Blank space on left and right of page.

I have (2) computers using the exact same version of Firefox and same model of monitor. On some web pages (e.g. CNN.com), one monitor has the content fills up the entire page (starting from the top right to bottom left), while the other monitor has a 1.5-inch blank space on both the left and right sides. I matched all the Firefox settings between the two but I still see the difference. How do I eliminate the blank space? Thanks.

Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

Similar Messages

Dead Space on left and right side

Is there any way to get rid of the dead space on the left and right hand sides? Thanks.

Hi there,
you can't completely get rid of the dead-space on the left and on the right. But you can increase the content width thus reducing the dead space.
Select the page in iWeb, Open the Inspector, Go to the Page tab (second from the left) and select Layout, increase the number displaying under Content width (everything up to 950 should be alright but note that for some templates it doesn't work so good 'cause they weren't built to be increased... I hope they change that somewhen...)
Regards,
Cédric

Pages go from right to left, blank space on left and cannot see all of page at one time

All my screens move to the right and there is blank space on the left which is about 4 inches wide. Then my screen goes back to normal for a second or two and then back to the right again and I cannot see the whole page.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
If you increased the minimum font size then try the default setting 'none' as a high value can cause issues like you described.
* Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
* Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"

Cp 8 - How to add ppt slides to an existing project with space to the left and right ?

After much trial and error, i know exactly what I want. The priority for me is clear and unscaled captured video, and my project resolution shall be 1260x700.
now, i want to bring my ppt slides in and respect the aspect ratio- this means that there will be blank space to the left and right of the slides. The active area of the ppt slide should be about 700 h and 4/3 * 700 width. To avoid scaling, i would love them to be 699 x 932 and have the areas to the left and right blank. i am also willing to make my project 1260x702.
The objective here is to avoid scaling. I have seen that things look great when scaling is avoided.

Maybe you'll find some ideas here: Create and Use a "Knockout" Master Slide - Captivate blog

How do I create and header on the left and auto number pages on the top right? I can't rearrange my document by making page 10 page 5 and so forth

I've just completed my school report however I seem to be having difficulty with creating a header. I've managed to create the header for all pages in my document by however I also need to use APA style and insert page number on the top right hand corner of each page. I've chosen to auto number them and clicked on INSERT --AuTO PAGE NUMBERS however if I need to make changes to the page numbers, each change i make repeats on every page. Please help.
I also can't seem to rearrange my document. It's 10 pages long and i want to make page 10 page 1. I thought I could click on that page and drag it into page 1 position like in Keynote however it's not offering me that option. when i click on page 10 in my page thumbnails, all of my pages are highlighted yellow instead of that 1 particular page. what am I doing wrong? someone please help

You can chose to make left and right headers different in:
Inspector > Layout > Section
To move material the best solution is always to copy and paste the content where you want it. You can move sections however so:
click at end of page 9 > Menu > Insert > Section Break
You will then have a separate yellow border around the page 10 thumbnail and can drag it to the beginning.
Peter

Is there a way to tie to iPads together so that when you turn a page with a tap on one, both iPads turn a page. I am using the ipad to replace piano sheet music. The challenge is that ordinary sheet music is on both a left and right page.

We are trying to use an ipad to replace ordinary paper sheet music on a piano. When truning ordinary paper pages, it is sometimes hard to grasp one page, turn it quickly and get it to stay turned. The idea with using an ipad is that a tap turns the page, it stays turned. However,,,,,ordinary sheet music is on both left and right pages. With one turn you get 2 new pages. The ipad, being smaller results in only one page and therefore twice as many page turn taps; more taps equals less hands on the piano. If we could tie 2 ipads together and get them both to turn the page simultaneously it would be nice. We are trying to get used to using the ipad. We are using ForScore app to get sheet music into the ipad; we could load one with odd pages and one with even pages. Maybe this is getting too complicated.
Anyway to tie 2 units together
John

No way to control one device from the other. But, according to ForScore, you should be able to display two sheets side by side in landscape mode (2-up view)? Not sure if that helps as it must make the actual print smaller to do so.
http://www.forscoreapp.com/about/#interface

? how to add page numbers in pages 5.2, starting with 2. Pages '09 had an option to not show folio on page one. Also any how to do left and right folios for a Tabloid? Many trhanks

? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .

Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl

How to make those shadowed borders left and right of your page?

Hi, Can someone tell me if I am on the right track? Here's what I've done so far. I've specified the background colour in the properties section. I've set up a 3 column table (fixed size) that has small columns left and right and a big one in the middle. For those small columns I've pickwhipped to 2 small gifs with the shadow. Previewed in Safari and everything looks ok.
My question: is this the best way to do this? Or does it need a CSS approach? And if so, how?
Now I want to give the bottom a shadow as well. Do I proceed in the same way? So make a left corner, right corner and a bottom? I'm working with GL CS2.

The best way to slice things up depends on how the page is layed out. If the content area has a fixed width that centers (or doesn't), then might make more sense to have 3 vertically stacked divs with the background and drop shadows, then nest another div in the middle with margins for the actual content. Or, if the content size is completely fluid, the same structure could still work with floating divs (or absolutely positioned relative to a single container?) holding the corner images. Or there's always the old-school tables way of slicing things up (though I'd avoid that).
There's more than one way to do it, and I don't know that any single option is necessarily the "right" way to go... as long as it works and validates?

