"Bleeping out" profanity in Soundtrack Pro

When you insert a sine waveform in Soundtrack Pro, it seems to insert it before the selected area...
How can you cover the area up? I've tried copying the area and then pasting it, but it seems to screw up the video synching.
Any thoughts? I know in Sound Studio it replaces the selected area with the waveform. Why not Soundtrack?

hey there mricect,
this isn't the Soundtrack Pro discussion. you should post your question there.
good luck.

Similar Messages

  • How do i block or bleep out profanity on an online video?

    Is there a plugin or script where while watching, say, a training video where the instructor for some reason has poor grammer, and cusses all the time, you can bleep it out, but still view the training?

    I use [https://addons.mozilla.org/en-US/firefox/addon/1865/ Adblock Plus] and do not see any adsense type ads. When you install Adblock Plus it will ask you to add a filter subscription, I use EasyList.

  • Move Soundtrack Pro Playhead with Applescript?

    I've opened an audio file in Soundtrack Pro with Applescript and would like to move the playhead to the end of the file to insert silence. Seems simple but I've struggled a lot. How might I do this?
    Unlike Microsoft Word, Excel etc. there is relatively little discussion out there on Soundtrack Pro with Applescript. I'd love to just utilize terms from the Soundtrack Pro Applescript dictionary, but the truth is that I'm incapable of using the dictionary effectively. Just like the English language, if you don't know how to put the words together, the dictionary doesn't help you make a sentence; any advice on where/how to learn to put Applescript dictionary terms to use?
    I read an entire beginner's book ("A Beginner's Guide: Applescript") but it didn't discuss dictionaries : (.
    Thank you so much for your help!

    I've opened an audio file in Soundtrack Pro with Applescript and would like to move the playhead to the end of the file to insert silence. Seems simple but I've struggled a lot. How might I do this?
    Unlike Microsoft Word, Excel etc. there is relatively little discussion out there on Soundtrack Pro with Applescript. I'd love to just utilize terms from the Soundtrack Pro Applescript dictionary, but the truth is that I'm incapable of using the dictionary effectively. Just like the English language, if you don't know how to put the words together, the dictionary doesn't help you make a sentence; any advice on where/how to learn to put Applescript dictionary terms to use?
    I read an entire beginner's book ("A Beginner's Guide: Applescript") but it didn't discuss dictionaries : (.
    Thank you so much for your help!

  • Have Added Soundtrack Pro Loops. Now Need To Delete Greyed Out Duplicates?

    As you know, only half the loops come on the DVD and the rest have to be downloaded.
    The downloadable loops appear greyed out in the Loops Browser until you download them.
    I have added my Soundtrack Pro loops to the Loops Browser so now every downloadable loop is duplicated.
    One is playable (the STP one) whilst the other is greyed out.
    Is there any way of deleting the greyed out names?

    Ian R. Brown wrote:
    Is there any way of deleting the greyed out names?
    re-index them:
    http://www.bulletsandbones.com/GB/GBFAQ.html#reindex
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Installing logic studio 9, soundtrack pro and loops utility greyed out

    Hi,
    I'm trying to reinstal logic studio 9 and on the screen where you select and deselect the instal options soundtrack pro (and therefore compressor) are labelled as skip and greyed out not allowing select. The same is true for the apple loops utility. I'm pretty sure i removed all the files of previous instal. Anyone help?

    nevermind i found this thread https://discussions.apple.com/message/10690183#10690183

  • Is there somebody out there to shed some light on this? Change keys, tempo in Soundtrack Pro greyed out?

    From the amount of posted unanswered questions like mine one should be able to see that there are more than a few people confused about the greyed out "Change keys, tempo in Soundtrack Pro" (and for that matter in Apple Loops Utility, Logic, GarageBand)! What does it take to help out the less adept budding beginners? Please don't post read the manual or search for... we all know you can spend days with no results. There is nothing better than a friendly person (wizard) who knows and has done it all, giving clear step by step instructions. Please lay it out for us lesser brains. Thank you so much for your time and patience.

    rs = stmt.executeQuery("SELECT gender FROM gymuser WHERE Username= 'userName' ");
    in this line i think there is some error put it like this
    rs = stmt.executeQuery("SELECT gender FROM gymuser WHERE Username= '"+userName+"' ");
    Try to put some SOPs in between, so that u can check in logs(if using tomcat)where u r making mistake.

