Blank space..............
my requirement is that i have to accomdate three windows in a page
1) <b>main window</b>
2)<b>to display some text</b>
3) <b>total window</b>
2 and 3 windows will be displayed at the end.
but when data comes to mutiple pages the sapce is left in place of 2 and 3 window
how can remove this space............as data inside main is only displayed.
e.g cosider page lenght is 30 cm
1) <b>main window</b> -
> 15 cm
2)<b>to display some text</b>----
> 10 cm
3) <b>total window</b>----
> 5 cm
so except last page in print all pages has got 15 cm balnk spcae.
Hi!,
If the requirement is not to have a fixed window size set , then
Try to incoorporate the Text and Total window in the same Main window , so that once the data which you were having in the main window (before) will be executed and after that the Text and The total window , and this Text and Total window details will be only in the last page.
And set the Main window length to 30 cm .
If there is any thing else i can help .... please let me know...
and do not forget to give rewards to the valid replys.
Similar Messages
-
Fill with blanks(spaces) a VARCHAR2 type
Thanks in advance,
I have a VARCHAR2 type rtesta's var of length x(100 char)
how i can fill(write) it without create a other varchar2 var that it'll be only filled with blanks(spaces). e.g
rtesta := ' PC'||fil1||'xxx||fill2....
where fil1 = say 10 spaces.. fill2 = 63 spaces and so on
I would like something as
rtesta := ' PC'|| RPAD(null,10)||'xxx||RPAD(null,63) ...
but.... Oracle treats an empty string as null. And nulls are always a bit special within Oracle. Particularly, rpad('', n) and lpad('', n) returns null.
Exists a built in for my problem?
Thanksalter table your_table modify(your_column char(100));
update your_table set your_column = ' '
where your_clumn is null; /* (added) But,this is no good for performance */
alter table your_table modify(your_column varchar2(100));Exapmples.
SQL> set null (null)
SQL> create table test (vc varchar2(100));
Table created.
SQL> insert into test values ('');
1 row created.
SQL> insert into test values ('a');
1 row created.
SQL> insert into test values ('abcde');
1 row created.
SQL> select substr(vc,1,10) vc,length(vc) len from test;
VC LEN
(null) (null)
a 1
abcde 5
SQL> alter table test modify(vc char(100));
Table altered.
SQL> update test set vc = ' ' where vc is null;
1 row updated.
SQL> alter table test modify(vc varchar2(100));
Table altered.
SQL> select substr(vc,1,10) vc,length(vc) len from test;
VC LEN
100
a 100
abcde 100----
I misread OP's problem, sorry.
Message was edited by:
ushitaki -
How to use blank space replace NULL on discoverer viewer
Hi,
There is a report that has a varchar field should show text values, and if NULL, I need it show blank space, and does in disco desktop, but on viewer, the same worksheet shows NULL.
Even I changed in the Tools - Options - Format menu(desktop), it still show NULL on viewer.
why?
please help! thanks!
sammyHi Sammy,
Unfortunately ‘some’ of the settings set in Desktop do not carry over to Viewer. These options need to be defined for Viewer itself.
A temporary way to set the Viewer settings is to click on ‘Options’ when logged in Viewer itself. You’ll have to open a responsibility or report before this option becomes available to select. Within here you’ll be able to change the way NULL values are seen. However this method only makes the change for the User you logged in with.
To make the change for all users, it’s best to edit the PREF.TXT file on the Discoverer Server. Please view the documentation below for more information on how to configure Viewer. For windows platform click here : http://download-uk.oracle.com/docs/html/A90287_01/toc.htm,
For Unix platform click here : http://download-uk.oracle.com/docs/html/A90288_01/toc.htm. Once you’ve run the applypreference script, these settings will be forced down to all users of Discoverer.
Hopefully this will help ;-)
Lance -
I have a few problems...
I wanted to make a partition to install windows, I tried to use bootcamp 5 where it wanted to partition and install windows at the same time. I do not have a cd of windows but instead had it on a flash drive. Bootcamp couldn't find it. Instead I was reading forums and found that there was another way to install windows by partioning your harddrive using the disk utility, downloading the bootcamp drivers, and installing rEFIt (an app that when starting the compouter a menu would come up to boot windows from the flashdrive). I try that and the windows install screen gets me to the point where I pick a partition. I attempt to pick the partitioned drive but a message comes up telling me that "this is of the GPT partition style" and windows cannot be installed on the drive.
