Blank scrren after going to sleep

When making a phone call the screen seems to go to sleep. When it is time to hang up the screen is black and it takes 5-10 second for the screen to come back on. The last time it happened it I had to turn the phone off then back on. This also happened while checking messages. Any solutions?

Well, sounds fairly normal or typical behavior for the iPhone. The display is designed to go sleep when not in direct use, ie being touched; the interval for going to sleep is adjustable in Settings. And during a phone call, say with the phone up to your ear, there is no touch upon the screen, so it goes to sleep. It does take a few seconds, though it seems to me it's only like 2-3 secs, for the screen to re-appear so one can click the End Call button. Ditto for checking messages or email, particularly if the email is updating and there is no touch on the screen.

Similar Messages

Power Mac G4 loses internet connection after going to sleep

Run down of computer: I have a Power Mac G4 tower, PANTHER OSX. I have wireless internet through our cable company—I use a wireless router. When I am connected to the internet, and browsing the web or something, if I let the computer go to sleep, it loses connection. I have to go back up to the little signal icon and reconnect to my wireless network.
I suspected it might be a setting through the router, but when my computer was comletely unplugged, and absent from the apartment, the other computer (G5 imac–TIGER) which was having the same problem, suddenly was staying connected even after going to sleep. When my computer came back home and was hooked back up, suddenly the other computer had the same problem again. So, I concluded that my G4 tower was the culprit, and perhaps not the router. We share a wirless network, so it's not surprising that this is the case.
I know there must be a setting somewhere in preferences or something that is telling the computer to disconnect from network when computer sleeps. I have looked everywhere, and can not figure it out.
It's really annoying to have to reconnect each time I use my computer. And just to reiterate, I get internet through a cable modem using my airport card, so please answer the question with this in mind as settings are totally different from dial-up. I do not use PPP.
Anyone experience this problem? Or know how to help?
Power Mac G4 Tower Mac OS X (10.3.4)
Power Mac G4 Tower Mac OS X (10.3.4)

Tried that too! Notta.
This one's really a pickle! Even the Mac specialist at my office was baffled! He suggested shortening the name of my computer...(Jamie Cendroski's computer)...I didn't really understand how this had anything to do with it...but he's supposed to be the expert. He also suggested trashing my keychains and making new ones. I messed around with them, but I don't know enough about this stuff to be bold enough to trash them yet. I'll do a little more research before I do so. I think he might be onto something with the keychains though..?

My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad

My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.

Same issue here too. I will try reinstalling the firmware update. This has happend to me twice. The only way to correct the issue was to reboot.
Thanks!

My new Mac Air continues to disconnect from WiFi after going to sleep. When waking it up I have to manually re-connect. How do I keep it connected?

My new Mac Air continues to disconnect from WiFi after going to sleep. When waking it up I have to manually re-connect. How do I keep it connected?

I had this problem too and solved it by doing a clean install. After that it was gone.
This is a drastic method since it takes quite some time to reinstall lion and all your software.
Thoughts I had why it started working after a clean install are the following:
It looked like the airport wasn't able to reconnect fast enough before the connection timed out. So what could have prevented my mac from being able to connect fast enough?
Apps that consume processor cycles. I love what I would call 'System Enhancers', little apps that enhance my workflow (Moom, Alfred, Dropbox, Default Folder etc). I'm not saying that these are the problem, they might be programmed processor friendly, but check if you have apps that consume processor cylcles. It might prevent airport from being able to reconnect quickly enough before it times out.
Mobile Config profiles. Another thought I had was that I had a mobile config 802.1X profile installed for the company were I worked. It used TTLS to connect to the corporate network. This profile might have gotten in the way.
And a sidenote...
Routers with hardware acceleration might also be a problem. My router is a Wireless Gigabit Router 300N WL-351 and has hardware acceleration. As soon as I activate that my wifi connection keeps dropping. It is as if a Macbook Air can't handle that amount of optimisation.
That's it, hope it helps those who are still having the problem.
Best, Jan

Mac won't re-start after going to sleep

Since installing a new version of FaxstfPro (version 10.7), my MAC won't re-start after going to sleep. I have to re-boot to get the system started again.
Thanks for any ideas on how to re-store the sleep fucntion.

