Blank (white) screen, iPod won't work

I've had my iPod video for a few months now. I went to start my computer this morning and it wouldn't start. I tried time and time again and it only started once I disconnected my iPod from my computer. After I did that, I noticed that the screen of my iPod was blank, or rather completely white. Now no matter what I do to my iPod it won't work. Does anyone have any idea why this may be happening? Please let me know if you do and thanks in advance.
~Diana

How did you fix it? My daughter's ipod nano is the same way. when you turn it on, the screen is just light, (I haven't checked to see if it plays) Thanks for any help

Similar Messages

  • Blank White Screen - iPod Nano 3rd generation

    When I removed the iPod from its docking station today the screen went blank (white).  It's still fully functional - plays music, volume up and down etc.  However, it's extremely difficult to use without the screen.
    I have read various offers of solutions - such as:
    Holding Menu & Select button - but Apple logo does not display and cannot reset
    Heat up - I've tried placing on a radiator to warm connections - no change
    Run down battery and reset - not change
    Any other idea please?

    1. Make sure the Hold switch is not operated (i.e. you have it set so that the Red is not showing on the switch.
    2. Press and hold the Centre and Menu buttons at the same time, keep them pressed until the Apple Logo appears on the screen (this can take a while, over 10 secs, so keep them pressed).
    That should reset the iPod, if it does not work, then try step 2 again with the Hold switch in the other position.
    Ian

  • *~*Slideshow exports with music but blank white screen!*~*

    The details:
    I'm using iPhoto '09 on a mid 2009 MBP, Lion 10.7.2, 2.35Ghz, NVIDIA GeForce 9400M 256 MB, 4GB RAM DDR3, 320GB HDD but now 108 GB free.
    I have 176 photos in the slideshow, all .jpg. Using the Scrapbook theme with a "Custom Playlist" (selected from iPhoto's Slideshow music browser/settings menu thingo) of 3 songs -one is the theme's default song, the other 2 are mine from iTunes Library.
    Exporting to .m4v using the "Display" quality setting. Takes forever, about 1.5 - 2 hours, at the end in the final export there's either a blank white screen and the music works, or it all works up to one point and then the screen goes white and the music chages abruptly to the nexrt song.
    Am I doing anything incorectly, or is there something I might be able to try in an attempt to fix this?
    Advice or help so, so greatly appreciated

    Yes the track details were written in English, thanks for your response. And they weren't tracks with DRM.
    I ended up solving it ... can't be specific about what resolved the problem because I tried multiple things.
    I heard there was a problem with iTunes 10 and iPhoto 'talking' to eachother, so I copied my songs over into the iPhoto theme music folder (in Application Support >> iPhoto Slideshows) and selected them in iPhoto by clicking "Music" and, this time instead of clicking iTunes, I used the default themes folder/drop-down selection. I then exported via clicking the Export >> Custom Export button and selected .mov with Apple Intermediate Codec, changing the FPS to 25 (someone said to do this in another thread, it wasn't about the same problem as mine but I tried it anyway. I'm not a techie person but it also may be important to justify the choice of 25FPS by saying I'm using PAL ... I think that has something to do with the FPS?!)
    Anyway, after all that, the final export played back perfectly! Hope this is able to help anyone out there who may have the same problem. I exported two different slideshows, one had about 150 more photos than the other, so I can safely say the successful export wasn't a fluke!

  • My ipod touch screen froze on a blank white page and won't let me connect to itunes what to do?

    My ipod touch screen froze on a blank white page and won't let me connect to itunes what to do?

    It works for many users. In some cases the white screen is due to a hardware problem and there is nothing that one can do short of getting someonet to know what they are doing and take the iPod apart andmaybe fix the hardware problem.
    xxSoccerKyleeAnnaxx wrote:
    Can you please stop writing this on everyone's discussion because it obviously isn't working and I need a different answer....

  • My wifes Ipod Nano has blank white screen but still works

    As the topic says, the nano has a blank white screen but still plays songs and works with iTunes. i have tried reseting it via holding menu and select for 10 seconds without success also i have tried holding select and play/pause after reseting (hard reset i guess) without any success.
    I have tried restoring factory defaluts and loading different versions of iPod update without success.

    You can check you service options here: Apple - Support - Service Answer Center

  • Hello all,     I have a 6G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the cl

    Hello all,
    I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
    What I have tried so far to no avail:
    Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
    Tried this: iPod nano (6th generation): Hardware troubleshooting
    Changed the watch face to display.
    Recharged the device overnight (without full discharge).
    Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
    Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
    Regards,

    Hey,
    I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
    Have you found any solution?
    Bah, this is annoying.
    //Gubbar

  • Frozen video ipod on a blank white screen, tried alot of things please help

    i have read through and tried all the suggestions that i saw. and nothing worked. my ipod has a blank white screen, and every time i reset it. it goes back to that white screen and makes a little noise on its own without headphones plugged in or anything. my mac does read that it is there. so i can't do any updates or anything help me please!

