Blend connects then disconnects immediately

No problem with Z10, pc and ipad using leaked OS, yesterday I installed OS 10.3.1.1565, SW 10.3.1.2243 OTA from carrier.
Now Blend verifies, connects and immediately disconnects via pc and ipad. Sometimes I get a message to switch Blend on and even to reboot the Z10.
Solved!
Go to Solution.

Sadly I´m facing the same problem here. Using it on an iPad Air 2 with iOS 8.1.3 and a Blackberry Classic and Q10, both on the latest OS Versions available to me (both on 10.3.1565). The Blend App on the iPad is updated as well. It does show me both of the phones when I log in to the BB ID in Blend on iPad, it does connect to both phones, but then it immediately shows "not connected". Tried to redownload the App, checked if connections where allowed ohn the phones, the Wifi is working fine (checked 3 different Wifis to make sure), IPv6 on the router activated and deactivated, but no change at all. Sad thing is that when you read the comments on the Apple App Store regarding the Blend App, it does seem that its quite a common problem, for a bit of a while now, but seems that they can't fix it. Also wanted to report the problem from the App via report button on the top left corner of the App, but somebody slept while programming it as it seems since there is the Mail App starting with a prepared Email, but the address where the mail should be send to is missing. Its a sad story, Blend is a great idea, but executed absolutely **bleep**ty! Ah, and obviously on my Mac, I´m facing the same problem as many others here, the Programm doesn´t start at all and doesn´t send an error message, so I have no chance to find the problem... Would be good if we could get some info from Blackberry, but this is the only plattform for official support for the app as far as I can see...

Similar Messages

  • IPod keeps connecting then disconnecting immediately... help?

    So, I bought my iPod nano in April and it worked perfectly until about 1 month ago when my computer suddenly stopped recognizing it, and now whenever I try to connect it it disconnects after 1 second, then connects again, then disconnects etc etc....
    I know this is a known issue cause as I've been trying to solve this for one month I've done some searching and seen plenty of other people having the same problem, but no one seems to have a resolution that works.
    Basically my exact same problem is described in these 2 threads:
    http://discussions.apple.com/thread.jspa?threadID=2240335&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=1847791&start=0&tstart=2
    I've done every thing suggested but no luck... I went back to the store as well and they didn't find anything wrong with it, so obviously it's my computer (I tried it at my mom's work as well and it worked there) but I don't know what's causing the problem. I don't wanna get my iPod replaced or buy a new one because it might just as well happen to that one too and then I'm stuck in the same boat again. Getting a new computer isn't really an option either. :/
    So, any kind of help that hasn't been suggested already would be highly appreciated...
    thanks in advance

    Similar problem here too plus when I do manage to get them to connect they will not charge.
    Both my classic iPods work fine, in all my computers, and show that they are charging, but my family have 3 nanos, a 4th and two 5ths. Although they all connect to my PC and my laptop fine, none of these will connect correctly to my daughters PC no matter what USB port I put them in.
    I have checked in device manager that the ports are powered (500ma) and nothing else is there to infringe on this supply. Still these items connect and disconnect constantly. Ironically every now and then, they will connect and allow me to look at the files etc in iTunes. I have at one point had two nanos and my classic connected to her computer and they all worked fine for about an hour, I thought that I had finally got rid of the problem but one by one the nanos started to play up again so this exacerbates the problem somewhat.
    I also get various warnings when the Nanos are trying to connect like, software driver failure to install, it will work faster in a high speed USB port, nano needs formatted to work in windows plus a host of others. When I plug them back into my PC they connect fine, so that all adds to the confusion. If this was one nano I would suspect that it was faulty but it is three different ones.
    I have done the 5 Rs, I have even gone as far as upgrading from XP to Windows 7, I have plugged the units into every USB port, I even bought a new PCI/USB card and tried that and still this problem persists.
    I would like to hear from someone with any suggestions as to what is causing this and how to fix it.

  • Why does my iPod Classic keep connecting THEN disconnecting immediately?

    Here's the deal, I bought my iPod Classic used, and is the 160GB version in "space gray".
    I connect my iPod Classic, and immediately it disconnects itself right away(!!). I would have searched a question, but let's face it, all the other info is now out-dated. So please, help!

    Hello, Cam Roughfoot. 
    Thank you for visiting Apple Support Communities. 
    If your device is not recognized by iTunes, your computer or disconnecting randomly, try goring through the steps in the attached articles below. 
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    iTunes: Resolve USB-related alerts
    http://support.apple.com/kb/TS5254
    Cheers,
    Jason H. 

  • When i plug the USB for my iPad into my computer it will connect then disconnect over and over again untill i wiggle the usb around alot. This is happening to all my ports. But not on the other computer.

    Hi. Whenever i plug my iPad (Happens with ipod and iphone too) to my computer usb for itunes is will connect, then disconnect over and over again. It has happened for a long time but doesnt happen on my other computer. how do i fix this?

