Bleed boundary question

I have a multipage document with spreads (facing pages). The document is showing the bleed boundary, although, in the Document Presets, all four bleed values are zero (and I have no bleeds in the document). It is only displayed in this one document. If I create a new document with the same Document Presets, the bleed boundary is not displayed.
I don't see this as a big issue, but I am curious as to why it is displayed in only one document, and why it is displayed at all, when the settings are all zero.
Does anyone have any ideas?
I searched this forum but I didn't find any relevant posts.
My computer is a Dell Inspiron 6000 with a 1.5 GHz pentium M processor, 2 GB of RAM, and Win XP/Pro SP3

Presets only define the starting condition. You can add or remove the bleeds at any time (even during file creation using a preset) by opeing the document setup dialog.

Similar Messages

AD Site / IP Range Boundary Question

We have one small office that is included in our primary AD Site and this will not change. This site has its own boundary and DP's.
I am creating a DP for that office and am wondering how I can ensure that this office will exclusively use that DP once it is deployed.
I can create an IP Range boundary for that office, but it will overlap with what is in the AD site. I think this should be something simple that I am overlooking.
Thanks In Advance
Kev

Hi,
Have a read on this,
http://it.peikkoluola.net/2013/10/29/designing-boundaries-and-overlapping-boundaries-in-sccm-2012/
Regards,
Hau

I have set a bleed area that may need changing - how?

Hi. Hope this is not too confusing - My book will finish at 210x257mm.
Printer stipulated 1 page - 216x263mm including 3mm bleeding four sides.
2 pages together, 426x263mm including bleeding
New at this, I have a red, black and pink line. Is the Pink line the cut off line. (not sure what the red line is)
I have extended my bleed photos to the black line - the part from there to the pink line will be the cutoff ?
From the outside blackline to inside black line the measurement is 216mm. Top black to bottom black line 263mm.
"2 pages together , 426 x263mm including bleeding" - mine over the 2 pages outside black line to outside black line at present is 432mm x 263mm - I assume that maybe 2 x 3mm bleed in centre? (i.e. pink to pink line = 6mm)
Bit confused here because Printer says 3mm bleeding four sides which includes the centre for 1 page which I have set up
If I need to change something in the Layout how do I do it part way through a Document?
I hope this is not too confusing but would really appreciate some A-Z help before I go any further.

In document setup you should have facing pages checked, and the page dimension should be 210 mm wide and 257 mm high. In the bleed setup fields enter 3mm for all (but see InDesignSecrets » Blog Archive » Breaking Pages Apart to Bleed Off a Spine) if you have any artwork that dies into the spine (crossovers will be fine as-is). The bleed at the spine on a facing pages spread (unless it is split apart) is the edge of the opposite page.
This should give you a red line around the outside tha is the bleed boundary, a black line that is the page boundary, and a magenta (or pinkish) line inside the page that is the margins you've set, which you didn't specify so I can't tell you what to enter.

Question regarding bleeding and facing pages.

Hello,
i'm in trouble with my first InDesign document which is a 96 pages Magazine. It will be printed on A3 sheets stapled in the middle. My printing guy said that it's ok as A4 pages with 3mm bleed.
So now when i'm trying to export as a printed pdf (i check mark that i want to use the documents bleeding settings) it exports with sections from left and right depending on the pages (the left page exports with ?? i guess 3 mm ?? bleed from the right page and so on). If i override the bleeding settings and i set it to 0mm it all ok but i fear that some pictures or text might get cut off since i have all planned with the bleed markers in indesign.
And i can't uncheck the facing pages since i have some graphics (charts and so on) that spread from one page to another (on same spread).
My question is ... is there anything i can do and still use bleeds or (ignore "inside bleeds" or something) or is it ok to use the export as spreadsheet instead of individual pages since he wanted A4 pages?
Any help for a newbie would be appreciated. Thank you.

You should ask the printers to use PUR (polyurethane reactive) Bind when making a perfect bound book - that's a much stronger glue than EVA. It won't even break apart or fall apart going from freezing cold (out in the car over night) to being warmed up, which happens with EVA binding. But the PUR bind seems to be a lot more popular and stronger.
Failing that, getting the book threadsewn also helps to keep pages together. If you have a large print run and need these to last, then I suggest perfect binding them with a threadsewn finish.
I've definitely seen and done 96pp saddle stitched (well personally I have imposed, printed and delivered these). You might have to sacrafice a drop in weight on the body text. It can get ugly, but it's definitely doable.
My suggestion here would be to ask the printers for a similiar 96pp saddle stitch sample that they've done before, to make sure you're happy with it.
In fact, you can ask them to send you out a dummy (a blank version of the book trimmed and folded) to make sure you're happy with it.
It really is disppointing to get a printed job back from the printers and you discover you are not happy with the binding method.

Bleed question

I hope someone can shed some light on this problem. I'm placing a dotted border on an image. The dotted border will frame the image.
My question is: how does one create a bleed for a line of dots (dot size is about 3 pts)? The line of dots will butt up against the outer frame of the image, and I'm afraid that in production, if registration is even slightly off, the dots will get cut off.
I've tried to duplicate the dot layer and enlarge it by 1%. But in doing so the dots don't just bleed off the page (which is what I'm after) -- they get larger and are offset a tiny bit.
Is there anything else I can do? Any input on this would be much appreciated.
Thanks in advance.

Many thanks for your reply, Sandee. I appreciate your comments but I know what bleeds are for. In this case, I sensed that this would be a challenge because what I want, perhaps unreasonably, is for the dots to be lined up on the border *and* for them not to be cut off.
I'm aware that the easiest thing would be to place the dots all the way inside the safety zone, but that's not the look I'm after.
So here's the solution I came up with after much experimentation -- and it's similar to what you suggest in terms of bleeding the dots off the page. The difficulty was in figuring out the steps to do this.
I created 4 lines of dots and superimposed them, each one a little offset from the other. (so that, in reality, the "amalgam" dot is no longer round but oblong. But that's okay because it suits my purpose, the oblong part will be hidden in the bleed area.) Grouped them and lined up the group on the border so that I have about 3/4 of the grouped dot inside and 1/4 outside. This may be cumbersome but it allows me to achieve the look I have in mind.
By the way, I'm a bit surprised to read that you never heard of such a thing. Let me assure you that designers come up with such issues all the time. So that if there's a simpler way of going about this, I'd love to hear it.

Prepress question - marking bleeds

I work for a vendor to a publishing firm, and recently had been asked to resubmit some printer files for a book to fix the bleeds for the gutter. The note I got was " there are no bleeds on the gutter - bleeds should extend to 1/8" past the trim."
Now, there are no images bleeding in the gutter (although the running head rules do get close, and frankly its odd the designer didn't bleed them into the gutter), and previous books in the series were submitted without gutter bleeds marked--in fact, the publisher's Acrobat printing specs have no bleed marks being printed to the PDFs going to the printer.
So my question is, do InDesign's bleed specs somehow get passed along to the PDF without marks being printed, and this is what the printer is checking on? Or might it be that the printer assumed the funky running heads are a mistake and are supposed to bleed?
Or is there something I'm missing here about bleeds....
(Unfortunately, there's no way for me to contact the vendor. Theres an editor at the vendor and one or two production people at the publishing company between us. The issue is apparently resolved given I added an interior bleed spec in Indesign, reoutput the PDFs (with no bleed marks) and no ones asked for any more files)
Thanks for your help/thoughts!
Megan

i'd agree with bob in the most part that bleeds in the gutter should be zero... UNLESS the book is one where, when the pages are as spreads, have a space between them, such as wiro, coil, comb or ring bound books. in these circumstances, art which goes to the trim edge must bleed off the edge including the gutters.
so, using the above example, bleeds in gutters would be an issue if artwork on a left hand page had artwork going to the trim edge of the gutter, but not on the right hand side. on a wiro bound book, the left hand page would need the artwork to bleed all around, but practically in indesign that results in the "bled" artwork showing up on the right hand page, and that presents an issue. see this article on indesignsecrets for how to deal with this:
http://indesignsecrets.com/breaking-pages-apart-to-bleed-off-a-spine.php
bleed is any instance where artwork extends past the trim area to aid in trimming of the artwork to size. bleed marks indicate where user-defined bleed should stop, but in my opinion unnecessary as trim marks are more important.