So now I went back to disk utility and deleted the partition but there is still blank space. I wanted to retry and install windows through bootcamp (somehow) but a message comes up that there cannot be any partitions or that a partition must be created using bootcamp. SO i keep trying to drag the partition over the blank space and hit apply but nothing happens.
By the way I was trying to install windows 8 pro, some forums would say that you cant install win8 however I found others that said you could. How do I fix my partition and how do I use bootcamp to install windows (preferrably 8)?Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.
-
hi experts,
i have a requirement that i need to develop a report which is same as t-code cs11,
but in cs11 we are getting the report for a single material and its bom components .
in my require ment i need to develop a report for range of materials, i almost did that but the problem i am facing
is how to obtain a blank space in alv report, after completion of single material and its components r displayed.
can any body pls suggest me.
thanks®ards
maheshlaphi srihari,
i tried that but the blank lines r appending at the end of internal table.
the following is the table ( t_main ) i am passing to the function module
LOOP AT T_STKO INTO W_STKO.
W_MAIN-STLNR = W_STKO-STLNR.
W_MAIN-STLAL = W_STKO-STLAL.
W_MAIN-STLST = W_STKO-STLST.
W_MAIN-BMENG = W_STKO-BMENG.
W_MAIN-BMEIN = W_STKO-BMEIN.
READ TABLE T_MAST INTO W_MAST WITH KEY STLNR = W_STKO-STLNR .
W_MAIN-MATNR = W_MAST-MATNR.
W_MAIN-WERKS = W_MAST-WERKS.
W_MAIN-STLAN = W_MAST-STLAN.
READ TABLE T_MAKT INTO W_MAKT WITH KEY MATNR = W_MAST-MATNR .
W_MAIN-MAKTX = W_MAKT-MAKTX.
APPEND W_MAIN TO T_MAIN.
CLEAR W_MAIN.
ENDLOOP.
can u pls send me some sampe code.
thanks. -
How to remove the extra or blank space from RTF Template
Hi All,
Try to remove the extra space from xml template.
Here I have attached the .xml file with .rdf, here the issue is when you load the data we will get 2 page output but when I am trying to add any column or extra space in the last page of this template the output getting 4 pages with lot of blank space. Could you please guide me to solve this issue.
Could you please let me know how to do the attachement in this forum as I am new to this community.
Regards,
SushantCan you drop in a mail with RTF, xml data to [email protected], I will help you on the issue.
-
Instead of showing 0 in report its getting blank space
Hi Sap Gurus.
I am running the query in rsrt, in my report i am getting instead of 0 values it is showing Blank space. But in my source data there is value is 0. But when i execute the query its getting blank space. How to over come this problem.
could u please let me know.
Best Regards,
venkat.Hi,
Check out this.. it might solve your issue.
in Query Properties
Tab: value display >> Zero value Display >> Select "zero as Default Text" under Display Zeros
And Tab: Rows/Columns >> Supress Zeros Option >> "Do not Supress" is selected.
Thanks
Jitu
Edited by: Jitenderkumar Danduvia on Feb 23, 2010 12:45 PM -
RTF Template Blank Spaces Issue
Hi,
I have one issue in the RTF File. I have developed templates for the dunning letter report.
If i have only one line in the main body table and below this table i have some contents information for the customer to print in the report. The issue is there is blank spaces between the table and the contents when i am printing one or two invoices in the report.
I want to remove this blank spaces and bring the contents information to print just below the table even it is sinle report or many records in the report.
please guide me if any one come accross with this issue.
with regards
RamHi,
Make sure there are no spaces before/after your form fields - put them on their own line with no spaces in between. On their own line they don't generate an extra line.
If you are still having problems email me the xml and rtf ggr888 [AT] gmail [D0T] com
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/ -
Lots of blank space when printing array with only last element printed
I have a slight problem I have been trying to figure it out for days but can't see where my problem is, its probably staring me in the face but just can't seem to see it.
I am trying to print out my 2 dimensional array outdie my try block. Inside the trying block I have two for loops in for the arrays. Within the second for loop I have a while to put token from Stringtokeniser into my 2 arrays. When I print my arrays in this while bit it prints fine however when I print outside the try block it only print the last element and lots of blank space before the element.
