Blank screen, unable to quit
When i run startx, it goes to a blank screen, but if i hit enter a lot, it brings up some blue and yellow lines. I am unable to quit X. This is my log.
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux scorpina 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 22 May 2008 06:09:07PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 20 01:22:31 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5a33 card 107b,6047 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1002,5a3f card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:11:0: chip 1002,437a card 107b,6047 rev 80 class 01,01,8f hdr 00
(II) PCI: 00:12:0: chip 1002,4379 card 107b,6047 rev 80 class 01,01,8f hdr 00
(II) PCI: 00:13:0: chip 1002,4374 card 107b,6047 rev 80 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4375 card 107b,6047 rev 80 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4373 card 107b,6047 rev 80 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4372 card 107b,6047 rev 81 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,4376 card 107b,6047 rev 80 class 01,01,8a hdr 00
(II) PCI: 00:14:2: chip 1002,437b card 107b,6047 rev 01 class 04,03,00 hdr 00
(II) PCI: 00:14:3: chip 1002,4377 card 107b,6047 rev 80 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 80 class 06,04,01 hdr 81
(II) PCI: 01:05:0: chip 1002,5a61 card 107b,6047 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:02:0: chip 10ec,8139 card 107b,6047 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 14f1,2f20 card 14f1,2000 rev 00 class 07,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00002000 - 0x00002fff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0x40100000 - 0x401fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x20000000 - 0x3fffffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:20:4), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[1] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[2] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[3] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x40000000 - 0x400fffff (0x100000) MX[b]
(--) PCI:*(1:5:0) ATI Technologies Inc RC410 [Radeon Xpress 200] rev 0, Mem @ 0x20000000/28, 0x40100000/16, I/O @ 0x2000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0x40000000 - 0x4000ffff (0x10000) MX[b]
[1] -1 0 0x40010000 - 0x400100ff (0x100) MX[b]
[2] -1 0 0x40200000 - 0x40203fff (0x4000) MX[b]
[3] -1 0 0x40207000 - 0x402073ff (0x400) MX[b]
[4] -1 0 0x40206000 - 0x40206fff (0x1000) MX[b]
[5] -1 0 0x40205000 - 0x40205fff (0x1000) MX[b]
[6] -1 0 0x40204000 - 0x40204fff (0x1000) MX[b]
[7] -1 0 0x40207400 - 0x402075ff (0x200) MX[b]
[8] -1 0 0x40207600 - 0x402077ff (0x200) MX[b]
[9] -1 0 0x40100000 - 0x4010ffff (0x10000) MX[b](B)
[10] -1 0 0x20000000 - 0x2fffffff (0x10000000) MX[b](B)
[11] -1 0 0x00001100 - 0x00001107 (0x8) IX[b]
[12] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[13] -1 0 0x00003000 - 0x0000300f (0x10) IX[b]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[18] -1 0 0x00003010 - 0x0000301f (0x10) IX[b]
[19] -1 0 0x00003020 - 0x0000302f (0x10) IX[b]
[20] -1 0 0x00003078 - 0x0000307b (0x4) IX[b]
[21] -1 0 0x00003050 - 0x00003057 (0x8) IX[b]
[22] -1 0 0x0000307c - 0x0000307f (0x4) IX[b]
[23] -1 0 0x00003058 - 0x0000305f (0x8) IX[b]
[24] -1 0 0x00003030 - 0x0000303f (0x10) IX[b]
[25] -1 0 0x00003080 - 0x00003083 (0x4) IX[b]
[26] -1 0 0x00003060 - 0x00003067 (0x8) IX[b]
[27] -1 0 0x00003084 - 0x00003087 (0x4) IX[b]
[28] -1 0 0x00003068 - 0x0000306f (0x8) IX[b]
[29] -1 0 0x00002000 - 0x000020ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x40000000 - 0x4000ffff (0x10000) MX[b]
[1] -1 0 0x40010000 - 0x400100ff (0x100) MX[b]
[2] -1 0 0x40200000 - 0x40203fff (0x4000) MX[b]
[3] -1 0 0x40207000 - 0x402073ff (0x400) MX[b]
[4] -1 0 0x40206000 - 0x40206fff (0x1000) MX[b]
[5] -1 0 0x40205000 - 0x40205fff (0x1000) MX[b]
[6] -1 0 0x40204000 - 0x40204fff (0x1000) MX[b]
[7] -1 0 0x40207400 - 0x402075ff (0x200) MX[b]
[8] -1 0 0x40207600 - 0x402077ff (0x200) MX[b]
[9] -1 0 0x40100000 - 0x4010ffff (0x10000) MX[b](B)
[10] -1 0 0x20000000 - 0x2fffffff (0x10000000) MX[b](B)
[11] -1 0 0x00001100 - 0x00001107 (0x8) IX[b]
[12] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[13] -1 0 0x00003000 - 0x0000300f (0x10) IX[b]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[18] -1 0 0x00003010 - 0x0000301f (0x10) IX[b]
[19] -1 0 0x00003020 - 0x0000302f (0x10) IX[b]
[20] -1 0 0x00003078 - 0x0000307b (0x4) IX[b]
[21] -1 0 0x00003050 - 0x00003057 (0x8) IX[b]
[22] -1 0 0x0000307c - 0x0000307f (0x4) IX[b]
[23] -1 0 0x00003058 - 0x0000305f (0x8) IX[b]
[24] -1 0 0x00003030 - 0x0000303f (0x10) IX[b]
[25] -1 0 0x00003080 - 0x00003083 (0x4) IX[b]
[26] -1 0 0x00003060 - 0x00003067 (0x8) IX[b]
[27] -1 0 0x00003084 - 0x00003087 (0x4) IX[b]
[28] -1 0 0x00003068 - 0x0000306f (0x8) IX[b]
[29] -1 0 0x00002000 - 0x000020ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x40000000 - 0x4000ffff (0x10000) MX[b]
[5] -1 0 0x40010000 - 0x400100ff (0x100) MX[b]