Security question prompt bleeds out of box, can't read it., Security question prompt bleeds out of box, can't read it.

I'm having a bit of a problem entering my id and password, and I'm invoking the security questions. I have two. And the second is so long it does not completely appear in my iPhone (4S) question box. I've forgotten what the question might be so I can't even guess as to the answer. Any ideas how to see the whole question? I tried turning the display but the bounding box does not enlarge. Thanks

Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password.
Go to the Password & Security section. You will be shown two of your three security questions. Answer them correctly, and you'll have access to that sub-page, where you can choose new security questions and answers.

Basic printing questions with safe zones, trim lines and bleeds

I am working with a file that has safe zones, trim lines and bleeds. If I place something that touches the outer edges of the document at the bleed zone, how will it display if there is a trim line before it? Won't it be trimmed anyways?
Thanks.

Consider the bleed a precautionary measure in the case of registration variance when cutting the actual printed product.
So it should be cut off, but it may actually become visible (partially).

Two Page/Bleed Spread? InDesign Newbie question

Hello,
I am hoping you can lead me in the right direction, I have a quick (probably basic) question that I can't figure out! I am new to InDesign and am trying to figure out the best way possible to have one image go across the span of two pages, with a .5in border around it. I already have the border and everything all set, but I am having issues getting my image to "stretch" properly and stay in proportion so there is no distortion. I know how to do fit to frame, but the problem is that the frame that I am creating spans both pages and therefore it does not keep proportions correct. If I do fit to frame proportionally it will just put the image on one page instead of two.
Also, I am curious what the best way is to do this so that I can account for gutter space and do not loose part of my image in the fold of the book. Can you help? Thanks so much in advance!!
Phil Spiegel

Use fill frame proportionally in the fitting options.
If it's a photo, make sure you have a enough image date. Check the
effective resolution in the info panel.
Bob

Basic bleed question

I'm designing a simple flyer that will be printed (I have little experience in the print world) and it might need to bleed to the edges, though I'm waiting to hear back from the person I'm designing it for.
1. If it does bleed to the edges, do I only need to make sure that the artwork on my artboard touches the edges of my artboard? OR is there something else that needs to be done?
Thanks.

You artwork should go beyond the edges of your artboard to allow some wiggle room for trimming.
Like so:
When saving as a .pdf, go to the Marks and Bleed options. Here you can set the desired bleed measurement (specified by your printer). I've included crop marks to further illustrate the result.
Here I have the document open in Acrobat, so you can see how the file exported. The trim marks line up with the artboard of your original document, so when the flyer is trimmed down your artwork will go all the way to the edge, even if the trim is slightly off.
For more information, check out this link:
Forum discussion: http://forums.adobe.com/message/2742531
Good luck!
(EDIT: I took off one of the links because, after closer inspection, I didn't think the instructions were best practice.)

Follow up on 4x6 Question

Thanks again Beverly, your suggestions solved my print problem. However, the picture was slightly cropped at the top and it also had 2 very small borders on the left and right, being printed in landscape.
In Page Set Up I wanted a vertical print not a landscape print. In PSU I highlighted the verticle icon. Are these two items more to do with iPhoto itself or the printer instructions? I have a new Epson CX6000 printer. Their manual does not address the problem that you answered. I have an email into them, but who knows when they will answer.
An Addendum to the previous Post: The Print window does not show paper as an option per se. The paper option appears under Presets. Photos per page doesn't show, perhaps because I only want to print one picture.
Thanks again for the help
John

Hi, John. I can address one of your questions here.
However, the picture was slightly cropped at the top and it also had 2 very small borders on the left and right, being printed in landscape.
A standard digital camera image is proportioned 4:3 (1.33:1). That doesn't match the 6:4 ratio of your paper's dimensions (1.5:1), so unless you opt either to distort the image or crop it, it can't be an exact fit on the paper.
In the toolbar at the top of iPhoto's Edit view is a pull-down menu above the word "Constrain". You use that menu to specify standard proportions for printing the image. Select "4x6 (Postcard)", and you will see superimposed on the picture a rectangle that has those proportions. What's inside the rectangle looks normal, signifying that it will be printed; what's outside the rectangle is pale and muted, because it will be cropped away when you print. Place your cursor anywhere inside the rectangle, hold the mouse button down and drag, to move the rectangle and change what's included within the print boundary.
The fact that your printed picture was both cropped and slightly reduced in size (creating the small left and right borders) suggests to me that your printer may not be capable of borderless printing, or that there is a setting for borderless prints you're overlooking somewhere. Since the contents of both the Print and Page Setup dialog boxes are governed by the printer's own driver software, and there's no "borderless" setting anywhere within iPhoto, I think you'll need to review the printer's documentation and/or online help files carefully to see whether you're overlooking something in one of those dialog boxes.

Follow-up question on BOM production and consumption of same item

Awhile back, I asked the question about whether it made sense to have a BOM structured to simultaneously produce and consume an item. BOM that needs to produce and consume same component
Thanks for the help and it does what I thought it should. We have a local difference of opinion on the consumption of primary components, though. To attempt to ensure that we account for the bleed-off of materials into a vacuum system, we set up a BOM like this
Material A    498.379
Material B    332.253
Material C     14.914
Material D     22.371
Material E     64.317
Material F    103.570
Material F     -35.804 (This is the quantity vacuumed away, treated as by-product.)
to cover a recipe card structured like this
Material A    481.150
Material B    320.775
Material C     14.400
Material D     21.600
Material E     62.100
Material F     100.00
The difference of opinion is whether to recognize the reclaimed material (Material F) at all on the BOM, with a minority saying that we will not consume (and therefore not order) enough of materials A through E. They say that "you have to put the same amount of good ingredients in as you produce because it's a closed loop system".
So the other approach would be a BOM like this
Material A    534.252
Material B    357.852
Material C     15.840
Material D     23.760
Material E     68.310
The material reclaimed (Material F) is sourced not only from this particular vacuum system, but from other vacuum systems outside the blending operation.
It seems to me that the first approach is correct, because we recognize consumption and production of the reclaimed item, and proportionately increase the component items to recognize that more are needed than will go out as good product. Even the reclaim becomes reclaim. The amounts vacuumed off seem to be consistent at 3.57%.
Which approach is correct?

Thank you for the reply. The reclaimed material can be as much as 11% of the total material made. Last year, over one million kilograms were worked back into the product as reclaim, and the metals are somewhat expensive (not like precious metals, but they are not trivial, either).
Accuracy versus precision is always something to consider, but I think it's important enough to follow, especially because it is sourced from several processes. The sourcing from the other sources means that the reclaimed material from those sources has already been reported as production of the primary product which consumes the virgin materials, so I think it should be re-introduced into the flow as a separate item (Material F)
The primary argument I want to settle is the business about how we won't order enough component materials if we use the BOM that shows simultaneous production and consumption. I think under the approach in which we ignore the reclaim, we will consume more components from the backflush location than we physically use and would then order too much material because of using a BOM that pulls only virgin materials.

