Blanks inserted into certain hyperlinks

I've seen this a number of times, but I thought it may have been copy & paste errors. But they are not.
See this post http://forums.adobe.com/message/2008300#2008300
I have inserted two download links, and each of them has a blank inserted near the end of the string (install_flash_player_ax␢.exe, install_flash_player.ex␢e - blanks marked red).
The hyperlink itself works fine, but if somebody copys that string into a new post, the hyperlink won't work any longer.

I have seen that symptom many times! As you said, the link works anyway - and it appears fine even in the email notifications, but it is disfunctional for copy/paste from the Web forum.
The following is not exactly the same, and I don't know enough about the Jive app to determine if it needs its own thread or if the Jive code that does this is in the same module, so I thought I should add it here.
I've seen spaces arbitrarily inserted into code blocks as well via >>Insert->Syntax Highlighting->Plain
For example, http://forums.adobe.com/message/2004585#2004585 .
P1_Prod_Version=Shoc kwaveFlash
should be:
P1_Prod_Version=ShockwaveFlash
While I did not post that particular block, I have seen it happen in code blocks that I did post.
It is even worse in code blocks when people paste code with tabs AND spaces in the indentations. Jive seems to modify such spaces with several bogus variations of an HTML non-breaking space. Literally inserting spaces and showing them in the code as & npsp; &n bsp; &nb sp; and others. Just as a for instance, the following line from a code block in a different message (I have no idea what it will do with this paste, but will come back to confirm/deny its accuracy).
& nbsp; var correct = temp3=temp2.options[temp2.selectedIndex].text; &nb sp; &nbsp ; { & nbsp; var correct = temp3=temp2.options[temp2.selectedIndex].text; &nb sp; &nbsp ; {
Jive should not munge code in forums about code in any apparent way. It makes it hard to impossible to deal with, whether one is posting a question or a solution. The email interface is even worse in this regard (mentioned in other threads), but I would like to think that the Web interface should be easy enough to fix.
[Edit]
Yes, that code block is an accurate representation of what I saw in another thread.

Similar Messages

Everytime I insert a blank CD into my iMac, it spits it out. How can I fix this so I can burn CDs?

Everytime I insert a blank CD into my iMac, it spits it out. How can I fix this so I can burn CDs?

Try using a LensCleaner Disk first off. If that won't even run try a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
Then use the Lens Cleaner again. Make sure your disks are immaculately clean.

Custom Oaf form inserting blank records into custom table

Hi all,
I have developed custom OAF form to insert vendor details mapped to custom table.
Oaf form is working fine without giving any error.
In back end blank records is inserting into the custom table i.e. only WHO columns (creation_Date, created_by, last_update_login etc.) values are populating correctly but the
data which i am entering in OAF form is not populating into the table.
Please help, tnx in advance.
Regards,
Mohit

Do you have mapping of your form fields with the view object and view attribute ?

Inserting blank page into template

I am working in a template. I would like to insert a blank page into the middle of it and create my own thing and then continue with more pages from the template. How do I insert a blank page.

micheley,
I think the easiest and cleanest way is like this: click on View > Show Invisibles so that you can see all the hidden characters, then put your cursor in front of the last paragraph marker on the previous page. Click on Insert > Page Break. That will add a new, blank page inside your document.
-Dennis

When I insert a blank cd into my macbook pro nothing comes up. I am not able to put any music on it. What should I do?

Hey. When I put a blank cd into my computer nothing shows up. I am not able to put music on it. What should I do?
I have a disc that has this logo:
compact disc recordable cd-r

I just tried what u said and it wasn't on ignore. Any other ideas?

