Blank target (width and height specifications)

Hello,
I need some assistance in setting up a very basic link. A
piece of text that when you click it'll open a new window with a
flash video in it. I'd like the new window to fit the flash video.
If possible, i would like the new browser window to NOT have
address bar, status bar etc...Just the flash video. Can this be
done in dreamweaver?
If so,
could you let me know what the html code is...
I've managed linking the html file (with the flash video) to
the text. I just get a full browser window that is not
necessary....
could i link the .flv file directly (like i would do with a
.jpg file or....?
thanks,
a.

> Can this be done in dreamweaver?
Yes, with the OpenBrowserWindow behavior.
> could i link the .flv file directly (like i would do
with a .jpg file
> or....?
No. You have to link to a SWF file that grabs the FLV file, I
believe. And
you would do that in DW by using the INSERT | Media >
Flash Video option.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"oneirocrite" <[email protected]> wrote in
message
news:frkq8f$cj5$[email protected]..
> Hello,
>
> I need some assistance in setting up a very basic link.
A piece of text
> that
> when you click it'll open a new window with a flash
video in it. I'd like
> the
> new window to fit the flash video. If possible, i would
like the new
> browser
> window to NOT have address bar, status bar etc...Just
the flash video. Can
> this
> be done in dreamweaver?
>
> If so,
> could you let me know what the html code is...
> I've managed linking the html file (with the flash
video) to the text. I
> just
> get a full browser window that is not necessary....
>
> could i link the .flv file directly (like i would do
with a .jpg file
> or....?
>
> thanks,
> a.
>

Similar Messages

Specifying target width and height

I want to make one of my b to b links just a small pop-up
listing board members names which would open in front of the
current page. Do i create a separate html file to link to? If so,
how do I set width and height?
Is there some other way to do this?
TIA
Gretchen

DW has a native behavior called "Open Browser Window" which
will let you do
this.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"InwoodLady" <[email protected]> wrote in
message
news:gr0h1e$s39$[email protected]..
>I want to make one of my b to b links just a small pop-up
listing board
>members
> names which would open in front of the current page. Do
i create a
> separate
> html file to link to? If so, how do I set width and
height?
>
> Is there some other way to do this?
>
> TIA
> Gretchen
>

Resize and crop images to a specific width and height

Hi,
I want to convert images to thumbnails with a 'standard' format - I need all images to have the same width and height.
So I need to resize and then crop the images. Is this possibe with JAI? Are there other libraries which can do this better?
I've read about ImageMagick - are the Java interfaces to ImageMagick good?
/best regards, Håkan Jacobsson - System developer in Sweden

Duplicate posting, answers are here
http://forums.sun.com/thread.jspa?threadID=5419291
Pleas don't duplicate unless you note that you have done so and provide pointers to the duplicates - as I'm sure you're aware. . .

Constraining mouse motion to specific distance (width and height)

Hi,
I want to constrain the mouse motion over a canvas by allowing it to move through specified distance (width and height).
How can i do this?
What does the translatePoint() in MouseEvent do? How do i use it?
Can someone help me with this?
Thanks
Niteen

The correct way with Pixel Bender 1.0 is indeed to pass in the width and height as parameters. There are no ramifications.

How to change the width and height of the visible part of the of the report

I have define a report with paper size 'Letter', orientation 'landscape' and 30 columns. Dynamically I am changing width of columns and suppressing many columns of the report.
Mostly using first 16-20 columns and others get suppressed.
Now problem is that when navigating the report thru crystal viewer, a huge blank spaces getting display on right of the report. When we take jump to some part of report thru navigation tree, the whole report gets shifted to left and only blank part is visible and it is required to scroll left.
Even printing is not working correctly.
Is there any way to change the width and height of the visible part of the report in the viewer thru .net classes? Setting the width and height of the report in Load event handler doesn't help.
Example: CrystalReportViewer1.Width = 200; - is not helping.
Is there any other solution?
Please let me know.
Thanks
Mahesh Patel

