Blank slide when scroll a web page

hi
when i tried to capture a web page and i scroll down, the programm just creates blank slides. i tried several times in different computers but it always did the same.
what am i doing wrong?
thanks

Since you've raised it as an issue, I guess that you're getting the blank page instead of the scrolled down page, rather than in addition to it? And that you're using automatic recording, not full motion recording?
For some reason your browser is indicating a change when it starts to redraw the content, but not after.
Easy solution: listen out for the camera shutter sounds as Cp takes an automatic capture, and if you're not sure that the screen has fully redrawn itself when you hear the sound, just press the button to manually grab a screen - by default it's PrtScrn.

Similar Messages

Rainbow wheel when scrolling a web page

Strangely every '''second time''' that I want scrolling a web page, the arrow become unresponsive for few second and the rainbow wheel appear sometime for more the 1 mn !
This happen mostly on Google web page.
I clear already firefox cache but it didn't help.
iMac 3.06GHz IC2D OS X 10.6.8 / Firefox 8.0.1

Yes, that's what I did in the first place.
Instead of MOUSE_UP I used KEY_DOWN and the results came both: the stage and the HTMLLoader. That's why I'm confused. I'm pretty sure the results are same if I use MOUSE_UP too, isn't it?
And my question is, where is the focus when scrolling a web page loaded with HTMLLoader WITH ARROW KEYS. Not using a mouse, and I don't know how to scroll with a mouse.

When loading ANY web page, it take firefox 3sec to load a blank page. No matter what website I try to load, it just loads a blank page

When loading ANY web page, it take firefox 3sec to load a blank page. I have tried everything, starting firefox in safe mode and dissabling all add ons, turning 6v on and off, turnig proxy on and off, reinstalling firefox, restarting my computer, and reinstalling drivers. I can use another browser to surf the internet but finding one that is as capable to firefox isn't easy.
ps. Firefox did start at one point and then just stoped.
I use Linux Ubuntu 11.04 single boot

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also:
*http://kb.mozillazine.org/Error_loading_websites

My mid 2010 Mac running yosemite lock has recently started to lock up when I do a swipe on the magic mouse to scroll a web page

My mid 2010 Mac running yosemite has recently started to lock up when I do a swipe on the magic mouse to scroll a web page. Anybody having a similar experience? I believe I've taken the last update to Yosemite within the last several weeks but this behavior did not start in concurrence with any system maintenance events.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
Next, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

PDF files break up when scrolling down the page

Embedded pdf files break up when scrolling down the page i.e.
http://www.wight-cam.co.uk/WightCAM/HTML/2011/110321.htm

Go to the "inspector"-click on the "table" icon-then "headers and footers" where you can set the number of headers or footers you want and click/unclick "freeze". You can also do that directly from the button bar on the "header-footer" buttons

Whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?

Hi
I have a windows 7 and whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?
I hope that was clear.
Thnx

Hello kmanthie,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

When Printing a web page from Firefox. The fonts are timy and all spacing is incorrect.

Prior to beta 4.12, the pages printed correctly. Now, the fonts are small and the text spacing is incorrect. All text has at least one extra space between the letters.
This happens on ALL sites when printing a web page.
I tried printing the same page in Internet Explorer and it prints correctly.

See this thread:
*[/questions/787654]

Turning off headers and footers when printing a web page.

Is it possible to turn off (or reduce the size of) the
default header and footer
when printing a web page? I am using Internet Explorer 6.0.2
900, and only want
it to work with my computer and a specific printer.
I am using the directive @page normal { size : portrait;
margin : 0;} in a CSS
stylesheet specified as media="print".
Clancy

On Sat, 19 Jan 2008, David Powers wrote
>However, you are very selective in your quote. Michael
goes on to say
>(and I agree with him on this point):
>
>"The problem with logical inches and all other fixed
units of measure
>is that they do not scale well on systems with different
dot-per-inch
>settings. What may seem just right in Windows at 96 dpi
may be too
>large or too small on other systems.
Of course, but It's not a problem with logical inches per se.
The
logical inch is just another way of looking at what is meant
by the
screen dpi value. Scaling problems, with different dpi
settings, has
always been a Windows problem and results from the way that
the OS
handles scaling. Fonts scale perfectly. Actual windows, and
other
containers, don't. This is a problem programmers have
grappled with
since the first Windows OS. Vista is the first OS to try to
tackle this
problem.
>Thus, percentages or ems work best when cross-platform
compatibility is
>desired."
And that is because the users screen dpi, and hence logical
inches, are
totally irrelevant when specifying ems and percentages.
Ems and percentage equate to a number of pixels, not inches.
The sole purpose of screen dpi setting is to convert anything
sized in
physical inches into a number of screen pixels. That is the
_only_
purpose of screen dpi. It's a very simple algorithm.
(physical) inches x screen dpi value = number of pixels
How do _you_ think a font sized in points (inches) gets
translated to a
specific number of pixels on screen. I'd be interested in
your answer.
For the screen a conversion from physical inches to pixels is
always
necessary because, as you say, pixels are the unit of screen
measurement
but they are not just a "standard" measurement, they are the
only
consistent measurement. It's not the users program that
creates pixels
on screen but the Operating System. The program requests the
OS to
create a given font at a given size and the requested size
_must_ be in
pixels. Windows can't _directly_ create a screen font that's
specified
in points (inches) because it has no notion of what a
physical inch is
on screen. It does know what a logical inch is because the a
logical
inch is defined by the screen dpi value. That's what the
screen dpi
value is for. If a browser programmer wants to bypass the
variability of
screen dpi on different computers then they ignore dpi values
and work
directly in pixels i.e. in ems or percentage. When ems and
percentages
are specified one is dealing only in pixels.
> It makes a lot more sense in terms of website design to
set a
>font-size of 14px than use units that both you and
Michael Bowers
>define as "1/72 of a logical inch".
Of course it makes more sense to set font size specifically
in pixels
because that's the only unit the OS can use to put something
on screen.
I can't see where you get the idea that either Michael Bowers
or I have
said that there is a unit "defined as 1/72 of a logical
inch". Every
Windows program written takes it that there are 72 points to
a
_physical_ inch.
>
>Yes, you *can* use points to set font sizes (or any other
measurement)
>in CSS for onscreen display, but your fixation with
logical inches
>appears to add little of practical value to choosing the
most
>appropriate measures for designing pages to be viewed on
displays of
>various sizes and resolutions.
You are implying I've said things which I haven't. I have
never, at any
time, said one should use points or inches in designing web
pages. You
seem to have missed the point that what I am doing is
explaining why you
see the results you do on screen when those unit are used.
Somewhat more
informed than "Points are only for print because I don't know
what they
mean on screen, so they must be meaningless".
>As Eric Meyer says on page 110 of "Cascading Style
Sheets: The
>Definitive Guide" (2nd Edition), "points can be a very
difficult
>measurement to use in document design."
And again, I've never advocated using them in page design. A
close
reading, however, from page 83 onwards shows that Eric Meyer
has an
imperfect notion of the meaning of screen dpi. Heresy!! He's
hardly
alone, which is why I did a web site.
>
>That's why I recommend leaving points for use in print
style sheets.
>However, if you enjoy making life difficult for yourself
by using
>points for onscreen design, you're perfectly free to do
so.
Once again, I have never advocated that. You are setting up a
straw man
to knock down. You can do better than that.
Richard Mason
http://www.emdpi.com