Thanks for the excellent tip. From reading the bluetooth advisories, I realized that my D-link was incorrectly installed in a UBS hub. Moving it to a direct UBS port resolved the problem.
During the trouble shooting process, I found that I do not have a Bluetooth setup assistant. I have recently installed OS X 10.4.6 and also applied the Bluetooth firmware update, but I can not find the Bluetooth setup assistant in Utilites, and a search via Finder didn't locate it either. And I can't find the software in the .Mac downloads.
Any suggestions on how to restore the assistant?

T400 does NOT wake up after going to sleep

T400 does not wake up after going into sleep. It goes to sleep ok but everytime wheni try to wake it, it restart the whole system instead of waking up.
I have checked the BIOS Security setting and it already set on Active. All drivers are upto date.
Please help!!
Message Edited by farooqjilani on 03-09-2009 08:23 AM

I have a similar issue with a T400 (xp sp2).
suddenly, it won´t come back from sleep. i have to press & hold the power button to turn off the computer, and then press again to turn it on from scratch.

HP Envy shutting down after going into sleep mode

Hi. I'm not sure where to post this so I'll try it here.
My laptop shut downs automatically when it goes into sleep mode. Not right away when going into sleep mode. Maybe like an hour later after going into sleep mode.
I'm not sure it's overheating because it never shuts down while I'm actually using the laptop.
Do you guy have any idea how to fix this?
Product name and number: HP ENVY TouchSmart Sleekbook 4-1115dx
Operating System: Window 8
Error Message: None
Any changes to your system before problem occurred: No

Hey Tecmo_SB_Guy,
I would suggest you take a look at advanced power settings. It can seem like the notebook is turning off when it is actually just hibernating. You can set it to not hibernate.
1. Windows key + Q to open the Search Bar
2. Type "power"
3. Click Settings under the Search Bar
4. Select Power Options from the results on the left.
5. In Power Options, Click Change when the computer sleeps, on the left.
6. Set the Put the computer to sleep setting so that it fits your usage best.
7. Click Change advanced power settings, at the bottom.
8. Expand Sleep and expand Hibernate after. If you want you can change the hibernation setting to Never by typing "Never" into the minutes field. See attached picture. You can do this for battery and/or plugged in.
9. Click Apply to save changes.
If you don't already shut it down periodically, I would suggest shutting it down at least 2-3 times a week if you use it daily. Leaving the computer running continuously can shorten its lifespan. Hard drive failures and motherboard issues are seen much more often on machines that are left running constantly. Computers get bogged down and run slowly when the memory is full. Memory only clears out and resets itself when the computer is shut down. Here is a link explaining more about memory accumulation and hardware aging.
I hope these suggestions help! Please let me know if you have any questions
Attachments:
PowerHibernateNever.jpg ‏59 KB

ThinkPad T420i won't wake up after going to sleep.

My T420i won't wake up after going to sleep (using Fn F4 or close the laptop or time out). The computer was wiped clean and reinstalled with only Windows 7 professional and some Levono softwares. BIOS, windows and all drivers are up to date. The only way to get it back is hold the power button to reboot it. When it reboots, i get improperly windows shut down error.

I'd guess it's ACPI related issue. Check out ACPI driver and correspondent items in Control panel.
Energy report might be helpful too ("powercfg -energy" command within console window with administrator rights)
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

HP PHOTOSMART ALL-IN-ONE 5510 WONT PRINT AFTER GOING TO SLEEP MODE

My printer model:
HP PHOTOSMART ALL-IN-ONE 5510 B111A
Problem:
Printer goes to sleep mode. After 25-30 minutes the wireless connection between the PC and the printer breaks. Blue Wireless light is on even at the sleep mode and I can see that the printer is connected to my router and there is internet connection. HP Print and Scan Doctor sees the printer but I cannot awake the printer unless I restart it.
What I have tried so far:
I have tried all the solutions hp.com offered including; reinstalling driver, updating printer software, setting static IP to printer, setting static DNS servers, using HP Print and Scan Doctor.
I have seen people asked about this question before and there was no solution. I really need HP help!
This question was solved.
View Solution.

