Blend complete rather than Move complete?

After I issue an absolute move on a closed loop stepper axis with PCI-7344 using flex_Start, the Move Complete bit never gets set, but the Blend complete bit does. Since, I'm waiting in a loop for the Move Complete bit, the program (VB 6.0) hangs. Why would the Blend Complete bit get set rather than the Move Complete bit?

You might want to check first that you have the latest NI-Motion 5.2 driver. Then, check your Move Complete Criteria because it might have all the conditions disabled hence never gets a flag. Blend Complete checks also for a Motor Stop and Profile Complete bits to be set and then it sets itself. Anyways, focus on why the Move Complete Criteria does not flags, the NI-Motion Software Reference Manual will show which function to use to set it up and the bitmap order. If you need further assistance on this issue I would recommend you to contact NI Support, www.ni.com/ask.
Nestor S.
Nestor
National Instruments

Similar Messages

In CS4 when moving an image it duplicates rather than moves

When I have a logo on my artboard and try to move it. It duplicates rather than moves. I can't get this to stop. Any Ideas??

My guess is you are on 10.6.5 or 10.6.6 on the mac.
There is a technical problem between apples updates and Adobe creative suite. There is no official one solution, and Adobe has been aware of this problem for a few months now. The problem is that modifier keys are doing the opposite or being held down always.
http://forums.adobe.com/message/3296632#3296632
If you are on 10.6.5, you might as well update to 10.6.6 before anything. Try this utility. The name is scary because of hack, but is is safe and made by and Adobe employee Jesper Bache.
http://www.bache.name/download/osx/10_6_5%20keyboard%20hack.dmg
Also try updating firefox, and disabling dropbox if using that.

How to export as .MP4 or .M4v rather than .MOV?

I have a PS3 which supports MPEG-4, however when I export "movie to MPEG-4" it creates a .MOV Quicktime file rather a .MP4 or .M4V. The PS3 doesn't support .MOV. The only way I can find to export with .m4v is to use the AppleTV default which reduces the 1080 res to 540. I can't find a way at all to get a .MP4
So how do you export a 1080 iMovie as a 1080 .MP4 or .M4V format? Is this a handicap of '08 and something you could do in iMovie HD?
I really wish the AppleTV would support higher bitrates and 1080i, but that's another topic.

Use Share/Export using Quicktime...
Pick h.264 as codec and set up for 1920x1080 with a high data rate.

In Organise Bookmarks/Search I want to move a search result bookmark into a different folder, but it "copies" rather than "moves" - how can I "move" it?

Having got a list of bookmarks as the result of a Search in "Organise Bookmarks", I want to move one of the resulting bookmarks to a different folder.
If I move the bookmark into a folder on the left hand pane - it copies it.
If I hold the shift key down and move it - it copies it.
If I hold the control key down and move it - it copies it.
If I hold both the control and shift key down, the icon does change from a "+" sign to an arrow, but - you guessed it - it still copies it.
All I want to do is a simple move!
I'm probably doing something daft. Please let me know what it is!
I'm using Firefox 17.0.1 if that's of any relevance.

Hello mara1618, go from Firefox button > Bookmarks, touch the folder and when expand all folder bookmarks, drag the bookmark you want to another folder.
thank you

I just installed the latest iMovie 10.0.2. Please don't say "look at the help menu" - it doesn't help. This is radically different than the version I'd been using. For starters it automatically converts to mp4 rather than .mov - that's my 1st question

Sorry for the long headline - I'm new to the support community and thought that was the post! I've been happily using my old version of iMovie - I don't even know the number - I guess it was 11? I just installed the most recent 10.0.2 and it is radically different from what I've been using. For starters, whereas my uploaded video used to be in the lower section, and I would edit up above, now it's reversed. Whereas I used to click on the transitions and drag a blur or whatever to my movie right while I was editing, now it's on a different screen. And the easy old Export file button is gone, where you could choose setting, file size, export as Quicktime movie - all gone - now it converts to mp4 and I STILL can't figure out how to get it back to .mov
Please don't say "read the Help manual" - I tried - there's nothing there about any of this. And by the way, I'm not a techie - I taught myself what I needed to know about the old iMovie and am now lost so please no snarks. I would appreciate any help.

Select in browser your movie, click Export on toolbar, choose iTunes, QT etc. then choose size of your file in opening window. And then click Export in this window.

How to launch a folder action on save (rather than move)?

Hello people. I'm working in Yosemite.
I'm trying to create a folder action that keeps an up-to-date backup of MS word documents in a separate folder.
Word for Mac does not allow me to save this backup in a separate folder. I have tried to create a folder action that simply moves any file with the word "Backup" in the title, and this works for files that are dragged into the folder, but not for files that are saved into the folder.
Any suggestions on how to mover forward? I need a sort of "on save then apply filter" action.
Thanks

Record that action do not put a save in it. After you have that action saved with no documents open in photoshop use menu File>Automate>Batch... in the batch dialog point to the action set and action, point source to your folder of images. In desternation use the pull-down menu and choose Save and Close.

