Blank sections in layers panel

After an update yesterday one of my layers sections turns black when I open new documents. All of the docked windows in the section disappear and the options aren't selectable.

Rather obscure.
Which version of AI? What update? OS? What do you mean by "layer section"? Which options are not selectable?
Show a screenshot and try to explain carefully.

Similar Messages

Photoshop cs4 - changes seen only in small layers panel window

Hello. I am operating from a mac, using Photoshop, CS4. When I make any kind of change or alteration to my image, the change shows up only in the layers panel small display window, not on the actual image. I have the correct layer selected etc.

Is the layer you are editing the topmost in your layers panel? Is it getting obscurred by a layer above it — perhaps even a blank white layer?

"Blank" thumbnails in Layers Palette with white objects.

When working with completely "white" objects, the thumbnail in the layers palette is effectively "blank" (see attached sample). Is there any kind of option or mode that will make those thumbnails a little more practical? I often have to find a specific white letter behind a non-white letter--and sometimes they're nowhere near each other in the layer. (Most often these are 'old' files that someone else created.)

While I can’t help make the Layers panel more informative for you, you might find the Transparency Grid helpful. Turn it on in the View menu, andchange the colours for the grid in Document Setup.

Layers Panel , Photoshop Elements and Windows 7

Anybody got any ideas on how to open the layers panel in photo editor?. When either using "window/layer or F11 all I get is a blank page on the right of the picture, not like the one shown on page 331 on the downloaded manual. I have only recently purchased to program, so I am new to it.

First, you do have an image open when you do this? Assuming yes try using the 'More' button at the very bottom right of the Editor screen and select 'Custom Workspace'. That should bring up the customisable multi-tabbed view. If it does and you like it, keep it. Otherwise click 'More' again and select 'Basic Workspace'. Hopefully this will reset the any display problem you may have. If not use Edit> Preferences> General> Reset Preferences on Next Launch and restart PSE.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

PSE 11 Reversing layers in layers panel

How do I revers the layers order in the layers panel? Somehow mine now works from the bottom up (the background layer is now at the bottom with successive layers above it) instead of the top down. It's messing up my workflow. Just wondering if anyone knew how to change it back.
Thanks!
Ann

Ann,
The background layer should be at the bottom of the stack of layers in the layers palette.
Try this:
Open a picture file--->Background
Open a blank layer (Layer>new>Layer)----Layer1
Open another blank layer--->Layer 2
Open a Hue/Saturation Adjustment layer----->Hue Saturation 1
You should see this:

My photos are not showing up as layers in the layers panel, only as one layer, so I can't make any changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong?

My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.

barba87623950 a écrit:
My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.
Photos from cameras or scans have only one layer (the 'background' layer).
You can start with that 'background' layer and duplicate it or add other layers in the editing process. For instance you can make a selection of a subject and put it on another layer; a common use is to desaturate the 'background' and to keep the color in the selected subject in your newly created layer.

How to suppress a blank section in crystal report

how to suppress a blank section in crystal report. although i have set the property
"suppress blank section "=true ,still i m unable to suppress my section
please help me to cope up this issue.
thanks in advance

One recommendation I make, when troubleshooting suppression issues, is to put a visible border of the section, area or object to be suppressed, and borders for all objects contained in the section or area. This will help isolate what's suppressed, and whether the section is truly blank or has content that's blank.
Furthermore, I recommend indicating which SDK and what version you're using when posting.
Sincerely,
Ted Ueda

Opening a new file in photoshopcc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

opening a new file in photoshop cc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

Graphics card is the problem.
Trying to update drivers now.
Thanks for your help
john

I am unable to add a pattern via the layers panel

Help please! All of the sudden the "add/fill a pattern" via the layers panel on the right hand side is no longer available to me... that option is grayed out and won't let me select. I can still "fill" a pattern from the top menu's pull down menu, but that does not let me change scale, etc.
this is a vital tool to me, and I have no idea why it just stopped working.
Thanks!!!

brendaz
Glad that your issue resolved itself. But, it sounds like your program is Photoshop Elements and not Premiere Elements. Some how your thread got posted in the Premiere Elements Forum (video editing).
If the problem should reoccur, please post your thread in the Photoshop Elements Forum.
Photoshop Elements
Best wishes
ATR

I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen. The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

Layer(s) not showing up on top of background, only in layers panel...