Below is the code, hope you guys can see the problem. Thank you in advance
import java.io.*;
import java.net.*;
import java.lang.*;
import java.util.*;
import javax.swing.*;
public class javaflights4
public static final String MESSAGE_SEPERATOR = "#";
public static final String MESSAGE_SEPERATOR1 = "*";
public static void main(String[] args) throws IOException
String data = null;
File file;
BufferedReader reader = null;
file = new File("datafile.txt");
String flights[] [];
//String flightdata[];
flights = new String[21][7];
int x = 0;
//flightdata = new String[7];
int y = 0;
try
reader = new BufferedReader(new FileReader(file));
//data = reader.readLine();
while((data = reader.readLine())!= null)
data.trim();
StringTokenizer tokenised = new StringTokenizer(data, MESSAGE_SEPERATOR1);
for(x = 0; x<=flights.length; x++)
for(y = 0; y<=flights.length; y++)
while(tokenised.hasMoreTokens())
//System.out.println(tokenised.nextToken());
flights [x] [y] = tokenised.nextToken();
//System.out.print("*"+ flights [x] [y]+"&");
System.out.println();
catch(ArrayIndexOutOfBoundsException e1)
System.out.println("error at " + e1);
catch(Exception e)
finally
try
reader.close();
catch(Exception e)
int i = 0;
int j = 0;
System.out.print(flights [j]);
//System.out.println();A number of problems.
First, I bet you see a lot of "error at" messages, don't you? You create a 21x7 array, then go through the first array up to 21, going through the second one all the way to 21 as well.
your second for loop should go to flights[x].length, not flights.length. That will eliminate the need for ArrayIndexOutOfBounds checking, which should have been an indication that you were doing something wrong.
Second, when you get to flights[0][0] (the very first iteration of the inner loop) you are taking every element from the StringTokenizer and setting flights[0][0] to each, thereby overwriting the previous one. There will be nothing in the StringTokenizer left for any of the other (21x7)-1=146 array elements. At the end of all the loops, the very first element in the array (flights[0][0]) should contain the last token in the file.
At the end, you only print the first element (i=0, j=0, println(flight[ i][j])) which explains why you see the last element from the file.
I'm assuming you have a file with 21 lines, each of which has 7 items on the line. Here is some pseudo-code to help you out:
count the lines
reset the file
create a 2d array with the first dimension set to the number of lines.
int i = 0;
while (read a line) {
Tokenize the line;
count the tokens;
create an array whose size is the number of tokens;
stuff the tokens into the array;
set flights[i++] to this array;
} -
Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. Double clicking on the box will open the image in a separate window. It's very slow and tedious for multiple images. How can I go back to attached and displayed images? If I click on "Forward", the images appear instantly in the email to be forwarded.
Scott,
My problem seemed to fix itself. Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something. Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it. A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to. Well, I shut it down one night so the following morning, I could write down each step. Lo and behold, the images, etc. are all there again! Solved, but I'm not sure why.
Tom -
How do I get rid of the blank space at the bottom of the new Firefox menu?
The new firefox 4 has a different menu system. IT has blank space at the bottom wiht just a plus sign that opens new tabs. I can get that from the + sign by the tabs and don't want it or the rest of the blank space on the bar. I need all the space in the main window I can get. How do I get rid of this?
Found my own answer, disable Conduit Engine toolbar, whatever the heck that is. Why it's enabled to start with is beyond me.Hi stephanie,
These are unrelated questions/statements.
Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
Regards,
Barry -
How to delete blank space from value of Infoobject in the transfer rule
does anyboady know how to write a routine in the transfer rule in order to delete ending blank spaces from value of Infoobject 'ORDTEXT'. E.g. value: 'ABM '? After routine, the result should be 'ABM'.
Thanks for any input.Deleting 'ending blank spaces' from a character type field (ie info-object or text) in SAP is not meaningful. For all usage, a char type field of length 8 having value 'ABM ' is same as 'ABM'.
Ok, HTML is changing the display in the above, so let me restate it
For all usage, a char type field of length 8 having value 'ABM_____' is same as 'ABM', take the underscore character (_) in the first string as a placeholder for space character.
Edited by: Ajay Das on Jul 29, 2009 12:07 PM -
In Firefox 10 and before, I could select a small portion of a web page and it would print the selected portion on a single page. In Firefox 11, it prints blank space for the portion above my selection before printing my selection. This blank space could span several pages, and my printer prints those several blank pages with only headers and footers.
