Blank space between text boxes after publishing

I have a few pages with a relatively large number of text boxes on them (perhaps 20). These are all separated by a few pixels in iWeb, but when I publish to .mac, I see quite a bit of space between them. Is this a known problem? Is there a fix?
Thanks,
Patrick

Go into iWeb and check that your text boxes are not overlapping each other. If they are, this can cause problems when publishing. Check that they do not overlap and re-publish and see what happens then.

Similar Messages

  • Equalizing spaces between text boxes

    I have a presentation in which I have a few text boxes in a row/column format.  Each line of text is a single group, composed of two individual text boxes.  Is it possible to equalize the space between these line of text, and if so, how, instead of "eyeballing it" by clicking on the boxes and seeing if the borders are the same distance from each other?

    Go to your Keynote Preferences and under the Rulers Tab check the box that says Show relative spacing.

  • Reg: Adding spaces between texts in ALV list header

    Hi All,
    I was implementing a client requirement for ALV. The list header should contain something of this format.
    Pgm Id:               ZZZ01
    After this list header it is ALV display.
    I did this using the concatenate statement.
    ex: Concatenate 'PgmID' sy-repid into listheader seperated by space.
    But this is not showing spaces between text in ALV display. See I want a tabspace between the texts in headr. Any idea on how to mak it?
    Rakesh

    Depending on Fontsize the space might be so narrow that you believe its not there.
    check in the debugger if there is really a space in the string, the clause "separated by space" will insert one for sure.
    May be you'reshowing the ALV before you are modifying the listheader?
    Another approach is using strings, blanks at the end of a string are not deleted
    concatenate 'ABC ' 'XYZ' into s.
    and
    concatenate `ABC ` `XYZ` into s.
    will give different results, be aware of the difference in the quots in both cases. Using the second example you can insert as many blanks as you want.

  • How to maintain Space between text in Smart form

    Hi Experts,
    How to maintain space between text in smat form.
    For example
    I need to maintain like this
    Prepared By:                       Passed By:                  Approved By:       
        but after save it come like this 
    Prepared By:   Passed By:  Approved By:      
    How to maintain spaces between texts?
    Regards,
    Sreedhar.

    hi,
    we can give space in the smartform in the same way as in the scripts with two commas one space can be given.
    when u click on the text in the window ,
    there in the general attributes at the left hand side u can find a small icon for editor in that u can define the spaces with the variable to be printed in &var&.

  • Firefox has too much space between text

    Something changed in my Firefox display. It is now showing a large amount of space between text. Also, the fields for data entry have increased their size. Text size is okay. Thank you for your help.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can set the <b>layout.css.devPixelsPerPx</b> pref on the <b>about:config</b> page to 1.0
    You can adjust layout.css.devPixelsPerPx starting from 1.0 in 0.1 or 0.05 steps (1.1 or 0.9) to make icons show correctly.
    You can open the <b>about:config</b> page via the location/address bar.
    You can accept the warning and click "I'll be careful" to continue.
    *http://kb.mozillazine.org/about:config
    Use an extension to adjust the text size in the user interface and the page zoom in the browser window.
    You can look at this extension to adjust the font size for the user interface.
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
    You can look at the Default FullZoom Level or NoScript extension if web pages need to be adjusted after changing layout.css.devPixelsPerPx.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • Can you move between text boxes without using the mouse?

    Can you move between text boxes without using the mouse?  When I have mutliple text boxes as a template, and then need to move from one to the next can I do it without having to use the mouse to click the next box??

    Jon,
    Option-Tab will sequence through the tables.
    Jerry

  • How do I clear the blank space between content and footer?