Let’s try this. Verify in the printer that 'Auto Off' is disabled. Set a static IP in the printer outside the DHCP range of the router. Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest. Set router to 20Mhz only, or 145Mbps depending on router. Always use WPA2-AES encryption. Power off both. Power on router wait 3 mins. Power on printer and verify it reconnects to router. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Wifi drops after going to sleep

I am running Snow Leopard 10.7.5 and eveytime my mac goes to sleep it drops wifi and will not reconnect, the wifi bars shows full and connected but the internet will not work. help! thank you.

From finder screen, shift, command,U. To get to finder screen if you have something open, click on a blank part of the screen (your desktop background, it should say Finder on the top left on the menu bar, just right of the Apple logo.

Display doesn't wake up after going to sleep

On rare occassion, but often enough to be a hassle, my 20" apple display will stay black after I move the mouse or hit the keyboard after the computer has gone to sleep. My only solution is to hold the power button in for 5 second and force a restart. Why does this happen and what can I do to stop it?
Thanks!
Norm

If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following line:
reset-nvram
press the return key on your keyboard
set-defaults
press return
reset-all
press return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still did'nt work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE

What do I do if an iPod shuts down after going into sleep mode

My friends iPod keeps shutting down after it goes into sleep mode. I just fixed it up (restored it, had to dry it out after it fell into water) and now it does that. Everything else works fine but if I put it in sleep mode or put it into sleep mode it shuts down. How do I fix this because I've never seen this happen before.

Hey Tecmo_SB_Guy,
I would suggest you take a look at advanced power settings. It can seem like the notebook is turning off when it is actually just hibernating. You can set it to not hibernate.
1. Windows key + Q to open the Search Bar
2. Type "power"
3. Click Settings under the Search Bar
4. Select Power Options from the results on the left.
5. In Power Options, Click Change when the computer sleeps, on the left.
6. Set the Put the computer to sleep setting so that it fits your usage best.
7. Click Change advanced power settings, at the bottom.
8. Expand Sleep and expand Hibernate after. If you want you can change the hibernation setting to Never by typing "Never" into the minutes field. See attached picture. You can do this for battery and/or plugged in.
9. Click Apply to save changes.
If you don't already shut it down periodically, I would suggest shutting it down at least 2-3 times a week if you use it daily. Leaving the computer running continuously can shorten its lifespan. Hard drive failures and motherboard issues are seen much more often on machines that are left running constantly. Computers get bogged down and run slowly when the memory is full. Memory only clears out and resets itself when the computer is shut down. Here is a link explaining more about memory accumulation and hardware aging.
I hope these suggestions help! Please let me know if you have any questions
Attachments:
PowerHibernateNever.jpg ‏59 KB

Internet gives after going to sleep

My Powerbook has been acting strange. Lately, whenever the computer goes to sleep for a long period of time, for example, when I let it go to sleep at night, and when I wake up to use the computer, the internet isn't working.
It only seems to happen after the computer is asleep for a while. All I have to do is restart the computer and the internet is working fine. The internet is working for everyone else (I am at school) and nothing is changing.. the probably only occurs after the laptop has been asleep for a while. Safari says my computer is not connected to the internet at all, but like I said, as soon as I restart, the internet works.
Any suggestions?
Mac OS X (10.4.3)

I've had this same problem, though with mine, whenever there's a hiccup with the internet signal, currently through a wireless cable modem, the PB loses its external IP, thus it can no longer access the web. With the cable modem, the external IP is static, thus is always the same. Still, I have to restart the PB to regain connectivity. The PCs on this same network do not have this problem!!
Isn't there some way of reinitializing the network without doing a full restart?
Thanks.

My iMac won t wake up after going to sleep

Ok, here s my problem. When the computer goes to sleep, later I press a key, the monitor stays black, the fans spin up a bit, and then I have to pull the power plug cause nothing can wake it up...
what to do?