[6] -1 0 0x40200000 - 0x40203fff (0x4000) MX[b]
[7] -1 0 0x40207000 - 0x402073ff (0x400) MX[b]
[8] -1 0 0x40206000 - 0x40206fff (0x1000) MX[b]
[9] -1 0 0x40205000 - 0x40205fff (0x1000) MX[b]
[10] -1 0 0x40204000 - 0x40204fff (0x1000) MX[b]
[11] -1 0 0x40207400 - 0x402075ff (0x200) MX[b]
[12] -1 0 0x40207600 - 0x402077ff (0x200) MX[b]
[13] -1 0 0x40100000 - 0x4010ffff (0x10000) MX[b](B)
[14] -1 0 0x20000000 - 0x2fffffff (0x10000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x00001100 - 0x00001107 (0x8) IX[b]
[18] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[19] -1 0 0x00003000 - 0x0000300f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x00003010 - 0x0000301f (0x10) IX[b]
[25] -1 0 0x00003020 - 0x0000302f (0x10) IX[b]
[26] -1 0 0x00003078 - 0x0000307b (0x4) IX[b]
[27] -1 0 0x00003050 - 0x00003057 (0x8) IX[b]
[28] -1 0 0x0000307c - 0x0000307f (0x4) IX[b]
[29] -1 0 0x00003058 - 0x0000305f (0x8) IX[b]
[30] -1 0 0x00003030 - 0x0000303f (0x10) IX[b]
[31] -1 0 0x00003080 - 0x00003083 (0x4) IX[b]
[32] -1 0 0x00003060 - 0x00003067 (0x8) IX[b]
[33] -1 0 0x00003084 - 0x00003087 (0x4) IX[b]
[34] -1 0 0x00003068 - 0x0000306f (0x8) IX[b]
[35] -1 0 0x00002000 - 0x000020ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.49.7
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:05:0
(II) ATI Proprietary Linux Driver Version Identifier:8.49.7
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.493.1
(II) ATI Proprietary Linux Driver Build Date: May 12 2008 11:03:20
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x5A61) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x40000000 - 0x4000ffff (0x10000) MX[b]
[5] -1 0 0x40010000 - 0x400100ff (0x100) MX[b]
[6] -1 0 0x40200000 - 0x40203fff (0x4000) MX[b]
[7] -1 0 0x40207000 - 0x402073ff (0x400) MX[b]
[8] -1 0 0x40206000 - 0x40206fff (0x1000) MX[b]
[9] -1 0 0x40205000 - 0x40205fff (0x1000) MX[b]
[10] -1 0 0x40204000 - 0x40204fff (0x1000) MX[b]
[11] -1 0 0x40207400 - 0x402075ff (0x200) MX[b]
[12] -1 0 0x40207600 - 0x402077ff (0x200) MX[b]
[13] -1 0 0x40100000 - 0x4010ffff (0x10000) MX[b](B)
[14] -1 0 0x20000000 - 0x2fffffff (0x10000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x00001100 - 0x00001107 (0x8) IX[b]
[18] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[19] -1 0 0x00003000 - 0x0000300f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x00003010 - 0x0000301f (0x10) IX[b]
[25] -1 0 0x00003020 - 0x0000302f (0x10) IX[b]
[26] -1 0 0x00003078 - 0x0000307b (0x4) IX[b]
[27] -1 0 0x00003050 - 0x00003057 (0x8) IX[b]
[28] -1 0 0x0000307c - 0x0000307f (0x4) IX[b]
[29] -1 0 0x00003058 - 0x0000305f (0x8) IX[b]
[30] -1 0 0x00003030 - 0x0000303f (0x10) IX[b]
[31] -1 0 0x00003080 - 0x00003083 (0x4) IX[b]
[32] -1 0 0x00003060 - 0x00003067 (0x8) IX[b]
[33] -1 0 0x00003084 - 0x00003087 (0x4) IX[b]
[34] -1 0 0x00003068 - 0x0000306f (0x8) IX[b]
[35] -1 0 0x00002000 - 0x000020ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x8651778
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x40000000 - 0x4000ffff (0x10000) MX[b]
[5] -1 0 0x40010000 - 0x400100ff (0x100) MX[b]
[6] -1 0 0x40200000 - 0x40203fff (0x4000) MX[b]
[7] -1 0 0x40207000 - 0x402073ff (0x400) MX[b]
[8] -1 0 0x40206000 - 0x40206fff (0x1000) MX[b]
[9] -1 0 0x40205000 - 0x40205fff (0x1000) MX[b]
[10] -1 0 0x40204000 - 0x40204fff (0x1000) MX[b]
[11] -1 0 0x40207400 - 0x402075ff (0x200) MX[b]
[12] -1 0 0x40207600 - 0x402077ff (0x200) MX[b]
[13] -1 0 0x40100000 - 0x4010ffff (0x10000) MX[b](B)
[14] -1 0 0x20000000 - 0x2fffffff (0x10000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x00001100 - 0x00001107 (0x8) IX[b]
[21] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[22] -1 0 0x00003000 - 0x0000300f (0x10) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[27] -1 0 0x00003010 - 0x0000301f (0x10) IX[b]
[28] -1 0 0x00003020 - 0x0000302f (0x10) IX[b]
[29] -1 0 0x00003078 - 0x0000307b (0x4) IX[b]
[30] -1 0 0x00003050 - 0x00003057 (0x8) IX[b]
[31] -1 0 0x0000307c - 0x0000307f (0x4) IX[b]
[32] -1 0 0x00003058 - 0x0000305f (0x8) IX[b]
[33] -1 0 0x00003030 - 0x0000303f (0x10) IX[b]
[34] -1 0 0x00003080 - 0x00003083 (0x4) IX[b]
[35] -1 0 0x00003060 - 0x00003067 (0x8) IX[b]
[36] -1 0 0x00003084 - 0x00003087 (0x4) IX[b]
[37] -1 0 0x00003068 - 0x0000306f (0x8) IX[b]
[38] -1 0 0x00002000 - 0x000020ff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 5 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI Radeon Xpress Series" (Chipset = 0x5a61)
(--) fglrx(0): (PciSubVendor = 0x107b, PciSubDevice = 0x6047)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0x20000000
(--) fglrx(0): MMIO registers at 0x40100000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI RADEON XPRESS 200 Series
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: MS4
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:5:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:1:5:0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.49.7
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Using adapter: 1:5.0.