Hi Yogesh,
Your suggestion 'reportDocument.PrintOptions.PaperSize=PaperSize.PaperLedger;' along with 'PaperOrientation' setting as follow works fine. I tried to switch between Landscape and Portrait depending on report width.
reportDocument.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
But problem with crystal viewer remain as it is.
While navigating report thru crystal viewer, when we take jump to some part of report thru navigation tree, the whole report gets shifted to left and it is required to scroll left.
Thanks for your very good suggestion.
Mahesh Patel

[JS] Page item (rectangle frame) width and height

Following is my attempt at writing a function for width and height. It appears to work on rotated and sheared objects. Can anyone tell me if I'm on the right track?
>function WidthAndHeight(myRectangle) // Returns an array [width,height]
]var myRectangleTopLeft = myRectangle.resolve(AnchorPoint.topLeftAnchor, CoordinateSpaces.pasteboardCoordinates, true);
var myRectangleTopRight = myRectangle.resolve(AnchorPoint.topRightAnchor, CoordinateSpaces.pasteboardCoordinates, true);
var myRectangleBottomLeft = myRectangle.resolve(AnchorPoint.bottomLeftAnchor, CoordinateSpaces.pasteboardCoordinates, true);
]var d1x = (myRectangleTopRight[0][0] - myRectangleTopLeft[0][0]);
var d1y = (myRectangleTopRight[0][1] - myRectangleTopLeft[0][1]);
var myWidth = hypotenuse(d1x,d1y);
var d2x = (myRectangleTopLeft[0][0] - myRectangleBottomLeft[0][0]);
var d2y = (myRectangleTopLeft[0][1] - myRectangleBottomLeft[0][1]);
var myHeight = hypotenuse(d2x,d2y);
]return [myWidth,myHeight];
]function hypotenuse(d1,d2)
]]return Math.sqrt ( Math.pow(d1,2) + Math.pow(d2,2) );

Dave, you are absolutely right (no surprise here) about always returning points. I'm not sure, but I think this may actually be an InDesign bug. At the end of the 'resolve' method the 'true' value is meant to indicate 'use ruler units', I believe. Having read the documentation, however, it does seem like certain transformation coordinate spaces functions only work in points.
To make this a more complete function, I've updated it to include a conversion to the current ruler units. I'm using the UnitValue object, and perhaps I'm misunderstanding something, but I cannot easily convert to a new UnitValue using the ruler measurements enumerations (it requires a string value to represent the target units). So I've had to include a switch function to get from the enumeration to the string value. Also, the UnitValue object does not seem to work with agates, and I haven't gone so far as to write my own conversion function for that, so the function has to exit with an alert if the user has agates as their ruler units.
If anyone can offer a more elegant way of dealing with this, it would be great. Or even better, some insight into why the resolve method does not seem to honour the ruler units. This _is_ getting a bit over-the-top for a simple width and height function. Maybe Adobe will consider just adding the property to the page item and putting us all (well, certainly me, anyway) out of our misery (I've put in a feature request).
> function WidthAndHeight(myRectangle) // Returns an array [width,height]
]] var myRectangleTopLeft = myRectangle.resolve(AnchorPoint.topLeftAnchor, CoordinateSpaces.pasteboardCoordinates, true);
var myRectangleTopRight = myRectangle.resolve(AnchorPoint.topRightAnchor, CoordinateSpaces.pasteboardCoordinates, true);
var myRectangleBottomLeft = myRectangle.resolve(AnchorPoint.bottomLeftAnchor, CoordinateSpaces.pasteboardCoordinates, true);
]] var d1x = (myRectangleTopRight[0][0] - myRectangleTopLeft[0][0]);
var d1y = (myRectangleTopRight[0][1] - myRectangleTopLeft[0][1]);
var myWidth = hypotenuse(d1x,d1y);
var d2x = (myRectangleTopLeft[0][0] - myRectangleBottomLeft[0][0]);
var d2y = (myRectangleTopLeft[0][1] - myRectangleBottomLeft[0][1]);
var myHeight = hypotenuse(d2x,d2y);
]] var myHorizontalUnits = unitsEnumToString(app.documents[0].viewPreferences.horizontalMeasurementUnits);
var myVerticalUnits = unitsEnumToString(app.documents[0].viewPreferences.verticalMeasurementUnits);
]] myWidth = new UnitValue(myWidth,"points");
myHeight = new UnitValue(myHeight,"points");
]] myWidth = myWidth.as(myHorizontalUnits);
myHeight = myHeight.as(myVerticalUnits);
]] return [myWidth,myHeight];
]] function hypotenuse(d1,d2)
]]]] return Math.sqrt ( Math.pow(d1,2) + Math.pow(d2,2) );
]] function unitsEnumToString(myUnitsEnum)
]]]] switch(myUnitsEnum)
]]]]]] case 2054188905 :
]]]]]]] return "points";
]]]]]] case 2054187363 :
]]]]]]] return "picas";
]]]]]] case 2053729891 :
]]]]]]] return "inches";
]]]]]] case 2053729892 :
]]]]]]] return "inches decimal";
]]]]]] case 2053991795 :
]]]]]]] return "millimeters";
]]]]]] case 2053336435 :
]]]]]]] return "centimeters";
]]]]]] case 2053335395 :
]]]]]]] return "ciceros";
]]]]]] default :
]]]]]]] alert("Cannot convert to the current ruler units. Sorry.");
exit();

