).
    5. A full, single-disc version of Windows Vista, Windows XP Home Edition or Professional with Service Pack 2 or later. Boot Camp does not include Windows. You must provide your own properly licensed installation disc.
    

Important: A Windows XP installation disc must include Service Pack 2 (SP2). You cannot install an earlier version of Windows and upgrade to Windows XP, nor install an earlier version of Windows XP and update it to SP2.

    6. Boot Camp Assistant (find it installed in /Applications/Utilities/ on Leopard).
    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
    The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
    Boot Camp: Installation and Storage

  • Created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion.

    I have created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion.  These accounts are for my kids and originally were setup with parental controls and time constraints.  Thinking this was the problem I removed the time constraints, removed the parental controls, deleted and re-added them, and made them standard users.  I have reinstalled, used disk utility to repair permissions, and made them admins.   Any help is appreciated.

    Users don't need Apple ID's. That's not the issue. Have you tried repairing permissions their accounts?
    http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
    Repairing User Permissions in OS X Lion
    You’ll need to reboot to perform this, and then use the same resetpassword utility that is used to change passwords in Lion, but instead choosing a hidden option.
    When you use the Disk Utility app and Repair Permissions — it doesn’t actually repair the permission settings on folders and files in your Home folder where your documents and personal applications reside.
    In Lion, there is an additional Repair Permissions application utility hidden away. This tool is located inside boot Repair Utilities. Here’s how to access it.
    Restart Lion and hold down the Command and R keys.    You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item then select Terminal.
    In the Terminal window, type resetpassword and hit Return.
    The Password reset utility launches, but you’re not going to reset the password. Instead, click on the icon for your Mac’s hard drive at the top. From the drop-down below it, select the user account where you are having issues.
    At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
    The reset process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac. Notice that ‘Spotlight’ starts re-indexing immediately.

  • Mac Mini running so slow

    Not sure how to diagnose issues on my Mac, but I gathered I should run Etre and post results here.  I know I could add more RAM, but this is so slow that I have to believe something else is going on.  Can someone spot anything unusual in the following?
    Problem description:
    Mac Mini running very slow
    EtreCheck version: 2.1.6 (109)
    Report generated January 24, 2015 11:33:17 AM EST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      Mac mini (Mid 2011) (Technical Specifications)
      Mac mini - model: Macmini5,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      2 GB RAM
      BANK 0/DIMM0
      1 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      1 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 288 MB
      VA2037 SERIES 1600 x 900 @ 60 Hz
    System Software: ℹ️
      OS X 10.8.5 (12F45) - Time since boot: 3 days 4:25:7
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      disk0s1 (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 499.25 GB (76.72 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Inc. iPhone
      Western Digital My Passport 0748 500.07 GB
      disk1s1 (disk1s1) <not mounted> : 210 MB
      My Passport (disk1s2) /Volumes/My Passport : 499.73 GB (67.99 GB free)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Incompatible Software/avast!.app
      [not loaded] com.avast.AvastFileShield (1.0.1) [Support]
      [not loaded] com.avast.PacketForwarder (1.3) [Support]
      /System/Library/Extensions
      [not loaded] com.cisco.nke.ipsec (2.0.1) [Support]
    Startup Items: ℹ️
      HP IO: Path: /Library/StartupItems/HP IO
      Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
      [failed] com.apple.accountsd.plist [Details]
      [failed] com.apple.coreservices.appleid.authentication.plist [Details]
      [failed] com.apple.lookupd.plist [Details]
      [failed] com.apple.pbs.plist [Details]
      [failed] com.apple.tccd.plist [Details]
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.wdhelper.plist [Details]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.divx.agent.postinstall.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] uk.co.markallan.clamxav.freshclam.plist [Support]
    User Login Items: ℹ️
      Microsoft Database Daemon Application  (/Applications/Microsoft Office 2008/Office/Microsoft Database Daemon.app)
      Dropbox Application  (/Applications/Dropbox.app)
      Google Drive Application  (/Applications/Google Drive.app)
      HP Scheduler Application  (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    Internet Plug-ins: ℹ️
      AmazonMP3DownloaderPlugin1017277: Version: Unknown
      OVSHelper: Version: 1.1 [Support]
      OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
      Flip4Mac WMV Plugin: Version: 2.3.1.2 [Support]
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 16.0.0.287 - SDK 10.6 [Support]
      DivXBrowserPlugin: Version: 2.2 [Support]
      Flash Player: Version: 16.0.0.287 - SDK 10.6 [Support]
      AmazonMP3DownloaderPlugin: Version: Unknown
      QuickTime Plugin: Version: 7.7.1
      iPhotoPhotocast: Version: 7.0
      HypercosmPlugIn: Version: 1.0 [Support]
      Scorch: Version: 6.2.0 [Support]
      JavaAppletPlugin: Version: 14.3.0 - SDK 10.8 Check version
    User internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 6.0 [Support]
      Picasa: Version: 1.0 - SDK 10.4 [Support]
      BrowserPlus_2.7.1: Version: 2.7.1 [Support]
    3rd Party Preference Panes: ℹ️
      BrowserPlus  [Support]
      DivX  [Support]
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
    Time Machine: ℹ️
      Mobile backups: OFF
      Auto backup: YES
      Destinations:
      My Passport [Local]
      Total size: 499.73 GB
      Total number of backups: 35
      Oldest backup: 2013-11-28 08:26:20 +0000
      Last backup: 2015-01-24 16:14:06 +0000
      Size of backup disk: Excellent
      Backup size 499.73 GB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          17% mds
          6% iPhoto
          3% activitymonitord
          2% WindowServer
          1% Activity Monitor
    Top Processes by Memory: ℹ️
      161 MB WebProcess
      132 MB iPhoto
      86 MB Safari
      82 MB App Store
      62 MB iTunes
    Virtual Memory Information: ℹ️
      33 MB Free RAM
      674 MB Active RAM
      668 MB Inactive RAM
      769 MB Wired RAM
      12.57 GB Page-ins
      12.61 GB Page-outs

