Blend and a Z30- works on tablet, not on Mac
Hello,
I used to have a Z10 and Blend installed on my MacBook Air and it worked great. Since then I got rid of the Z10 and acquired a Z30. I also had uninstlled blend in the meantime. When I reinstalled and got set up with connecting the Z30, it still lists my Z10 I believe, not my current phone at all and states it "Currently Unavailable." I installed BlackBerry Link too on the Mac and had no trouble there. How can I "unlink" the old device or make blend recognize the Z30? I installed Blend on my Windows 8.1 tablet without issue. Any ideas?
Thanks.
Solved!
Go to Solution.
First of all, make sure you have Blend activated on your phone (you can see it in quick settings, or in Settings > Device connections > Enable connections).
Then you have to either connect to the Mac with an USB cable, or to be on a WiFi network, which the Mac shares (to be on the same subnet to be precise). This is needed only for the initial setup - you can use mobile network later.
After that it would be best to try to sign out from the Blend on your Mac, and sign back in (of course you have to be signed in with the same BBID on your phone). If it still won't find your phone, try to reinstall Blend on your Mac. It's still a relatively new piece of software and this may help to get things going. This has helped me with another issue in the past.
Similar Messages
-
My i phone 4 is water damaged and it is working but network not shown so please help me
my i phone 4 is water damaged and it is working but network not shown so please help me
A replacement iPhone is usually a refurbished iPhone that has received new battery and case and repair of anything that may have been faulty. The refurbished iPhone is indistinguishable from a new iPhone. A number of the regulars on here prefer the refurbished Aplle products because they have been so thoroughly tested.
A replacement iPhone is identical to the original, same color, capacity, and so on. -
How to verify that standby and primary are working correctly or not
Hi,
Oracle Version : 10.2.0.1.0
OperatingSystem : WindowsXp
I have configured a stand by database on my local database.Here i would like to know weather by stand by is configured correctly and working fine are not.
Please help me.
Thank & Regards
Poorna Prasad.Hi,
When i issue these statements in my primary database the output is like this
SQL> SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
SEQUENCE# FIRST_TIM NEXT_TIME
169 19-AUG-09 20-AUG-09
170 20-AUG-09 20-AUG-09
171 20-AUG-09 20-AUG-09
172 20-AUG-09 20-AUG-09
173 20-AUG-09 20-AUG-09
174 20-AUG-09 21-AUG-09
175 21-AUG-09 21-AUG-09
176 21-AUG-09 22-AUG-09
177 22-AUG-09 22-AUG-09
178 22-AUG-09 23-AUG-09
179 23-AUG-09 23-AUG-09
SEQUENCE# FIRST_TIM NEXT_TIME
180 23-AUG-09 24-AUG-09
180 23-AUG-09 24-AUG-09
181 24-AUG-09 24-AUG-09
181 24-AUG-09 24-AUG-09
182 24-AUG-09 24-AUG-09
182 24-AUG-09 24-AUG-09
183 24-AUG-09 24-AUG-09
183 24-AUG-09 24-AUG-09
184 24-AUG-09 24-AUG-09
184 24-AUG-09 24-AUG-09
185 24-AUG-09 24-AUG-09
SEQUENCE# FIRST_TIM NEXT_TIME
185 24-AUG-09 24-AUG-09
186 24-AUG-09 25-AUG-09
186 24-AUG-09 25-AUG-09
187 25-AUG-09 25-AUG-09
187 25-AUG-09 25-AUG-09
188 25-AUG-09 25-AUG-09
188 25-AUG-09 25-AUG-09
189 25-AUG-09 25-AUG-09
190 25-AUG-09 25-AUG-09
31 rows selected.