Please answer these questions.....Urgent

Q You are using Data Guard to ensure high availability. The directory structures on the primary and the standby hosts are different.
Referring to the scenario above, what initialization parameter do you set up during configuration of the standby database?
db_convert_dir_name
db_convert_file_name
db_dir_name_convert
db_directory_convert
db_file_name_convert
Oracle 9i Administration, Question 1 of 12
Q What facility does Oracle provide to detect chained and migrated rows after the proper tables have been created?
The RDBMS cannot detect this. It must use regular export and import with compress=y to remove chained and migrated rows as part of the regular database.
The UTLCHAIN utility
The DBMS_REPAIR package
The ANALYZE command with the LIST CHAINED ROWS option
The DBMS_MIG_CHAIN built-in package
Q While doing an export, the following is encountered:
ORA-1628 ... max # extents ... reached for rollback segment ..
Referring to the scenario above, what do you do differently so that the export is resumed even after getting the space allocation error?
Use the RESUMABLE=Y option for the export.
Run the export with the AUTO_ROLLBACK_EXTEND=Y option.
Increase the rollback segment extents before running the export.
Use THE RESUME=Y option for the export.
Monitor the rollback segment usage while the export is running and increase it if it appears to be running out of space.
Q
The DBCA (Database Configuration Assistant) prompts the installer to enter the password for which default users?
SYS and SYSTEM
OSDBA and INTERNAL
SYSOPER and INTERNAL
SYS and INTERNAL
SYSTEM and SYSDBA
Q You are designing the physical database for an application that stores dates and times. This will be accessed by users from all over the world in different time zones. Each user needs to see the time in his or her time zone.
Referring to the scenario above, what Oracle data type do you use to facilitate this requirement?
DATE
TIMESTAMP WITH TIME ZONE
TIMESTAMP
DATETIME
TIMESTAMP WITH LOCAL TIME ZONE
Q Which one of the following conditions prevents you from redefining a table online?
The table has a composite primary key.
The table is partitioned by range.
The table's organization is index-organized.
The table has materialized views defined on it.
The table contains columns of data type LOB.
Q An Oracle database administrator is upgrading from Oracle 8.1.7 to Oracle 9i.
Referring to the scenario above, which one of the following scripts does the Oracle database administrator run after verifying all steps in the upgrade checklist?
u8.1.7.sql
u81700.sql
u0900020.sql
u0801070.sql
u0817000.sql
Q What command do you use to drop a temporary tablespace and the associated OS files?
ALTER DATABASE TEMPFILE '/data/oracle/temp01.dbf' DROP;
ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP;
ALTER DATABASE TEMPFILE '/data/oracle/temp01.dbf' DROP INCLUDING DATAFILES;
ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP CASCADE;
ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP INCLUDING CONTEN
Q You wish to use a graphical interface to manage database locks and to identify blocking locks.
Referring to the scenario above, what DBA product does Oracle offer that provides this functionality?
Oracle Expert, a tool in the Oracle Enterprise Manager product
Lock Manager, a tool in the base Oracle Enterprise Manager (OEM) product, as well as the console
Lock Manager, a tool in Oracle Enterprise Manager's Tuning Pack
The console of Oracle Enterprise Manager
Viewing the Lock Manager charts of the Oracle Performance Manager, a tool in the Diagnostics Pack add on
Q CREATE DATABASE abc
MAXLOGFILES 5
MAXLOGMEMBERS 5
MAXDATAFILES 20
MAXLOGHISTORY 100
Referring to the code segment above, how do you change the MAX parameters shown?
They can be changed using an ALTER SYSTEM command, but the database must be in the NOMOUNT state.
The MAX parameters cannot be changed without exporting the entire database, re-creating it, and importing.
They can be changed using an ALTER SYSTEM command while the database is open.
They can be changed in the init.ora file, but the database must be restarted for the values to take effect.
They cannot be changed unless you re-create your control file
Q You need to change the archivelog mode of an Oracle database.
Referring to the scenario above, what steps do you take before actually changing the archivelog mode?
Execute the archive log list command
Start up the instance and mount the database but do not open it.
Start up the instance and mount and open the database in restricted mode.
Kill all user sessions to ensure that there is no database activity that might trigger redolog activity.
Take all tablespaces offline
Q You are experiencing performance problems due to network traffic. One way to tune this is by setting the SDU size.
Referring to the scenario above, why do you change the SDU size?
A high-speed network is available where the data transmission effect is negligible.
The application can be tuned to account for the delays.
The requests to the database return small amounts of data as in an OLTP system.
The data coming back from the server are fragmented into several packets.
A large number of users are logged on concurrently to the system.
Q When interpreting statistics from the v$sysstat, what factor do you need to keep in mind that can skew your statistics?
Choice 1 The statistics are static and must be updated by running the analyze command to include the most recent activity.
Choice 2 The statistics are only valid as a point in time snapshot of activity.
Choice 3 The statistics gathered by v$sysstat include database startup activities and database activity that initially populates the database buffer cache and shared pool.
Choice 4 The statistics do not include administrative users.
Choice 5 The statistics gathered are based on individual sessions, so you must interpret them based on the activity and application in which the user was involved at the time you pull the statistics.
Q When interpreting statistics from the v$sysstat, what factor do you need to keep in mind that can skew your statistics?
Choice 1 The statistics are static and must be updated by running the analyze command to include the most recent activity.
Choice 2 The statistics are only valid as a point in time snapshot of activity.
Choice 3 The statistics gathered by v$sysstat include database startup activities and database activity that initially populates the database buffer cache and shared pool.
Choice 4 The statistics do not include administrative users.
Choice 5 The statistics gathered are based on individual sessions, so you must interpret them based on the activity and application in which the user was involved at the time you pull the statistics.
Q You want to shut down the database, but you do not want client connections to lose any non-committed work. You also do not want to wait for every open session to disconnect.
Referring to the scenario above, what method do you use to shut down the database?
Choice 1 Shutdown abort
Choice 2 Shutdown immediate
Choice 3 Shutdown transactional
Choice 4 Shutdown restricted sessions
Choice 5 Shutdown normal
Q What step or steps do you take to enable Automatic Undo Management (AUM)?
Choice 1 Create the UNDO tablespace, then ALTER SYSTEM SET AUTO_UNDO.
Choice 2 Use ALTER SYSTEM SET AUTO_UNDO; parameter.
Choice 3 Add UNDO_MANAGEMENT=AUTO parameter to init.ora, stop/start the database.
Choice 4 Add UNDO_AUTO to parameter to init.ora, stop/start the database, and create the UNDO tablespace.
Choice 5 Add UNDO_MANAGEMENT=AUTO parameter to init.ora, create the UNDO tablespace, stop/start the database
AUTOMATIC UNDO PARAMETER SETTINGS.
Q What Oracle 9i feature allows the database administrator to create tablespaces, datafiles, and log groups WITHOUT specifying physical filenames?
Choice 1 Dynamic SGA
Choice 2 Advanced Replication
Choice 3 Data Guard
Choice 4 Oracle Managed Files
Choice 5 External Tables
Q What Oracle 9i feature allows the database administrator to create tablespaces, datafiles, and log groups WITHOUT specifying physical filenames?
Choice 1 Dynamic SGA
Choice 2 Advanced Replication
Choice 3 Data Guard
Choice 4 Oracle Managed Files
Choice 5 External Tables
Q What package is used to specify audit requirements for a given table?
Choice 1 DBMS_TRACE
Choice 2 DBMS_FGA
Choice 3 DBMS_AUDIT
Choice 4 DBMS_POLICY
Choice 5 DBMS_OBJECT_AUDIT
Q What facility does Oracle provide to detect chained and migrated rows after the proper tables have been created?
Choice 1 The ANALYZE command with the LIST CHAINED ROWS option
Choice 2 The RDBMS cannot detect this. It must use regular export and import with compress=y to remove chained and migrated rows as part of the regular database.
Choice 3 The DBMS_MIG_CHAIN built-in package
Choice 4 The DBMS_REPAIR package
Choice 5 The UTLCHAIN utility
Q What are the three functions of an undo segment?
Choice 1 Rolling back archived redo logs, database recovery, recording user trace information
Choice 2 The rollback segment has only one purpose, and that is to roll back transactions that are aborted.
Choice 3 Rolling back uncommitted transactions, maintaining read consistency, logging processed SQL statements
Choice 4 Rolling back transactions, maintaining read consistency, database recovery
Choice 5 Rolling back transactions, recording Data Manipulation Language (DML) statements processed against the database, recording Data Definition Language (DDL) statements processed against the database
Q Which one of the following describes locally managed tablespaces?
Choice 1 Tablespaces within a Recovery Manager (RMAN) repository
Choice 2 Tablespaces that are located on the primary server in a distributed database
Choice 3 Tablespaces that use bitmaps within their datafiles, rather than data dictionaries, to manage their extents
Choice 4 Tablespaces that are managed via object tables stored in the system tablespace
Choice 5 External tablespaces that are managed locally within an administrative repository serving an Oracle distributed database or Oracle Parallel Server
Q The schema in a database you are administering has a very complex and non-user friendly table and column naming system. You need a simplified schema interface to query and on which to report.
Which one of the following mechanisms do you use to meet the requirement stated in the above scenario?
Choice 1 Synonym
Choice 2 Stored procedure
Choice 3 Labels
Choice 4 Trigger
Choice 5
View
Q You need to change the archivelog mode of an Oracle database.
Referring to the scenario above, what steps do you take before actually changing the archivelog mode?
Choice 1 Start up the instance and mount the database but do not open it.
Choice 2 Execute the archive log list command
Choice 3 Kill all user sessions to ensure that there is no database activity that might trigger redolog activity.
Choice 4 Take all tablespaces offline.
Choice 5 Start up the instance and mount and open the database in restricted mode.
Q The Oracle Internet Directory debug log needs to be changed to show the following events information.