    In the process of revising a Muse website, I deleted some content from one of the pages and revised the content that remained on the page. Now I have a blank area between the bottom of the revised content and the top of the footer, and I can't seem to get rid of the blank space. It doesn't appear that there are any text blocks or other images in that area, so I can't find any objects to delete. Help?
    The website is currently published in a draft mode for client review. You can examine it at: http://page7creative.com/clients/coremove_jun2012draft/retreats.html. The page in question is the Retreats page. Restarting Muse made no difference. I work on the Mac platform.
    Before I sent this post, I decided to try creating a new page, then copy/paste the content onto the new page, and save the Muse site under a different name. Lo and behold, the page (and the site) works like it should...without any extra space above the footer on that page. It would appear that something went astray when I deleted content on that page. I can use the new page to get the site working properly, but decided to go ahead and send this post so that you can look at the page code and perhaps see what is wrong that is causing the blank space...in case I ever run into this again.
    Thank you.
    pyxis83

    Thanks for sending your file.
    There is a graphic at the bottom of the content area of the Retreats page that's been cropped to a size of zero width and 2 pixels in width.
    Unfortunately, there's a bug with pointer tool drag selection (aka marque selection) that prevents it from selecting an item that has zero width or zero height. Therefore the easiest way to select this item to delete it is to select any other item on the page, then hit the tab key repeatedly to cycle through every item on the page. When you get to this item you should see a little pile of selection handles at the left edge of the third column and right at the bottom of the content area. The width and height will display as zero and 2. Delete this item and the page will resize to fit the remaining content.

  • How to change spacing between text boxes

    In Pages, when I change something to multiple columns, it actually adds a large amount of space between what appears to be text boxes. If I enable "Show layout", it shows a border around the various "boxes" with the white space between them. How do I reduce this space and or remove it.

    Hi csing,
    In a document from the "Informal Resume" template, I turned on these settings in the View Menu to help me see how the document is arranged:
    Here is a some screen shots of the document. I added Borders to the text boxes for clarity. My notes are in red.
    In My Humble Opinion, this template is all over the place like a mad dog's breakfast. Use the template for ideas. Then create your own template from
    Menu > File > New from Template Chooser > Basic > Blank.
    Regards,
    Ian.

  • Blank line in text file after download

    Hi  all,
    i am using the below code to get the 254 blank spaces at the end of the text file & it's comming correctly.
    generally i am downloading 2 lines in the original program  & i am getting one blank line in between these two lines.
    The main thing is that i am getting this blank line when i run this program in my office computer. But i am not getting this blank line when i run this same program in my home laptop. Please suggest why this blank line is appearing & any solution ?
    DATA: BEGIN OF OUTTAB OCCURS 100,
            PROD_CODE(3),
            LINE_DETL(2043),
          END OF OUTTAB.
    DATA:V_OUTPUT(2043).
    DATA: space_character type c.
    space_character  = CL_ABAP_CHAR_UTILITIES=>MINCHAR.
            DO 254 times.
               CONCATENATE V_OUTPUT space_character INTO V_OUTPUT.
               ENDDO.
               OUTTAB-LINE_DETL = V_OUTPUT.APPEND OUTTAB.
    call function 'GUI_DOWNLOAD'
       EXPORTING
          filename = OUTFILE1
          filetype = 'ASC'
          TABLES
          data_tab = OUTTAB

    I don't think this is issue of ABAP. Any way just to check download the file on laptop and open same file and office computer
    if file looks ok then it is OS or text editor issue.
    Thanks,
    AK.

  • Acrobat Pro 9, blank lines in text boxes vanish upon save

    Folks,
    Since I upgraded from Acrobat Pro 8 to 9, whenever I put blank lines in a text box, the blank lines disappear as soon as the PDF is saved.
    Here's an example:
    - Open a PDF file
    - Click on text box tool in the toolbar (or from menu Comments->Comments and markup Tool->Text box tool
    - Draw a box on the PDF page somewhere
    - Enter "First line", then hit Return twice to add a blank line below, enter "Second line"
    - Right now my text box contains two lines of text separated by a blank line
    - Hit save
    - Blank line vanishes in the text box. Now the two text lines are on adjacent rows.
    This did not happen in either Acrobat Pro 7 or 8. I've been using textboxes consistently for years without this silly behavior.
    Any suggestions? I've looked through forums and knowledge bases and such to no avail.
    I have acrobat pro version 9.0.0 running on XPSP3.
    Thanks!
    Petros

    Hello Petros,
    I figured out how to make this work, at least on my computer.  Hold CTRL key and hit ENTER.  This leaves the space.  Hope this works for you.
    Phillip

  • Blank space between Detail section and Page Footer - How to remove it ?

    below is the problem.
    We make  report as followspage header Section details
    Employee Information    
    Report Footer
    Page Footer                   
    Other Information
    whenever we run this crystal report it leaves space in between  after employee information (Detail Section) and before Page Footer.We don't know its a problem  of footer or any other else.
    When i preview and print out the reports
    it showing Detail section 10 Rows (which satisfying condition) and then Blank space and then at the bottom of page shows Page Footer (which contain 2 subreports).
    Let me know if you need aditional information on this.
    pls provide suggestions.