SQL> select * from v$dataguard_status;
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Informational 0 1 0 NO 25-AUG-09 ARC0: Archival started
Log Transport Services Informational 0 2 0 NO 25-AUG-09 ARC1: Archival started
Log Transport Services Informational 0 3 0 NO 25-AUG-09 ARC2: Archival started
Log Transport Services Informational 0 4 0 NO 25-AUG-09 ARC3: Archival started
Log Transport Services Informational 0 5 0 NO 25-AUG-09 ARC4: Archival started
Log Transport Services Informational 0 6 0 NO 25-AUG-09 ARC5: Archival started
Log Transport Services Informational 0 7 0 NO 25-AUG-09 ARC6: Archival started
Log Transport Services Informational 0 8 0 NO 25-AUG-09 ARC7: Archival started
Log Transport Services Informational 0 9 0 NO 25-AUG-09 ARC8: Archival started
Log Transport Services Informational 0 10 0 NO 25-AUG-09 ARC9: Archival started
Log Transport Services Informational 0 11 0 NO 25-AUG-09 ARCa: Archival started
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Informational 0 12 0 NO 25-AUG-09 ARCb: Archival started
Log Transport Services Informational 0 13 0 NO 25-AUG-09 ARCc: Archival started
Log Transport Services Informational 0 14 0 NO 25-AUG-09 ARCd: Archival started
Log Transport Services Informational 0 15 0 NO 25-AUG-09 ARCe: Archival started
Log Transport Services Informational 0 16 0 NO 25-AUG-09 ARCf: Archival started
Log Transport Services Informational 0 17 0 NO 25-AUG-09 ARCg: Archival started
Log Transport Services Informational 0 18 0 NO 25-AUG-09 ARCh: Archival started
Log Transport Services Informational 0 19 0 NO 25-AUG-09 ARCi: Archival started
Log Transport Services Informational 0 20 0 NO 25-AUG-09 ARCj: Archival started
Log Transport Services Informational 0 21 0 NO 25-AUG-09 ARCk: Archival started
Log Transport Services Informational 0 22 0 NO 25-AUG-09 ARCl: Archival started
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Informational 0 23 0 NO 25-AUG-09 ARCm: Archival started
Log Transport Services Informational 0 24 0 NO 25-AUG-09 ARCn: Archival started
Log Transport Services Informational 0 25 0 NO 25-AUG-09 ARCo: Archival started
Log Transport Services Informational 0 26 0 NO 25-AUG-09 ARCp: Archival started
Log Transport Services Informational 0 27 0 NO 25-AUG-09 ARCq: Archival started
Log Transport Services Informational 0 28 0 NO 25-AUG-09 ARCr: Archival started
Log Transport Services Informational 0 29 0 NO 25-AUG-09 ARCs: Archival started
Log Transport Services Informational 0 30 0 NO 25-AUG-09 ARCt: Archival started
Log Transport Services Informational 0 31 0 NO 25-AUG-09 ARCi: Becoming the 'no FAL' ARCH
Log Transport Services Informational 0 32 0 NO 25-AUG-09 ARCi: Becoming the 'no SRL' ARCH
Log Transport Services Informational 0 33 0 NO 25-AUG-09 ARCl: Becoming the heartbeat ARCH
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 0 34 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Fetch Archive Log Error 2 35 16191 YES 25-AUG-09 FAL[server, ARC0]: Error 16191 creating remote archivelog file 'stand'
Log Transport Services Error 0 36 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 37 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 38 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 39 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 40 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 41 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 42 12518 YES 25-AUG-09 Error 12518 received logging on to the standby
Log Transport Services Error 2 43 12518 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 12518.
Log Transport Services Error 0 44 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 2 45 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 46 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 47 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 48 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 49 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 50 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 51 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 52 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 53 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 54 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 55 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 0 56 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 57 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 58 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 59 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 60 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 61 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 62 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 63 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 64 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
Log Transport Services Error 2 65 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.
Log Transport Services Error 0 66 1017 YES 25-AUG-09 Error 1017 received logging on to the standby
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP MESSAGE
Log Transport Services Error 2 67 16191 YES 25-AUG-09 PING[ARCl]: Heartbeat failed to connect to standby 'stand'. Error is 16191.and when i issue these statements in my stand by the output is.
