Blank Screen while opening Access Request.
One of our role approvers is getting blank screen while opening an Access Request to approve and also getting blank screen doing search for the access request. See attached. Please advise. Thank you.
v/r,
Mitesh
Hello Mitesh,
if the issue with only specific approver then check authorization
if the issue with all approvers then check below Note
1890137 - Blank screen or only header information comes on the Access Request screen
Regards
Baithi
Similar Messages
-
Blank Screen while navigating from one screen to another in a web applicati
Blank Screen while navigating from one screen to another in a web application.
While navigating through the screens of the web-based application, I get blank screen at times. The application menu bar is still visible and the header and footer jsps are also still available. The main processing frame alone goes blank. Once I get the blank screen, I am able to choose from the menu option and contine navigating through the screens.
The application has been deployed on WebSphere Application Server v6.0 and uses JDK 1.4.2. I have checked the application, server and systemerr logs. And there are no exceptions in any of the log files. There is no difference in the logs for a normal flow and the flow when the blank screen occurs.
The blank screen does not occur always. It occurs around 3 out of 10 times. If you consider a particular page, mostly it loads normally and very few times, the blank screen occurs.
Compression filter is being used and it gets invoked for every request. Size before and after compression also gets printed in the logs.
Could this be causing any issue in terms of memory handled or could any jsp timeout be happening, though there are no exceptions in the logs.Well, since no one has any ideas, here is my two cents worth:
Can you turn off compression and see if the problem goes away? If not, I suggest creating a small separate project with the same functionality as that part of the program that causes problems and see if you can duplicate it. Use System.out.println() in the java code and out.write() in the JSP pages throughout the java and JSP code to write to the log file or console as each section is run to see what section is causing problems. You can also consider commenting out sections of code in your JSP page to see if you can isolate the problem.
I had a similar problem with the screen being blank and this is what I found:
My JSP page had an include tag in it that included another JSP page. The outer JSP page was drawn and waited for the included JSP page to be drawn. The logic took several minutes to run and something timed out. The inner JSP page was never drawn. No log entry occurred. It appears that it was not Apache or Tomcat that caused the problem, but some firewall or similiar such device. If you have a firewall or similar device, see if the person who maintains it can temporarily set its timeout to a very long time (15 minutes) to see if the problem goes away. Apache and Tomcat probably also have a timeout feature too. You will have to read up on their configuration settings on how to set them.
By the way, each of those devices probably has its own log file you can read to see if its reporting an error. -
Blank screen while release working time
Hi,
One particular employee in Prod system (ESS Portal), is getting a blank screen while releasing his working time. (It is working fine for all other users)
I did following things
1. User has all the right master data (backend data)
2. Did a backend trace (ST01/ST05), and find that the RFC for releasing working time is not getting triggered for this user. (It is triggering and working as required for all other users)
3. In backend trace did not find any valid authorization failures.
Please suggest.
Thanks
Krishnamaybe he doesnt have enough portal authorizations. check by giving him the administrator portal role and try again.
-
Getting blank screen while accessing EBS
Hi
Most of the times I get a blank screen when I try to access EBS URL. To make it work I need to restart HTTP Apache service. Please let me know what is the issue with my environment
I am using EBS 12.1.3kumar_1302 wrote:
Hi
Most of the times I get a blank screen when I try to access EBS URL. To make it work I need to restart HTTP Apache service. Please let me know what is the issue with my environment
I am using EBS 12.1.3Please compile JSP files as per (Blank Page Accessing R12 - 'Missing class: _RF' in OACore application.log [ID 467562.1]) and check then.
Thanks,
Hussein -
Email Notification: WorkItem - Unable to open Access Request
Hi,
I am using AC 10.1 with SP06
I have configured Email-notification for the new workitem to approve or reject and this is working completely fine. The approver is getting the mails triggered with the link to goto WorkInbox. All the requests are clearly visible but I (or any approver for that matter) can't open/access the request.