Given the Debug Event Types and their numeric values:
Starting and stopping of different threads. Process related. - 4
Detail level. Shows the spawned commands and the command-line arguments passed - 32
Operations being performed by configuration reader thread. Configuration refresh events. - 64
Actual configuration reading operations - 128
Operations being performed by scheduler thread in response to configuration refresh events, and so on - 256
What statement turns debug on for all of the above event types?
Choice 1 oidctl server=odisrv debug=4 debug=32 debug=64 debug=128 debug=256 start
Choice 2 oidctl server=odisrv debug="4,32,64,128,256" start
Choice 3 oidctl server=odisrv flags="debug=4 debug=32 debug=64 debug=128 debug=256" start
Choice 4 oidctl server=odisrv flags="debug=484" start
Choice 5 oidctl server=odisrv flags="debug=4,32,64,128,256" start
Q Which Data Guard mode has the lowest performance impact on the primary database?
Choice 1 Instant protection mode
Choice 2 Guaranteed protection mode
Choice 3 Rapid protection mode
Choice 4 Logfile protection mode
Choice 5 Delayed protection mode
Q In a DSS environment, the SALES data is kept for a rolling window of the past two years.
Referring to the scenario above, what type of partitioning do you use for this data?
Choice 1 Hash Partitioning
Choice 2 Range Partitioning
Choice 3 Equipartitioning
Choice 4 List Partitioning
Choice 5 Composite Partitioning
Q What are the three main areas of the SGA?
Choice 1 Log buffer, shared pool, database writer
Choice 2 Database buffer cache, shared pool, log buffer
Choice 3 Shared pool, SQL area, redo log buffer
Choice 4 Log writer, archive log, database buffer
Choice 5
Database buffer cache, log writer, shared pool
Q When performing full table scans, what happens to the blocks that are read into buffers?
Choice 1 They are put on the MRU end of the buffer list by default.
Choice 2 They are put on the MRU end of the buffer list if the NOCACHE clause was used while altering or creating the table.
Choice 3 They are read into the first free entry in the buffer list.
Choice 4 They are put on the LRU end of the buffer list if the CACHE clause was used while altering or creating the table.
Choice 5 They are put on the LRU end of the buffer list by default
Q Standard security policy is to force users to change their passwords the first time they log in to the Oracle database.
Referring to the scenario above, how do you enforce this policy?
Choice 1 Use the FORCE PASSWORD EXPIRE clause when the users are first created in the database.
Choice 2 Ask the users to follow the standards and trust them to do so.
Choice 3 Periodically compare the users' passwords with their initial password and generate a report of the users violating the standard.
Choice 4 Use the PASSWORD EXPIRE clause when the users are first created in the database.
Choice 5 Check the users' passwords after they first log in to see if they have changed it. If not, remind them to do so.
Q What object privilege is necessary for a foreign key constraint to be created and enforced on the referenced table?
Choice 1 References
Choice 2 Alter
Choice 3 Update
Choice 4 Resource
Choice 5 Select
Q What command do you use to drop a temporary tablespace and the associated OS files?
Choice 1 ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP INCLUDING CONTENTS
Choice 2 ALTER DATABASE TEMPFILE '/data/oracle/temp01.dbf' DROP INCLUDING DATAFILES;
Choice 3 ALTER DATABASE TEMPFILE '/data/oracle/temp01.dbf' DROP;
Choice 4 ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP;
Choice 5 ALTER DATABASE DATAFILE '/data/oracle/temp01.dbf' DROP CASCADE;
Q You need to implement a failover strategy using TAF. You do not have enough resources to ensure that your backup Oracle instance will be up and running in parallel with the primary.
Referring to the scenario above, what failover mode do you use?
Choice 1 FAILOVER_MODE=manual
Choice 2 FAILOVER_MODE=none
Choice 3 FAILOVER_MODE=auto
Choice 4 FAILOVER_MODE=basic
Choice 5 FAILOVER_MODE=preconnect
Q An Oracle database used for an OLTP application is encountering the "snapshot too old" error.
Referring to the scenario above, which database object or objects do you query in order to set the OPTIMAL parameter for the rollback segments?
Choice 1 V$ROLLNAME and V$ROLLSTAT
Choice 2 V$ROLLNAME
Choice 3 V$ROLLSTAT
Choice 4 DBA_ROLL and DBA_ROLLSTAT
Choice 5 DBA_ROLLBACK_SEG
QWhat are five background processes that must always be running in a functioning Oracle Instance?
Choice 1 SMON (system monitor), PMON (process monitor), RECO (recoverer process), ARCH (archive process), CKPT (checkpoint process)
Choice 2 DBW0 (database writer), SMON (system monitor), PMON (process monitor), LGWR (log writer), CKPT (checkpoint process)
Choice 3 DBW0 (database writer), SMON (system monitor), PMON (process monitor), D000 (Dispatcher process), CKPT (checkpoint process)
Choice 4 DBW0 (database writer), CKPT (checkpoint process), RECO (recoverer process), LGWR (log writer), ARCH (archive process)
Choice 5 DBW0 (database writer), LGWR (log writer), ARCH (archive process), CKPT (checkpoint process), RECO (recoverer process)
You have two large tables with thousands of rows. To select rows from the table_1, which are not referenced by an indexed common column (e.g. col_1) in table_2, you issue the following statement:
select * from table_1
where col_1 NOT in (select col_1 from table_2);
This statement is taking a very long time to return its result set.
Referring to the scenario above, which equivalent statement returns much faster?
Choice 1
select * from table_1
where not exists (select * from table_2)
Choice 2
select * from table_2
where col_1 not in (select col_1 from table_1)
Choice 3
select * from table_1
where col_1 in (select col_1 from table_2 where col_1 = table_1.col_1)
Choice 4
select * from table_1
where not exists (select 'x' from table_2 where col_1 = table_1.col_1)
Choice 5
select table_1.* from table_1, table_2
where table_1.col_1 = table_2.col_1 (+)
Performance is poor during peak transaction periods on a database you administer. You would like to view some statistics on areas such as LGWR (log writer) waits.
Referring to the scenario above, what performance view do you query to access these statistics?
Choice 1
DBA_CATALOG
Choice 2
V$SESS_IO
Choice 3
V$SYSSTAT
Choice 4
V$PQ_SYSSTAT
Choice 5
V$SQLAREA
You need to assess the performance of your shared pool at instance startup, but you cannot restart the database.
Referring to the scenario above, how do you empty your SGA?
Choice 1
Execute $ORACLE_HOME/bin/db_shpool_flush
Choice 2
ALTER SYSTEM FLUSH SHARED_POOL
Choice 3
ALTER SYSTEM CLEAR SHARED POOL
Choice 4
DELETE FROM SYS.V$SQLAREA
Choice 5
DELETE FROM SYS.V$SQLTEXT
You are reading the explain plan of a problem query and notice that full table scans are used with a HASH join.
Referring to the scenario above, in what instance is a HASH join beneficial?
Choice 1
When joining two small tables--neither having any primary keys or unique indexes
Choice 2
When no indexes are present
Choice 3
When using the parallel query option
Choice 4
When joining two tables where one table may be significantly larger than the other
Choice 5
Only when using the rule-based optimizer
An Oracle database administrator is upgrading from Oracle 8.1.7 to Oracle 9i.
Referring to the scenario above, which one of the following scripts does the Oracle database administrator run after verifying all steps in the upgrade checklist?
Choice 1
u0817000.sql
Choice 2
u0900020.sql
Choice 3
u8.1.7.sql
Choice 4
u81700.sql
Choice 5
u0801070.sql
You have a large On-Line Transaction Processing (OLTP) database running in archive log mode with two redo log groups that have two members each.
Referring to the above scenario, to avoid stalling during peak activity periods, which one of the following actions do you take?
Choice 1
Add a third member to each of the groups.
Choice 2
Increase your LOG_CHECKPOINT_INTERVAL setting.
Choice 3
Turn off archive logging.
Choice 4
Add a third redo log group.
Choice 5
Turn off redo log multiplexing
What object does a database administrator create to store precompiled summary data?
Choice 1
Replicated Table
Choice 2
Archive Log
Choice 3
Temporary Tablespace
Choice 4
Cached Table
Choice 5
Materialized View
Which one of the following statements do you execute in order to find the current default temporary tablespace?
Choice 1
SELECT property_name, property_value FROM v$database_properties
Choice 2
show parameter curr_default_temp_tablespace
Choice 3
SELECT property_name, property_value FROM all_database_properties
Choice 4
SELECT property_name, property_value FROM database_properties
Choice 5
SELECT property_name, property_value FROM dba_database_properties
In which one of the following situations do you use a bitmap index?
Choice 1
With column values that are guaranteed to be unique
Choice 2
With column values having a high cardinality
Choice 3
With column values having a consistently uniform distribution
Choice 4
With column values having a low cardinality
Choice 5
With column values having a non-uniform distribution
A table has more than two million rows and, if exported, will exceed 4 GB in size with data, indexes, and constraints. The UNIX you are using has a 2 GB limit on file sizes. This table needs to be backed up using Oracle EXPORT.
There are two ways this table can be exported and split into multiple files. One way is to use the UNIX pipe, split, and compress commands in conjunction with the Oracle EXPORT utility to generate multiple equally-sized files.
Referring to the scenario above, what is the other way that you can export and split into multiple files?
Choice 1
Export the data into one file and the index into another file.
Choice 2
Use a WHERE clause with the export to limit the number of rows returned.
Choice 3
Vertically partition the table into sizes of less than 2 GB and then export each partition as a separate file.
Choice 4
Specify the multiple files in the FILE parameter and specify the FILESIZE in the EXPORT parameter file.
Choice 5
Horizontally partition the table into sizes of less than 2 GB and then export each partition as a separate file.
Which one of the following statements describes the PASSWORD_GRACE_TIME profile setting?
Choice 1
It specifies the grace period, in days, for changing the password once expired.
Choice 2
It specifies the grace period, in days, for changing the password from the time it is initially set and the time the account is made active.
Choice 3
It specifies the grace period, in minutes, for changing the password once expired.
Choice 4
It specifies the grace period, in days, for changing the password after the first successful login after the password has expired.
Choice 5
It specifies the grace period, in hours, for changing the password once expired.
In OEM, what color and icon are associated with a warning?
Choice 1
Yellow hexagon
Choice 2
Yellow flag
Choice 3
Red flag
Choice 4
Gray flag
Choice 5
Red hexagon
What parameter in the SQLNET.ORA file specifies the order of the naming methods to be used?
Choice 1