I'd like to post a reply in this forum because I've had a similar issue and I'd like to see what could come of a little discussion. This iMac is 2 weeks old, I purchased a 1 GB RAM chip (from Omni Technologies through Ramseeker.com) to upgrade from 512 stock. The RAM installed with no problems and I have to say; this is the easiest upgrade I have ever made, Apple's design for opening the computer is truly supreme.
So I read about 128bit vs 64bit data paths and got greedy for power realizing that my RAM was not matched. So I contacted Omni and ordered 2 matched 1GB chips and planned to return the 1GB chip I had previously purchased. Again, the RAM installed with no problems, but this time my computer would not wake from sleep no matter what. Exactly as Tomi K. describes; blinking light goes off, fan spins up, but the screen stays blank. Hardware tests and applications work fine, but the computer will not wake from sleep. I have been all over these discussions, resetting, unplugging, and trying different combinations of RAM etc. The only thing that works is the original combination of 1.5GB of RAM, which completely solves the problem. I'm baffled and I am curious... could this sleep issue really be related to the RAM even though everything else works and tests fine? Should I try to get another kit of RAM and see if that works? Any feedback would be appreciated.

Mac os x unexpectedly quit after going to sleep

Running Mac OS X 10.5.8, the main software changes have been installing new software for a Netgear Wireless Router, and deleting two programs, Cisco Clean Access Client for a network I no longer will use, and the MotoCast app for the Android phone.
The following is the error message I recieved:
Interval Since Last Panic Report: 749 sec
Panics Since Last Report:          1
Anonymous UUID:                    07793E90-A7A9-4029-B187-ACEB4CFAEEC4
Mon Jun 3 22:44:33 2013
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x0010215e, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0xbf180000, CR3: 0x01177000, CR4: 0x00000660
EAX: 0xbf180000, EBX: 0x00000003, ECX: 0x00000001, EDX: 0x00000000
CR2: 0xbf180000, EBP: 0x2e613928, ESI: 0x00040a80, EDI: 0x23f6500c
EFL: 0x00010803, EIP: 0x0010215e, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000002
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x2e613738 : 0x12b4c6 (0x45f91c 0x2e61376c 0x13355c 0x0)
0x2e613788 : 0x1ab0fe (0x469a98 0x10215e 0xe 0x469248)
0x2e613868 : 0x1a1713 (0x2e613880 0x2e61388c 0x2e613928 0x10215e)
0x2e613878 : 0x10215e (0xe 0x48 0x10 0x10)
0x2e613928 : 0x144d66 (0x23f65000 0x1 0x40a80 0x0)
0x2e6139d8 : 0x408b49 (0x23f65000 0x23f75000 0x2e613d04 0x409f7d)
0x2e613d28 : 0x1b31bc (0x4f9120 0x2e613d48 0x2e613d78 0xcdd922)
0x2e613d48 : 0x1b40e7 (0x2e613d98 0x2 0x0 0x2e613d78)
0x2e613d78 : 0x1b3308 (0x1b318b 0x2e613d98 0x2e613da8 0x3f36a7)
0x2e613da8 : 0x86cffe (0x86ce50 0x3 0x246 0x131e9a)
0x2e613dc8 : 0x86144c (0x3e54800 0x2 0x0 0x3ef2780)
0x2e613de8 : 0x43a8a9 (0x3ef2900 0x53d848 0xffffffff 0x0)
0x2e613e38 : 0x44cb7f (0x3e54800 0x4a78d4 0x2e613e68 0x461a540)
0x2e613e88 : 0x41acd1 (0x3ecbb00 0x4 0x1d 0x2)
0x2e613ec8 : 0x41ad93 (0x3ecbb00 0x0 0x1 0x3e68780)
0x2e613ee8 : 0x42174c (0x3ecbb00 0x461d6c0 0x0 0x0)
          Backtrace continues...
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.driver.AppleACPIPlatform(1.2.5)@0x860000->0x89dfff
            dependency: com.apple.iokit.IOPCIFamily(2.6)@0x59d000
            dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5ae000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9L30
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: MacBook4,1 (Mac-F22788A9)
System uptime in nanoseconds: 805305974484
unloaded kexts:
com.apple.driver.InternalModemSupport          2.4.0 - last unloaded 237674615204
loaded kexts:
com.Cvnt.driver.CvntDriver          1.5
com.Cvnt.nke          2.0
com.apple.driver.InternalModemSupport          2.4.0 - last loaded 24079609804
com.apple.iokit.IOBluetoothSerialManager          2.1.9f10
com.apple.filesystems.autofs          2.0.2
com.apple.driver.AppleHDAPlatformDriver          1.7.1a2
com.apple.driver.AppleHWSensor          1.9d0