HT201976 With Family sharing can you share specific iTunes Playlists rather than the complete library?

With Family sharing can you share specific iTunes Playlists rather than the complete library?

With Family sharing can you share specific iTunes Playlists rather than the complete library?

HT201976 With Home sharing can you share specific iTunes Playlists rather than the complete library?

With Home sharing can you share specific iTunes Playlists rather than the complete library?

With Home sharing can you share specific iTunes Playlists rather than the complete library?

How can i move songs to my playlists using my iphone rather than computer?

How can I move songs to my playlist using my iphone rather than my computer?

@allamb & stephanW
I found this thread via a search, I have a new iphone 5 (also i am completely new to iphone, having been the last few years on android) and i have spent 20 minutes trying to figure out how to add a song to a playlist.
You see i sit a work and listen to dozens of tunes, and i want to add a paticular song to a particular play list, and low and behold I can't, excuse my special characters but "What the f#%k itunes/apple??? - how can this be? Such a commonly needed function and for itunes to be the number music player in the world not to have this feature is ludicrus.
I am lucky that i only have about 500 songs on my iphone thus far, i feel sorry for stephanW with 4000+ !!
Apple - please fix - this is schoolboy programming stuff...

Blend complete set before blend is complete

I have a set of 32 XY coordinates that are fed to the PCI-7344 using the flexBlend function. I wait for the blend complete bit to be set prior to passing the next set of coordinates. This works except for the final set of coordinates where the bit is set immediately following the issuance of the flexBlendStart command. Is it possible that I am checking the status of the bit too soon following the start command? This condition occurs every time the code is executed.

ctsnc,
Having read over your post, I believe the behavior that you are seeing is the expected behavior for the blend functions. Blending is merely a smooth transition from one move to the next. The actual move that follows is not part of the blend. (If you think of this in terms of a manual transmission automobile, 3rd and 4th gear would be moves, and shifting would be the blend. Once the car is actually into 4th gear, the blend is complete).
In this context it makes sense that after issuing your final set of coordinates and checking the blend complete status, that the blend has already completed. This is because there are no blends left to occur. In the case of your final move, you would probably want to check whether the move has completed instead of checki
ng if the blend has completed.
Regards,
Jed R.
Applications Engineer
National Instruments

How do I move multiple clips at once in the project rather than one a time?

I know how to cut and then paste to move one clip within the project to a new place within the project, but how do I move a group all at once rather than one at a time?

This did not help and that did not work. I had already tried that Holding down either the command key does "highlight" multiple items but then you cannot move those items to a new spot.

I'm getting the rainbow wheel when I try tp pen in internet page (Safari). The page half loads then appears to freeze with the rianbow wheel. I get the same result when I try to stream a movie from NETFLIX. Freezes up rather than plays (after loading).

I get the rainbow wheel when I try to open an internet page. It loads halfway, then freezes, with the rainbow wheel whirring around. Smae thing happens when I try to stream a movie on Netflix. The movie loads, then the wheel shows up and the screen freezes. Same thing when I try a DVD, it takes the disc, but won't play when I hit on PLAY.
I am repair permissions, and all that I can do, but I am a novice. Any help would be greatly appreciated because I spend big bucks and drive 40 miles to get Apple help.
Sharon in the woods of Idaho