Manipulation of the size of an image inserted into an Image Field

Hi,
I'm learning LiveCycle Designer ES 8.2 as I go. My apologies for the lengthy post but I'm trying to give you as much background as possible.
I'm are trying to design a form that will allow us to automate data entry (by importing fields into our Access dbase instead doing the data entry by hand). However, at the end of the day, I also need an electronic pdf file of the same form and a printed paper copy. Things have been going well until working with the Image Field.
The form is fairly complicated - 4 pages long. We're collecting extensive data on specific locales (location, what was seen there, who did the work, etc). On one page, three different images (maps) are needed, each one showing different details on the site's location. [Please note these images will not be imported into the database but must appear in the electronic pdf and on the paper copy.] The people who fill out the forms are expected to do so using Adobe Reader (the form will have extended rights so that they can save the data they enter on the form). They would then email us the form as an xml file. Once we receive the form, we have to add some additional information and then the finalized paper copy and electronic pdf would be made. We have already done this successfully with much simpler forms, none of which have needed Image fields.
Here's my problem - one of the three maps required is a standard 1:50000 scale topographic map which shows things like contour lines and latitude/longitude lines. For accuracy and comparison reasons, having the standard 1:50000 scale is very important to us, so we can make absolutely certain the submitter has the right location. If the dot plotted on the map is out just a few millimeters, we're looking at an error that represents 100s of meters on the ground.
The current form exists in Word - we have never had any rules about the image formats used (jpg, gif, etc) or the resolution, as long as the image was clear. The only rule was that the scale of the topographical map image HAD to be at 1:50000 scale. This gets very tricky because Word will automatically mess with the physical appearance of the image, based on its resolution. In most cases, the submitter simply readjusted the image within Word, stretching/resizing it manually until the scale was correct. Another option was to use an image in the emf file format so that Word didn't readjust the image's appearance based on its resolution. Whatever method they used was fine by us, as long as the scale was correct.
So far, after playing with all the "sizing" options of the Image field, along with embedding or not embedding the file, I do not see any way to control the physical size of the image. On our form, the three image fields are different sizes, with 2 of them being small (~2x3 inches) and the 3rd being large (~7x7 inches). Regardless of the settings I chose for each image field, the program simply resizes the topographic map whatever Image field it was inserted into, making the same image appear physically smaller or larger at will. I cannot correct the scale by resizing it, like I can in Word. Instead, when I try to select the image, all I am asked is if I wish to insert another image. Inserting an .emf file format into the field doesn't work - it only shows a blank screen instead of the image.
Is there a way for the user to adjust the image's physical size in the form, after inserting it (like they can do in Word)? Demanding that everyone use a standardized resolution or image format also seems highly unlikely to work - there are too many submitters and too many programs that can be used to make the image (some are making them using GIS programs, others are scanning the bought topographic print). I'd appreciate any help you can give me on this. I have had very little luck tracking down discussions on Image fields and how they work best within LiveCycle. Any comments would be helpful!

Hi,
I have an example here that is intended to demonstrate the difference between Positioned and Flowed subforms: http://assure.ly/i8pSdy.
This shows how you can use a slider to change the dimensions of the image object.
I have extended this to an example with buttons to scale the image: http://assure.ly/i8ZI5Y
This may not be fine enough for your purposes, but it may give you some ideas.
Good luck,
Niall
Assure Dynamics