    If you have a spare cable, try using that.  But the fact that this doesn't happen on your other computer (I assume using the same old cable) leads me to conclude that something else is at work.  Maybe even the "bad" computer.

  • Ive deleted something, not sure what but my Ipod connects then disconnects. It doesnt come up on my Itunes or 'My Computer' Whatever happened, it deleted my music of my pod! Someone pleaseeee HELP!

    Ive deleted something, not sure what but my Ipod connects then disconnects. It doesnt come up on my Itunes or 'My Computer' Whatever happened, it deleted my music of my pod! Someone pleaseeee HELP!
    1. Ipod connects then disconnects
    2. Ive deleted my Itunes then d/l the new Itunes
    3. Ipod doesnt show up in Itunes
    4. Ipod doesnt show in 'My Computer'
    5. Ive reset my ipod
    6. Ive put it in Disc Mode
    & after all of that still nothing except an ipod that works but with no songs or videos!!
    HELP ME AHHH!!
    Thankyou

    Do the iPod Disk Diagnostics as posted by tt2, it wont fix your problem, but helps in troubleshooting.
    Post the results, so we will try to help.

  • IPhone 4s keep connecting then disconnecting with new MBA

    Hi,
    New MBA i5/4g/128 arrived this afternoon. During few hours of setting all my stuff, everything works just fine.
    But when I try to connect my iPhone 4s with a official cable, it keeps connecting then disconnecting(about 2 times per second) and won't stop.
    Is there anyone met the same issue? please help. Thanks!

    Thanks for the reply
    I've tried 2 cables at home. 1 is a offical cable and another one is a 3rd party cable, both of them didn't work, and both of them work perfectly with other PCs.
    After read your reply, I decide to try another 3rd party cable at office, it worked.
    No idea why, but maybe MBA choose cable more sensitively?
    Anyway thanks a lot and have a nice day!

  • When charging phone it connects then disconnects over and over

    for some reason tonight when i am charging my phone it keeps disconnecting. i haven't done anything to the phone today other than using it. itunes says to restore but the phone keeps connecting then disconnecting. what should i do? take it in to at&t? no apple store around me.

    AT&T doesn't do repairs. Either need to take to Apple store or call 1-800-MY-IPHONE and choose for the "ship it in" option where they will send you a pre-paid return box to ship it in and send it back to you after.
    However, issue could be your cable, or your computer just having issues as well. If you have access to another cable, I would try that, also with a reboot. I would also see if you can charge with the wall adaptor with your current cable, if you can, it may just be your computer is having an issue with it.

  • I have an iphone 4.my wifi was working fine on ios 6.1.3.but since i upgraded to ios 7 ,the wifi randomy disconnects,then connects ,then disconnects again and again???

    i have an iphone 4.my wifi was working fine on ios 6.1.3.but since i upgraded to ios 7 ,the wifi randomy disconnects,then connects ,then disconnects again and again???

    Try going to settings/general/reset/reset network settings and do that

  • Insignia headphones connecting then disconnecting.

    I am relatively new to Bluetooth and I wanted to use Bluetooth headphones with my Mac Mini. I bought the Insignia NS-BTHDP headphones/headset and it has successfully paired with the Mac Mini as indicated in the Bluetooth preference pael. When I first turn the headphones on the indication will change to "connected" but within a few seconds it changes back to "not connected" and the indicator lights on the headphone alternately flash blue and red indicating that it is in pairing mode. I tried disconnecting both the Bluetooth mouse and Bluetooth keyboard to see if it was a bandwidth problem but this did not help. In the Bluetooth preference panel I have selected to use the Insignia as headphones and not a headset. I am sitting less than 10 feet away when trying to get it to connect so it should not be a distance problem.
    Any suggestions?
    TIA

    having same problem w/ a Southwing headset/headphones. just started recently. set will pair, connect, then disconnect. also does same thing w/ older motorola earpiece headset. both devices worked fine until one week ago. i've tried everything still can't get "connected" to hold.

  • Ipod keeps connecting then disconnecting

    I've tried everything possible to try to make my Ipod mini work. I can't connect it to the PC because it keeps connecting and disconnecting repeatedly. I can't restore it since I can't connect it. I've tried all the different USB ports and I've installed and uninstalled all the programs a few times. I've also reset it connected and disconnected. It has worked before but now it won't! This is driving me nuts

    Similar problem here too plus when I do manage to get them to connect they will not charge.
    Both my classic iPods work fine, in all my computers, and show that they are charging, but my family have 3 nanos, a 4th and two 5ths. Although they all connect to my PC and my laptop fine, none of these will connect correctly to my daughters PC no matter what USB port I put them in.
    I have checked in device manager that the ports are powered (500ma) and nothing else is there to infringe on this supply. Still these items connect and disconnect constantly. Ironically every now and then, they will connect and allow me to look at the files etc in iTunes. I have at one point had two nanos and my classic connected to her computer and they all worked fine for about an hour, I thought that I had finally got rid of the problem but one by one the nanos started to play up again so this exacerbates the problem somewhat.
    I also get various warnings when the Nanos are trying to connect like, software driver failure to install, it will work faster in a high speed USB port, nano needs formatted to work in windows plus a host of others. When I plug them back into my PC they connect fine, so that all adds to the confusion. If this was one nano I would suspect that it was faulty but it is three different ones.
    I have done the 5 Rs, I have even gone as far as upgrading from XP to Windows 7, I have plugged the units into every USB port, I even bought a new PCI/USB card and tried that and still this problem persists.
    I would like to hear from someone with any suggestions as to what is causing this and how to fix it.

