Blank Screen on my nano ipod!!???!!

HELP!!! My ipod is about 3 weeks old, it has been working fine but it went dead and now the screen is blank even when it is connected to my computer. Any helpfull suggestions???

Get a flashlight and look into the headphone jack or the docking connection. There are moisture sensors in each location, they will be pink or red if they have been exposed to moisture. Remember that moisture includes steam, condensation, sweat, etc.

Similar Messages

  • My ipod nano has blank screen

    my ipod nano has just got a blank backlit screen and wont do nothing else?

    tk from sligo wrote:
    Same thing has happened me. ipod nano 6th gen blank screen shows in itunes tried resetting - What is going on?
    See my response in the following thread: 
    https://discussions.apple.com/thread/3154887?tstart=0 

  • My ipod nano 6th gen. is showing a blank screen

    My ipod nano 6th gen. is showing a blank screen and nthing happens while pressing volume down button and on or off button HELP PLEASE.........

    Same issue. Have tried connecting it iTunes to see if it's recognising it for restore?

  • My ipod nano 5th gen has blank screen

    Hi, my ipod nano 5th gen has a blank screen, will not switch on, and not recognised by computer. Have tried holding menu and central button but still dead. Any suggestions please.

    Hello Emilyyandrews,
    To fix try this:
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    This has the best chance of fixing your issue if its not hardware related. If it does not fix it then you may want to consider setting the ipod up for service:
    https://selfsolve.apple.com/GetWarranty.do
    Or you can call Apple and have them set it up for you. Have your serial number ready.
    1800 MY APPLE
    Hope this helps.
    ~Julian

  • IPod nano 4gb boots up to blank screen

    ok this one is really weird. first of all you must know that i can't turn on my ipod on normally any more. i have to reset it instead of just pressing any button. but that's not the main problem. when i turn it on that way, there's no logo shown and then this whitely-glowing blank screen appears. it's just blank. and the funny thing is that i can still listen to the music. basicly nano works normally except for the screen- there's just nothin' on it.
    i've tried restoring it and all that, but the screen is still blank. it's an ipod nano 1st gen, software 1.2, itunes 7.0.1.8
    oh there's another funny thing. when i tried to restore it i tunes didn't ask if which version they should restore my ipod to.
    any ideas?

    Welcome to Apple Discussions!
    Try the steps listed here...
    http://docs.info.apple.com/article.html?artnum=303545
    Is your iPod recognized by iTunes? What happens when you try and restore it? Does the restore process not begin? Or does it complete and the iPod still shows that screen? Does iTunes say it is done restoring?
    btabz

  • My ipod nano has a blank screen

    my ipod nano has blank screen and will not show anything. I`ve tried to restore it but when i plug it into my computer it says that i didn`t plug it in. I`ve tried to call apple and ask what was going on, but every time i call it either get`s me a machine or it`ll keep ringing and ringing. I`ve tried to write, but no one has wrote me back. I had my ipod nano since November 17, 2005 and I still haven`t used it, can anyone help? I also tried to take it to electronic stores, but their services to help cost more than what I paid for my ipod, Please help!!
    Thank u

    You could try the 5r's, and disk mode.
    Or you could call Apple 1-800-275-2273, I think there hours are 9-9 EST Mon_fri.
    If you've had it a year I would call them and tell them it's not working and get the Apple Care.

  • Ipod nano 7th generation has a blank screen

    My ipod quit working in the middle of a song. I attached it to my PC and it still has a blank screen and I do not see ipod button on the itunes page. Tried holding down on/off button with home button. Help!!!

    contact apple and see if they can replace it.

  • My ipod nano is showing a blank screen

    hi
    i have a big prob.my ipod is showing a blank screen.i tried a lot to turn it on but its not working. when i put it into charge still its not displaying anything. please anyone help me out.

    try moving the hold thingy back and forth; then press the menu and center buttons for about 6 secs

  • How do I get an iPod touch to turn on other than the normal way. It has been dropped and all I can get is a blank screen. Have tried holding the HOME button down for 30 sec. but that didn't work.

    How does one get an iPod nano to turn on other than the "normal" way? This one has been dropped and all I can get is a blank screen. I have tried holding down the HOME button to restart it but no go. When I connect it to my computer, I am told to enter the PASSCODE which I cannot do as there is no touchpad.

    David ..
    Your topic refers to an iPod touch
    Then you say:  How does one get an iPod nano to turn on ......
    If it's an iPod touch, try a reset.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, whether it's an iPod nano or touch, it probably needs service >  Apple - Support - Service Answer Center

  • Ipod turned off mid song - blank screen and wont restart

    I have a 3rd generation ipod nano - used quite regularly but it has not sustained any known damages (not been in contact with water - not been dropped). I updated my ipod today - bought 9 songs and they synced in no problems. I was listening to the ipod in a doc for about an hour and then during one song the ipod suddenly cut out mid song and I cannot get it going again since.
    The ipod has a fully blank screen - totally black.
    I have gone through the steps via ipod - pressing inner circle and menue keys at same time. I have connected the ipod to the computer. I have re-started my computer - nothing...still blank black screen.
    I tried contacting tech support via apple but it won't recognise my serial number! Its an authentic ipod - bought in an electronic shop.
    The serial number is on both the origonal packaging and the ipod - but is not recognised by apple.
    I am so upset - don't know where to go from here! I have years worth of music on this ipod which I am very worried about losing..and cannot really afford to dish out for a new nano right now.
    Any suggestions for me?
    Janesays...