SQL Query produces different results when inserting into a table

I have an SQL query which produces different results when run as a simple query to when it is run as an INSERT INTO table SELECT ...
The query is:
SELECT   mhldr.account_number
,        NVL(MAX(DECODE(ap.party_sysid, mhldr.party_sysid,ap.empcat_code,NULL)),'UNKNWN') main_borrower_status
,        COUNT(1) num_apps
FROM     app_parties ap
SELECT   accsta.account_number
,        actply.party_sysid
,        RANK() OVER (PARTITION BY actply.table_sysid, actply.loanac_latype_code ORDER BY start_date, SYSID) ranking
FROM     activity_players actply
,        account_status accsta
WHERE    1 = 1
AND      actply.table_id (+) = 'ACCGRP'
AND      actply.acttyp_code (+) = 'MHLDRM'
AND      NVL(actply.loanac_latype_code (+),TO_NUMBER(SUBSTR(accsta.account_number,9,2))) = TO_NUMBER(SUBSTR(accsta.account_number,9,2))
AND      actply.table_sysid (+) = TO_NUMBER(SUBSTR(accsta.account_number,1,8))
) mhldr
WHERE    1 = 1
AND      ap.lenapp_account_number (+) = TO_NUMBER(SUBSTR(mhldr.account_number,1,8))
GROUP BY mhldr.account_number;      The INSERT INTO code:
TRUNCATE TABLE applicant_summary;
INSERT /*+ APPEND */
INTO     applicant_summary
( account_number
, main_borrower_status
, num_apps
SELECT   mhldr.account_number
,        NVL(MAX(DECODE(ap.party_sysid, mhldr.party_sysid,ap.empcat_code,NULL)),'UNKNWN') main_borrower_status
,        COUNT(1) num_apps
FROM     app_parties ap
SELECT   accsta.account_number
,        actply.party_sysid
,        RANK() OVER (PARTITION BY actply.table_sysid, actply.loanac_latype_code ORDER BY start_date, SYSID) ranking
FROM     activity_players actply
,        account_status accsta
WHERE    1 = 1
AND      actply.table_id (+) = 'ACCGRP'
AND      actply.acttyp_code (+) = 'MHLDRM'
AND      NVL(actply.loanac_latype_code (+),TO_NUMBER(SUBSTR(accsta.account_number,9,2))) = TO_NUMBER(SUBSTR(accsta.account_number,9,2))
AND      actply.table_sysid (+) = TO_NUMBER(SUBSTR(accsta.account_number,1,8))
) mhldr
WHERE    1 = 1
AND      ap.lenapp_account_number (+) = TO_NUMBER(SUBSTR(mhldr.account_number,1,8))
GROUP BY mhldr.account_number;      When run as a query, this code consistently returns 2 for the num_apps field (for a certain group of accounts), but when run as an INSERT INTO command, the num_apps field is logged as 1. I have secured the tables used within the query to ensure that nothing is changing the data in the underlying tables.
If I run the query as a cursor for loop with an insert into the applicant_summary table within the loop, I get the same results in the table as I get when I run as a stand alone query.
I would appreciate any suggestions for what could be causing this odd behaviour.
Cheers,
Steve
Oracle database details:
Oracle Database 10g Release 10.2.0.2.0 - Production
PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for 32-bit Windows: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
Edited by: stevensutcliffe on Oct 10, 2008 5:26 AM
Edited by: stevensutcliffe on Oct 10, 2008 5:27 AM

stevensutcliffe wrote:
Yes, using COUNT(*) gives the same result as COUNT(1).
I have found another example of this kind of behaviour:
Running the following INSERT statements produce different values for the total_amount_invested and num_records fields. It appears that adding the additional aggregation (MAX(amount_invested)) is causing problems with the other aggregated values.
Again, I have ensured that the source data and destination tables are not being accessed / changed by any other processes or users. Is this potentially a bug in Oracle?Just as a side note, these are not INSERT statements but CTAS statements.
The only non-bug explanation for this behaviour would be a potential query rewrite happening only under particular circumstances (but not always) in the lower integrity modes "trusted" or "stale_tolerated". So if you're not aware of any corresponding materialized views, your QUERY_REWRITE_INTEGRITY parameter is set to the default of "enforced" and your explain plan doesn't show any "MAT_VIEW REWRITE ACCESS" lines, I would consider this as a bug.
Since you're running on 10.2.0.2 it's not unlikely that you hit one of the various "wrong result" bugs that exist(ed) in Oracle. I'm aware of a particular one I've hit in 10.2.0.2 when performing a parallel NESTED LOOP ANTI operation which returned wrong results, but only in parallel execution. Serial execution was showing the correct results.
If you're performing parallel ddl/dml/query operations, try to do the same in serial execution to check if it is related to the parallel feature.
You could also test if omitting the "APPEND" hint changes anything but still these are just workarounds for a buggy behaviour.
I suggest to consider installing the latest patch set 10.2.0.4 but this requires thorough testing because there were (more or less) subtle changes/bugs introduced with [10.2.0.3|http://oracle-randolf.blogspot.com/2008/02/nasty-bug-introduced-with-patch-set.html] and [10.2.0.4|http://oracle-randolf.blogspot.com/2008/04/overview-of-new-and-changed-features-in.html].
You could also open a SR with Oracle and clarify if there is already a one-off patch available for your 10.2.0.2 platform release. If not it's quite unlikely that you are going to get a backport for 10.2.0.2.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Import parametes and insert into database table suggestions