(II) fglrx(0): [FB] Find the MC FB aperturs range(MCFBBase = 0x18000000, MCFBSize = 0x8000000)
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: MAG Model: 3da Serial#: 136672
(II) fglrx(0): Year: 2001 Week: 51
(II) fglrx(0): EDID Version: 1.1
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 37 vert.: 27
(II) fglrx(0): Gamma: 1.27
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605
(II) fglrx(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 640 vsize 480 refresh: 100 vid: 26673
(II) fglrx(0): #2: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #3: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) fglrx(0): #4: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 40.5 MHz Image Size: 54 x 230 mm
(II) fglrx(0): h_active: 640 h_sync: 656 h_sync_end 720 h_blank_end 800 h_border: 0
(II) fglrx(0): v_active: 480 v_sync: 481 v_sync_end 484 v_blanking: 506 v_border: 0
(II) fglrx(0): Monitor name: 986FS
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 86 kHz, PixClock max 150 MHz
(II) fglrx(0): fxha1c136672u
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff003427da03e0150200
(II) fglrx(0): 330b010108251b1be85c119e59479b27
(II) fglrx(0): 10484fa10b0031593168455945686159
(II) fglrx(0): a94000000000d20f80a020e01a101040
(II) fglrx(0): 130036e600000000000000fc00393836
(II) fglrx(0): 465300000ec81000001e000000fd0032
(II) fglrx(0): a01e560f000a202020202020000000fe
(II) fglrx(0): 0066786861316331333636373275008e
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 301/133MHz @ 50Hz [enable load balancing]
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
Backtrace:
0: /usr/bin/X(xf86SigHandler+0x7e) [0x80e39de]
1: [0xb7f28400]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so [0xb7961f55]
3: /usr/lib/xorg/modules/drivers//fglrx_drv.so(DALCWDDE+0x1a2) [0xb7960512]
4: /usr/lib/xorg/modules/drivers//fglrx_drv.so(swlDalHelperAddCustomizeMode+0x1f7) [0xb78a5a97]
5: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxPreInit+0xce1) [0xb7879171]
6: /usr/bin/X(InitOutput+0x9cf) [0x80a9bcf]
7: /usr/bin/X(main+0x2b1) [0x8073d01]
8: /lib/libc.so.6(__libc_start_main+0xe5) [0xb7d005c5]
9: /usr/bin/X(FontFileCompleteXLFD+0x211) [0x80731f1]
Fatal server error:
Caught signal 4. Server aborting
Last edited by sdubois92 (2008-06-20 02:44:59)
The secret to fixing xorg.conf problems is searching for
(EE)
in your xorg log. Once you find those, you're more than half way to fixing the errors! There are 2 sets of errors in your log:
(EE) Failed to load module "type1" (module does not exist, 0)
and
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
This wiki page should be helpful with both errors: http://wiki.archlinux.org/index.php/Xorg.
Similar Messages
-
Crisis!!! sleep/wake button broken, blank screen, unable to restart... HELP!!
my sleep/wake button is not functioning and i just had a black screen. My friends are able to call me and they tell me it rings but i just get a blank screen. i really dont know how to restart and beg someone to help me. Thank you... (iPhone 5)
If there is a broken button there is nothing you can do. Take the phone to an Apple store and they will replace it, as all 5's are still in warranty. Make a genius bar reservation first at https://www.apple.com/retail.
-
Blank screen unable to restore
I have the satellite A505-S6030 which I have had to reset back to factory reset once before. The screen randomly would go blank and I would have to reboot. Last time it wouldn't reboot I set it back to factory reset and it played relatively nice for 6 months still going to a blank screen but coming back on a reboot. Now it won't reboot to anything other than a blank screen with a curser. I have tried resetting it to factory and that won't work. Nor with the repair/restore disk I created after purchase. I have tried repair, safe mode, boot to DVD and all run through a brief cycle and then end ultimately up on the blank screen with the curser. Any suggestions or is this a lost cause? If I put a new hard drive in it would that make a difference?
mcensor, what info on recovery discs do you need? If holding '0' as you boot to use the recovery partition doesn't work, you'll want to use your external media. If you don't have any, you can order it. Let me know if you have specific questions.
OtisJustice, sometimes it doesn't boot, and sometimes it does?
- Peter -
THe mail app on my ipad 2 quits right after launching. This happened as I was forwarding an email with a long attachment. Now I get a blank screen with just the icons, no mail mailboxes etc. after a few seconds that blank screen disappears and we go back to the starter screen. I tried rebooting, relaunching but no luck so far. Can somebody help me? Thanks
Hans VHave you tried removing the email account from the app through settings? I would try removing it, rebooting, opening the email app to see if it still crashes, & then adding it back your email account.
If you're leary about causing more issues while you're not home, you could always try using a third party mail app (there are many), accessing your email through it...not a fix for your problem but a way to deal with the situation until you can get it worked out.
Resetting all settings on the iPad (not deleting content) is a good way to clear many errors as it can remove leftover cache files & files that have become corrupt.
Sorry I couldn't be of more help. Good luck & let us know if you get it working. -
Hi everyone,
I have been using imovie a lot on my macbook and never had any problems. Last night however I deleted two events in my library. Then restarted my macbook as sometimes after working on it for a while it gets slow. So anyway when I opened it up again it just hung on a blank screen with nothing happening. It didnt bring up the usual screen panels for importing, or editing, or any of the normal stuff.