    Have you seen these articles?
    iPod won't turn on
    iPod stops responding or won't wake from sleep
    -Kylene

  • Nano's frozen, blank screen comes on

    My ipod nano wants to turn on but doesn't, the screen will light up and be blank. I tried holding the middle button and menu = nothing. I can see everything when it's connected to the computer. Anyone know any secrets to this problemo?

    I now found out my son dropped the nano into a puddle, so it got wet. Tried to let it dry for about 2 weekes now and the ipod itself actually works, you just have to guess where the songs are as the screen lights up but is still blank, no anything but a blank screen. Any ideas on this type of situation?

  • HT1212 My daughter's iPod touch is stuck on a blank screen with the loading circle just going around and around. I tried to restore it, but it says I have to enter the passcode. I have the passcode, but as I said, there's nothing on the screen. How do I f

    My daughter's iPod Touch is stuck on a blank screen with that loading circle thing just going around and around. She said she was trying to duplicate an app or something, and all the the apps started shaking like when you delete them. I turned the iPod off, but it never turned back on completely. I tried to restore it, but it's saying that I have to enter the passcode. But, as I said, there's nothing on the sceen excect the circle thing. Please help!!!!!

    Start at # 3
    1-  iOS: Not responding or does not turn on
    2  Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    3 If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    4  Try on another computer                            
    5  If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • I reformatted my ipod to windows and now I get a blank screen. Help!

    My brother gave me his old Ipod 30Gb, I believe it's an IPOD Classic. When I first connected it to my PC I got a message that it needed to get reformatted to Windows, so I did that. After that when the IPOD came back on it had a blank screen. I tried holding down the menu + center button also but that did not work.
    I also tried running the diagnostics on iTunes and failed on the Device Sync Test. I can see the music on the IPOD but they are greyed out and  it won't play. But if I attach the earbuds I can hear the songs, but again the screen is blank.
    Thank you for any assistance you can give.

    Difficult to comprehend your post.
    " I can see the music on the IPOD but they are greyed out and  it won't play. But if I attach the earbuds I can hear the songs, but again the screen is blank"
    Especially these parts
    that you can see the music but the screen is blank?
    it wont play but you can hear the songs.
    Just a wild guess, your battery is low, connect it to the PC for 4 hours, then Reset the iPod. (Menu+center button
    till the Apple logo comes ON)
    Tenga un buen día

  • My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

    My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

    Read the PDF user manual for a possible solution:  iPod Manuals and/or iPod Nano Support 
    Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. 
    If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.

  • While updating Ipod we now have a blank screen and when connecting to itunes the ipod is not showing under devices

    While updating ipod touch we now have a blank screen. I have updated itunes but am unable to sync because the ipod does not show under devices. I have tried shuttng down and restarting but only have a blank screen or ap0ple logo. Sometimes the screen shows connect to itunes but that has been it.

    I have the same problem, after upgrading my itouch to iOS6, it doesNOT respond to anything, apple logo stays on the screen all the time and does NOTHING! restore does not work either.... i hope we can get an answer from someone soon... apple support did not have an asnwer.

Maybe you are looking for

  • Adobe Premiere Pro CS6 has stopped working when importing music (Windows 8)

    I have a problem with Adobe premiere Pro CS6  on windows 8. When I use Premiere Pro CS6 for the first time, it's doesn't have any problem, but now I can't import music to Premiere Pro CS6 and it's say ''Adobe Premiere Pro CS6 has stopped working'', I

  • 3D Plot blinking

    Hello, I'm trying to make a 3D Graph, using CWGraph3D, CWPlots3D, CWPlot3D. This can be seen in the image below. Outside of the image, several more Plots are added, in similar fashion as shown. I use 'RemoveAll' to reset the image, otherwise the grap

  • Time Machine Copying all files again after a restore

    i recently achieved a successful restore of my computer and now i am wishing to back up my computer again (after installing bootcamp) but time machine keeps trying to backup all my files my computers name is still the same and when i force a backup t

  • Airport express wont hold

    Airport express won't hold the change to extend a network. I have restarted many times and still flashes amber. Please assist. thanks

  • Download Button goes to v5.4

    OS: Windows 7 SP1 64bit LR: 5.4 (non-CC) Scenario: When I open Lightroom 5.4, it prompts me to download 5.5.  I click on the "Download..." button and my Chrome opens the webpage to download version 5.4, not 5.5.  I've reset my default browser to Inte