experts need suggestions
created a table with 3 fields.
zstable.
field dataelement type length
kunnr kunnr      char 10       key field
name   dname      char   30      key field
aedat aedat        dats 8
aenam aenam       char 12
now i am creating a function modlue with two input parameters
1)kunnr
2)name
i want to update this two fields into table zstable.
1. so suggest me the best way to do this.
Delcarations in import options which one of the below is best and why?
name type char30
kunnr type kunnr
or
name like zstable-name
kunnr like zstable-kunnr
or
kunnr type zstable-kunnr
name type zstable-name.
2. inserting into table
the data that we recieve from the import parameters need to be inserted into the zstable.
please suggest me the appropriate statement waht i need to code for this.
insert kunnr name into zstable.
can i ignore the third field as it is not the key field?
3. before inserting do i need to check whether kunnr and uname is initial ie import parametrs?
4. suppose if i delcared two input parameters in function module zfuntion say vbeln and posnr.
and source code
insert vbeln and posnr into zstable.
now i am calling from the program
zreport.
call function 'ZFUNCTION'.
EXPORT
NAME =
KUNNR =
Will the above statement updates the blank records into the table zstable?.

Hi,
1) I think the best is either refer directly to data element or to table field. This is beacuse once any change is made to this data element it will automatically reflect in your parameters. For table fields it is a bit less safier but still correct. Golden rule - always try to refer to DDIC components like data elements.
name type dname
kunnr type kunnr
2) You need to provide all key fields. I recommend to use MODIFY as it would hanlde both INSERT (if yet no such record exists ) and UPDATE (if already exists).
data: wa_zstable type zstable. "declare work area
wa_zstable-kunnr = kunnr. "pass parameters here
wa_zstable-name = name.
modify zstable from wa_zstable.
3) good practise, for this use
if kunnr is initial and
   name is initial.
"modify ...
endif.
"or if parameters are set as OPTIONAL, then use
if kunnr is supplied and
   name is supplied.
endif.
4) No, the statment you want to use
insert vbeln and posnr into zstable.
is only used for FIELD GROUPS, not DB table. Please refer [INSERT|http://help.sap.com/abapdocu/en/ABAPINSERT_DBTAB_SHORTREF.htm] for correct syntax.
You can alternatively use somthing like
UPDATE zstable SET vbeln = ...
                                        posnr = ...
                                 WHERE ...
This will update fields VBELN and PONR for all records fullfilling WHERE condition. These however musn't be key fields, only non-key fields can be udpated.
Regards
Marcin

Constantly inserting into large table with unique index... Guidance?

Hello all;
So here is my world. We have central to our data monitoring system an oracle database running Oracle Standard One (please don't laugh... I understand it is comical) licensing.
This DB is about 1.7 TB of small record data.
One table in particular (the raw incoming data, 350gb, 8 billion rows, just in the table) is fed millions of rows each day in real time by two to three main "data collectors" or what have you. Data must be available in this table "as fast as possible" once it is received.
This table has 6 columns (one varchar usually empty, a few numerics including a source id, a timestamp and a create time).
The data is collect in chronological order (increasing timestamp) 90% of the time (though sometimes the timestamp may be very old and catch up to current). The other 10% of the time the data can be out of order according to the timestamp.
This table has two indexes, unique (sourceid, timestamp), and a non unique (create time). (FYI, this used to be an IOT until we had to add the second index on create time, at which point a secondary index on create time slowed the IOT to a crawl)
About 80% of this data is removed after it ages beyond 3 months; 20% is retained as "special" long term data (customer pays for longer raw source retention). The data is removed using delete statements. This table is never (99.99% of the time) updated. The indexes are not rebuilt... ever... as a rebuild is about a 20+ hour process, and without online rebuilds since we are standard one, this is just not possible.
Now what we are observing is that the inserts into this table
- Inserts are much slower based on a "wider" cardinality of the "sourceid" of the data being inserted. What I mean is that 10,000 inserts for 10,000 sourceid (regardless of timestamp) is MUCH, MUCH slower than 10,000 inserts for a single sourceid. This makes sense to me, as I understand it that oracle must inspect more branches of the index for uniqueness, and more different physical blocks will be used to store the new index data. There are about 2 million unique sourceId across our system.
- Over time, oracle is requesting more and more ram to satisfy these inserts in a timely matter. My understanding here is that oracle is attempting to hold the leafs of these indexes perpetually buffers. Our system does have a 99% cache hit rate. However, we are seeing oracle requiring roughly 10GB extra ram per quarter to 6 months; we're at about 50gb of ram just for oracle already.
- If I emulate our production load on a brand new, empty table / indexes, performance is easily 10x to 20x faster than what I see when I do the same tests with the large production copies of data.
We have the following assumption: Partitioning this table based on good logical grouping of sourceid, and then timestamp, will help reduce the work required by oracle to verify uniqueness of data, reducing the amount of data that must be cached by oracle, and allow us to handle our "older than 3 month" at a partition level, greatly reducing table and index fragmentation.
Based on our hardware, its going to be about a million dollar hit to upgrade to Enterprise (with partitioning), plus a couple hundred thousand a year in support. Currently I think we pay a whopping 5 grand a year in support, if that, total oracle costs. This is going to be a huge pill for our company to swallow.
What I am looking for guidance / help on, should we really expect partitioning to make a difference here? I want to get that 10x performance difference back we see between a fresh empty system, and our current production system. I also want to limit oracles 10gb / quarter growing need for more buffer cache (the cardinality of sourceid does NOT grow by that much per quarter... maybe 1000s per quarter, out of 2 million).
Also, please I'd appreciate it if there were no mocking comments about using standard one up to this point :) I know it is risky and insane and maybe more than a bit silly, but we make due with what we have. And all the credit in the world to oracle that their "entry" level system has been able to handle everything we've thrown at it so far! :)
Alright all, thank you very much for listening, and I look forward to hear the opinions of the experts.