My husband deleted the application and then reinstalled it. Same thing happening!! Any advice??Another easy way to fix this.
What I've noticed is that upon upgrading your projects and events to work with iMovie 10, initially it will work... Until you quit iMovie and reopen it again. Any events with hashtags will show up without the star next to the iMovie event. SO, if you happen to read this, after upgrading to iMovie 10 from its predecessor, immediately change the event name to NOT include a hashtag/pound symbol.
Otherwise, if it's too late, you can either do the above or this...
Hold down option and click on iMovie. This will prompt you Locate, Create a New Library, Cancel this window, or Choose a different library. What you want to do is create a new library, call it whatever you want to, this will only be temporary. After the program opens, it should be a blank Library. Then go to File > Open Library > iMovie Library (your original library) and proceed to change the name of your events. Quit the program. Go into your Movies folder in Finder, delete the library you temporarily created, and your back in business. -
Help! I attempted to send an email that apparently was too large (pics). Now, every time I go into the mail app, the screen is blank, and after a few seconds, returns to my home screen. I've done the soft & hard reboot many times. I've also deleted and recreated the email accounts. I have 2 email accounts on my iPad & I even deleted the one I was not using at the time I tried to send the large email.
Short of a full factory reset, any other suggestions? Greatly appreciated!Thanks Brian, for your quick response. I've tried the hard re-boot (Power + Home Button) a few times, with no luck fixing the blank screen. I deleted all email accounts, tried the hard reboot, then re-added my aol email account. Interestingly, after this, my mail icon correctly shows that I have 2 new emails (so my iPad is "seeing" my aol email account). But I still get a mail blank screen when I open the iPad mail app, and it still quits after a few seconds.
-
Blank Screen with cursor after login Windows 7, Unable to start new tasks
My problem is similar to the well know Windows 7 Black Screen as referenced by Prevx, though different. When I boot my Windows 7 computer, the login screen appears as always. Following entering the password for default user,
the screen will give the impression of login, but the final result is a plain black screen with the cursor only. The black screen appears indefinitely and the Windows GUI never appears. The only available option from booting in normal mode with this is Ctrl-Alt-Del
(Task Manager). From analyzing another computer with Windows 7 Professional, my Task Manager is missing the following user processes: dwm.exe, explorer.exe, and taskhost.exe. Additionally, it is missing the following system processes (possibly irrelevant):
spoolsv.exe and wmiprvse.exe.
When I attempt to start a new process using Windows Task Manager, an error message will appear saying “Windows Task Manager has stopped working” and forces you to close Windows Task Manager. This includes starting
any process such as cmd or explorer.
I attempted to boot into safe mode.
The result was the same as above. Then I attempted booting into safe mode with command prompt. This showed some hope. Following authentification from the login screen, the command prompt appears with the same blank screen with a cursor behind it. Initially
I attempted to run msconfig.msc to run a clean startup. System Configuration Utilities opens briefly then displays the error same as above. “System Configuration Utility has stopped working” and again forces the program to close. Then I tried to
open regedit. This works with no error messages! So I have access to the registry, but have no idea what I should modify to get my computer running normally.
Things I have tried:
1)
Restoring to last know good configuration. (No result)
2)
Repairing Windows configuration. (No result)
3)
Scanning the drive 3 separate times for viruses with both Avast and Symantec. (No viruses detected)
4)
Repairing the REG_SZ value HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell as proposed in
http://social.technet.microsoft.com/Forums/en/w7itprogeneral/thread/5b94b775-992e-4f48-b3ff-c89b3cf45e82
5)
Executing Prevx’s fix file as proposed in
http://www.prevx.com/blog/140/Black-Screen-woes-could-affect-millions-on-Windows--Vista-and-XP.html
Any ideas are much appreciated.
Thanks,
JohnSame problem I've found a solution.
#1 Hit fastly 5 time the left shitf button on your keyboard.
A windows will appaers to know if you want to caps lock. Keep it open
#2 Alt-CTRL-Del
You have know your desktop
#3 Go on add-remove programme
3a) Go on windows add-remove
3b) Remove internet explorer
ok-ok-ok - untill it's remove and ask to restart
#4 No more problem. You have to go on the net with chrome or firefox. -
Unable to boot laptop, blank screen, even no HP logo is seen
I've a HP G42 laptop with following configuration.<br>4GB ram, 500gb hdd, 1 gb 5400 ati graphic card, i5 processor.<br>For past few weeks, it was showing a different behaviour: running for few minutes and then dislay got in Not responding mode, after that abnormal shutdown, and couldnt even restart my pc for next few hours.<br>I'm still facing this issue, explained below:<br>When i try to boot then it shows blank screen, it doesnt show HP logo even. But i could listen fan sound, caps lights etc. LED glows white for a while (normal), but later turns into orange, and then not even caps lock LED glows, but fan is still working.<br><br>I tried many things but couldn't fix.<br>Also tried 'Removed battery, press power button for 30-40sec, and power on throug AC adapter', but couldn't fix.<br>Please help :-( :-(
Hi,
You can follow the steps listed in the below link and could you mention the complete product number & model number of unit.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&tmp_task=solveCategory&cc=us&dlc=en&lc...
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem. -
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
[MOOT] UEFI USB Install (from 201306 image) - blank screen during boot
I am trying to install Arch Linux on a Lenovo ThinkPad T431s.
I created a bootable UEFI USB disk image following the instructions on the wiki.
https://wiki.archlinux.org/index.php/UE … B_from_ISO
Attempting to boot from this image I get to a screen that looks like:
Arch Linux archiso x86_64 UEFI USB
UEFI Shell x86_64 v1
UEFI Shell x86_64 v2
After selecting the first option, I get a blank screen.