Welcome to Apple Support Communities.
If your profile info is up to date, you probably have a 2006 or 2007 MacBook with a CoreDuo or Core2Duo.
It probably came with 512MB or 1GB RAM memory and a 60, 80, or 120GB hard drive.
You're still running OS X Tiger, 10.4.
Your DVD drive may be dirty or wearing out.
For specifics about your computer, click on the  Apple Logo in the menu bar, then About This Mac, and More Info... to find details.)
You may be running short of hard disk space. You should have at least 10% free, or 10 to 15GB free for best performance. Less than that, and your hard disk is spending lots of time searching for places to store data.
Complex web pages and sites like Facebook and Twitter, and pages using Adobe Flash, and high-bandwidth applications like video streaming from NetFlix can all cause your computer to run slowly, and the fan to run at high speed, because the processor is working hard. Conversely, email is not terribly resource-intensive, and probably still works pretty well.
Several things can each provide a small performance increase (listed in no particular order):
Adding more RAM memory. Upgrade to 2Gb to give your programs a bit of 'breathing room', especially if you are running more than one program at a time.
Erasing the hard drive and reinstalling the current operating system and programs from scratch. This erases all your existing programs and data. Unless you have backups and program discs, you lose everything currently stored on it.
Installing a higher capacity, faster hard disk, say 250GB or 320GB will give your programs and data more space, and perhaps faster access if you replace the factory 5400rpm drive with a 7200 rpm drive. If your current hard disk is nearly full (less than 10% free space), the drive has to 'thrash' to free space to store information.
Upgrading the operating system to OS X 10.5 Leopard or OS X 10.6 Snow Leopard. Both are discontinued OS X versions, still available to order directly from Apple, but not likely found on a store shelf any longer. An upgrade to OS X 10.7 Lion might not be possible for your MacBook (details here: http://www.apple.com/macosx/how-to-buy/), and Lion would likely cause a further slowdown, because honestly, Lion is optimized for newer, faster dual-core or quad-core computers with fast video chipsets and 4GB or more of RAM.
A faster internet connection, for example: I switched internet providers to get a 3.0Mb DSL connection (up from a 512Mb connection) for an extra $10 per month, and saw downloads and internet browsing speeds increase dramatically. With the slower connection, it was not possible to watch video.
Will all of these upgrades together get you close to the performance of the latest MacBook Air or MacBook Pros? NO!
Ultimately, you have a 4- or 5-year-old computer, and spending up to several hundred dollars for upgrades might not be a worthwhile investment for you, versus applying that much money toward the cost of a new(er) Mac, and perhaps passing your MacBook on to a friend, child, or grandchild who needs mainly email capability.
If a brand new Apple is not in the budget, consider a refurbished Mac from the Apple Store online. These are reliable computers from 'last year's models' and have the same 1-year Applecare warranty as a brand new model, and often sell at a discount of 10 to 30 percent of the price when the model was introduced.
I'm using a mid-2007 MacBook, purchased as a refurb from Apple in late 2007. It came with 1GB RAM, a 120GB 5400 rpm hard drive, and OS X 10.4 Tiger. Over the years, I've upgraded it twice. Firs to 2GB, then to 4GB RAM, to a 320GB drive, then to a 500GB 7200 rpm hard drive, and to OS X 10.5 Leopard, and then to OS X 10.6 Snow Leopard. Rather than one more round of upgrades to OS X 10.7 Lion, I'm saving for a newer MacBook Pro or MacBook Air at some time in the future.

Adobe Captivate 4 - How do I include the playbar in the movie, rather than below it?

Hi,
As the title says, how can I have the playbar displayed inside the movie window rather than as a seperate entity below it?
We used Captivate 1 up until recently to make our training videos. We would use the playbar "PresenterSilver" and then insert text boxes into the slides as a sort of guide as to what section the user was currently viewing. We would also use this to show the author and the date. A static image was used as a background also (this was created in Fireworks to look the same as the PresenterSilver background).
This setup worked fine for all our movies. However when we upgraded to Captivate 4 the PresenterSilver skin is no longer there. The playbar is also no longer part of the movie but is below the window.
I was wondering if it possible to include the playbar the way it used to be. If not, then can someone suggest a work-around? I was looking at it earlier and I see that you can use image files as backgrounds around the player. This is not ideal as I think that the images remain static for the entire movie. And we could not have a set image (e.g. Part 1 for slides 1-3, Part 2 for 4-6 etc.) for different slides, it would have to be the same the entire way through. If I am mistaken please let me know.
Thanks for your help,
Eoin.

Hi there
Unfortunately Adobe changed the playing field with version 4. You are no longer able to have the playbar occupy part of the main movie.
Please report this as a bug to the development team. The link is in my sig.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Linking rather than embedding movies

Hi,
I have been using Keynote for several years and have always embedded my movies within my presentation (i.e., selecting "copy audio and movies into document" during the initial save). Despite embedding the movies, I still keep a local copy of each in the same directory.
I'd like to, at the very least, link to rather than embed movies in future presentations, but don't know how that will affect portability. I often create my presentation on one machine and present using another. To that end:
1) Does anyone know how Keynote stores the location of media files that are not embedded? Are they absolute or relative?
2) Also, is there any way to "undo" embedding in existing Keynote files for which I had selected "copy audio and movies..." the presentations were created?
Thanks in advance.
- Matt Walter

>Someone probably knows better then me, but can't you
embed the font in the library and then refer to it programatically?
Yes, you can do this, but this is a bit kludgy in my opinion.
I'd rather not HAVE to know that there is a font in the library
that I need to use. I'd rather be able to take the font of a
textfield that I am already using and then use the font that is
already embedded in that textfield to create create new textfields.
Creating a font symbol in the library is just adding extra
weight to the SWF file. If I have a textfield on the stage that
already has the font outlines, then adding the same font to the
library is just extra weight. But again it's not just a weight
issue - I'd rather not have to know that the font is in the library
to begin with.
I'd rather be able to say "Hey, you know that textfield on
the stage? well, use the same font for a new textfield? What's the
font that the textfield is using? I don't know and I don't care.
Just use the same font."

Is it safe to just store my purchased iTunes movies in the iTunes cloud rather than filling up my Macbook Pros hard drive?

Is it safe to just store my purchased Itunes movies in the Itunes cloud rather than filling up the Macbook Pro's hard drive with HD content?

Not safe, no. The movie's owner can remove a movie at any time, which does happen from time to time, making it impossible to re-download later. You should always keep a backup copy of any app or content that you care about.
Regards.

Blend complete rather than Move complete?

Similar Messages

Maybe you are looking for