Flex 4 Premium reference to the Stage issue! width and height seem to be switched??

So I am doing a very basic resize effect with a panel, but if I want it to fill the screen, I have to switch stage.stageWidth and stage.stageHeight. I have also traced them out and they come out as switched values. Anyone else having this issue?
protected function panel1_addedToStageHandler(event:Event):void
 trace(stage.stageWidth, " " , stage.stageHeight);

Hi,
You maybe running into some sort of layout constraint also it depends on how you are initiating the animation, if you are doing it on startup you need to wait for creationComplete to ensure all your dimensions have been calculated for the browser. You shouldn't need to use stage dimensions either. The following code resizes a panel to fill the browser. (note using top/left/bottom/right is a lot smoother than width and height).
David
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx"
 creationComplete="application1_creationCompleteHandler(event)">
<fx:Script>
<![CDATA[
import mx.events.FlexEvent;
protected function application1_creationCompleteHandler(event:FlexEvent):void
pw.valueFrom=pnl.width;
ph.valueFrom=pnl.height;
fillscreen.play();
]]>
</fx:Script>
<fx:Declarations>
<s:Animate id="fillscreen" target="{pnl}" repeatCount="1" duration="1000">
<s:SimpleMotionPath id="pw" property="width" valueTo="{width}"/>
<s:SimpleMotionPath id="ph" property="height" valueTo="{height}"/>
</s:Animate>
</fx:Declarations>
<s:Panel id="pnl" width="250" height="200" horizontalCenter="0" verticalCenter="0">
</s:Panel>
</s:Application>

How to set field width and height at runtime programatically?

Hi all,
I want to set the width and height of a report field by reading its values from the database table.
Is it possible in Oracle reports?
How to achieve this in Oracle reports 10g?
Any help will be highly appreciated.
Thanks .... Best Regards
Bilal

You cannot give it a specific value. During design you can set Horizontal and Vertical Elasticity properties to Variable, so the items are automatically scaled when running the report.

Units of parameters width and height passed in drawRect(int,int,int,int)

Units of parameters width and height passed in drawRect(int,int,int,int)

Units of parameters width and height passed in drawRect(int,int,int,int)They are just units in the User Space. Since you can change the
scale of the AffineTransform associated with your graphics object,
you can't be more specific than that.
Initially the claim is that the units are 96 per inch, but that isn't true.
For example, change the resolution of your screen and run the code
again!

Rotating and scaling a movieclip withing only its parent width and height

Dear friends,
I'd like to rotate a movieclip within specific area (its parent width and height) and it can't rotate out of it.
How can I achieve that.
When I say for exampe:
mc.rotation = 10;
it rotates also outside the parent area.
How can I restrict it to only parent area.
Thank you in advance.