Hello,
Here is a link to a blog article that will give you the right questions and answers which apply to your case:
http://jonathanlewis.wordpress.com/?s=delete+90%25
As far as you are deleting 80% of your data (old data) based on a timestamp, then don't think at all about using the direct path insert /*+ append */ as suggested by one of the contributors to this thread. The direct path load will not re-use any free space made by the delete. You have two indexes:
(a) unique index (sourceid, timestamp)
(b) index(create time)
Your delete logic (based on arrival time) will smatch your indexes as far as you are always deleting the left hand side of the index; it means you will have what we call a right hand index - In other words, the scattering of the index key per leaf block is certainly catastrophic (there is an oracle iternal function named sys_op_lidbid that will allow you to verify this index information). There is a fairly chance that your two indexes will benefit from a coalesce as already suggested:
           ALTER INDEX indexname COALESCE;This coalesce should be investigated to be done on a regular basis (may be after each 80% delete) You seem to have several sourceid for one timestamp. If the answer is yes you should think about compressing this index
    create index indexname (sourceid, timestamp) compress;
or
    alter index indexname rebuild compress;     You will do it only once. Your index will have a smaller size and may be more efficient than it is actually. The index compression will add an extra CPU work during an insert but it might help improving the overal insert process.
Best Regards
Mohamed Houri

Whenever I enter a number in Notes such as a serial number, it turns into a hyperlink. If I click on it to copy it, it calls as if a phone

Whenever I enter a number in Notes such as a serial number, it turns into a hyperlink. If I click on it to copy it, it calls as if a phone

There is no way to prevent this behavior short of changing how you format the numbers in your document. The iPhone detects sequences of numbers to make them easy to dial as a phone number. If you need it select these numbers to do something else with then (such as copy to the clipboard), just hold your finger on the number until the contextual menu appears.
Are you using an older version of iOS? Some older versions, under certain conditions, would automatically dial a number that you tapped rather than asking you if you want to dial it.

Insert into Oracle Database using C#

Hi Everyone,
I am trying to take data from text box and list box and then insert them to Oracle database:
Text box data:
Oracle = EMPLOYEE_NAME
C# = tbEmployeeName
List box data:
Oracle = EMPLOYEE_GENDER
C# = lbEmployeeGender
Here is my code in C#, can you guys help me with insert statement:
string oradb = "Data Source= oraDB;User Id=sm;Password=mypassword;";
OracleConnection conn = new OracleConnection(oradb);
conn.Open();
OracleCommand cmd = new OracleCommand();
cmd.Connection = conn;
cmd.CommandText = "Insert into USER.EMPLOYEE VALUES (tbEmployeeName.Text, lbEmployeeGender.Text)";
int rowsUpdated = cmd.ExecuteNonQuery();
if (rowsUpdated == 0)
MessageBox.Show("Record not inserted");
else
MessageBox.Show("Success!");
conn.Dispose();
Thanks!