SQL> select * from V$managed_standby;
PROCESS PID STATUS CLIENT_P CLIENT_PID CLIENT_DBID GROUP# RESETLOG_ID THREAD# SEQUENCE# BLOCK# BLOCKS DELAY_MINS KNOWN_AGENTS ACTIVE_AGENTS
ARCH 4504 CONNECTED ARCH 4504 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3440 CONNECTED ARCH 3440 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5504 CONNECTED ARCH 5504 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5352 CONNECTED ARCH 5352 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5344 CONNECTED ARCH 5344 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 1320 CONNECTED ARCH 1320 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5088 CONNECTED ARCH 5088 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3416 CONNECTED ARCH 3416 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5916 CONNECTED ARCH 5916 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5776 CONNECTED ARCH 5776 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4744 CONNECTED ARCH 4744 1560521699 N/A 0 0 0 0 0 0 0 0
PROCESS PID STATUS CLIENT_P CLIENT_PID CLIENT_DBID GROUP# RESETLOG_ID THREAD# SEQUENCE# BLOCK# BLOCKS DELAY_MINS KNOWN_AGENTS ACTIVE_AGENTS
ARCH 1144 CONNECTED ARCH 1144 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5900 CONNECTED ARCH 5900 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4848 CONNECTED ARCH 4848 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5560 CONNECTED ARCH 5560 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4672 CONNECTED ARCH 4672 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 400 CONNECTED ARCH 400 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4996 CONNECTED ARCH 4996 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5356 CONNECTED ARCH 5356 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5800 CONNECTED ARCH 5800 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3104 CONNECTED ARCH 3104 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 6100 CONNECTED ARCH 6100 1560521699 N/A 0 0 0 0 0 0 0 0
PROCESS PID STATUS CLIENT_P CLIENT_PID CLIENT_DBID GROUP# RESETLOG_ID THREAD# SEQUENCE# BLOCK# BLOCKS DELAY_MINS KNOWN_AGENTS ACTIVE_AGENTS
ARCH 2400 CONNECTED ARCH 2400 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3712 CONNECTED ARCH 3712 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4248 CONNECTED ARCH 4248 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5580 CONNECTED ARCH 5580 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 3160 CONNECTED ARCH 3160 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 4436 CONNECTED ARCH 4436 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 5116 CONNECTED ARCH 5116 1560521699 N/A 0 0 0 0 0 0 0 0
ARCH 1488 CONNECTED ARCH 1488 1560521699 N/A 0 0 0 0 0 0 0 0
MRP0 4464 WAIT_FOR_LOG N/A N/A N/A N/A 687453795 1 189 0 0 0 0 0
31 rows selected.Regards
Poorna -
Ssrs 2008 and Kerberos both work separately; but not together
Sorry that this question is very similar to some others that have been asked on this forum. Unfortunately, none of the solutions I've been able to find here or elsewhere have solved my problem.
I'm trying to create some reports on data in a SharePoint site. SharePoint is version 2010 and my SQL Server Reporting Services (SSRS) is running off of SQL Server 2008 (NOT 2008 R2). Both these systems have been in use by my organization for some time and
sadly upgrading them is not practical in the immediate future.
I know that I have Kerberos working properly on the Reporting Server because I created a test report that draws data off of another SQL Server -- not a SharePoint site -- and I can demonstrate a successful double-hop by running that report from a client
machine such as my development PC. (authenticates client -> ssrs server -> data server with no problems)
Since SSRS 2008 and SharePoint 2010 aren't directly compatible (from what I've been able to find) I've set up SharePoint as an XML data source within my report. I know that the data source is working and authenticating on it's own, because
if I access the report server web service directly from the machine that's hosting SSRS, I can run my SharePoint XML data source report properly.
However, when I try to run the SharePoint XML data source from a client machine (thus requiring a double-hop) I receive the following error:
The remote server returned an error: (401) Unauthorized. (rsXmlDataProviderError)
All of my SharePoint web applications are set up to use Kerberos authentication, all of my SharePoint and SSRS service accounts are set up for delegation, and I've checked my SPN's numerous times to ensure that there are no duplicates and that all involved
servers and ports have been accounted for. My SSRS config file has authentication set to "Negotiate."
I'm obviously missing something, but I've reached the point where reading troubleshooting guides and set up instructions is just leaving me repeating things I've already tried. If anyone has any advice that could point me in the right direction on this problem,
I would greatly appreciate it!Hi,
Have you checked the following similar article if you used the "Credentials stored securely in the report server" option? Please let us know your results.
http://stackoverflow.com/questions/15033100/error-while-passing-credentials-from-ssrs-to-sharepoint-data-source
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ab4ce91f-f1db-4567-a40a-7a11d02cbc05/ssrs-and-sharepoint-list-the-remote-server-returned-an-error-401-unauthorized?forum=sqlreportingservices
http://blogs.technet.com/b/rob/archive/2011/11/23/enabling-kerberos-authentication-for-reporting-services.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support -
There is a workaround. When I use private window, my internet banking application can work as per normal. This is unlike in the past where it can work in normal window in Firefox 20 or earlier in Mac.