[OTTOMH]
With each rotation step you could check the bounds of the rotating MC. If it's greater than the containing MC, you can calculate the scale factor and apply it to the x- and y-scale of the rotating clip.
The clip would have to be deadcentre in the containing clip for this to work though.
I suppose there would be some mathimatical way with most primitive shapes to calculate the width and height with a certain rotation, but I suppose this would be easiest.

How to create a map that is larger than the game in width and height?

hi,
i wounder how i can create a map(not the design) that is larger than the game in width and height, part of it will appear in the main page and anther part you can move to it after you press the arrow symbol, but the map is just one image so i want put it in line and out line the game page, and the out line part includes buttons and symbols the player can use, but it will be in line and the other part will be out line when you press the left arrow or the down arrow, how i can do that?
and is that possible to animate it so when the player press the arrow, will give it action to start the animation in one sec, i know how to animate it if that possible but i don't know which code i will use for the mouse click with the arrow symbol, and how to use the same code in the same symbol to start anther animation depending on which part of the map is on?

I don't know a lot about mask and masked layers and how to work with the normal layers beside i will use some 3D graphics but not in the background, i will explain all this to you to be more clearly.
first i am using action script 3.0
close ex,
you have 2d map"image" 900*300 pixel.
this image contains some 2d symbols when you click will go to anther normal map (anther normal layer) so they must appear.
your game 320*320 px, and the place the map will show on 300*300, and there's basics objects will be in most pages including the page that show the map so i don't know a lot about how this will work with mask layers.
so you can only see the left side of the map image and what it contains, while there's two arrows one to the left and one to the right there's three cases here,
first when it show the left side(start from x:0 to x:300), the left arrow will not active when you press and the right arrow will start an animation that make the map image move to the mid side in one sec when you press.
in mid side (start from x:301 to x:600) the same left arrow will active when you press to send you back to the left side while the same right arrow will be active to send you not to the mid side but to the right side,
when moved to the right side the same left arrow will be active to send you to the mid and the right will not active when you press and depending on that,
first how to make the large image appear with the three sides in the same place without effecting the other objects "like disappearing them" ?
and the codes i need in the same left or right arrow symbol to make different actions with the same symbol when clicked depending on which part of the map is on.