com.apple.driver.AppleHDAHardwareConfigDriver          1.7.1a2
com.apple.driver.AppleHDA          1.7.1a2
com.apple.driver.AppleUpstreamUserClient          2.7.5
com.apple.Dont_Steal_Mac_OS_X          6.0.3
com.apple.driver.SMCMotionSensor          2.1.1d2
com.apple.driver.AppleIntelGMAX3100          5.4.8
com.apple.driver.AppleGraphicsControl          2.8.15
com.apple.driver.AppleIntelGMAX3100FB          5.4.8
com.apple.driver.AppleHDAController          1.7.1a2
com.apple.driver.AppleIRController          113
com.apple.iokit.IOFireWireIP          1.7.7
com.apple.driver.ACPI_SMC_PlatformPlugin          3.4.0a17
com.apple.driver.AppleLPC          1.3.1
com.apple.driver.AppleBacklight          1.6.0
com.apple.driver.AppleTyMCEDriver          1.0.0d28
com.apple.driver.AudioIPCDriver          1.0.6
com.apple.driver.CSRUSBBluetoothHCIController          2.1.9f10
com.apple.driver.AppleUSBMergeNub          3.5.2
com.apple.driver.AppleUSBTrackpad          1.7.4f1
com.apple.driver.AppleUSBTCKeyEventDriver          1.7.4f1
com.apple.driver.AppleUSBTCKeyboard          1.7.4f1
com.apple.driver.CSRHIDTransitionDriver          2.1.9f10
com.apple.driver.USBCameraFirmwareLoader          1.0.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.1.1
com.apple.iokit.SCSITaskUserClient          2.1.1
com.apple.driver.XsanFilter          2.7.91
com.apple.iokit.IOATAPIProtocolTransport          1.5.3
com.apple.driver.AppleIntelPIIXATA          2.0.1
com.apple.driver.AppleFileSystemDriver          1.1.0
com.apple.driver.AppleFWOHCI          3.9.7
com.apple.driver.AppleUSBHub          3.4.9
com.apple.iokit.IOUSBUserClient          3.5.2
com.apple.driver.AppleEFINVRAM          1.2.0
com.apple.iokit.IOAHCIBlockStorage          1.2.2
com.apple.driver.AirPortBrcm43xx          367.91.22
com.apple.driver.AppleAHCIPort          1.7.0
com.apple.driver.AppleUSBEHCI          3.4.6
com.apple.iokit.AppleYukon2          3.1.13b2
com.apple.driver.AppleUSBUHCI          3.5.2
com.apple.driver.AppleSmartBatteryManager          158.10.5
com.apple.driver.AppleRTC          1.2.3
com.apple.driver.AppleHPET          1.4
com.apple.driver.AppleACPIPCI          1.2.5
com.apple.driver.AppleACPIButtons          1.2.5
com.apple.driver.AppleSMBIOS          1.4
com.apple.driver.AppleACPIEC          1.2.5
com.apple.driver.AppleAPIC          1.4
com.apple.security.seatbelt          107.12
com.apple.nke.applicationfirewall          1.8.77
com.apple.security.TMSafetyNet          3
com.apple.driver.AppleIntelCPUPowerManagement          76.2.0
com.apple.driver.DiskImages          199
com.apple.BootCache          30.4
com.apple.iokit.IOSerialFamily          9.4
com.apple.driver.DspFuncLib          1.7.1a2
com.apple.iokit.IOHDAFamily          1.7.1a2
com.apple.driver.IOPlatformPluginFamily          3.4.0a17
com.apple.driver.AppleSMC          2.3.1d1
com.apple.iokit.IONDRVSupport          1.7.3
com.apple.iokit.IOGraphicsFamily          1.7.3
com.apple.iokit.IOAudioFamily          1.6.9fc5
com.apple.kext.OSvKernDSPLib          1.1
com.apple.driver.AppleUSBBluetoothHCIController          2.1.9f10
com.apple.iokit.IOBluetoothFamily          2.1.9f10
com.apple.iokit.IOUSBHIDDriver          3.4.6
com.apple.driver.AppleUSBComposite          3.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice          2.1.1
com.apple.iokit.IOBDStorageFamily          1.5
com.apple.iokit.IODVDStorageFamily          1.5
com.apple.iokit.IOCDStorageFamily          1.5
com.apple.iokit.IOSCSIArchitectureModelFamily          2.1.1
com.apple.iokit.IOATAFamily          2.0.1
com.apple.iokit.IOFireWireFamily          3.4.9
com.apple.iokit.IO80211Family          216.1
com.apple.iokit.IOAHCIFamily          1.5.0
com.apple.iokit.IONetworkingFamily          1.6.1
com.apple.iokit.IOUSBFamily          3.5.2
com.apple.driver.AppleEFIRuntime          1.2.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.iokit.IOStorageFamily          1.5.6
com.apple.iokit.IOHIDFamily          1.5.5
com.apple.driver.AppleACPIPlatform          1.2.5
com.apple.iokit.IOACPIFamily          1.2.0
com.apple.iokit.IOPCIFamily          2.6
Any help I could get would be greatly appreciated!