    Welcome to Apple Discussions!
    If your mac recognizes it, try restoring it...
    Restore iPod
    If it doesn't recognize it, try putting it into Disk Mode and then restore it...
    Putting iPod into Disk Mode
    btabz

  • Ipod 160 GB has blank white screen

    My 160 GB ipod has a blank white screen.  This happened simply by my plugging it in to my computer this morning to charge it.  I want to get it turned off so I can consider resetting it.

    Work through each of the recommend 5 R's of troubleshooting. If necessary, let the iPod's battery full drain first and then work through each one again as necessary.
    http://www.apple.com/support/ipod/five_rs/
    If they are unable to addresse the white screen issue, it's a good indicator of a hardware issue with the iPod's display or its display's connection to the logic board.
    B-rock

  • My ipod touch 4th gen froze! blank white screen and doesn't respond when turned off, or connected to my laptop

    my ipod touch 4th gen froze! only blank white screen and doesn't respond when turned off or connected to my laptop!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • Help to Diagnose Blank, White Screen for 4th Gen iPod

    Can you help me diagnose my problem? Fully charged Ipod Gen 4 syncs and plays music, but I can’t navigate due to blank, white screen. Reset to original factory settings from iTunes, re synced with no improvement. Doesn’t even show apple or battery icon when charging. Any advice?

    So you basically cannot see anything on the screen, because it is all white.
    Since it can play music, connect your earphones and let it play continuously until it runs out of power and turns off. Keep trying to turn it back on and playing music until it will no longer turn on. Then let it sit disconnected for at least 24 hours.
    You are trying to make the battery dead so that the iPod is completely unpowered.
    Then connect it to the computer or the power adapter and see if the screen is working again.
    Alternately, if you know how to open the iPod with the plastic tools, you can simply disconnect the battery for a few minutes and then reconnect.
    There is always the possibility that your iPod's screen has become defective.

  • Continuous beachball, now won't turn on or stay on. blank white screen

    First, I was getting the spinning beach ball (freeze), then I disconnected and reconnected the battery. It worked for 10 minutes, then i received a warning in my Mail folder that mail was damaged. now it won't turn on and I have a blank white screen. I can't get it to stay on long enough to do a diagnostic test. I was able to do an external backup yesterday before this crash

    It would be helpful if you indicated the EXACT MBP that you have:
    Try SMC and NVRAM resets:
    http://support.apple.com/en-us/HT201295
    http://support.apple.com/en-us/HT204063
    Then try a safe boot:
    http://support.apple.com/en-us/HT201262
    Ciao.

  • I am having problems connecting to home wifi.  It was working, but now all I get is a blank white screen.  I re-booted with no success.

    I am having problems connecting to home wifi.  It was working, but now all I get is a blank white screen.  I re-booted with no success.

    Hi, blank white screen where exactly?
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

    I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

    You would get better response from the iTunes community forum.
    Have a nice day!

  • How do I get my iTunes store to work? I have updated my iTunes to the latest version but every time I go to open it, it is just a blank white screen. No writing or anything. Help!?

    How do I get my iTunes store to work? I have updated my iTunes to the latest version but every time I go to open it, it is just a blank white screen. No writing or anything. Help!?

    Oh, and it is on a macbook pro

  • My Firefox is not working. (All I get is a blank white screen with the Fireox logo). If I have to reinstall firefox 3.66, how can I transfer my old profile to the new installation?

    My Firefox is not working (All I get is a blank white screen with the firefox logo. If I have to reinstall Firefox 3.66, how can I transfer my old profile to the new installation?
    == This happened ==
    Every time Firefox opened

    David.  Thank you very much.   The problem was not with the canvas but rather the Viewer.  But the solution was the same.  Somehow, the Viewer window was re-set to Alpha.  I changed it back to RGB.... and the picture is back.   These issues are often very simple.... but they can drive you bats if you don't know the answer.   Very grateful.  Tim

Maybe you are looking for

  • Gnome3 not work with ATI HD6950 Card?

    Hey all.. I'm just installed the ALL drivers from the testing, and its the versions: xf86-video-ati-6.14.2-1 mesa-7.10.99.git20110612-1 libdrm-2.4.25-1 And ofc, i'm using with last kernel 2.26.39. So what's the problem with that? Why i can't running

  • XML Parsing for one xml tag value we have issues

    Hi All We are getting XML file from External System using XML parser to decode and update Oracle Tables. It's working ok for all fields for one field it's working i.e we are not getting any Value l_n dbms_xmldom.DOMNode; v_service_level VARCHAR2(240)

  • Can I remove sepia tone but keep crop and other tone settings?

    I can't figure out how to remove the creative setting "Sepia tone" without resetting all settings on an image. Is there a way?

  • I was charged three times for the same film

    I buy a film and went to see my account i see I was charged three times for the same film, i want to be deleted the other two movies and my money back for that movies that I don't buy.

  • Add image in Runtime

    Post Author: BusinessObject CA Forum: .NET Hi, Wondering is there way to add external image that is stored somewhere in hard disk DURING RUNTIME! Thanks