I had copied the URL link by opening the workinbox and then with right click --> Technical help and pasted the same link in the email subject content. Hope this is the right way to provide the link to work-inbox
But I can access/open the same request, if I go via the normal procedures SAPGUI --> NWBC --> MyHome --> Workinbox
Ofcourse, I would've missed some things but not sure what it is.
I have followed http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/605077fc-3577-2e10-e1a6-a743514d4eb3?QuickLink=index&… to come so far.
I assue the issue (not sure though) might be with the package, where I saved the email document, While creating the new email template at the time of saving it, I created one custom package ZGRC, as you can see there are some of the package encapsulation which are not captured. Is this causing the issue?
Awaiting for you quick and positive response.
Thanks,
AmeetHi Alessandro,
I have mentioned the URL link under %PATH% as below:
You mean SSO to NWBC..?
This is not in place till now. But how come this could be the issue..? I understand that SSO will take approver directly to the workinbox link
I have saved my log-in credentials with Chrome browser so whenever i click on the link coming from the email notification, the browser doesn't ask me to enter ID, password and takes me to my workinbox items wherer i can see the requests pending for my approvals.
But if i use the same link on IE, it asks me to enter credentials, as I didn't save the ID and password So, after providing the credentials, I can see the requests pending for my approval, but UNABLE to open/access any of the requests.
I have activated all the required services as well.
Ameet
Message was edited by: Ameet kumar -
Ipod touch Mail Blank Screen- can't access mail
Hi,
When I try to open mail on my ipod touch, it opens a blank/black screen (still with the grey bar at the top with the time) but never comes up with the inbox or any menus to interact with (can't access my mail).
I recently added another imap account. Does it have troubles with too many messages or otherwise- surely it would say that rather than staying on a blank screen.
Any thoughts?Have you tried resetting your ipod by holding the Home & Sleep buttons until you see the Apple logo?
Other things:
Settings>Wifi>select your network>Renew lease
[What to do if you can't send or receive Mail|http://support.apple.com/kb/ts2770] -
Blank screen after opening project
For the past day on both of my computers when I open a project in Premiere, all i get is a blank screen.
Premiere doesn't lock up, but there is nothing there.More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us -
Blank screen while using a ati radeon x1300 pro graphics card
i'm getting a blank screen at start up while using my radeon x1300 pro... dont really know whats wrong with it. the agp slot is good, i'm getting power to the card, my board is set to boot agp/pci for the video so thats good. only problem is is that i'm not sure what the model of my motherboard is to check with compatiblity. got the mb and processor from a buddy of mine. he got the mb and processor from a friends grandpa... so to make long storys short. i have no idea what my computer is made of but from what i hear ati products dont seem to get along well with msi. is there any logical reason? and if so is there anything that i have overlooked here? common problems and such. i've updated everything i could update but still no signs of life comming from my video card " and yes the card was pushed in all the way". any feed back would be appreciated.
Example of what system spex should look like:-
MSI P865 Platinum with 3.A bios ( MS-6728 VER 2 )
Enermax 465 20 pin PSU +3.3V = 35A +5V = 35A +12V = 33A
Intel P4 Northwood 3.0Ghz (No overclock) (Arctic cooling Freezer HSF unit with Coolalabs thermal metal coolant)
512Mb Corsair XMS ddr400 memory (2x256Mb in dual mode)
Trust Dugital Pci Sound card
Nvidia 6800GT 256Mb memory AGP card (No overclock)
80Gb Western Digital IDE hard disk on Primary
LG DVD IDE optical drive on Secondary
Jeantech Phong case (120mm in front intake and 120mm at back exhaust)
Win 98 SE (Del modded edition)
I am sure this will help you.
Del -
Getting blank screen while taking F1 help in SAP.
Hi all,
When I take F1 help for any text in SAP, I'm getting a blank screen instead of the Documentation/ explanation.
Also at times, I'm getting blank windows for some of the standard errors & for some standard program's documentation.