Hello again. I uninstalled Covenant Eyes thinking that would solve the problem, and was having varying luck with getting the computer to wake up from sleeping, but now it is crashing again when trying to wake from sleep. The wake it has the most trouble with is when it goes to sleep due to being idle, and less so from putting it to sleep or closing the lid. The following is the report I got:
Interval Since Last Panic Report: 27632 sec
Panics Since Last Report:          4
Anonymous UUID:                    07793E90-A7A9-4029-B187-ACEB4CFAEEC4
Sun Jun 9 00:38:54 2013
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x00101e8d, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00018000, CR3: 0x00d1b000, CR4: 0x00000660
EAX: 0x00052901, EBX: 0x00018000, ECX: 0x000529c9, EDX: 0x2ee50d41
CR2: 0x00018000, EBP: 0x341cf9fc, ESI: 0x2eea370a, EDI: 0x00000318
EFL: 0x00010016, EIP: 0x00101e8d, CS: 0x00000008, DS: 0x03e30010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x341cf818 : 0x12b4c6 (0x45f91c 0x341cf84c 0x13355c 0x0)
0x341cf868 : 0x1ab0fe (0x469a98 0x101e8d 0xe 0x469248)
0x341cf948 : 0x1a1713 (0x341cf960 0x454fa 0x341cf9fc 0x101e8d)
0x341cf958 : 0x101e8d (0xe 0x530048 0x341c0010 0x34e50010)
0x341cf9fc : 0x100000 (0x1000 0x341b8a0c 0x409f7d 0x163ed74)
Backtrace terminated-invalid frame pointer 0x408d7b
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9L30
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: MacBook4,1 (Mac-F22788A9)
System uptime in nanoseconds: 6281334655909
unloaded kexts:
com.apple.driver.AppleHDAPlatformDriver          1.7.1a2 - last unloaded 98541992247
loaded kexts:
com.apple.driver.AppleHDAPlatformDriver          1.7.1a2 - last loaded 26639293370
com.apple.driver.InternalModemSupport          2.4.0
com.apple.filesystems.autofs          2.0.2
com.apple.iokit.IOBluetoothSerialManager          2.1.9f10
com.apple.driver.AppleHDAHardwareConfigDriver          1.7.1a2
com.apple.driver.AppleHWSensor          1.9d0
com.apple.driver.AppleUpstreamUserClient          2.7.5
com.apple.driver.DiskImages          199
com.apple.driver.AppleHDA          1.7.1a2
com.apple.driver.AppleGraphicsControl          2.8.15
com.apple.driver.AppleIntelGMAX3100          5.4.8
com.apple.Dont_Steal_Mac_OS_X          6.0.3
com.apple.driver.AppleIntelGMAX3100FB          5.4.8
com.apple.driver.ACPI_SMC_PlatformPlugin          3.4.0a17
com.apple.iokit.AppleYukon2          3.1.13b2
com.apple.driver.AirPortBrcm43xx          367.91.22
com.apple.driver.AppleHDAController          1.7.1a2
com.apple.driver.AppleIRController          113
com.apple.driver.SMCMotionSensor          2.1.1d2
com.apple.iokit.IOFireWireIP          1.7.7
com.apple.driver.AppleLPC          1.3.1
com.apple.driver.AppleBacklight          1.6.0
com.apple.driver.AppleTyMCEDriver          1.0.0d28
com.apple.driver.AudioIPCDriver          1.0.6
com.apple.driver.CSRUSBBluetoothHCIController          2.1.9f10
com.apple.driver.AppleUSBTrackpad          1.7.4f1
com.apple.driver.AppleUSBTCKeyEventDriver          1.7.4f1