    Try with this
    1. Suppress any unused sections in both sureports and in the mainreport.
    2. Check all the fields fits the sections. Select all the fields in the section and give align top and make all the fields of same height and make it fit to the section.
    Hope this solves your problem.

  • PowerPoint using macro to delete text boxes after printing

    Hi,
    We created custom shows in Powerpoint and are running a macro to insert temporary page numbers on the slides before printing.  The issue is that I need to remove the page numbers after printing.  I'm a novice at VBA so I'm sure there is an easy
    solution, but nothing I've tried so far has been successful.  The code is displayed below for your reference.  Any help is greatly appreciated. Thanks!
    Sub PrintCustomShow()
          ' Change this number to specify your starting slide number.
          Const lStartNum As Long = 1
          ' Ask the user which custom show they want to print.
          Dim strShowToPrint As String, strPrompt As String
          Dim strTitle As String, strDefault As String
          ' See if any custom shows are defined.
          If ActivePresentation.SlideShowSettings.NamedSlideShows.Count _
             < 1 Then
             ' No custom shows are defined.
             ' Set up the string for the message box.
             strPrompt = "You have no custom shows defined!"
             ' Display the message box and stop the macro.
             MsgBox strPrompt, vbCritical
             End
          End If
          ' Find the page number placeholder; if found, pick up the style.
          Dim rect As PageBoxSize
          Dim oPlaceHolder As Shape
          Dim bFound As Boolean: bFound = False
          For Each oPlaceHolder In _
             ActivePresentation.SlideMaster.Shapes.Placeholders
             ' Look for the slide number placeholder.
             If oPlaceHolder.PlaceholderFormat.Type = _
                ppPlaceholderSlideNumber Then
                ' Get the position of the page number placeholder.
                rect.l = oPlaceHolder.Left
                rect.t = oPlaceHolder.Top
                rect.w = oPlaceHolder.Width
                rect.h = oPlaceHolder.Height
                ' Get the formatting of the slide number placeholder.
                oPlaceHolder.PickUp
                ' Found the slide number placeholder, so set the
                ' bFound boolean to True.
                bFound = True
                Exit For
             End If
          Next oPlaceHolder
          ' See if a slide number placeholder was found.
          ' If not found, exit the macro.
          If bFound = False Then
             ' Unable to find slide number placeholder.
             MsgBox "Your master slide does not contain a slide number " _
                & "placeholder. Add a " & vbCrLf & "slide number placeholder" _
                & " and run the macro again.", vbCritical
             End
          End If
          ' Set up the string for the input box.
          strPrompt = "Type the name of the custom show you want to print." _
             & vbCrLf & vbCrLf & "Custom Show List" & vbCrLf _
             & "==============" & vbCrLf
          ' This is the title of the input box.
          strTitle = "Print Custom Show"
          ' Use the first defined show as the default.
          strDefault = _
             ActivePresentation.SlideShowSettings.NamedSlideShows(1).Name
          ' Obtain the names of all custom slide shows.
          Dim oCustomShow As NamedSlideShow
          For Each oCustomShow In _
             ActivePresentation.SlideShowSettings.NamedSlideShows
             strPrompt = strPrompt & oCustomShow.Name & vbCrLf
          Next oCustomShow
          Dim bMatch As Boolean: bMatch = False
          ' Loop until a named show is matched or user clicks Cancel.
          While (bMatch = False)
             ' Display the input box that prompts the user to type in
             ' the slide show they want to print.
             strShowToPrint = InputBox(strPrompt, strTitle, strDefault)
             ' See if user clicked Cancel.
             If strShowToPrint = "" Then
                End
             End If
             ' Make sure the return value of the input box is a valid name.
             For Each oCustomShow In _
                ActivePresentation.SlideShowSettings.NamedSlideShows
                ' See if the show is in the NamedSlideShows collection.
                If strShowToPrint = oCustomShow.Name Then
                   bMatch = True
                   ' Leave the For loop, because a match was found.
                   Exit For
                End If
                ' No match was found.
                bMatch = False
             Next oCustomShow
          Wend
          ' Get the array of slide IDs used in the show.
          Dim vShowSlideIDs As Variant
          With ActivePresentation.SlideShowSettings
              vShowSlideIDs = .NamedSlideShows(strShowToPrint).SlideIDs
          End With
          ' Loop through the slides and turn off page numbering.
          Dim vSlideID As Variant
          Dim oSlide As Slide
          Dim Info() As SlideInfo
          ' Make room in the array.
          ReDim Preserve Info(UBound(vShowSlideIDs) - 1)
          ' Save the current background printing setting and
          ' then turn background printing off.
          Dim bBackgroundPrinting As Boolean
          bBackgroundPrinting = _
             ActivePresentation.PrintOptions.PrintInBackground
          ActivePresentation.PrintOptions.PrintInBackground = msoFalse
          ' Loop through every slide in the custom show.
          Dim x As Long: x = 0
          For Each vSlideID In vShowSlideIDs
             ' The first element in the array is zero and not used.
             If vSlideID <> 0 Then
                ' Add slide ID to the array.
                Info(x).ID = CLng(vSlideID)
                ' Get a reference to the slide.
                Set oSlide = ActivePresentation.Slides.FindBySlideID(vSlideID)
                ' Store the visible state of the page number.
                Info(x).IsVisible = oSlide.HeadersFooters.SlideNumber.Visible
                ' Turn off page numbering, if needed.
                If Info(x).IsVisible = True Then
                   oSlide.HeadersFooters.SlideNumber.Visible = msoFalse
                End If
                ' Create a text box and add a temporary page number in it.
                Dim oShape As Shape
                Set oShape = _
                   oSlide.Shapes.AddTextbox(msoTextOrientationHorizontal, _
                                            rect.l, rect.t, _
                                            rect.w, rect.h)
                ' Apply the formatting used for the slide number placeholder to
                ' the text box you just created.
                oShape.Apply
                ' Add the page number text to the text box.
                oShape.TextFrame.TextRange = CStr(x + lStartNum)
                ' Increment the array element positon.
                x = x + 1
             End If
          Next vSlideID
    ' Print the custom show. NOTE: You must turn background printing off.
                 With ActivePresentation
                 With .PrintOptions
                 .RangeType = ppPrintNamedSlideShow
                 .SlideShowName = strShowToPrint
                 End With
                 .PrintOut
                End With
          ' Restore the slide information.
          For x = 0 To UBound(Info)
             ' Get a reference to the slide.
             Set oSlide = ActivePresentation.Slides.FindBySlideID(Info(x).ID)
             oSlide.HeadersFooters.SlideNumber.Visible = Info(x).IsVisible
          Next x
          ' Restore the background printing setting.
          ActivePresentation.PrintOptions.PrintInBackground = _
             bBackgroundPrinting
       End Sub