Still happens with Firefox 12. I wish they'd just fix it, the way it used to be in Firefox 10, without the complicated workaround suggested above.
-
How can I change a string to a numeric when the numbers are separated by blank spaces?
I would like to change a list of numbers in string to a list of number in numeric like in the attached vi. Unfortunately, the numbers are not separated by commas but by blank spaces. Which character can I use for the blank space?
Ninskaya
Attachments:
readcommdelim.vi 19 KBWhy don't you just use the Spreadsheet String to Array function instead. You can specify any delimiter you want. See the attached picture.
Attachments:
string_to_array.jpg 6 KB -
How to get rid of blank space showing above my pages
Hi:
I built my site dyingforthetruth.com using Muse (thanks, it's pretty nifty!), following a video tutorial you provided.
I've ended up with a blank space showing above all pages, and much trying with the blue lines and rebuilding my header strip has NOT succeeded in fixing it.
Here's a snapshot of the top left part of the "main" master, showing the blue lines and the space at the top.
You can see what it looks like on the web by going to the site URL (dyingforthetruth.com).
Can you please tell me how to fix this. I find it a bit strange to see all my pages for this site coming up in all 5 browsers I've tried (IE, Chrome, Firefox, Opera, Safari) with a pronounced gap at the top of them all.
Thanks!Go to Page> Page Properties and on the "Padding" section set "Top" to 0. That should do it.
If you are on a master page make sure that the top blue arrow is at 0. That arrow controls the top of page, and you need to have a padding of 0 for what you want. -
How do I clear the blank space between content and footer?
In the process of revising a Muse website, I deleted some content from one of the pages and revised the content that remained on the page. Now I have a blank area between the bottom of the revised content and the top of the footer, and I can't seem to get rid of the blank space. It doesn't appear that there are any text blocks or other images in that area, so I can't find any objects to delete. Help?
The website is currently published in a draft mode for client review. You can examine it at: http://page7creative.com/clients/coremove_jun2012draft/retreats.html. The page in question is the Retreats page. Restarting Muse made no difference. I work on the Mac platform.
Before I sent this post, I decided to try creating a new page, then copy/paste the content onto the new page, and save the Muse site under a different name. Lo and behold, the page (and the site) works like it should...without any extra space above the footer on that page. It would appear that something went astray when I deleted content on that page. I can use the new page to get the site working properly, but decided to go ahead and send this post so that you can look at the page code and perhaps see what is wrong that is causing the blank space...in case I ever run into this again.
Thank you.
pyxis83Thanks for sending your file.
There is a graphic at the bottom of the content area of the Retreats page that's been cropped to a size of zero width and 2 pixels in width.
Unfortunately, there's a bug with pointer tool drag selection (aka marque selection) that prevents it from selecting an item that has zero width or zero height. Therefore the easiest way to select this item to delete it is to select any other item on the page, then hit the tab key repeatedly to cycle through every item on the page. When you get to this item you should see a little pile of selection handles at the left edge of the third column and right at the bottom of the content area. The width and height will display as zero and 2. Delete this item and the page will resize to fit the remaining content.
Maybe you are looking for
-
All external users are missing in Shared services.
Hi All, We are on Hyperion System 11.1.2.. Today all of a sudden in production users are not able to log in. So logged in as admin (native user) to see whats going on. Surprised to see that all the groups are empty and all the users are removed from
-
I am helping a disabled person with a printing problem involving a Macbook, an Epson SX218, and MS Office for Macs. The Macbook had been recently updated to OS X 10.6.8, and the printer driver reinstalled, by an Apple store. She complained the printe
-
Moving Albums Between Libraries
Hello - I am recreating my iPhoto library, due to a major corruption when I transitioned from iPhoto 08 to iPhoto 09. Is there any way to move my folders/albums from the old library to the new library? Thanks! kmw
-
Authorization Check in Status Profile
Hello All, I'm trying to restrict "Closed" User Status to some users in Service Ticket Transaction of IC Web Client. Here are the steps that I followed. 1) Created a Authorization Key - "TEST" 2) Assigned the "Authorization Key" in the Status profile
-
Non repeating frame - when/how to use
Hi, How do I use a non repeating frame on it's own. I have one query in which I have selected 3 fields. In the paper layout, I have placed 3 fields in a non repeating frame. When I run the report, I get a REP-1213 error - Filed 'xxx' at frequency bel