This appears to be the same (or very similar) to the following issues:
[1] https://bbs.archlinux.org/viewtopic.php?id=151599
[2] https://bbs.archlinux.org/viewtopic.php?id=158530
As suggested by
https://wiki.archlinux.org/index.php/Beginners'_Guide#Preparation
I tried appending a number of things to the initrd line
nomodeset
video=SVIDEO-1:d
i915.modeset=0
with no success (the blank screen was exactly the same).
Some posts in thread [2] indicated that booting in legacy bios mode worked. I created a new disk image (again following the wiki instructions: https://wiki.archlinux.org/index.php/US … ion_Media) and was able to confirm that I could successfully boot from this other image after switching into legacy mode.
In thread [1], there was the suggestion to go into a UEFI shell and try a command like
Shell > fs0:
FS0:\ > cd \arch\boot\x86_64
FS0:\arch\boot\x86_64\ > vmlinuz archisobasedir=arch archisolabel=ARCH_201306 initrd=\arch\boot\x86_64\archiso.img
which I did. After pressing enter nothing happened (the screen did not go blank, all the text remained, no messages appeared).
Eventually in that same thread, a workaround was suggested in this post. I have not tried this because I was unable to understand what exactly was being done, both because of the terse nature of the post and the fact that the referenced article is not in a language which I read (and google translate did not make it clear enough). I was unable to evaluate whether that was a sensible thing to do.
Now, finally, the questions
Firstly, does anyone have any suggestions about how to solve or troubleshoot my blank screen issue?
If not, does anyone have an opinion about which of the workarounds (switching into legacy mode or the one that I don't quite understand yet) would be better? I am not planning to dual boot the system, so I do not need to use UEFI to be win8 friendly, etc.
Last edited by wesphys (2013-06-07 14:36:28)Auric wrote:
Neri, did you get any further with this? I just got my own Thinkpad Yoga and am facing the same problems. Everything works fine in legacy Boot but the screen stays black on UEFI boot regardless of the known workarounds.
might it help to first install using legacy boot and later on convert to UEFI?
Not really with Arch directly anyways. What you can do is:
1. Use Fedora 20 USB to boot the sucker up
2. Use Archlinux-bootstrap install (download expand etc)
3. Use refind as the bootmanager seems to solve the dual boot issues
ATM i'm fighting a mkinitcpio segfault. But that is after the installation was basically successful. It would be nice if we can find a way to fix the install medium ...
EDIT:
All sorted out. Unfortunately you'll have to bypass the Archlinux Install medium and resort to the fedora 20 installer. I used the XFCE4
version for a smaller download.
Here are the basic steps for a Dual-Boot setup:
In windows (Disk Management) truncate your C: Drive. I ended up making basically what will became /dev/sda4 smaller and didn't not
touch any partition or free space before that. Here's the final Layout:
/dev/sda:
empty space
1. recovery partition
2. ESP
3. reserved
4. windows
5. Linux Root
6. Linux home
7. Swap
The installation happened from within Fedora Live using an Archlinux Boot strap image according to the Wiki for installing from an
existing Linux and the Wiki Installation Guide. I mounted /dev/sda2 (aka. the existing ESP partition) as /boot and installed refind
according to the wiki. Please note, when you install Arch through the archlinux bootstrap method make sure you pacman -S archlinux-keyring
in the bootstrap chroot first before you run the pacstrap command - it will accelerate the process tremendously!
Last edited by neri (2014-01-02 21:40:31) -
New Install - startx results in blank screen with mouse cursor
I installed Arch on my desktop last week with no issues, so I wanted to install it on an old THinkpad R31. Everything with the installation went smooth, but when I try to 'startx' all I get is a blank screen with a mouse cursor that I can move around. I've installed xorg-xinit, xorg-twm, xorg-xclock, and xterm.
I'm not getting any significant errors in the logs, or even the terminal I issue 'startx' in.
I'm not sure what the problem could be...
Here is my output from 'startx'
X.Org X Server 1.13.0
Release Date: 2012-09-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.6.0-1-ARCH i686
Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
Build Date: 05 October 2012 02:01:30PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
xinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 0 (Success) on X server ":0"
after 554 requests (554 known processed) with 0 events remaining.
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
Server terminated successfully (0). Closing log file.
xinit: unexpected signal 2
And my Xorg.0.log
[ 4955.478]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 4955.479] X Protocol Version 11, Revision 0
[ 4955.479] Build Operating System: Linux 3.6.0-1-ARCH i686
[ 4955.479] Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
[ 4955.479] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
[ 4955.479] Build Date: 05 October 2012 02:01:30PM
[ 4955.479]
[ 4955.479] Current version of pixman: 0.26.2
[ 4955.479] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4955.479] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4955.480] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
[ 4955.480] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4955.480] (==) No Layout section. Using the first Screen section.
[ 4955.480] (==) No screen section available. Using defaults.
[ 4955.480] (**) |-->Screen "Default Screen Section" (0)
[ 4955.480] (**) | |-->Monitor "<default monitor>"
[ 4955.481] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4955.481] (==) Automatically adding devices
[ 4955.481] (==) Automatically enabling devices
[ 4955.481] (==) Automatically adding GPU devices
[ 4955.481] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 4955.481] Entry deleted from font path.
[ 4955.481] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4955.481] Entry deleted from font path.
[ 4955.481] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 4955.481] Entry deleted from font path.
[ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4955.481] Entry deleted from font path.
[ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4955.481] Entry deleted from font path.
[ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4955.481] (==) FontPath set to:
/usr/share/fonts/misc/
[ 4955.481] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4955.481] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4955.481] (II) Loader magic: 0x825a620
[ 4955.482] (II) Module ABI versions:
[ 4955.482] X.Org ANSI C Emulation: 0.4
[ 4955.482] X.Org Video Driver: 13.0
[ 4955.482] X.Org XInput driver : 18.0
[ 4955.482] X.Org Server Extension : 7.0
[ 4955.484] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4955.486] (--) PCI:*(0:0:2:0) 8086:3577:1014:0505 rev 4, Mem @ 0x98000000/134217728, 0x90100000/524288
[ 4955.486] (--) PCI: (0:0:2:1) 8086:3577:1014:0505 rev 0, Mem @ 0x88000000/134217728, 0x80200000/524288
[ 4955.486] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4955.486] Initializing built-in extension Generic Event Extension
[ 4955.486] Initializing built-in extension SHAPE
[ 4955.486] Initializing built-in extension MIT-SHM
[ 4955.486] Initializing built-in extension XInputExtension
[ 4955.486] Initializing built-in extension XTEST
[ 4955.486] Initializing built-in extension BIG-REQUESTS
[ 4955.486] Initializing built-in extension SYNC
[ 4955.487] Initializing built-in extension XKEYBOARD
[ 4955.487] Initializing built-in extension XC-MISC
[ 4955.487] Initializing built-in extension SECURITY
[ 4955.487] Initializing built-in extension XINERAMA
[ 4955.487] Initializing built-in extension XFIXES
[ 4955.487] Initializing built-in extension RENDER
[ 4955.487] Initializing built-in extension RANDR
[ 4955.487] Initializing built-in extension COMPOSITE
[ 4955.487] Initializing built-in extension DAMAGE
[ 4955.487] Initializing built-in extension MIT-SCREEN-SAVER
[ 4955.487] Initializing built-in extension DOUBLE-BUFFER
[ 4955.487] Initializing built-in extension RECORD
[ 4955.487] Initializing built-in extension DPMS
[ 4955.487] Initializing built-in extension X-Resource
[ 4955.487] Initializing built-in extension XVideo
[ 4955.487] Initializing built-in extension XVideo-MotionCompensation
[ 4955.487] Initializing built-in extension XFree86-VidModeExtension
[ 4955.487] Initializing built-in extension XFree86-DGA
[ 4955.487] Initializing built-in extension XFree86-DRI
[ 4955.487] Initializing built-in extension DRI2
[ 4955.487] (II) LoadModule: "glx"
[ 4955.488] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4955.489] (II) Module glx: vendor="X.Org Foundation"
[ 4955.489] compiled for 1.13.0, module version = 1.0.0
[ 4955.489] ABI class: X.Org Server Extension, version 7.0
[ 4955.489] (==) AIGLX enabled
[ 4955.489] Loading extension GLX
[ 4955.489] (==) Matched intel as autoconfigured driver 0
[ 4955.489] (==) Matched intel as autoconfigured driver 1
[ 4955.489] (==) Matched vesa as autoconfigured driver 2
[ 4955.489] (==) Matched modesetting as autoconfigured driver 3
[ 4955.489] (==) Matched fbdev as autoconfigured driver 4
[ 4955.489] (==) Assigned the driver to the xf86ConfigLayout
[ 4955.489] (II) LoadModule: "intel"
[ 4955.490] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4955.491] (II) Module intel: vendor="X.Org Foundation"
[ 4955.491] compiled for 1.13.0, module version = 2.20.9
[ 4955.491] Module class: X.Org Video Driver
[ 4955.491] ABI class: X.Org Video Driver, version 13.0
[ 4955.491] (II) LoadModule: "vesa"
[ 4955.491] (WW) Warning, couldn't open module vesa
[ 4955.491] (II) UnloadModule: "vesa"
[ 4955.492] (II) Unloading vesa
[ 4955.492] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4955.492] (II) LoadModule: "modesetting"
[ 4955.492] (WW) Warning, couldn't open module modesetting
[ 4955.492] (II) UnloadModule: "modesetting"
[ 4955.492] (II) Unloading modesetting
[ 4955.492] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4955.493] (II) LoadModule: "fbdev"
[ 4955.493] (WW) Warning, couldn't open module fbdev
[ 4955.493] (II) UnloadModule: "fbdev"
[ 4955.493] (II) Unloading fbdev
[ 4955.493] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4955.493] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 4955.496] (--) using VT number 7
[ 4955.508] (II) intel(0): using device path '/dev/dri/card0'
[ 4955.509] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4955.509] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4955.509] (==) intel(0): RGB weight 888
[ 4955.509] (==) intel(0): Default visual is TrueColor
[ 4955.509] (--) intel(0): Integrated Graphics Chipset: Intel(R) i830M
[ 4955.509] (**) intel(0): Relaxed fencing disabled
[ 4955.509] (**) intel(0): Wait on SwapBuffers? enabled
[ 4955.509] (**) intel(0): Triple buffering? enabled
[ 4955.509] (**) intel(0): Framebuffer tiled
[ 4955.510] (**) intel(0): Pixmaps tiled
[ 4955.510] (**) intel(0): 3D buffers tiled
[ 4955.510] (**) intel(0): SwapBuffers wait enabled
[ 4955.510] (==) intel(0): video overlay key set to 0x101fe
[ 4955.593] (II) intel(0): Output VGA1 has no monitor section
[ 4955.593] (II) intel(0): Output LVDS1 has no monitor section
[ 4955.594] (--) intel(0): found backlight control interface /sys/class/backlight/thinkpad_screen
[ 4955.676] (II) intel(0): EDID for output VGA1
[ 4955.677] (II) intel(0): Printing probed modes for output VGA1
[ 4955.677] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4955.677] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4955.677] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4955.677] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 4955.677] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 4955.677] (II) intel(0): EDID for output LVDS1
[ 4955.677] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4955.677] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Printing probed modes for output LVDS1
[ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz P)
[ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 4955.678] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 4955.678] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 4955.678] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 4955.678] (II) intel(0): Output VGA1 connected
[ 4955.678] (II) intel(0): Output LVDS1 connected
[ 4955.678] (II) intel(0): Using exact sizes for initial modes
[ 4955.678] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 4955.678] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 4955.678] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4955.678] (II) intel(0): Kernel page flipping support detected, enabling
[ 4955.678] (==) intel(0): DPI set to (96, 96)
[ 4955.678] (II) Loading sub module "fb"
[ 4955.678] (II) LoadModule: "fb"
[ 4955.679] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4955.679] (II) Module fb: vendor="X.Org Foundation"
[ 4955.679] compiled for 1.13.0, module version = 1.0.0
[ 4955.679] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4955.679] (II) Loading sub module "dri2"
[ 4955.679] (II) LoadModule: "dri2"
[ 4955.680] (II) Module "dri2" already built-in
[ 4955.680] (==) Depth 24 pixmap format is 32 bpp
[ 4955.680] (II) intel(0): [DRI2] Setup complete
[ 4955.680] (II) intel(0): [DRI2] DRI driver: i915