NAMES.SEARCH_ORDER
Choice 2
NAMES.DOMAIN_HINTS
Choice 3
NAMES.DIRECTORY_PATH
Choice 4
NAMES.DOMAINS
Choice 5
NAMES.DIRECTORY
An Oracle 9i database instance has automatic undo management enabled. This allows you to use the Flashback Query feature of Oracle 9i.
Referring to the scenario above, what UNDO parameter needs to be set so that this feature allows consistent queries of data up to 90 days old?
Choice 1
UNDO_TABLESPACE
Choice 2
UNDO_TIMELIMIT
Choice 3
UNDO_MANAGEMENT
Choice 4
UNDO_FLASHBACKTO
Choice 5
UNDO_RETENTION
An Oracle 9i database instance has automatic undo management enabled. This allows you to use the Flashback Query feature of Oracle 9i.
Referring to the scenario above, what UNDO parameter needs to be set so that this feature allows consistent queries of data up to 90 days old?
Choice 1
UNDO_TABLESPACE
Choice 2
UNDO_TIMELIMIT
Choice 3
UNDO_MANAGEMENT
Choice 4
UNDO_FLASHBACKTO
Choice 5
UNDO_RETENTION
DB_BLOCK_SIZE=8192
DB_CACHE_SIZE=128M
DB_2K_CACHE_SIZE=64M
DB_4K_CACHE_SIZE=32M
DB_8K_CACHE_SIZE=16M
DB_16K_CACHE_SIZE=8M
Referring to the initialization parameter settings above, what is the size of the cache of standard block size buffers?
Choice 1
8 M
Choice 2
16 M
Choice 3
32 M
Choice 4
64 M
Choice 5
128 M
DB_CREATE_FILE_DEST='/u01/oradata/app01'
DB_CREATE_ONLINE_LOG_DEST_1='/u02/oradata/app01'
Referring to the sample code above, which one of the following statements is NOT correct?
Choice 1
Data files created with no location specified are created in the DB_CREATE_FILE_DEST directory.
Choice 2
Control files created with no location specified are created in the DB_CREATE_ONLINE_LOG_DEST_1 directory.
Choice 3
Redolog files created with no location specified are created in the DB_CREATE_ONLINE_LOG_DEST_1 directory.
Choice 4
Control files created with no location specified are created in the DB_CREATE_FILE_DEST directory.
Choice 5
Temp files created with no location specified are created in the DB_CREATE_FILE_DEST directory.
LogMiner GUI is a part of which one of the following?
Choice 1
Oracle Enterprise Manager
Choice 2
Oracle LogMiner Plug-In
Choice 3
Oracle Diagnostics Pack
Choice 4
Oracle Performance Tuning Pack
Choice 5
Oracle LogMiner StandAlone GUI
The schema in a database you are administering has a very complex and non-user friendly table and column naming system. You need a simplified schema interface to query and on which to report.
Which one of the following mechanisms do you use to meet the requirement stated in the above scenario?
Choice 1
View
Choice 2
Trigger
Choice 3
Stored procedure
Choice 4
Synonym
Choice 5
Labels
alter index gl.GL_JE_LINES_N1 rebuild
You determine that an index has too many extents and want to rebuild it to avoid fragmentation performance degradation.
When you issue the above scenario, where is the rebuilt index stored?
Choice 1
In the default tablespace for the login name you are using
Choice 2
You cannot rebuild an index. You must drop the existing index and re-create it using the create index statement.
Choice 3
In the system tablespace
Choice 4
In the same tablespace as it is currently stored
Choice 5
In the index tablespace respective to the data table on which the index is built
Which one of the following describes locally managed tablespaces?
Choice 1
Tablespaces within a Recovery Manager (RMAN) repository
Choice 2
External tablespaces that are managed locally within an administrative repository serving an Oracle distributed database or Oracle Parallel Server
Choice 3
Tablespaces that are located on the primary server in a distributed database
Choice 4
Tablespaces that use bitmaps within their datafiles, rather than data dictionaries, to manage their extents
Choice 5
Tablespaces that are managed via object tables stored in the system tablespace
Which method of database backup supports true incremental backups?
Choice 1
Export
Choice 2
Operating System backups
Choice 3
Oracle Enterprise Backup Utility
Choice 4
Incremental backups are not supported. You must use full or cumulative backups.
Choice 5
Recovery Manager
You are using Data Guard to ensure high availability. The directory structures on the primary and the standby hosts are different.
Referring to the scenario above, what initialization parameter do you set up during configuration of the standby database?
Choice 1
db_dir_name_convert
Choice 2
db_convert_dir_name
Choice 3
db_convert_file_name
Choice 4
db_directory_convert
Choice 5
db_file_name_convert
Tablespace APP_INDX is put in online backup mode when redo log 744 is current. When APP_INDX is taken out of online backup mode, redo log 757 is current.
Referring to the scenario above, if the backup is restored, what are the start and end redo logs used, in order, to perform a successful point-in-time recovery of APP_INDX?
Choice 1
Start Redo Log 744, End Redo Log 757
Choice 2
Start Redo Log 743, End Redo Log 756
Choice 3
Start Redo Log 745, End Redo Log 756
Choice 4
Start Redo Log 744, End Redo Log 756
Choice 5
Start Redo Log 743, End Redo Log 757
You want to make new data entered or changed in a table adhere to a given integrity constraint, but data exist in the table that violates the constraint.
Referring to the scenario above, what do you do?
Choice 1
Use an enabled novalidate constraint.
Choice 2
Use an enabled validate constraint.
Choice 3
Use a deferred constraint.
Choice 4
Use a disabled constraint.
Choice 5
You cannot enforce this type of constraint
In Oracle 9i, the connect internal command has been discontinued.
Referring to the text above, how do you achieve a privileged connection in Oracle 9i?
Choice 1
CONNECT <username> AS SYSOPER where username has DBA privileges.
Choice 2
CONNECT <username> as SYSDBA.
Choice 3
Connect using Enterprise Manager.
Choice 4
CONNECT sys.
Choice 5
Use CONNECT <username> as normal but include the user in the external password file.
How many partitions can a table have?
Choice 1
64
Choice 2
255
Choice 3
1,024
Choice 4
65,535
Choice 5
Unlimited
In Cache Fusion, when does a request by one process for a resource owned by another process fail?
Choice 1
When a null mode resource request is made for a resource already owned in exclusive mode by another process
Choice 2
When a shared mode resource request is made for a resource already owned in shared mode by another process
Choice 3
When a shared mode resource request is made for a resource already owned in null mode by another process
Choice 4
When an exclusive mode resource request is made for a resource already owned in null mode by another process
Choice 5
When an exclusive mode resource request is made for a resource already owned in shared mode by another process
The Oracle Internet Directory debug log needs to be changed to show the following events information.
Given the Debug Event Types and their numeric values:
Starting and stopping of different threads. Process related. - 4
Detail level. Shows the spawned commands and the command-line arguments passed - 32
Operations being performed by configuration reader thread. Configuration refresh events. - 64
Actual configuration reading operations - 128
Operations being performed by scheduler thread in response to configuration refresh events, and so on - 256
What statement turns debug on for all of the above event types?
Choice 1
oidctl server=odisrv flags="debug=4 debug=32 debug=64 debug=128 debug=256" start
Choice 2
oidctl server=odisrv debug="4,32,64,128,256" start
Choice 3
oidctl server=odisrv flags="debug=4,32,64,128,256" start
Choice 4
oidctl server=odisrv flags="debug=484" start
Choice 5
oidctl server=odisrv debug=4 debug=32 debug=64 debug=128 debug=256 start
A new OFA-compliant database is being installed using the Oracle installer. The mount point being used is /u02.
Referring to the scenario above, what is the default value for ORACLE_BASE?
Choice 1
/usr/app/oracle
Choice 2
/u02/oracle
Choice 3
/u02/app/oracle
Choice 4
/u01/app/oracle
Choice 5
/u02/oracle_base
You need to start the Connection Manager Gateway and the Connections Admin processes.
Referring to the scenario above, what command do you execute?
Choice 1
CMCTL START CM
Choice 2
CMCTL START CMADMIN
Choice 3
CMCTL START CMAN
Choice 4
CMCTL START CMGW
Choice 5
CMCTL START CMGW CMADM
When performing full table scans, what happens to the blocks that are read into buffers?
Choice 1
They are read into the first free entry in the buffer list.
Choice 2
They are put on the MRU end of the buffer list if the NOCACHE clause was used while altering or creating the table.
Choice 3
They are put on the LRU end of the buffer list if the CACHE clause was used while altering or creating the table.
Choice 4
They are put on the LRU end of the buffer list by default.
Choice 5
They are put on the MRU end of the buffer list by default.
You wish to take advantage of the Oracle datatypes, but you need to convert your existing LONG or LONG RAW columns to Character Large Object (CLOB) and Binary Large Object (BLOB) datatypes.
Referring to the scenario above, what is the quickest method to use to perform this conversion?
Choice 1
Use the to_lob function when selecting data from the existing table into a new table.
Choice 2
Use the ALTER TABLE statement and MODIFY the column to the new LOB datatype.
Choice 3
You must export the existing data to external files and then re-import them as BFILE external LOBS.
Choice 4
Create a new table with the same columns but with the LONG or LONG RAW column changed to a CLOB or BLOB type. The next step is to INSERT INTO newtable select * from oldtable.
Choice 5
LONG and LONG RAW datatypes are not compatible with LOBS and cannot be converted within the Oracle database.
You need to redefine the JOURNAL table in the stress test environment. You want to check first to see if it is possible to redefine this table online.
Referring to the scenario above, what statement do you execute that checks whether or not the JOURNAL table can be redefined online if you are connected as the table owner?
Choice 1
Execute DBMS_REDEFINITION.CHECK_TABLE_REDEF(USER,'JOURNAL');
Choice 2
Execute DBMS_REDEFINITION.VERIFY_REDEF_TABLE(USER,'JOURNAL');
Choice 3
Execute DBMS_REDEFINITION.CAN_REDEF_TABLE(USER,'JOURNAL');
Choice 4
Execute DBMS_REDEFINITION.START_REDEF_TABLE(USER,'JOURNAL');
Choice 5
Execute DBMS_REDEFINITION.SYNC_INTERIM_TABLE(USER,'JOURNAL');
An Oracle 9i database instance has automatic undo management enabled. This allows you to use the Flashback Query feature of Oracle 9i.
Referring to the scenario above, what UNDO parameter needs to be set so that this feature allows consistent queries of data up to 90 days old?
Choice 1
UNDO_TIMELIMIT
Choice 2
UNDO_MANAGEMENT
Choice 3
UNDO_RETENTION
Choice 4
UNDO_TABLESPACE
Choice 5
UNDO_FLASHBACKTO
Which one of the following procedures is used for the extraction of the LogMiner dictionary?
Choice 1
DBMS_LOGMNR_D.EXTRACT
Choice 2
DBMS_LOGMNR.BUILD
Choice 3
DBMS_LOGMINER_D.BUILD
Choice 4
DBMS_LOGMNR_D.BUILD_DICT
Choice 5
DBMS_LOGMNR_D.BUILD
set pause on;
column sql_text format a35;
select sid, osuser, username, sql_text
from v$session a, v$sqlarea b
where a.sql_address=b.address
and a.sql_hash_value=b.hash_value