989630 wrote:
Hi Everyone,
I am trying to take data from text box and list box and then insert them to Oracle database:
Text box data:
Oracle = EMPLOYEE_NAME
C# = tbEmployeeName
List box data:
Oracle = EMPLOYEE_GENDER
C# = lbEmployeeGender
Here is my code in C#, can you guys help me with insert statement:
string oradb = "Data Source= oraDB;User Id=sm;Password=mypassword;";
OracleConnection conn = new OracleConnection(oradb);
conn.Open();
OracleCommand cmd = new OracleCommand();
cmd.Connection = conn;
cmd.CommandText = "Insert into USER.EMPLOYEE VALUES (tbEmployeeName.Text, lbEmployeeGender.Text)";
int rowsUpdated = cmd.ExecuteNonQuery();
if (rowsUpdated == 0)
MessageBox.Show("Record not inserted");
else
MessageBox.Show("Success!");
conn.Dispose();
Thanks!Hi,
You'll want to read up on using parameters (also known as bind variables) - these are critical for scalability in an OLTP-type system and helping guard against SQL Injection attacks. There's many sources out there, but here's a link to the Parameter Binding section in the ODP.NET Developer's Guide which is probably a good thing to become familiar with:
http://docs.oracle.com/cd/E11882_01/win.112/e23174/featOraCommand.htm#i1007242
Here's your sample using bind variables:
string oradb = "Data Source= oraDB;User Id=sm;Password=mypassword;";
OracleConnection conn = new OracleConnection(oradb);
conn.Open();
OracleCommand cmd = new OracleCommand();
cmd.Connection = conn;
// Perform insert using parameters (bind variables)
cmd.CommandText = "Insert into USER.EMPLOYEE VALUES (:1, :2)";
// Here's one way to use parameters aka bind variables:
// Create parameters to hold values from front-end
cmd.Parameters.Add(new OracleParameter("1",
                                       OracleDbType.Varchar2,
                                       tbEmployeeName.Text,
                                       ParameterDirection.Input));
cmd.Parameters.Add(new OracleParameter("2",
                                       OracleDbType.Varchar2,
                                       lbEmployeeGender.Text,
                                       ParameterDirection.Input));
int rowsUpdated = cmd.ExecuteNonQuery();
if (rowsUpdated == 0)
MessageBox.Show("Record not inserted");
else
MessageBox.Show("Success!");
conn.Dispose();
// don't forget to perform any clean-up as necessaryNote that I've just typed this into a text editor and not verified, so please excuse any typos you may find.
Also, I've allowed the default of OracleCommand.BindByName=false as I prefer that, though others certainly prefer setting it to "true". See the docs for what this means if you are not sure.
Regards,
Mark

Servlet not inserting into Access Databse. help please

I have the following code which is inserting three fields into a database. The database name is contacts.mdb, and the table is contacts. I have setup the ODBC connection on the server, of which I have both IIS and Tomcat running. The form.html that I am accessing is on the tomcat server root and that code is below as well. After hitting the submit button on the form I get forwarded to the servlet, and the page is blank. However, when I open the database, no updates have occured. Please help. I hope I have provided enough detail. Thanks so much.
-------- servlet code start --------------
import java.sql.*;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class WebServlet
extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException,
IOException {
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
String sourceURL = "jdbc:odbc:terry_web_contacts";
Connection databaseConnection = DriverManager.getConnection(sourceURL);
Statement stmt = databaseConnection.createStatement();
String jname = request.getParameter("Name");
String jemail = request.getParameter("Email");
String jcomments = request.getParameter("Comments");
String sqlInsertString ="INSERT INTO contacts (name, email, comments) VALUES ('" + jname +"', '" jemail "', '" + jcomments + "')";
stmt.executeUpdate(sqlInsertString);
databaseConnection.close();
catch(ClassNotFoundException cnfe)
System.err.println("Error loading Driver");
catch (SQLException sqle){
System.err.println("SQL Error");
---------- servlet code end ---------------------
---------- html form code start ------------------
<HTML>
<HEAD>
<TITLE>Example</TITLE>
</HEAD>
<BODY BGCOLOR="WHITE">
<TABLE BORDER="2" CELLPADDING="2">
<TR><TD WIDTH="275">
<H2>I'm a Simple Form</H2>
<FORM METHOD="POST" ACTION="/servlet/WebServlet">
<p>
<INPUT NAME="Name" TYPE="TEXT" id="Name" SIZE=30>
</p>
<p>
<INPUT NAME="Email" TYPE="TEXT" id="Email" SIZE=30>
</p>
<p>
<textarea name="Comments" id="Comments"></textarea>
</p>
<P>
<INPUT TYPE="SUBMIT" VALUE="Click Me">
<INPUT TYPE="RESET">
</FORM>
</TD></TR>
</TABLE>
</BODY>
</HTML>
------------- html code end ------------------