Private windows do not have your site-specific history of cached files and cookies. So, you could try this in a normal window:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r (MAC: Command+Shift+r) to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
(WIN) orange Firefox button (or Tools menu) > Options > Advanced<br>
(MAC) Firefox menu > Preferences > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Tools menu > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help? -
Mu external hard disk partition is not working. In get info it says that "hou can read only" bow can I fix this?
Read this:
http://smallbusiness.chron.com/fix-permissions-imac-external-hard-drive-48257.ht ml -
I'm using Linux Mint in a Lenovo S400 lap-top. I had to remap my slash key for X because the scancode of the key is actually Right-Ctrl (go figure!), and all my programs are recognizing this configuration. But in firefox my remapping takes no effect, and the slash key actually selects text if I'm in a form, or makes a thin bar appear at the bottom of the screen.
Any help is welcome!Can you reproduce in safe mode or a new profile?
* [[Troubleshoot Firefox issues using Safe Mode]]
* [[Use the Profile Manager to create and remove Firefox profiles]] -
Bridge CC Output Module fix works on WIN7, not on MAC OS X
I have CC installed on a WIN desktop and a MacBookAir. Everything is up-to-date. The are no old Adobe versions installed.
I installed the recent 'fix' on the desktop and it works fine.
On the MBA, there is no folder as named in the Adobe instructions (Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions).
There is no "Extensions" folder, just the Mac OS: /Library/Application Support/Adobe/Bridge CC. This is where I copied the file and folder. The 'OUTPUT' module appears as a selection in Bridge, but does not appear when selected.
I have tried the sugested trouble shooting fixes, to no avail. I have searched and read the other threads on this subject on the forums.
Is there anyone who has made this fix work on OS X and can help me correct this?On the MBA, there is no folder as named in the Adobe instructions (Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions).
To me this seems to indicate you are looking in the wrong library.
The give path for install needs to be done in the library from your system itself: MacBookAir (or the name you gave it) / Macintosh HD (or the custom name you gave to your start up disk) and then library / App sup / Adobe/ Bridge CC Extensions
I believe you are trying to install in the user library and there is only a BridgeCC folder -
Router works with PC, not with Mac?
My dad just bought a MacBook pro in the U.S and we are now enjoying our holidays in the Cook islands. Now, vacation is good and all, but one needs to keep up with the events in the world.
Now, there is internet connection in the house we are renting, and it works fine with the owners laptop, which im currently using. However, when I try to connect it to the Mac, it just wont work. And the ports of the router, stops blinking?
What is it that causes this problem? Is it because the router is not compatible with Mac, or is it some settings one has to change?
PS. Sorry if this seems obvious, however this is the first Mac i've ever tried to configure. Thanks in advance!Im connecting with an Ethernet cable, and as said, it works fine with the PC.
But then when plugged into the Mac the router stops blinking (doesnt send any data whatsoever) and it says that a cable is not plugged in.
The router also sends wireless signals, however, the owner has forgotten the password (we've tried with the ones he suggested but they didnt work) however the wireless also works fine with the PC.
I've restarted the router, ive checked that the cable is properly inserted, ive switched the slots and nothing makes it wanting to co-operate with the Mac.
I guess this could be a router problem since its not a "famous" brand link D-link. Its some random, i would guess local, brand... supposedly thats the problem?
Thanks for any help -
I have a macbook that I bought second hand. The mac has a dual boot system with bootcamp on one side and snow leopard on the other. I would like to be able to hook to a larger hdmi monitor so that in both systems I could see better since on the leopard side the computer has PS4. I have purchased the dvi to HDMI accessory and purchased the HDMI to DVI cable, and can see fine on the bootcamp side, but nothing on the leopard side. Could somebody help me with configuring things so that it will see both side?
Also on a minor note, I need to purchase a new battery for this item and don't know which one to purchase. Any help would be greatly appreciated, especially with the display/monitor issue.
Thanks Sue
ps sorry but the operating system is OS XWhen you try to use the Mac side on your external monitor do you get a blank screen or do you see the aurora background?
It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here. -
my iphone is able to charge when i connect it to my computor, but no matter what i do, will not show up on itunes. i have tried resetting both the computer and the iphone and nothing is working.
Type "ipad not recognized in itunes" or similar into the search bar at the top of this page by "Support".