Why is the SQL*Plus sample code segment above used?
Choice 1
To view full text search queries by issuing user
Choice 2
To list all operating system users connected to the database
Choice 3
To view SQL statements issued by connected users
Choice 4
To detect deadlocks
Choice 5
To view paused database sessions
When dealing with very large tables in which the size greatly exceeds the size of the System Global Area (SGA) data block buffer cache, which one of the following operations must be avoided?
Choice 1
Group operations
Choice 2
Aggregates
Choice 3
Index range scans
Choice 4
Multi-table joins
Choice 5
Full table scans
You are reading the explain plan of a problem query and notice that full table scans are used with a HASH join.
Referring to the scenario above, in what instance is a HASH join beneficial?
Choice 1
Only when using the rule-based optimizer
Choice 2
When joining two small tables--neither having any primary keys or unique indexes
Choice 3
When no indexes are present
Choice 4
When joining two tables where one table may be significantly larger than the other
Choice 5
When using the parallel query option
Performance is poor during peak transaction periods on a database you administer. You would like to view some statistics on areas such as LGWR (log writer) waits.
Referring to the scenario above, what performance view do you query to access these statistics?
Choice 1
V$SQLAREA
Choice 2
V$SYSSTAT
Choice 3
V$SESS_IO
Choice 4
V$PQ_SYSSTAT
Choice 5
DBA_CATALOG
What security feature allows the database administrator to monitor successful and unsuccessful attempts to access data?
Choice 1
Autotrace
Choice 2
Fine-Grained Auditing
Choice 3
Password auditing
Choice 4
sql_trace
Choice 5
tkprof
You need to configure a default domain that is automatically appended to any unqualified net service name.
What Oracle-provided network configuration tool do you use to accomplish the above task?
Choice 1
Oracle Names Control Utility
Choice 2
Configuration File Utility
Choice 3
Oracle Network Configuration Assistant
Choice 4
Listener Control Utility
Choice 5
Oracle Net Manager
You are experiencing performance problems due to network traffic. One way to tune this is by setting the SDU size.
Referring to the scenario above, why do you change the SDU size?
Choice 1
The requests to the database return small amounts of data as in an OLTP system.
Choice 2
The application can be tuned to account for the delays.
Choice 3
The data coming back from the server are fragmented into several packets.
Choice 4
A large number of users are logged on concurrently to the system.
Choice 5
A high-speed network is available where the data transmission effect is negligible.
You have partitioned the table ORDER on the ORDERID column using range partitioning. You want to create a locally partitioned index on this table. You also want this index to be unique.
Referring to the scenario above, what is required for the creation of this unique locally partitioned index?
Choice 1
A unique partitioned index on a table cannot be local.
Choice 2
There can be only one unique locally partitioned index on the table.
Choice 3
The index has to be equipartitioned.
Choice 4
The table's primary key columns should be included in the index key.
Choice 5
The ORDERID column has to be part of the index's key.
You have a large On-Line Transaction Processing (OLTP) database running in archive log mode with two redo log groups that have two members each.
Referring to the above scenario, to avoid stalling during peak activity periods, which one of the following actions do you take?
Choice 1
Turn off redo log multiplexing.
Choice 2
Increase your LOG_CHECKPOINT_INTERVAL setting.
Choice 3
Add a third member to each of the groups.
Choice 4
Add a third redo log group.
Choice 5 Turn off archive logging
When transporting a tablespace, the tablespace needs to be self-contained.
Referring to the scenario above, in which one of the following is the tablespace self-contained?
Choice 1 A referential integrity constraint points to a table across a set boundary.
Choice 2 A partitioned table is partially contained in the tablespace.
Choice 3 An index inside the tablespace is for a table outside of the tablespace.
Choice 4 A corresponding index for a table is outside of the tablespace.
Choice 5 A table inside the tablespace contains a LOB column that points to LOBs outside the tablespace.
You have experienced a database failure requiring a full database restore. Downtime is extremely costly, as is any form of data loss. You run the database in archive log mode and have a full database backup from three days ago. You have a database export from last night. You are not running Oracle Parallel Server (OPS).
Referring to the above scenario, how do you minimize downtime and data loss?
Choice 1 Import the data from the export using direct-path loading.
Choice 2 Create a standby database and activate it.
Choice 3 Perform a restore of necessary files and use parallel recovery operations to speed the application of redo entries.
Choice 4 Conduct a full database restore and bring the database back online immediately. Apply redo logs during a future maintenance window.
Choice 5 Perform a restore and issue a recover database command
You have two large tables with thousands of rows. To select rows from the table_1, which are not referenced by an indexed common column (e.g. col_1) in table_2, you issue the following statement:
select * from table_1
where col_1 NOT in (select col_1 from table_2);
This statement is taking a very long time to return its result set.
Referring to the scenario above, which equivalent statement returns much faster?
Choice 1 select * from table_1
where col_1 in (select col_1 from table_2 where col_1 = table_1.col_1)
Choice 2 select * from table_2
where col_1 not in (select col_1 from table_1)
Choice 3 select * from table_1
where not exists (select 'x' from table_2 where col_1 = table_1.col_1)
Choice 4 select table_1.* from table_1, table_2
where table_1.col_1 = table_2.col_1 (+)
Choice 5 select * from table_1
Which one of the following initialization parameters is obsolete in Oracle 9i?
Choice 1 LOG_ARCHIVE_DEST
Choice 2 GC_FILES_TO_LOCKS
Choice 3 FAST_START_MTTR_TARGET
Choice 4 DB_BLOCK_BUFFERS
Choice 5 DB_BLOCK_LRU_LATCHES
You find that one of your tablespaces is running out of disk space.
Referring to the scenario above, which one of the following is NOT a valid option to increase the space available to the tablespace?
Choice 1 Move some segments to other tablespaces.
Choice 2 Resize an existing datafile in the tablespace.
Choice 3 Add another datafile to the tablespace.
Choice 4 Increase the MAX_EXTENTS for the tablespace.
Choice 5 Turn AUTOEXTEND on for one or more datafiles in the tablespace.
What tools or utilities do you use to transfer the data dictionary's structural information of transportable tablespaces?
Choice 1 DBMS_TTS
Choice 2 SQL*Loader
Choice 3 Operating System copy commands
Choice 4 DBMS_STATS
Choice 5 EXP and IMP
Which one of the following, if backed up, is potentially problematic to a complete recovery?
Choice 1
Control file
Choice 2
System Tablespace
Choice 3
Data tablespaces
Choice 4
Online Redo logs
Choice 5
All archived redologs after the last backup
Your database warehouse performs frequent full table scans. Your DB_BLOCK_SIZE is 16,384.
Referring to the scenario above, what parameter do you use to reduce disk I/O?
Choice 1 LOG_CHECKPOINT_TIMEOUT
Choice 2 DBWR_IO_SLAVES
Choice 3 DB_FILE_MULTIBLOCK_READ_COUNT
Choice 4 DB_WRITER_PROCESSES
Choice 5 DB_BLOCK_BUFFERS
Which one of the following describes the "Reset database to incarnation" command used by Recovery Manager?
Choice 1 It performs a resynchronization of online redo logs to a given archive log system change number (SCN).
Choice 2 It performs point-in-time recovery when using Recovery Manager.
Choice 3 It restores the database to the initial state in which it was found when first backing it up via Recovery Manager.
Choice 4 It restores the database to a save point as defined by the version control number or incarnation number of the database.
Choice 5 It is used to undo the effect of a resetlogs operation by restoring backups of a prior incarnation of the database.
You are using the CREATE TABLE statement to populate the data dictionary with metadata to allow access to external data, where /data is a UNIX writable directory and filename.dbf is an arbitrary name.
Referring to the scenario above, which clause must you add to your CREATE TABLE statement?
Choice 1
organization external
Choice 2 external file /data/filename.dbf
Choice 3 ON /data/filename.dbf
Choice 4 organization file
Choice 5 file /data/filename.dbf
Your business user has expressed a need to be able to revert back to data that are at most eight hours old. You decide to use Oracle 9i's FlashBack feature for this purpose.
Referring to the scenario above, what is the value of UNDO_RETENTION that supports this requirement?
Choice 1 480
Choice 2 8192
Choice 3 28800
Choice 4 43200
Choice 5 28800000
Materialized Views constitute which data warehousing feature offered by Oracle?
Choice 1 FlashBack Query
Choice 2 Summary Management
Choice 3 Dimension tables
Choice 4 ETL Enhancements
Choice 5 Updateable Multi-table Views
DB_BLOCK_SIZE=8192
DB_CACHE_SIZE=128M
DB_2K_CACHE_SIZE=64M
DB_4K_CACHE_SIZE=32M
DB_8K_CACHE_SIZE=16M
DB_16K_CACHE_SIZE=8M
Referring to the initialization parameter settings above, what is the size of the cache of standard block size buffers?
Choice 1 8 M
Choice 2 16 M
Choice 3 32 M
Choice 4 64 M
Choice 5 128 M
You need to send listener log information to the Oracle Support Services. The listener name is LSNRORA1.
Referring to the scenario above, which one of the following statements do you use in the listener.ora file to generate this log information?
Choice 1 TRACE_LEVEL_LSNRORA1=debug
Choice 2 TRACE_LEVEL_LSNRORA1=admin
Choice 3 TRACE_LEVEL_LSNRORA1=5
Choice 4 TRACE_LEVEL_LSNRORA1=support
Choice 5 TRACE_LEVEL_LSNRORA1=on
Which one of the following statements causes you to choose the NOARCHIVELOG mode for an Oracle database?
Choice 1
The database does not need to be available at all times.
Choice 2
The database is used for a DSS application, and updates are applied to it once in 48 hours.
Choice 3
The database needs to be available at all times.
Choice 4
It is unacceptable to lose any data if a disk failure damages some of the files that constitute the database.
Choice 5
There will be times when you will need to recover to a point-in-time that is not current.
You are experiencing performance problems due to network traffic. One way to tune this is by setting the SDU size.
Referring to the scenario above, why do you change the SDU size?
Choice 1 A large number of users are logged on concurrently to the system.
Choice 2 A high-speed network is available where the data transmission effect is negligible.
Choice 3 The data coming back from the server are fragmented into several packets.
Choice 4 The application can be tuned to account for the delays.
Choice 5 The requests to the database return small amounts of data as in an OLTP system.