[ 4955.680] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 4955.680] (II) UXA(0): Driver registered support for the following operations:
[ 4955.680] (II) solid
[ 4955.680] (II) copy
[ 4955.680] (II) composite (RENDER acceleration)
[ 4955.680] (II) put_image
[ 4955.680] (II) get_image
[ 4955.680] (==) intel(0): Backing store disabled
[ 4955.680] (==) intel(0): Silken mouse enabled
[ 4955.681] (II) intel(0): Initializing HW Cursor
[ 4955.681] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4955.684] (==) intel(0): DPMS enabled
[ 4955.684] (==) intel(0): Intel XvMC decoder disabled
[ 4955.684] (II) intel(0): Set up overlay video
[ 4955.684] (II) intel(0): direct rendering: DRI2 Enabled
[ 4955.684] (==) intel(0): hotplug detection: "enabled"
[ 4955.983] (--) RandR disabled
[ 4956.021] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4956.021] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context
[ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4956.021] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 4956.021] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4956.021] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4956.021] (II) AIGLX: Loaded and initialized i915
[ 4956.022] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4956.023] (II) intel(0): Setting screen physical size to 270 x 203
[ 4956.124] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 4956.124] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4956.124] (II) LoadModule: "evdev"
[ 4956.124] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4956.125] (II) Module evdev: vendor="X.Org Foundation"
[ 4956.125] compiled for 1.13.0, module version = 2.7.3
[ 4956.125] Module class: X.Org XInput Driver
[ 4956.125] ABI class: X.Org XInput driver, version 18.0
[ 4956.125] (II) Using input driver 'evdev' for 'Power Button'
[ 4956.125] (**) Power Button: always reports core events
[ 4956.125] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 4956.126] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4956.126] (--) evdev: Power Button: Found keys
[ 4956.126] (II) evdev: Power Button: Configuring as keyboard
[ 4956.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 4956.126] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4956.126] (**) Option "xkb_rules" "evdev"
[ 4956.126] (**) Option "xkb_model" "evdev"
[ 4956.126] (**) Option "xkb_layout" "us"
[ 4956.197] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 4956.198] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4956.198] (II) Using input driver 'evdev' for 'Video Bus'
[ 4956.198] (**) Video Bus: always reports core events
[ 4956.198] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 4956.198] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4956.198] (--) evdev: Video Bus: Found keys
[ 4956.198] (II) evdev: Video Bus: Configuring as keyboard
[ 4956.198] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input2/event2"
[ 4956.198] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4956.198] (**) Option "xkb_rules" "evdev"
[ 4956.198] (**) Option "xkb_model" "evdev"
[ 4956.198] (**) Option "xkb_layout" "us"
[ 4956.200] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 4956.200] (II) No input driver specified, ignoring this device.
[ 4956.200] (II) This device may have been added with another device file.
[ 4956.201] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 4956.201] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4956.201] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4956.202] (**) Sleep Button: always reports core events
[ 4956.202] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 4956.202] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4956.202] (--) evdev: Sleep Button: Found keys
[ 4956.202] (II) evdev: Sleep Button: Configuring as keyboard
[ 4956.202] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 4956.202] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 4956.202] (**) Option "xkb_rules" "evdev"
[ 4956.202] (**) Option "xkb_model" "evdev"
[ 4956.202] (**) Option "xkb_layout" "us"
[ 4956.204] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4956.205] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4956.205] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4956.205] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4956.205] (**) AT Translated Set 2 keyboard: always reports core events
[ 4956.205] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4956.205] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4956.205] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4956.205] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 4956.205] (**) Option "xkb_rules" "evdev"
[ 4956.206] (**) Option "xkb_model" "evdev"
[ 4956.206] (**) Option "xkb_layout" "us"
[ 4956.208] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
[ 4956.208] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 4956.208] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 4956.208] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 4956.208] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4956.208] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 4956.208] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 10)
[ 4956.209] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 4956.210] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
[ 4956.210] (II) No input driver specified, ignoring this device.
[ 4956.210] (II) This device may have been added with another device file.
[ 4956.211] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 4956.211] (II) No input driver specified, ignoring this device.
[ 4956.211] (II) This device may have been added with another device file.
[ 4956.213] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
[ 4956.213] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 4956.213] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 4956.213] (**) ThinkPad Extra Buttons: always reports core events
[ 4956.213] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
[ 4956.214] (--) evdev: ThinkPad Extra Buttons: Vendor 0x1014 Product 0x5054
[ 4956.214] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 4956.214] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 4956.214] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
[ 4956.214] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 11)
[ 4956.214] (**) Option "xkb_rules" "evdev"
[ 4956.214] (**) Option "xkb_model" "evdev"
[ 4956.214] (**) Option "xkb_layout" "us"
[ 4960.630] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 4964.186] (II) evdev: ThinkPad Extra Buttons: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: AT Translated Set 2 keyboard: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: Sleep Button: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: Video Bus: Close
[ 4964.190] (II) UnloadModule: "evdev"
[ 4964.190] (II) evdev: Power Button: Close
[ 4964.190] (II) UnloadModule: "evdev"
[ 4964.192] Server terminated successfully (0). Closing log file.karol wrote:
Leonid.I wrote:@0x001A4:
To run twm, you need to install xorg-twm from [extra] (I am not sure if it installs by default). Do you have xterm installed?