    Hi hlolrich,
    According to the description, you want to remove the shapes which created after you print the presentaion.
    I suggest that you name the shape you added with some rule, then we can delete thease shapes via the name rule.
    And here is a sample that you delete the shapes which name contains the
    myShape words on the first slide for your reference:
    Sub deleteShapes()
    For Each aShape In Application.ActivePresentation.Slides(1).Shapes
    If InStr(aShape.Name, "myShape") Then
    aShape.Delete
    End If
    Next aShape
    End Sub
    Also you can learn more about PowerPoint developing from link below:
    How do I... (PowerPoint 2013 developer reference)
    PowerPoint 2013
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Controling space between Text Items when using htp.p('HTMLDB_ITEM.TEXT')

    I'm using the following code inside a table tag within a loop to generate a multi-row printable form
    htp.p('<td cellspacing="0" align="right" width="100%" style="font-size:8pt">'||HTMLDB_ITEM.TEXT(p_idx=>2,p_size=>1)||'</td>');
    I'm still getting gaps between rows.
    How do I control the space between each row ? I want each text item row packed up like a spreadsheet with no gaps between rows. Although not shown (border="0") there is the enclosing table cell for each field, so what I want is no cellspacing and maximized item height within each cell.
    But with the above code I'm getting...
    etc.
    but I want
    Anyone know how to do this?
    regards
    Paul P