When printing a web page, I only get blank pages

I have a new iMac with MAC OS 10.4.11. I connected an HP psc 2175xi all-in-one printer, and when I try to print a web page from Safari, I only get a very small portion of the header and all other pages are blank. When looking at the Print Preview, every thing looks like it has printed fine, but when it is sent to the printer only blank pages come out. I am able to print from other applications fine. It seems to be related to printing web pages only, because I have also tried to print using Firefox, but the same problem occurs. Can anyone please help?
Thanks.

I did not have the HP printer software for Mac OSX installed properly. Once installed the problem went away.

Firefox latest update will not print youtube videos on my websites - just has a blank space in place of video when I print web page?

WinXP - When I preview a web page before printing it - it is blank where my Youtube video should appear - and when I print the web page, Firefox prints a blank space where the video should appear?
How can I fix this?

Can't be done due to the aforementioned Bug that was reported on the Gecko Core back in 2002. Never worked in Firefox which was just beginning initial development under the Phoenix moniker, when that Bug was filed.
'''Content of plugins (flash, java applets) doesn't get rendered for printing or print preview'''
Have you tried "printing" to PDF??

A better way to Scroll through web pages?!?

I read long articles on various news web sites. It's really a pain to have to constantly scroll down the screen using your finger! Is there any solution for this??
When I use the amazon kindle you just click a button to move to the next section of the screen. One hit and you're there! It would be awesome to utlize the physical volume controls on touch to do the same. Is there any app that does this already? (I have not found one).
Or mabye there is a way to add a button at the bottom of the screen that would also jump to the next section of the web page for faster reading.
Any ideas out there
Cheers

You may want to see if one of the News Apps, In the App store provide you with what you need. They have the ability to basically let you scroll however they want it to look with built in buttons or using swipe.
Can not say there is an actual news App that will do this as I have not really tested all them. But maybe another poster out there can post their experience with news apps.
In the mean time feel free to submit feedback to iPhone and if you find a news App you like without the features you want feel free to submit feedback to them as well.
http://www.apple.com/feedback/iphone.html

Blank Spaces, shortening length of web pages?

There is a long blank space below this web page that I can't get rid of:
http://www.thebunting.com/TheBunting_Empire/Random_Linkage/Entries/2008/5/23_Take_on_me_aufdeutsch.html
How might I go about shortening it so that the page ends when the text does?

Nevermind, I figured it out. I had to delete the page and make a new one, but it all looks good now. Thanks.

"Slide show" for a web page

Hi all! I have a client who wants me to make a slide show to go on his web page. Up until now, I've been creating animated gifs. But now he wants the slides to fade or dissolve in to one another. I can do this in iMovie. But... the slide show has to be a specific size. I'm not sure in iMovie how to make a specifically sized movie. Plus, I'm not sure of the best way to save it. SWF? I've posted on the iMovie forum, but didn't get any helpful responses. I've looked online for help, but apparently I'm not using the right search criteria. All I find are instructions on making movies to run off of a computer.... not on a web page.
Oh... it also needs to loop continuously. Is this a setting I set in Dreamweaver? Animated gifs are set to loop when I create them in Photoshop. But I couldn't figure out how to do this in iMovie.
Thank you!
Julie

LMGTFY: http://www.google.com/search?q=jquery+slideshow
Mylenium

When I save web page on my HDD then when I try to open it the pictures are not displayed?

I have saved on my hdd webpage and folder with all pictures, but when I try to open it by doubleclick it open onli web page with text but picture stay clear (only borders)

Hi bikicviki,
Thank you for your question. I do not believe that the proper links have been updated to reference the newly saved file path of the local webpage that you saved.
Can you please check the webpage content that was saved to see if there is an image stored in a folder? They should be. If not, can you please provide an example webpage and I will try it? I tried this webpage and did not have any missing images.
Looking forward to your reply!

Blank slide when scroll a web page

Similar Messages

Maybe you are looking for