According to his first post he has both xorg-twm and xterm installed.
I do indeed.
I went ahead and installed LXDE anyways, just to see what would happen. Exact same thing, it looks like everything is about to load but only the mouse cursor shows up. My Xorg.0.log is the same, so I won't post it again.
I do get an error in the console about the openbox menu.xml file missing but I doubt that's related.
X.Org X Server 1.13.0
Release Date: 2012-09-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.6.0-1-ARCH i686
Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
Build Date: 05 October 2012 02:01:30PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 15 18:12:28 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Openbox-Message: Unable to find a valid menu file "/usr/share/lxde/openbox/menu.xml"
xinit: connection to X server lost
waiting for X server to shut down pcmanfm: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
after 2326 requests (2323 known processed) with 0 events remaining.
Server terminated successfully (0). Closing log file.
xinit: unexpected signal 2
.xinitrc for my user
exec ck-launch-session startlxde
Very wierd. -
I can't do it! I am willing to add questions but I can't because it just shows me a blank screen. I even tried rebooting my entire iPad2 and that didn't work. I know it is not a certain app because I tried multiple ones.... HELP!
found answer on another thread...passing along
https://discussions.apple.com/thread/4052317?start=30&tstart=0
Re: Forced Apple ID Security Questions - Choice of 3
Sep 26, 2012 11:38 AM (in response to KirstyHenderson)
Hi all! I have found the answer in another forum and this has 100% worked for me!!!
1) Quit App Store in multi-tasking.
•From the Home screen, click the Home button twice.
•Tap and hold on the app.
•When it starts to jiggle, tap the red ⛔ in the top corner to close it;
***Please close all open apps on your phone***
2) Tap Settings.
3) Tap Safari.
4) Tap Clear History.
5) Tap the Clear History button.
6) Tap Clear Cookies and Data.
7) Tap the Clear Cookies and Data button
See the answer in context
I hope this helps a lot of people!! Spread the word (seeing as apple doesn't seem to want to/care!)
Nads -
Blank screen when Back on ALV report
Hello All,
I have written an ALV report and when I click BACK on the output list, instead of taking me back to selection screen it is giving a blank screen, and again clicking BACK is giving me selection screen.
ALV output -->> BACK --> Blank screen --> BACK --> Selection screen
I am unable to trace out why this is happenning. I want behavour as it dies for other alv report.
ALV output --> BACK --> Selection Screen.
Any suggestions are highly appreciated.
Thanks-I am using a FM, its a straight forward ALV report,
Getting data from different tables in to final output internal table, calling a function module to display ALV.
h_repid = sy-repid.
h_variant-report = h_repid.
t_slis_layout_alv-zebra = 'X'.
t_slis_layout_alv-colwidth_optimize = 'X'.
PERFORM get_fieldcat_summary.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = h_repid
is_layout = t_slis_layout_alv
it_fieldcat = t_fieldcat1[]
i_save = 'A'
is_variant = h_variant
TABLES
t_outtab = it_main[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks- -
7961G-GE stuck in constant reboot with a blank screen
Hi all,
I just bought a used 7961G-GE and attempted to implement it into my current running CME environment. For some reason my 7961G-GE is constantly rebooting with a blank screen upon receiving power from my 3550 switch. I currently have 2 7940's and a 7961G that have registered without any issues. I tried to debug tftp event's on my router to see if at least my 7961G-GE was able to contact the TFTP server but I get no results at all. I also did a dhcp bindings check and it looks like the 7961G-GE phone is unable to get an ip address either. I have the proper option 150 configurations as my other phones are able to reach the tftp server without any issues. I've also uploaded and tried firmware versions 8.2 through 8.5 and assigned the proper file to the load command. When I do a "more system:/its/vrf1/XMLDefault.cnf.xml" to see if the command was executed, it shows the correct file within the open and close tags of the proper load information tags. This is just really baffling to me because I'm getting no response at all when I try to debug the events with this phone with the exeception of it rebooting every few seconds with a blank screen. I do get an error message when I do the load command that says "
LOAD COMMAND ERROR:cnf-file location system is not supported,Plese use flash|slot0|tftpUpdating CNF files", but again, when I look at the XML files that all my phones request they all show the proper info within their tags including 7961G-GE.
Any pointer's as to why this is happening?
Thanks
-JasonMaybe the unit was in the middle of a complete flash reset when the seller pulled the power. Normally a flash reset takes about, wait for it, an hour.
-
i cant use facetime. but my sister can. we share the same account for itunes.but when i go to facetime on my ipod touch and click on create a new account a blank screen pops up and the only thing it says is cancel and account. what do i do?
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Maybe you are looking for
-
How to modify a lookup field-type to use checkbox instead of radiobutton?
How to modify a lookup field-type to use checkbox instead of radiobutton? I would like to modify the behavior for the lookup field. Normally you get a screen where it is possible to search through a lookup. The items resulted from the search are list
-
After months, my loops and metronome are out of sync
I searched but couldn't find this: added some tracks to a metronome track, played them back and they are way off. I've recorded hundreds of tracks and they sync up no problem, added loops, still no problem. What could I have done to make everything o
-
PhotosInfoPro and metadata on iPad
I didn't see it mentioned here as I struggled with metadata import and organization (I'm moving from Aperture to LR5). But for those of you who use an iPad in the field this app is great. It's designed to edit metadata in RAW and JPEG files on the iP
-
JEditorPane PageLoader thread causing exceptions, not on EDT
Hello, I have a swing GUI that creates a JEditorPane component and loads up an HTML file using the setPage() method to finally display it. I'm occaisionally getting NullPointerExceptions and ArrayIndexOutOfBoundsExceptions when running the GUI. It is
-
CTI OS answer call but not play agent greeting
hello everyone i config agent greeting in UCCE now i can record the greeting and i config a DN like 60002 with PlayAgentGreeting call type,and the call type associate PlayAgentGreeting script i dial 60002 from my CTI OS client i can hear the greetin