    Hi Chris , how's it goin'...
    thanks for the response. I know how to control a table cell area's height but it's the height of the inner textitem that I'm having trouble with. When I turn on border="1" There's not much space left between cells, just the default width of a line. I just don't know how to expand the height of the text item. The CSS code you suggested, where do I put the code and how do I apply it?
    Here is the guts of the PLSQL report code
    for des_rec in des_cur loop
    htp.p('<table height="100%" width="95%"border="0">');
    htp.p('<tr>');
    htp.p('<td style="font-size:8pt;font-family:Arial" width="80%" nowrap >'||
    des_rec.DES_SERVICE_DESC||'</td>');
    htp.p('<td cellspacing="0" align="right" width="5%" style="font-size:8pt">'||
    HTMLDB_ITEM.TEXT(p_idx=>2,p_size=>1)||'</td>');
    htp.p('<td cellspacing="0" align="left" width="5%" style="font-size:8pt">'||
    HTMLDB_ITEM.TEXT(p_idx=>3,p_size=>1)||'</td>');
    htp.p('</tr>');
    htp.p('</table>');
    end loop;
    regards
    Paul P

  • How to change the Label of input text box after selecting a value in LOV.

    Hi All,
    I have a requirement that after selecting a value in LOV the Label of the next input text box should change accordingly.
    I am able to do cascading LOV's.
    how can i meet this requirement?
    TIA,
    Vishal

    Sample:
    JSPX Page:
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
    xmlns:f="http://java.sun.com/jsf/core"
    xmlns:h="http://java.sun.com/jsf/html"
    xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view>
    <af:document id="d1">
    <af:messages id="m1"/>
    <af:form id="f1">
    <af:panelFormLayout id="pfl1">
    <af:inputText value="#{bindings.FirstName.inputValue}"
    label="#{bindings.FirstName.hints.label}"
    required="#{bindings.FirstName.hints.mandatory}"
    columns="#{bindings.FirstName.hints.displayWidth}"
    maximumLength="#{bindings.FirstName.hints.precision}"
    shortDesc="#{bindings.FirstName.hints.tooltip}"
    id="it1" *binding="#{ForumSampleBean.inputText}"*
    *partialTriggers="departmentIdId">*
    <f:validator binding="#{bindings.FirstName.validator}"/>
    </af:inputText>
    <af:inputComboboxListOfValues id="departmentIdId"
    popupTitle="Search and Select: #{bindings.DepartmentId.hints.label}"
    value="#{bindings.DepartmentId.inputValue}"
    label="#{bindings.DepartmentId.hints.label}"
    model="#{bindings.DepartmentId.listOfValuesModel}"
    required="#{bindings.DepartmentId.hints.mandatory}"
    columns="#{bindings.DepartmentId.hints.displayWidth}"
    shortDesc="#{bindings.DepartmentId.hints.tooltip}"
    *autoSubmit="true"*
    *immediate="true"*
    *valueChangeListener="#{ForumSampleBean.lovValueChangeListener}">*
    <f:validator binding="#{bindings.DepartmentId.validator}"/>
    <af:convertNumber groupingUsed="false"
    pattern="#{bindings.DepartmentId.format}"/>
    </af:inputComboboxListOfValues>
    </af:panelFormLayout>
    </af:form>
    </af:document>
    </f:view>
    </jsp:root>
    *Managed Bean:*
    public class ForumSampleBean {
    private RichInputText inputText;
    public ForumSampleBean() {
    super();
    public void setInputText(RichInputText inputText) {
    this.inputText = inputText;
    public RichInputText getInputText() {
    return inputText;
    public void lovValueChangeListener(ValueChangeEvent valueChangeEvent) {
    *this.inputText.setLabel("New Label");*
    Thanks,
    Navaneeth

  • Tab Between Text Boxes in Pages

    Is there a way to tab between custom floating text boxes in a Custom Template? I've created a form, and don't want my users to have to click on each text box to enter the data.
    Thank you.

    No, but…
    If you can redesign your form to allow using a table to contain the entry boxes, you can use tab or return to move from one cell to the next.
    Regards,
    Barry

Maybe you are looking for