  • Soundtrack Pro and Compressor greyed out on installation

    For some reason the option to install Soundtrack Pro and Compressor are greyed out when performing installation of Logic Stdio.
    I had installed Logic Studio previously but ran out of disk space and so uninstalled the program, upgraded my hard drive and I'm now at the point of reinstallation - but can't install those two programs.
    Here's a screen shot of what I get AFTER installing what I can:
    http://www.btinternet.com/~wack/screen.jpg
    Also, why do some of the programs have 'upgrade' under Action?
    Thanks.

    I tried Final Cut Remover, and still had the same problem. I am in the midst of using Pacifist and it seems to be working. Apparently Pacifist copies the compressed files to to your hard drive then extracts and installs the programs. It appears to be working, but I will let you know whenever it finishes if indeed it does the job...
    It is free to try and $20 for a donation. It might be a bargain considering the time it will save me...

  • From FCP timeline...send to soundtrack pro audio file project is greyed out

    The send to multi track is not greyed out but that's not what I need.
    The stereo audio file is 48KHz and I have 7 tracks of audio in the sequence all of which are stereo except the VO track.
    If I use "open in editor" to open a stereo file from the timeline soundtrack only imports one channel.
    I'm trying to run these stero audio clips through STP using the waveform editor to quickly analyze and fix the "clicks and pops" also adding a low cut off filter to some of the clips to help eliminate some wind noise.
    Seems the only way I can get it to work is to export each clip as an aiff file and then import it to STP, edit non destructively, save as a .stap file and then reimport that .stap file back into FCP........
    Any ideas why the "send to STP audio file project" is greyed out? perhaps I have forgotten a preference setting somewhere?
    All help appreciated.
    Thanks,
    Dave
    G5 dual 2.0, 3.0 GB ram, 2x250 internal   Mac OS X (10.3.9)   FCP 5.0.4 DVDSP 4.0.3 Motion 2.0.1 Soundtrack pro 1.0.3 QT 7.0.4

    Hey, Dave. That can happen if you captured your files with two audio tracks instead of a single stereo track. The two channels will show up on two tracks, but they're not actually stereo in the quicktime file.
    When you captured, did you click the "OO" button next to the audio channels to link them to stereo? You can look at the contents of the quicktime file with Quicktime Player and see if you've got one audio track with two channels assigned to "left" and "right". If you have some other configuration in the file, check out these old threads for workarounds, or recapture if that's an option.
    http://discussions.apple.com/message.jspa?messageID=1456638
    http://discussions.apple.com/thread.jspa?threadID=259929

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • Soundtrack Pro pops out of record mode after 1 second  -  Help!

    I have an ADR session tomorrow, so this one is pretty urgent. I have Soundtrack Pro 2.02 on my PPC G5 and I've used it to record vocal tracks for a long time, but I haven't used it a couple months. I started it tonight to do a couple test takes and hit the record button and it records for about 1 second then pops out of record mode. The playhead, however, continues to run. So it's not that it stops altogether, it just quits recording.
    Nothing new in terms of hardware, same preamps, same mic. No new software that I can think of, just the standard updates. Searched the and found the same question asked a earlier this year but was never answered ( http://discussions.apple.com/thread.jspa?threadID=1382762&tstart=6 ). I hope someone knows what's going on. Thanks much.

    UPDATE:
    I did a complete re-install of FCS and it's working now.

  • In Soundtrack Pro I want to change the key of the audio but the feature is greyed out

    Hi.
    When I work with an audio file in Soundtrack Pro and want to raise or lower the key of the audio
    the choice is greyed out and so is change tempo. I am selecting the region and the track but
    those 2 features are grey and can't be used. Is there anybody who knows why and how to get
    them. Thank you for your time and patience.
                                                                       Walter   

    I have no idea if it's legal or not, but you could use a proxy software to "spoof" your location.

  • Something has gone wrong inside my Soundtrack Pro and I cannot figure it out.

    So I can record with any other program on my Mac Pro, including the voiceover inside FCP, but cannot get a clean recording from Soundtrack Pro.
    Everything sounds like this - https://rapidshare.com/files/4143174674/Track%201%20Recording%20232.aif
    I thought it might have something to do with sample rates, but didn't notice anyhting.
    I was using a Shure SM89 shotgun mic recording some family members commentating on old family film. I was going into a Behringer 1202 mixer, and then out into my Mac Pro from the line-in. I assume I cannot fix these recording, and it was my fualt as I had my headphones pluged into my mixer and not into the computer.
    Now anything I record in Soundtrack Pro sounds like this, although it records fine in other programs.
    Any suggestions?