    Only 2 GB is your man problem. You Mac can accept 16 GB. If tight for money get one 8 GB stick and replace one of yuor 1 GB sticks with the 8 GB stick
    http://eshop.macsales.com/shop/memory/Apple_Mac_mini/DDR3_1333
      12.57 GB Page-ins
    Uninstall your antivirus
      [invalid?] uk.co.markallan.clamxav.freshclam.plist [Support]
    and this one too. Have two is very bad
      /Incompatible Software/avast!.app
      [not loaded] com.avast.AvastFileShield (1.0.1) [Support]
      [not loaded] com.avast.PacketForwarder (1.3) [Support]
    Update this
      HP IO: Path: /Library/StartupItems/HP IO
      Startup items are obsolete in OS X Yosemite

  • Mac mini running very slow after downloading yosemite

    Why is my mac mini (mid 2011) 2.5GHz Intel Core i5 now running very slow in all aspects after upgrading to OS X yosemite 10.10.1?
    Here is a recent EtreCheck Report
    Problem description:
    Mac mini running very slow after upgrading to yosemite
    EtreCheck version: 2.1.6 (109)
    Report generated January 21, 2015 at 2:56:48 PM PST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      Mac mini (Mid 2011) (Technical Specifications)
      Mac mini - model: Macmini5,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      AMD Radeon HD 6630M - VRAM: 256 MB
      Cinema HD 1920 x 1200
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Time since boot: 15 days 18:52:31
    Disk Information: ℹ️
      Hitachi HTS545050B9A302 disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 499.25 GB (235.76 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Computer, Inc. Apple Cinema HD Display
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple, Inc. Keyboard Hub
      Apple Inc. Apple Keyboard
      Primax Electronics Apple Optical USB Mouse
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
      [killed] com.apple.CallHistoryPluginHelper.plist
      [killed] com.apple.CallHistorySyncHelper.plist
      [killed] com.apple.cloudd.plist
      [killed] com.apple.cmfsyncagent.plist
      [killed] com.apple.coreservices.appleid.authentication.plist
      [killed] com.apple.EscrowSecurityAlert.plist
      [killed] com.apple.icloud.fmfd.plist
      [killed] com.apple.Maps.pushdaemon.plist
      [killed] com.apple.nsurlsessiond.plist
      [killed] com.apple.printtool.agent.plist
      [killed] com.apple.rcd.plist
      [killed] com.apple.sbd.plist
      [killed] com.apple.telephonyutilities.callservicesd.plist
      [killed] com.apple.warmd_agent.plist
      [killed] com.apple.xpc.loginitemregisterd.plist
      15 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
      [killed] com.apple.AssetCacheLocatorService.plist
      [killed] com.apple.awdd.plist
      [killed] com.apple.ctkd.plist
      [killed] com.apple.emond.aslmanager.plist
      [killed] com.apple.icloud.findmydeviced.plist
      [killed] com.apple.ifdreader.plist
      [killed] com.apple.installd.plist
      [killed] com.apple.nehelper.plist
      [killed] com.apple.nsurlsessiond.plist
      [killed] com.apple.periodic-daily.plist
      [killed] com.apple.periodic-monthly.plist
      [killed] com.apple.periodic-weekly.plist
      [killed] com.apple.softwareupdate_download_service.plist
      [killed] com.apple.tccd.system.plist
      [killed] com.apple.wdhelper.plist
      [killed] com.apple.xpc.smd.plist
      16 processes killed due to memory pressure
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [running] com.spotify.webhelper.plist [Support]
    User Login Items: ℹ️
      iTunesHelper UNKNOWN  (missing value)
      AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      CDSBupd Application  (/Applications/ConceptDraw Office 2/Solution Browser.app/Contents/MacOS/CDSBupd.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Support]
      FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 [Support]
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      GoPro  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          27% mds
          12% WindowServer
          1% discoveryd
          1% Microsoft Word
          1% Mail
    Top Processes by Memory: ℹ️
      253 MB discoveryd
      64 MB Mail
      52 MB Safari
      43 MB iTunes
      43 MB Preview
    Virtual Memory Information: ℹ️
      42 MB Free RAM
      768 MB Active RAM
      744 MB Inactive RAM
      993 MB Wired RAM
      104.37 GB Page-ins
      4.15 GB Page-outs