Heard it is a problem due to some missing patch...while installing SAP.
How to install this missing patch?
Any advise to rectify this problem would be of great help.
Regards,
Vamsee Priya.if you had any recent IE (internet explorer) updated revert it back, some times that will fix this as well.... or have a latest version 7.0 of GUI.
The official download site for patches for the SAP GUI for Windows and the SAP GUI for Windows installation is the "Software Center" on the "SAP Service Marketplace": http://service.sap.com/swcenter-main (password is required).[ more>>>|http://www.saptechies.com/faq-gui-patches/] -
Blank screen while pressing "Cancel" or "Back" button in Portal
Hi Experts,
We have a peculiar problem.
The user is trying to access time levelling report (which is a
iView) in MSS.
The user is getting the output of the report. When the user tries to press "back button" from the output screen (which is a SAP Transaction iView) the user is getting blank screen insted of report input screen.
Please suggest me some hints to resolve this.
Thanks
AbdulI was calling details screen( screen called from ALV) using call screen in double click event. I changed this to SET SCREEN 110.LEAVE SCREEN. Now my back button in ALV screen started working as expected.
Thanks for your answers.
Joby -
SAP GRC10 - Error while submitting Access Request
Hello All,
<<Removed>>
While submitting the request ...getting below mentioned error on the page
Error while processing your query
What has happened?
The URL call http://<<removed>>/sap/bc/webdynpro/SAP/GRAC_GAF_ACC_REQ_WITH_REQ_REF was terminated because of an error.
Note
The following error text was processed in system GD1 : Conversion of type h to type N not supported.
The error occurred on the application server blrkec220748d_GD1_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_DUE_DATE of program CL_GRAC_ACCESS_REQUEST_UTIL===CP
Method: GET_DUE_DATE of program CL_GRAC_MODEL_ACCESS_REQUEST==CP
Method: IF_GRFN_API_MODEL~SAVE of program CL_GRAC_MODEL_ACCESS_REQUEST==CP
Method: SAVE of program CL_GRFN_API_SESSION===========CP
Method: CREATE of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: IF_COMPONENTCONTROLLER~CREATE of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: PROCESS_EVENT of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: IWCI_IF_FPM_UI_BUILDING_BLOCK~PROCESS_EVENT of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: CALL_UIBB_PROCESS_EVENT of program CL_FPM========================CP
Method: PROCESS_EVENT of program CL_FPM========================CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system GD1 in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server blrkec220748d_GD1_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you cansearch for further information in the trace file for the work process 1 in transaction ST11 on the application server. <<Removed>>
. You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 400 -u: 163554 -l: E -s: GD1 -i: blrkec220748d_GD1_00 -w: 1 -d: 20111005 -t: 195025 -v: RABAX_STATE -e: OBJECTS_MOVE_NOT_SUPPORTED -X: 1078D28404571EE0BBEBA3BBD9492C36_1078D28404571EE0BBEBA40E1A426C36_1 -x: 1D5DEFE0CADEF14FAC361078D2840457
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
============================================================
Please find below error Log from SLG1
Config Error,Function Module is not maintained for Plug-in
Thanks,
Jagat
Edited by: Matt on Jan 25, 2012 3:24 PMHello Aman,
Please find Below Dump Details downloaded from ST22
Category ABAP Programming Error
Runtime Errors OBJECTS_MOVE_NOT_SUPPORTED
ABAP Program CL_GRAC_ACCESS_REQUEST_UTIL===CP
Application Component GRC-AC
Date and Time 07.10.2011 10:47:56
Short text
Conversion of type "h" to type "N" not supported.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_GRAC_ACCESS_REQUEST_UTIL===CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to move one data object to another.
This is not possible here because the conversion of a data object
of type "h" to type "N" is not supported.