Okay, here is my modified code. However, I catch a sql error. It prints out "sql error". If I try to isolate the different lines of code with try catch blocks, the compiler says it does not recognize the symbols for example stmt, or databaseConnection. Arggh, what can I do? Help please.
import java.sql.*;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class WebServlet
    extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response)
     throws ServletException,IOException
     PrintWriter out = response.getWriter();
     String jname = (String) request.getParameter("Name");
     String jemail = (String) request.getParameter("Email");
     String jcomments = (String) request.getParameter("Comments");
try
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(ClassNotFoundException e)
     out.println("class error");
try
     Connection databaseConnection = DriverManager.getConnection("jdbc:odbc:terrycontacts");
     Statement stmt = databaseConnection.createStatement();
     String sqlInsertString ="INSERT INTO contacts(name,email,comments) VALUES('"+jname+"','"+jemail+"','"+jcomments+"')";
     stmt.executeQuery(sqlInsertString);
     databaseConnection.commit();
     databaseConnection.close();
catch(SQLException e)
     out.println("sql error");
     out.close();
}

Safari will not load pages after logging into certain sites

Mac OS X 10.4.11, Safari 3.1 running on a Power Macintosh G4 "Quicksilver" 2002. All software updates are installed.
After I log into certain web sites (Apple Support Discussions being one of them), Safari simply stops loading pages. It will "try" briefly but each page comes up blank. In fact, they don't even appear to download.
This has been going on for a while now. I can't even remember when it started. I have done fresh installations of Mac OS X on to a clean disk to try and solve the problem. This has not resulted in any improvement. I am not using any extensions or modifiers.
As an experiment, I've tried a few Webkit Nightly Builds. Those did not work any better.
On some sites, such as eBay, Safari will put an empty file on the desktop. eBay is a prime example--after I sign in, an empty file called eBayIsapi.dll appears on the desktop.
Seemingly this has been reported other places. What I didn't find was a fix. Is there anything that can be done to resolve this problem?

I've just given up after several versions of Safari doing the same thing. It seems to be a bad interaction with Websense web filtering blocking some things that Safari expects to be able to download and process.
I don't even use Safari any more because of this.

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you

Creating a button for inserting into a table

What I can't do, because I've never needed to, is to create in a page (where I have a Interactive report) a button that when is clicked performs a simple sql (for example an insert into a table using some page item values).
How can I do it?
Thanks

Here are some of the steps:
1) Create the button.
2) Then right click on the button name and select Create Dynamic Action
3) Give the DA a name, click next
4) On the "When" Step, Event should already be "Click" and the button name should be filled in
5) For Condition, you would have a condition for when you want the button display. Say, if your page items have a certain range of values then display this button. No condition means the button is always displayed.
6) For the "True Action" Step, for Action select "Execute PL/SQL Code"
    [There are other ways to do this, but this is straight-forward for me.]
7) The in the PL/SQL Code block enter say:
Begin
INSERT INTO EMP (EMPNO, ENAME, HIREDATE)
          VALUES (:P6_EMPNO, 'MARK1970', :P6_HIREDATE);
COMMIT;
END;   --- You would likely make them all page item variables
8) Here the part I'm not 100% sure of.
    For "Page Items to Submit", name the page items used in YOUR QUERY -- in my example these are P6_EMPNO,P6_HIREDATE   (Note no use of & or : or . here)
    Hmm. Start by putting nothing in the "Page Items to Return".   If that fails, then try the same page items P6_EMPNO,P6_HIREDATE there as well.
[ I'm too lazy to go run this down at the moment.]
9) I think that's it.
Howard

Blanks inserted into certain hyperlinks

Similar Messages

Maybe you are looking for