    More memory will help:
      4.15 GB Page-outs
      16 processes killed due to memory pressure
      15 processes killed due to memory pressure

  • Small Business w/Mac Mini Running Server OSX, Connect From Home Solution - VPN?

    I am trying to setup my Mac Mini running OS X Server (Mountain Lion) to be accessed from users at home (for file sharing and Contact Services). Is a VPN the best solution? (Small business setup - privacy/security a concern).
    Hi everyone, and Thanks for the help in advance!
    I am currently setting up a network for my company (small business) and have a few questions. We have a Mac Mini (mid-2012) running Server OS X Mountain Lion, and 5 MBP's (our work computers- all running latest version of Mountain Lion).
    To summarize:
    My goal = Setup a secure way of connecting the MBP's to the server when our personnel are at home (for file sharing).
    I am switching all of the users from local to network (we didn't need the network functionality when we first setup the server, and we are now expanding our use of it). This is going to occur this weekend, as downtime for the server is needed to make the changes.
    After I establish the Open Directory and all of that, I will be setting up Contact Services (to share a master list of contacts with the members of our department) and we already have some Calendar sharing setup.
    The purpose of this is to enable our employees the option of working necessary overtime from home so they can be with their families instead of in the office all the time. It is a noble cause and I want to set this up the best that I can for them.
    This being said... I'm no Mac Genius, and this stuff can get very confusing very fast. I have read a little about VPN's, and am wondering if this is the solution to my problem. We need to establish a SECURE way of connecting to the server from remote locations, enabling us to pull needed files from the server.
    If anybody can offer some advice on this I would really appreciate it. I love Apple products and I have faith that this is as easy as I've been told it is.
    Thank you very much for your time and consideration!

    No, it wasn't difficult at all to setup in OS X Server. I use a free internet domain name from DynDNS.com. I don't know if they still offer free ones anymore. You can not use VPN and 'Back to My Mac' at the same time as they use some or all of the same ports.
    I'm at work and not on my Mac at the moment so this is from memory.
    Within OS X Server, I enabled the VPN Service (default L2TP) and used my free domain name in the VPN Host Name and a Secret passphrase. This put an entry in my Airport Extreme router for VPN (port mapping).
    Within the client Mac, I added a VPN network connnection (System Preferences /Network). I pointed to my free domain name in the Server Address, used my Server account name in the account name. I think there's an Authentication button that I clicked. I entered my Server account password, the Secret passphrase in the Secret field, checked a box to show VPN icon in Menu Bar and exited out of that. Then clicked the Advanced button and checked the box to send all traffic over VPN connection.
    I had VPN authentication issues at first when trying to connect to test out the connection. I just kept trying as I knew I had all the settings correct and it would finally connect after about 3-4 tries. After that, I sometimes have to connect more than once to actually connect to my Server via VPN. But it does work nice. I brought my MBP into work once to test it out and was able to connect to my home Server via VPN and use Screen Sharing and had access to all my shared folders.

Maybe you are looking for