    It is an analog mixer, and I have the main outs going to RCAs and then those paired down into a stereo mini jack going into my Mac Pro.
    I actually have not messed with any setting in the program in a year or so, and it was working fine for that time. I recently updated to OSX 10.6 from 10.5, and I am wondering if that may have something to do with it?
    Like I said this was working fine for the past year or so, and after that update I can no longer record anything usable in Soundtrack pro, all the audio sounds like the sample I provided.
    That being said, I can open FCP7 and use the voiceover tool to record audio with the exact same set-up and it works perfectly fine, so for the meantime that is what I have been doing, and worst case scenario my MacBook Pro also and The FCP Studio installed on it, and I could always record to Soundtrack Pro through that.

  • Soundtrack Pro: Gain Greyed out

    I am probably being thick...but when I try and record audio into soundtrack pro (v.1.0) via the line-in on my 17" Powerbook, the gain control remians greyed out. This of course results in a very low-level recording.
    Why is the gain greyed-out?
    Powerbook G4 17"   Mac OS X (10.4.1)   Soundtrack Pro v.1.0

    OK, we've got a bit more information to share:
    On the iMacs, the audio chipset in ASP is "Burr Brown PCM3052"
    On our Mac Minis, it's "Intel high-definition audio."
    On the Mac Minis, the gain slider DOES work. Furthermore, we've found that Garage Band DOES give an adjustable gain slider for the input on the iMacs. IOTW we can set analog record levels in Garage Band on the great majority of our machines, but not in Soundtrack Pro.
    Any response from Apple employees on this issue would be very much appreciated.
    iMac G5 2GHz   Mac OS X (10.4.7)  

  • Soundtrack Pro and Final Cut Server....can you check-in/check-out?

    Hello!
    Just curious how the workflow is with Soundtrack Pro and Final Cut Server. We haven't used Soundtrack Pro, but have been thinking about it for Surround Sound projects.

    You can check in anything into FCSvr, any type of project file or media file. Unlike checking in/out a Final Cut Pro project, with any other application, you'll need to check out the project file for that app, and manually check out all the media associated with it. Many folks will simply set up the STP, or Motion, or InDesign, or Illustrator project and it's associated media all into the same folder on their workstation. Then check in/out that folder as a "bundled asset". This makes a zip file in FCSvr that holds all of those needed files together. When you check it out, it's unzipped and places on your local workstation. When you check back in, FCSvr re-zips it and replaces the original on it's RAID storage drive.

  • Alert! soundtrack pro is running out of resources

    hello friends,
    I keep getting this message after doing a few edits in STP:
    Alert! Soundtrack Pro is running out of resources. it is recommended that you save your work and relaunch the application.
    I thought this may be due to too many programs running at once, so I shut everything down, did a restart and still get this message. I did just run system updates and there were a few program updates -- Safari and a couple others, I think.
    Here are my system specs:
    Processor  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory  32 GB 800 MHz DDR2 FB-DIMM
    Graphics  NVIDIA GeForce 8800 GT 512 MB
    Software  Mac OS X Lion 10.7.4 (11E53)
    thanks for an help you can offer.

    Moving iPhoto Library - http://support.apple.com/kb/HT1229. and http://support.apple.com/kb/PH2506.
    Moving iMovie Events to an external drive to save space see the following 2 articles:
    PH2302 - How to move "Events Only" to an external hard drive - http://support.apple.com/kb/PH2302?viewlocale=en_US.
    PH2289 - How to move "Projects" (and their associated events) to an external drive - http://support.apple.com/kb/PH2289?viewlocale=en_US&locale=en_US. 
    Also note, you can save space on your hard drive by deleting "Excess" unused video in your event folder - see the iMovie 11 help menu, and select the "browse help" tab.  Under Manage Events, select "Delete all excess video from an event"
    NOTE - ensure you are "Moving" the data, and not just "Copying" the data as per - http://support.apple.com/kb/PH2302?viewlocale=en_US.  (hold down COMMAND while dragging to the external drive) for the best results and less chance of loosing data connection with the project

Maybe you are looking for