Java returning incorrect values for width and height of a Tiff image

I have some TIFF images (sorry, I cannot post them b/c of there confidential nature) that are returning the incorrect values for the width and height. I am using Image.getWidth(null) and have tried the relevant methods from BufferedImage. When I open the same files in external viewers (Irfanview, MS Office Document Imaging) they look fine and report the "correct" dimensions. When I re-save the files, my code works fine. Obviously, there is something wrong with the files, but why would the Java code fail and not the external viewers? Is there some way I can detect file problems?
Here is the code, the relevant section is in the print() routine.
* ImagePrinter.java
* Created on Feb 27, 2008
* Created by tso1207
import java.awt.Graphics2D;
import java.awt.Image;
import java.awt.print.PageFormat;
import java.awt.print.PrinterException;
import java.io.File;
import java.io.IOException;
import java.util.Iterator;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.stream.FileImageInputStream;
import javax.imageio.stream.ImageInputStream;
import com.shelter.io.FileTypeIdentifier;
public class ImagePrinter extends FilePrintable
 private final ImageReader _reader;
 private final int _pageCount;
 private final boolean _isTiff;
 //for speed we will hold current page info in memory
 private Image _image = null;
 private int _imgWidth = 0;
 private int _imgHeight = 0;
 private int _currentPage = -1;
 public ImagePrinter(File imageFile) throws IOException
 super(imageFile);
 ImageInputStream fis = new FileImageInputStream(getFile());
 Iterator readerIter = ImageIO.getImageReaders(fis);
 ImageReader reader = null;
 while (readerIter.hasNext())
 reader = (ImageReader) readerIter.next();
 reader.setInput(fis);
 _reader = reader;
 int pageCount = 1;
 String mimeType = FileTypeIdentifier.getMimeType(imageFile, true);
 if (mimeType.equalsIgnoreCase("image/tiff"))
 _isTiff = true;
 pageCount = reader.getNumImages(true);
 else
 _isTiff = false;
 _pageCount = pageCount;
 public int print(java.awt.Graphics g, java.awt.print.PageFormat pf, int pageIndex)
 throws java.awt.print.PrinterException
 int drawX = 0, drawY = 0;
 double scaleRatio = 1;
 if (getCurrentPage() != (pageIndex - getPageOffset()))
 try
 setCurrentPage(pageIndex - getPageOffset());
 setImage(_reader.read(getCurrentPage()));
 setImgWidth(getImage().getWidth(null));
 setImgHeight(getImage().getHeight(null));
 catch (IndexOutOfBoundsException e)
 return NO_SUCH_PAGE;
 catch (IOException e)
 throw new PrinterException(e.getLocalizedMessage());
 if (!_isTiff && getImgWidth() > getImgHeight())
 pf.setOrientation(PageFormat.LANDSCAPE);
 else
 pf.setOrientation(PageFormat.PORTRAIT);
 Graphics2D g2 = (Graphics2D) g;
 g2.translate(pf.getImageableX(), pf.getImageableY());
 g2.setClip(0, 0, (int) pf.getImageableWidth(), (int) pf.getImageableHeight());
 scaleRatio =
 (double) ((getImgWidth() > getImgHeight())
 ? (pf.getImageableWidth() / getImgWidth())
 : (pf.getImageableHeight() / getImgHeight()));
 //check the scale ratio to make sure that we will not write something off the page
 if ((getImgWidth() * scaleRatio) > pf.getImageableWidth())
 scaleRatio = (pf.getImageableWidth() / getImgWidth());
 else if ((getImgHeight() * scaleRatio) > pf.getImageableHeight())
 scaleRatio = (pf.getImageableHeight() / getImgHeight());
 int drawWidth = getImgWidth();
 int drawHeight = getImgHeight();
 //center image
 if (scaleRatio < 1)
 drawX = (int) ((pf.getImageableWidth() - (getImgWidth() * scaleRatio)) / 2);
 drawY = (int) ((pf.getImageableHeight() - (getImgHeight() * scaleRatio)) / 2);
 drawWidth = (int) (getImgWidth() * scaleRatio);
 drawHeight = (int) (getImgHeight() * scaleRatio);
 else
 drawX = (int) (pf.getImageableWidth() - getImgWidth()) / 2;
 drawY = (int) (pf.getImageableHeight() - getImgHeight()) / 2;
 g2.drawImage(getImage(), drawX, drawY, drawWidth, drawHeight, null);
 g2.dispose();
 return PAGE_EXISTS;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @return
 public int getPageCount()
 return _pageCount;
 public void destroy()
 setImage(null);
 try
 _reader.reset();
 _reader.dispose();
 catch (Exception e)
 System.gc();
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public Image getImage()
 return _image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgHeight()
 return _imgHeight;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgWidth()
 return _imgWidth;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param image
 public void setImage(Image image)
 _image = image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgHeight(int i)
 _imgHeight = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgWidth(int i)
 _imgWidth = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getCurrentPage()
 return _currentPage;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setCurrentPage(int i)
 _currentPage = i;
}Edited by: jloyd01 on Jul 3, 2008 8:26 AM