Trigger Location of Runtime Error
Program CL_GRAC_ACCESS_REQUEST_UTIL===CP
Include CL_GRAC_ACCESS_REQUEST_UTIL===CM018
Row 59
Module type (METHOD)
Module Name GET_DUE_DATE
Source Code Extract
Line SourceCde
29
30 *-get function id from application & process id
31 CALL METHOD cl_grac_access_request_util=>get_appl_mapping_data
32 EXPORTING
33 iv_application_id = lv_application_id
34 iv_process_type = iv_process_id
35 IMPORTING
36 et_application_data = lt_application_data.
37
38 *only 1 record would exist in appl data table for appl id & process id
39 READ TABLE lt_application_data INTO ls_application_data
40 INDEX 1.
41 lv_fdt_uuid = ls_application_data-functionid.
42 *--
43 IF it_brftab IS NOT INITIAL
44 AND lv_fdt_uuid IS NOT INITIAL.
45
46 *-execute brf+ rule
47 TRY.
48 CALL METHOD cl_grfn_ac_brfp=>execute_brf_rule
49 EXPORTING
50 iv_func_uuid = lv_fdt_uuid
51 it_data = it_brftab
52 IMPORTING
53 et_data = lr_result.
54 CATCH cx_grfn_exception .
55 ENDTRY.
56
57 IF lr_result IS BOUND.
58 ASSIGN lr_result->* TO <lr_result>.
>>>>> lv_sla_id = <lr_result>.
60 ENDIF.
61
62 READ TABLE lt_sla INTO ls_sla
63 WITH KEY sla_id = lv_sla_id.
64 IF sy-subrc EQ 0.
65 ev_sla_id = ls_sla-sla_id. "sla id
66
67 *calculate due date
68 CALL FUNCTION 'END_TIME_DETERMINE'
69 EXPORTING
70 duration = ls_sla-sla_days
71 unit = '10'
72 IMPORTING
73 end_date = ev_due_date " due date
74 CHANGING
75 start_date = sy-datum
76 start_time = sy-uzeit
77 EXCEPTIONS
78 factory_calendar_not_found = 1
Active Calls/Events
No. Ty. Program Include Line
Name
26 METHOD CL_GRAC_ACCESS_REQUEST_UTIL===CP CL_GRAC_ACCESS_REQUEST_UTIL===CM018 59
CL_GRAC_ACCESS_REQUEST_UTIL=>GET_DUE_DATE
25 METHOD CL_GRAC_MODEL_ACCESS_REQUEST==CP CL_GRAC_MODEL_ACCESS_REQUEST==CM00Y 47
CL_GRAC_MODEL_ACCESS_REQUEST=>GET_DUE_DATE
24 METHOD CL_GRAC_MODEL_ACCESS_REQUEST==CP CL_GRAC_MODEL_ACCESS_REQUEST==CM004 420
CL_GRAC_MODEL_ACCESS_REQUEST=>IF_GRFN_API_MODEL~SAVE
23 METHOD CL_GRFN_API_SESSION===========CP CL_GRFN_API_SESSION===========CM004 11
CL_GRFN_API_SESSION=>SAVE
22 METHOD /1BCWDY/Z3TZZFT9CG8486P2AANU==CP /1BCWDY/B_Z3TZZFT9CG8486P2AAU5 3404
CL_COMPONENTCONTROLLER_CTR=>CREATE
Web Dynpro Component GRAC_UIBB_ACCESS_REQUEST
Controller COMPONENTCONTROLa
21 METHOD /1BCWDY/Z3TZZFT9CG8486P2AANU==CP /1BCWDY/B_Z3TZZFT9CG8486P2AAU5 159
CLF_COMPONENTCONTROLLER_CTR=>IF_COMPONENTCONTROLLER~CREATE
Web Dynpro Component GRAC_UIBB_ACCESS_REQUEST
Controller COMPONENTCONTROLLER
20 METHOD /1BCWDY/Z3TZZFT9CG8486P2AANU==CP /1BCWDY/B_Z3TZZFT9CG8486P2AAU5 7374
CL_COMPONENTCONTROLLER_CTR=>PROCESS_EVENT
Web Dynpro Component GRAC_UIBB_ACCESS_REQUEST
Controller COMPONENTCONTROLLER
19 METHOD /1BCWDY/Z3TZZFT9CG8486P2AANU==CP /1BCWDY/B_Z3TZZFT9CG8486P2AAU5 534
CLF_COMPONENTCONTROLLER_CTR=>IWCI_IF_FPM_UI_BUILDING_BLOCK~PROCESS_EVENT
Web Dynpro Component GRAC_UIBB_ACCESS_REQUEST
Controller COMPONENTCONTROLLER