com.apple.driver.AppleUSBTCKeyboard          1.7.4f1
com.apple.driver.CSRHIDTransitionDriver          2.1.9f10
com.apple.driver.AppleUSBMergeNub          3.5.2
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.1.1
com.apple.iokit.SCSITaskUserClient          2.1.1
com.apple.driver.XsanFilter          2.7.91
com.apple.iokit.IOAHCIBlockStorage          1.2.2
com.apple.iokit.IOATAPIProtocolTransport          1.5.3
com.apple.driver.AppleUSBHub          3.4.9
com.apple.driver.AppleFileSystemDriver          1.1.0
com.apple.iokit.IOUSBUserClient          3.5.2
com.apple.driver.AppleFWOHCI          3.9.7
com.apple.driver.AppleAHCIPort          1.7.0
com.apple.driver.AppleIntelPIIXATA          2.0.1
com.apple.driver.AppleEFINVRAM          1.2.0
com.apple.driver.AppleUSBEHCI          3.4.6
com.apple.driver.AppleUSBUHCI          3.5.2
com.apple.driver.AppleRTC          1.2.3
com.apple.driver.AppleHPET          1.4
com.apple.driver.AppleSmartBatteryManager          158.10.5
com.apple.driver.AppleACPIPCI          1.2.5
com.apple.driver.AppleACPIButtons          1.2.5
com.apple.driver.AppleSMBIOS          1.4
com.apple.driver.AppleACPIEC          1.2.5
com.apple.driver.AppleAPIC          1.4
com.apple.security.seatbelt          107.12
com.apple.nke.applicationfirewall          1.8.77
com.apple.security.TMSafetyNet          3
com.apple.driver.AppleIntelCPUPowerManagement          76.2.0
com.apple.BootCache          30.4
com.apple.iokit.IOSerialFamily          9.4
com.apple.driver.DspFuncLib          1.7.1a2
com.apple.driver.IOPlatformPluginFamily          3.4.0a17
com.apple.iokit.IO80211Family          216.1
com.apple.iokit.IOHDAFamily          1.7.1a2
com.apple.iokit.IONetworkingFamily          1.6.1
com.apple.driver.AppleSMC          2.3.1d1
com.apple.iokit.IONDRVSupport          1.7.3
com.apple.iokit.IOGraphicsFamily          1.7.3
com.apple.iokit.IOAudioFamily          1.6.9fc5
com.apple.kext.OSvKernDSPLib          1.1
com.apple.driver.AppleUSBBluetoothHCIController          2.1.9f10
com.apple.iokit.IOBluetoothFamily          2.1.9f10
com.apple.iokit.IOUSBHIDDriver          3.4.6
com.apple.driver.AppleUSBComposite          3.2.0
com.apple.iokit.IOBDStorageFamily          1.5
com.apple.iokit.IOSCSIBlockCommandsDevice          2.1.1
com.apple.iokit.IODVDStorageFamily          1.5
com.apple.iokit.IOCDStorageFamily          1.5
com.apple.iokit.IOSCSIArchitectureModelFamily          2.1.1
com.apple.iokit.IOStorageFamily          1.5.6
com.apple.iokit.IOFireWireFamily          3.4.9
com.apple.iokit.IOAHCIFamily          1.5.0
com.apple.iokit.IOATAFamily          2.0.1
com.apple.iokit.IOUSBFamily          3.5.2
com.apple.driver.AppleEFIRuntime          1.2.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.iokit.IOHIDFamily          1.5.5
com.apple.driver.AppleACPIPlatform          1.2.5
com.apple.iokit.IOACPIFamily          1.2.0
com.apple.iokit.IOPCIFamily          2.6
Any help would be greatly appreciated!

Blank scrren after going to sleep

Similar Messages

Maybe you are looking for