Post a few if you need answers to a few.
Anyway, my best shot:-
Q. Directories are different
A. Use db_file_name_convert why? read about it.
Q What facility does Oracle provide to detect chained and migrated rows after the proper tables have been created?
A.The ANALYZE command with the LIST CHAINED ROWS option
Q While doing an export, the following is encountered:
my best guess
Use the RESUMABLE=Y option for the export.
Q. The DBCA (Database Configuration Assistant) prompts the installer to enter the password for which default users?
A. SYS and SYSTEM
Q You are designing the physical database for an application that stores dates and times. This will be accessed by users from all over the world in different time zones. Each user needs to see the time in his or her time zone.
A. TIMESTAMP WITH LOCAL TIME ZONE
Q What command do you use to drop a temporary tablespace and the associated OS files?
A. ALTER DATABASE TEMPFILE '/data/oracle/temp01.dbf' DROP INCLUDING DATAFILES;
Q You wish to use a graphical interface to manage database locks and to identify blocking locks.
A. Lock Manager, a tool in the base Oracle Enterprise Manager (OEM) product, as well as the console
Q CREATE DATABASE abc
A. They cannot be changed unless you re-create your control file
Q You need to change the archivelog mode of an Oracle database.
A. Execute the archive log list command
Q When interpreting statistics from the v$sysstat, what factor do you need to keep in mind that can skew your statistics?
A.
Choice 3 The statistics gathered by v$sysstat include database startup activities and database activity that initially populates the database buffer cache and shared pool.
Q You want to shut down the database, but you do not want client connections to lose any non-committed work. You also do not want to wait for every open session to disconnect.
Choice 3 Shutdown transactional
Q What step or steps do you take to enable Automatic Undo Management (AUM)?
A.Choice 5 Add UNDO_MANAGEMENT=AUTO parameter to init.ora, create the UNDO tablespace, stop/start the database
Q What Oracle 9i feature allows the database administrator to create tablespaces, datafiles, and log groups WITHOUT specifying physical filenames?
A. Choice 4 Oracle Managed Files