18 METHOD CL_FPM========================CP CL_FPM========================CM00G 46
CL_FPM=>CALL_UIBB_PROCESS_EVENT
17 METHOD CL_FPM========================CP CL_FPM========================CM005 46
CL_FPM=>PROCESS_EVENT
16 METHOD CL_FPM========================CP CL_FPM========================CM00C 34
CL_FPM=>RUN_EVENT_LOOP
15 METHOD CL_FPM========================CP CL_FPM========================CM00O 8
CL_FPM=>RAISE_EVENTS
14 METHOD /1BCWDY/Z3TZZFT9CG847SKLEJYU==CP /1BCWDY/B_Z3TZZFT9CG847SKLEK56 2997
CL_CNR_VIEW_CTR=>ONACTIONBUTTON_PRESSED
Web Dynpro Component FPM_GAF_COMPONENT
Controller CNR_VIEW
13 METHOD /1BCWDY/Z3TZZFT9CG847SKLEJYU==CP /1BCWDY/B_Z3TZZFT9CG847SKLEK56 382
CLF_CNR_VIEW_CTR=>IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER
Web Dynpro Component FPM_GAF_COMPONENT
Controller CNR_VIEW
12 METHOD CL_WDR_DELEGATING_VIEW========CP CL_WDR_DELEGATING_VIEW========CM006 6
CL_WDR_DELEGATING_VIEW=>INVOKE_EVENTHANDLER
11 METHOD CL_WDR_ACTION=================CP CL_WDR_ACTION=================CM00A 38
CL_WDR_ACTION=>IF_WDR_ACTION~FIRE
10 METHOD CL_WDR_WINDOW_PHASE_MODEL=====CP CL_WDR_WINDOW_PHASE_MODEL=====CM00U 95
CL_WDR_WINDOW_PHASE_MODEL=>DO_HANDLE_ACTION_EVENTS
9 METHOD CL_WDR_WINDOW_PHASE_MODEL=====CP CL_WDR_WINDOW_PHASE_MODEL=====CM002 82
CL_WDR_WINDOW_PHASE_MODEL=>PROCESS_REQUEST
8 METHOD CL_WDR_WINDOW=================CP CL_WDR_WINDOW=================CM00V 12
CL_WDR_WINDOW=>PROCESS_REQUEST
7 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00I 76
CL_WDR_MAIN_TASK=>EXECUTE
6 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00U 6
CL_WDR_MAIN_TASK=>IF_WDR_RUNTIME~EXECUTE
5 METHOD CL_WDR_CLIENT_ABSTRACT_HTTP===CP CL_WDR_CLIENT_ABSTRACT_HTTP===CM01C 100
CL_WDR_CLIENT_ABSTRACT_HTTP=>HANDLE_REQUEST
4 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00J 95
CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
3 METHOD CL_HTTP_SERVER================CP CL_HTTP_SERVER================CM01B 388
CL_HTTP_SERVER=>EXECUTE_REQUEST_FROM_MEMORY
2 FUNCTION SAPLHTTP_RUNTIME LHTTP_RUNTIMEU02 1155
HTTP_DISPATCH_REQUEST
1 MODULE (PBO) SAPMHTTP SAPMHTTP 13
%_HTTP_START
Thanks,
Jagat -
Blank screens while loading .swf videos
I have several .swf movies on a website I am designing. The
smaller movies load fairly quickly but the larger movies just pop
up a white screen until the movie loads and it can take up to 7
seconds. I would like something like a bar or an animated
"Loading..." to pop up until the movie loads. Anyone have any ideas
on the best way to go about this? Thanks!I have the exact same question. I have a keynote presentation
which I have converted to an .swf file and want something to appear
on the screen while it is loading. It doesn't even need to be
animated - even ome text would do. Help please!!! -
Blank screen while making calls
hi! im getting blank screen when im making a call,i have checked if its a problem with the proximity sensor but its not.