Hello All, Any help here would be great....briefly, PSE worked just great before, I'm on my newer MacBook Air, well within system requirements for PSE. Maverick OS. Started working with PSE and when I tried to "stamp" a brush shape (whether default brushes or otherwise), the program does something it had never done before....SEE ATTACHED. I will create a new layer to use my brush, but when I try to "stamp" it onto background, the program then creates a layer mask where I can see the brush shape AND a new layer, however ALL that shows up on the background is the icon you can see in my screen grab I am attaching here. What is this icon? (The teeny one middle right of image, black square, outlined in red, with two red circles in the middle) I called Apple, we did a few things, they said it wasn't on there end. I reset my tools, I uninstalled, reinstalled, to no avail. Last night, I called Adobe, spent 48 minutes on the phone with a guy only to be told that he wasn't "trained" in how to fix this issue and his superior would call me back within an hour. Never got that phone call, so I'm hoping (praying, begging) someone out there will have an idea of WHAT this icon is, as well as how to fix this issue. Again, I've reset all tools, the "eye" icon on layers panel shows it should be visible, I've tried layers-->merge visible, I've uninstalled and reinstalled, and called adobe newbie who didn't know even what the icon meant. Any takers?!?! See below.....

Because the mask image is the same as the background, the leaves you are painting are essentially the the identical pixels to those underneath. Fill the top layer image with a solid colour and your leaves will show.
You can right-click the little red box to get to a settings dialog.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Can't see layers in layers panel

I can't see any layers in the layers panel, it happens after working for a while, I tried:
-Resetting the workspace
-Switching to a new workspace then switching back.

Unfortunately that didn't help, I minimized it, scaled it, and pulled it off the sidebar but nothing seems to have gotten better. I'll have to save my work and restart the application again

Export to PDF from Autocad: Acrobat always opens PDF with 'layers panel and page' shown.

Hello,
Whenever I export to PDF from Autocad, Adobe Acrobat opens the PDF with the 'Layers Panel and Page' shown.
Each time I have to manually go to 'Properties' and select 'Page only', close 'Properties' and close the PDF and select to save the changes, in order to show the just the page.
Is there a way to make PDFs always export to 'Page only' automatically as default?
Thanks!
Ione

Thakns Peter, I had seen this thread, but it doesn't really address my issue. I've exported individual chapters from the book file, all with success, so I know there isn't a file corruption issue. The problem seems to do more with memory allocation/usage.
I have tried: quitting and then immediately exporting the file, and even rebooting and then relanuching and exporting. Both of these allow me to get a few pages farther along, but still not through the entire book.
I remember back in the day there used to be a setting for how much RAM/dis c space was allocated to a certain applicatino (I knowm it was a long time ago). I didn't know if there might be something like this hidden somewhere

How do I search for a string in the Text tab of the Layers panel

I have a world map with a text layer for country names. I hide the country names as needed by clicking on the 'eye' icon for Toggle Visibility in the Layers panel. I've inadvertently hidden one name and I need to know how to find it in the Text panel so I can make it visible again. How do I seatrch for a name in the Text panel?

Just in case there is an unlocked and visible object close to the hidden one in the stacking order, you may select that object right on the artboard and then go to the Layers palette menu and take the Locate Object command.
Of course, this would be just one possible workaround to locate the hidden objects a bit easier.

How do I delete a blank section of page?

Hi,
I've got a long scrolling page.
I deleted a large section, which is now blank.
There more page content afterwards.
How can I delete a blank section in the middle of my big page?
(Maybe I can highlight the empty section somehow and just delete it like a word processing doc?)
Please help!
Owen L

Hi Aish,
Thanks for the reply.
Clicking didn't give me that box.
When you say drag the content up from the bottom, is the a way I can highlight all the relevenat content?
...Or do I have to hold down shift and highlight everything individually?
Thanks,
Owen

Blank sections in layers panel

Similar Messages

Maybe you are looking for