Questions on using templates [CS3]

Greetings,
I'm trying to figure out the best way to approach an InDesign task, and my rank-novice-level experience isn't cutting it. Normally I'd read through a gazillion help pages and do a bunch of tutorials to try and teach myself enough to answer the questions on my own - but I'm a new parent (~2 months), so don't really have the time to take my usual approach; indeed, it took me several days just to write up this question and post it. So any help is *much* appreciated!
What I'm trying to do: create ~80 cards for a board game. Each will have similar layout, so creating a template file seems like the way to go. I've never worked with templates before, but doing so seems straightforward enough for things like text, or for an illustration which would be different on every card. However:
Difficulty #1: Some cards are of one type - call it type A - while others are of type B. Several graphical elements are always the same for a given type, but are different for A vs. B. I'm sure there must be a simple way to say "this file uses all items for type A, and not B", but I'm not sure if this would be best done using different templates, different master pages, setting which layers are visible on an imported photoshop file, or some other technique. (Did I mention I'm a total novice with InDesign?)
Difficulty #2: There are half a dozen graphical elements (icons), each of which may or may not appear on a given card. Using templates or master pages for all permutations of their visibility seems like a bad idea. But if I simply delete the not-shown objects from each file (assuming one can do such a thing when using templates), that makes later changes (which might involve re-adding them) difficult. In Photoshop or Illustrator - both of which I'm more familiar with than InDesign - I'd simply make the layer/object non-visible; is there an equivalently simple way to "get rid of this object, but let it be easy to bring back" in InDesign? (I've found the "nonprinting" attribute, but that doesn't seem to hide it from view while editing, which makes verifying the layout as correct rather onerous.)
Trying to look ahead #1: Eventually, I'd like to create an InDesign document which imports all of the single card files into an easily printable layout (9 cards to a page); I'm told this is possible. Is there anything I should know to avoid shooting myself in the foot / making this task unreasonably difficult? (eg: if InDesign throws tantrums when you try to import multiple documents based off the same template, I'd sure like to know that before making 80 cards based off the same template.)
Many thanks to anyone who can help!
--Eric

I'd make the card file at the trim size, and add a bleed allowance if you need one. Export this to PDF withthe bleed, but NO MARKS.
Ah, here's where I display my novice status:
1. So you'd suggest just one card file, rather than one file per card all using the same template?
(If relevant: it would also be useful to be able to distribute 9-up PDFs of, eg, the only the 16 cards which changed in a particular revision.)
2. I'm familiar with bleed allowance, but am guessing at what you mean by "trim size", and don't know at all what you're referring to by Marks? My experience with actual pre-press production is pretty much nil.
I should probably mention, since I didn't earlier, that there is a downside to overriding master objects. If you apply a new master, or reapply the old one for some reason, the overridden objects remain and new master objects will be replaced where missing. Also, if you make any chages to an overridden object, that attribute, such as size or position, for example, loses it's link to the master and will no longer update if the master object is edited.
Mm, that is a difficulty; if I'm understanding this correctly, if I (eg) replaced or moved one of the icons on the master page, it would change on every card for which it was visible (printable), but not on those cards where it had been overridden to be non-printing - only a problem if I have to change which icons show on which cards, but that will certainly happen from time to time.
Is there a way to tell an object "stop overriding and re-load all your information from the appropriate master object"?

How do I export a PDF without the print bleed extra "stuff" around the edges?

I know my question wording sucks, but I didn't know how else to put it.
I created a document in ID for print with a bleed. When I export to PDF, the image is not cropped to the finished size of the page, but includes the excess background images that I extended beyond the page bounds for a bleed. I am now trying to export a PDF that can be sent in email and will not be printed, and so I would like to export a PDF file that does not have any of that extra stuff (I have turned off the printer's marks) around the edges. But my PDF has the excess stuff and a red outline around the actual page dimensions. How do I export a PDF that is cropped to the correct page size (8.5" x 11")?
I have attached the PDF I have created with the excess stuff and the red outline around the page size so you can see what I mean.
Thanks!
Bryan

Hello,
i have a problem exporting as a PDF also, i have done this before successfully and i have unchecked all the boxes to turn off bleeds etc, etc... however the bleed area is still coming through. I have tried saving the file under another name, closing down and reopening - nothing seems to work. I'd be very grateful if someone could offer some advice on this.
Thanks!
John

Bleed boundary question

Similar Messages

Maybe you are looking for