the screen just goes blank when i hit the call button and i can do nothing for example to end the call or etc.. all i can do to get the screen activated is by pressing the power button but by the time the call is disconnected..hmm ..anyone with the same problem????This really bad if you can't put the iPhone 3G in a case. What was Apple thinking? They need to explain what the impact is that these sensors have on use of the iPhone so that users can actually use the device to make a phone call.
-
Apple iPhone 3GS 8GB Blank Screen While Updating to IOS4.3.3
Hi have iPhone 3GS 8GB. This phone I got as replacement from Apple for my Previous iPhone which got stuck in recovery. This replacement phone was working on IOS 4.2.1.
A few days back Apple has released IOS 4.3.3 and while updating my iPhone via iTunes, there was some error message.
I tried it again and different different errors keep on coming. Now my Phone is totally blank. When I plug the Phone in Computer I can listen to USB Plugin sound coming from computer but nothing is coming on screen. It seems iPhone is stuck in DFU Mode.
Also when I plug the phone in computer iTunes POPs up and says phone is in recovery mode and when I restore the phone error 1600 keeps on coming.
I am 100% sure there is some software issues with the phone as computer responds when I plug in and Plug out the phone (USB Sound). Can any wise person on this Group help me out with the same.
Regards,
Anshumanare you able to see the apps on the home screen? If so, it's most likely an issue with your carrier
This is also an issue that can appear on devices that have been modified in an unauthorized manner (not judging, just saying) -
Hello!
I just installed Adobe Premiere Elements 9, which I bought from my campus computer store. My installation seemed to go well, and the organizer operates just fine, however, when I open APE, it asks me if I want to start a new project (to which I say yes), and then promptly gives me nothing but a blank, gray, screen with the menu bar at the top. All icons except those in the help section and new project, exit are greyed out. If I try to start a new project from File->New, I get a dialogue box that says "Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project."
I'm not very good with computers at all, so if I'm missing drivers and such, I would have no idea. However, I have been using a trial copy of Sony Vegas Pro 10, and everything is working just fine on that.
My operating system is: Dell, Inspiron 560S, Processor: Pentium(R) Dual-Core CPU E5700 @3.00 GHz 3.00 GHz, with 3.00 GB RAM, 64-bit.
Thank you all for your time!
-HelenaFirst, work though the tips in this ARTICLE, and if they do not work, see the links in the article.
Good luck,
Hunt
Maybe you are looking for
-
We are developing a new application using Oracle 10g R2. This is a hybrid warehouse/on-line system. Some users will need access to current information (less than 24 hours old) while others will need to access data up to 12 months old. The system will
-
when I'm trying to open up a document or something it says something like "There is no default application specified to open the document (name of document)" . How do you set a default application and what should I set it to? I have an iMac version 1
-
Downloaded Configurator 4. Go to Help > Documentation and the link is broken. If anyone has a manual for 4 and can post it, that would be immensely appreciated.
-
I recently purchased a MacBook and wanted to know how I can get access to VPN? I assumed it was already installed, or do I have to get access from my IT dept? Any help would be appreciated, thanks. Mercedes
-
HttpClusterServlet defaultServer List
I'm trying to use HttpClusterServlet to access a serlet deployed in a 2-wls cluster.Instead of doing this on the proxy server, as indicated in WLS document (and everything works)weblogic.httpd.register.someservlet=weblogic.servlet.internal.HttpCluste