I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the maste

I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the master, and I cannot get the margins to alternate at print time. The larger margin is always on the left. Can anyone please help me on this, as I have spent hours and lots of ink.

Set up as facing pages with a larger inside margin.

Thunderbolt has 2" blank border on the left and right edges.

When I connect my Macbook Pro 13" to my Thunderbolt display, the screen display has a 2" border on the left and right edge. How do I size the screen to fill up the entire display?

Hi. I had the same resolution problem as jmzmac...I turned off mirroring and my Thunderbolt display now just has the standard screen saver on it. If I click on System Preferences that window will show on the TBD and I can move my mouse across the two screens so I have an extended desktop but I really want mirroring with the correct resolution so there isn't that 2" space on either side of the screen. I tried the clamshell mode (closing the MacBook Pro, waiting a few seconds, pressing any key to wake it up) but nothing happens on the TBD. Any help would be greatly appreciated. (Running 10.6.8)

How do I get page numbers on the left and right side of the page?

I am finishing up a book in PAGES '08 on my Mac.
How do I get page numbers on the left and right side of the page.
I can get them on the page but I'd like them on the left and right sides.
Evan

If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
Control (right) - click on the open dmg icon and select "Eject xxxx" from the contextual window.
Then find the actual dmg file associated with those icons
and drag to the Trash in the Dock and empty.

The keyboard on my macbook air has stopped working. It was fine at lunch time now the up and down arrows move the page and the left and right take me into dashboard and out. The keys beep if pressed the only way to type is to use bluetooth keyboard.

The keyboard on my macbook air has stopped working. It was fine at lunch time now the up and down arrows move the page and the left and right take me into dashboard and out. The keys beep if pressed the only way to type is to use bluetooth keyboard.please help

"If none of the keys work, your computer may be showing a low battery alert that you can’t see.
Connect your computer to an electric outlet or an external keyboard to see the alert".
http://support.apple.com/kb/PH10680
http://support.apple.com/kb/ts1381
Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

It it possible to have info on the left and right sides of iweb templates?

When I look at my iweb website there is empty space on the left and right sides of my screen. I was wondering if this space could be used at all?

Hi
You can increase the width of your Page, go into Inspector, Page Tab. From here you can adjust the Content Width, which is the width of your page, the bits that you see on the left and right are fillers, for people who's browsers are set bigger than your site. You can change the color that shows by changing the Browser Background.
In the good 'ole days, most people had screens that were only 800 W x 600 H, but these days most people have at least 1024 W x 768 H (some do, no doubt still have 800x600). So, 1024 is really the max width you can go, dont forget that you need to leave some space for the browser as well, and the scroll bars.
But pages this big are wider than normal, the best thing to do is experiment and see what works for you.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.6) www.willg4pb.com for iWeb tips

Carousel Appearance. How to narrow Left and right margins (ADF 11.1.2)

Hello,
I need help to adjust the appearance of a carousel component.
As you can see in the picture i need more space for the current page of carousel (need to enlarge the current page) and i want to narrow the space marked with a red line (left and right).
Property settings available do not help.
Can anyone have an idea?
[http://i52.tinypic.com/28arlma.png]

Hi,
did you try skinning ?
http://download.oracle.com/docs/cd/E16162_01/web.1112/e16181/af_skin.htm#BAJFEFCJ
The skin tag documentation is here
http://download.oracle.com/docs/cd/E16162_01/apirefs.1112/e17497/toc.htm
Just have a look for what is available for af:carousel (and note the new skin editor)
Frank

Touchpad left and right clicks don't work on Yoga 2 pro

Hi,
I just bought a a yoga 2 pro. After setting up, I found that the two bottom keys, left and right keys on the trackpad do not work. Double tap also doesn't work. I reinstall the touchpad driver to no avail. Other gestures on the touchpad work fine, single tap registers as left click, two finger scroll also works. Also, when I use a blue tooth mouse, left and right key works fine.
I am not sure if this is a hardware problem as when I swipe on the area of the two bottom keys, they register the movement. Just not click. Anyone can help me?

Hello,
I've had a Yoga2 Pro now for six months or so. Just recently the left click stopped working correctly. What I notice is that when holding down the left click button on the touch pad, and I try to drag a slider (like a volume slider or to drag a selection box or to drag a scroll box on a page, or to highlight text) and it stops holding down the click. Sometimes it works, sometimes it keeps stopping.
Now, the right click is malfunctioning as well. I press right click on something like an image, and nothing happens. I have to right click on something 2-10 times now for it to register that I'm right clicking.
Also, should I be able to tap the touchpad with two fingers and have that be a right click, or am I just reading that I should be able to do that on the screen (which can)?
I have downloaded the drivers for the y2p touchpad and the y2-13 and the generic ones from the synaptics webpage, but before I uninstall my drivers and try to install those, I want to be sure that is the correct and only possible fix. I'm hoping its not a hardware malfunction. I am running Win 8.1.
Thank you.

Blank space on left and right of page.

Similar Messages

Maybe you are looking for