Figured it out. The files have a different vertical and horizontal resolutions. In this case the horizontal resolution is 200 DPI and the vertical is 100 DPI. The imgage width and height values are based on those resolution values. I wrote a section of code to take care of the problem (at least for TIFF 6.0)
 private void setPageSize(int pageNum) throws IOException
 IIOMetadata imageMetadata = _reader.getImageMetadata(pageNum);
 //Get the IFD (Image File Directory) which is the root of all the tags
 //for this image. From here we can get all the tags in the image.
 TIFFDirectory ifd = TIFFDirectory.createFromMetadata(imageMetadata);
 double xPixles = ifd.getTIFFField(256).getAsDouble(0);
 double yPixles = ifd.getTIFFField(257).getAsDouble(0);
 double xRes = ifd.getTIFFField(282).getAsDouble(0);
 double yres = ifd.getTIFFField(283).getAsDouble(0);
 int resUnits = ifd.getTIFFField(296).getAsInt(0);
 double imageWidth = xPixles / xRes;
 double imageHeight = yPixles / yres;
 //if units are in CM convert ot inches
 if (resUnits == 3)
 imageWidth = imageWidth * 0.3937;
 imageHeight = imageHeight * 0.3937;
 //convert to pixles in 72 DPI
 imageWidth = imageWidth * 72;
 imageHeight = imageHeight * 72;
 setImgWidth((int) Math.round(imageWidth));
 setImgHeight((int) Math.round(imageHeight));
 setImgAspectRatio(imageWidth / imageHeight);
 }

What are the units of "Width" and "Height" of a Shape?

What are the units of "Width" and "Height" properties of a Shape when programming?
Something odd like points or twips or tweedles or nibbles?
http://www.ransen.com Cad and Graphics software

Width and Height are properties of type Single; they represent the dimensions of the shape in points, where 72 points = 1 inch.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Finding the width and height of an image

Hi...
i have a path to an image "images/me.gif" and i'm trying to find its width and height.. am trying to use javax.swing.ImageIcon but it refuses to recognise the constructor with just the filename (string) parameter, and needs a URL to the file... anyone knows what i'm doing wrong??? is this the wrong class that i'm using...!??!?!?!?!?

String filename = "images/me.gif";
Image myImage = carregarImagem(filename);
System.out.println(myImage.getWidth(this));
System.out.println(myImage.getHeight(this));
* M�todo que carrega imagens na mem�ria, a partir da URL onde o
* applet est� sendo carregado. O uso de um 'mediaTracker' � fundamental para
* evitar problemas quanto � velocidade de carga de uma imagem. Se voc� n�o
* usar um mediaTracker, o seu c�digo pode tentar usar uma imagem antes dela
* estar plenamente carregada na mem�ria, o que causaria um erro de execu��o.
* @param nomeDaImagem O nome da imagem a ser carregada
* @return A imagem requisitada ou null caso n�o haja tal imagem na url do applet
public Image carregarImagem(String nomeDaImagem)
               try
                               Image imagem = getImage(getDocumentBase(), nomeDaImagem);
                               MediaTracker carregador = new MediaTracker(this);
                               carregador.addImage(imagem, 0);
                               carregador.waitForID(0);
                               return imagem;
               catch(Exception erro)
                               erro.printStackTrace();
                               System.exit(0);
                               return null;

Current page (not Document) width and height with JSX

Hi,
I am trying to create a script that saves every page of the document and add its width and height to the name.
So far I managed to get the dimensions of the document using:
app.activeDocument.pages.documentPreferences.pageWidth;
app.activeDocument.pages.documentPreferences.pageHeight;
That's ok when all the pages in the document have the same dimensions (Document Preferences).
However, when I use custom pages that does not work.
I tried the code below but does not work either.
for(i=0; i<nb;i++)
 app.activeDocument.pages[i].documentPreferences.pageWidth;
 app.activeDocument.pages[i].documentPreferences.pageHeight;
I have done some research and I don't seem to find any information regarding custom pages dimensions.
Can you please help with this?
Thanks in advance,
Isko

Main();
function Main() {
 var doc = app.activeDocument,
 pages = doc.pages,
 page, width, height;
 for (var i = 0; i < pages.length; i++) {
 page = pages[i];
 width = page.bounds[3] - page.bounds[1];
 height = page.bounds[2] - page.bounds[0];
 $.writeln("Page: " + page.name + " - " + "width = " + width + ", height = " + height);

Blank target (width and height specifications)

Similar Messages

Maybe you are looking for