-
Is this an airport express problem?? Only Youtube and google doesnt work. Its not work only on wifi from airport express. I really have no idea about technical problem.
After the last upgrade, my itunes doesn't open (this happen only the first time after the start of my pc). It seems frozen.To re-open Itunes i need to terminate APS deamon every time from task manager.
What is Apple doing to solve this problema? Thank you. -
[AS3] EventDispatcher works locally but not remotely
Hi,
I am very new to Action Script and have the following
problem. I hope someone can point me in the right direction.
I have a small video player app. I have added the FLVPlayback
component to the stage and set some properties via action script
(AS 3)
I then instantiate a class to go and retrieve some XML,
register an eventListener to wait for the XML to be loaded and once
the event has fired, load the FLV file (just hard coded at the
moment) into the FLVPlayback object.
This works when testing in the Flash IDE but not when I
publish the movie to my webserver. I have tried commenting out the
player.load() and just adding a textfield and again this works
locally but not when I publish to the webserver. I have included
some code snippets below.
Can anyone tell me where I am going wrong?
Any pointers much appreciated.
Thanks
MartinHi,
I found the problem if anyone has the same issue. I was
passing some FlashVars in incorrectly using the
AC_RunActiveContent.js that comes with Flash. I have switched to
swfobject and all is well.
thanks -
How can Image sliding work in flash cs4 on mac using mx.controls.loader
Hi i started working in flash after a long time. i am creating a virtual catalogue DVD for my client. to work on it quickly, i used mx.controls.loader component to call jpg images in my movie.i just gave contect path in component inspector. my working OS platform is windows xp. and everything is working perfectly fine. i used actionscripting on buttons to slide images left and right. when my client opened it in mac everything else was fine but images were not loading. although the directory path everything is right and working here but not in mac.
Hi Mate - I'm using CS4 Extended Ps v11.0.2, according to the Adobe site photoshop instals a 32 bit version only. How can I find out exactly by checking out preferences etc? I'll have to go hunt out the box.
Thanks for the reply. -
Internal boot drive not mounted -- Mac does not restart
Hi everyone,
I've got a problem with my 2013 MacBookPro 13" with OS X 10.10 Yosemite.
It seems that somethings wrong with my internal boot drive. I wanted to start my Mac but the grey progress line stopped at about the half and didn't continue. I tried to boot in secured mode --> not possible. I loaded recovery mode and wanted to check and repair disk utilities but I cannot hit those buttons because my drive is not mounted and cannot be mounted. I also tried to connect my Mac via Firewire with another Mac in Target Disk Mode --> Drive could not be mounted. Finally I tried to mount my drive on a Windows and Linux computer --> not mounted :-(
Is there another possibility to mount my drive or to access my data somehow? The thing is that I do not have a backup and that is why I need to access my data and store them somewhere prior being able to do a clean reinstall of my Mac.
Thank you for your support.
MarkusBoot into the Recovery volume (boot with the Command + R keys held down), select Disk Utility and try to repair the disk and disk permissions. If you're able to reboot normally and see that works.
If not reboot into the Recovery volume and reinstall the system.
If you can't boot into the Recovery volume mamau08 may be right in that the drive has failed.
Maybe you are looking for
-
Trying to update beige G3 to OSX 10.2 without DVD drive
I have a beige 233 mhz G3 that my elderly mom is using with a dial-up modem. It has OS 9.2, and just keeps chugging along nicely. I wanted to try upgrading it to OS X 10.2 so my mom would have some of the advantages of X, but without success. Problem
-
HT204053 What if I share the iPad with another user?
How does iCloud work on the iPad if you share it with another user with their own account?
-
Hi all, Earlier we were getting same document no. For Billing document and FI Document for Billing VF02 but since last few documents the numbers are not coming same for Billing and Accounting documents, please advice.
-
MacBook Pro Battery Life Draining After Updating to Yosemite
Hi, I have a 2011 MacBook Pro. After updating to Yosemite a few months, I have experienced a severe loss of battery life. I was averaging around 6-8 hours on a charge, and that is now down to about 3. I have reset the PRAM, etc. and SOMETIMES that wi
-
My iPod is frozen on the "Do Not Disconnect Screen." When it finally registers on iTunes(it sometimes takes multiple tries) it gives me the pop up: "Itunes has detected an iPod that appears to be corrupted. You may need to restore this ipod before it