  • Ipod keep connecting then disconnecting... What do I do?

    I have a 4th generation Ipod nano. I tried to connect it to my computer to put new songs on it, but when I plugged it into the usb connector it went crazy. It goes from being connected to being disconnected, connected to disconnected... It continues untill I finally remove my Ipod. It never shows up on Itunes during the process either. What should I do?

    Have you tried connecting it to a different USB port on your machine? Maybe attempt to restart the iPod (which will take it out of Disk Mode) by toggling the hold switch on and off a few times, then pressing and holding the Center and Menu buttons together until the Apple logo appears.
    Maybe also attempt to use a seperate USB cable to sync the iPod with.
    How long will it stay connected? Does it appear in "My Computer"? If it does (for a long enough period of time), maybe try reformatting it using the tools provided by windows.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    If still no luck, also try plugging your iPod into a different computer if possible, to see if the problem lies with the iPod or computer. If you can get it hooked up to a second computer OK, I would recommend restoring it via iTunes.
    B-rock

  • Mini connects then disconnects from Windows Vista

    I recently upgraded to Windows Vista Premium, and my 80gig iPod connects and syncs no problem to iTunes 7. I also have a 4gig mini that when I plug in the USB cable, Vista configures successfully and I can see the iPod as a drive and in device manager, and all is well until I open iTunes. As soon as I open iTunes, the mini shows up, but then Vista says it disconnects, then it reconnects, then disconnects, over and over. Has anyone else had this problem with Vista and their Mini??? Anything I should try??
    4GB Mini   Other OS  

    I left it plugged in over night and there is no change... I actually have 2 Mini's and the problem occurs with both, but not with the new 80GB iPod.

  • Ipod Connecting then Disconnecting 2 seconds later

    Please help, my ipod is connecting to the computer, not showng in itunes and then disconnecting 2 seconds later, ive tried rrestarting and different usb ports and different wires but still no luck!
    Please,
    Clare x

    Have exactly the same problem with my wife's MacBook Air. After restaring in Restore mode and trying to repair the disk (Disk Utility showed errors in the verification), the system tells me to backup as much data as possible (how?), re-format the disk and restore backed-up files. Error comes up when "updating boot support partitions for the volume as required".
    Original restart action was done due to software update requesting it, if I remember correctly, iTunes was updated.
    I don't want to start a painful back-up procedure (although I do regular back-ups): how should I know, where iPhoto stores it's data or where my mails are (yes, still using local mail)? How can I access the data if I can't boot?
    My iMac's disk crashed also a couple of months ago and I'm still recovering. I have four Apple devices, two of them have failed. Can Apple afford such a ratio?

  • Bluetooth connects then disconnects

    Hello all. I have a nextel i880 phone that when purchased I was able to link it with bluetooth and it worked fine. So when I go to connect it, the connection is there then it disconnects. Im not sure if there is something going on with my software. My phone is fine. But this is really boggling my mind. Why does it connects and then disconnects. Thanks J.L.

    Hello all. I have a nextel i880 phone that when purchased I was able to link it with bluetooth and it worked fine. So when I go to connect it, the connection is there then it disconnects. Im not sure if there is something going on with my software. My phone is fine. But this is really boggling my mind. Why does it connects and then disconnects. Thanks J.L.

  • TS1398 Wifi connects then disconnects

    It is trying to connect to wifi then halts and reverts back to 3G. It was working yesterday, do not know why it stopped. Have 2 other iPhone 4 and IPod still working

    Hi bobmyron,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like the Mac will connect and disconnect from two different networks. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    Wi-Fi Quick Assist - Apple Support
    Wi-Fi and Bluetooth: Potential sources of wireless interference - Apple Support
    Recommended settings for Wi-Fi routers and access points - Apple Support
    Cheers,
    Mario

Maybe you are looking for

  • Short Dump while executing ALV Grid.

    Hi All, I m getting a short dump while trying to execute an ALV. The dump exception is of type CX_SY_DYN_CALL_ILLEGAL_TYPE class. The message displayed is :  " Call to form 'GI_FIELDCAT' is incorrect .The actual parameter in PERFORM is different data

  • Mac mini and WDTV Live

    My Mac mini (10.7.4) needed the following workaround in order for my WDTV Live to see my min's HD. http://wdc.custhelp.com/app/answers/detail/search/1/a_id/8538/c/130/p/208,393 The directory on my main HD is visible in LINUX, not NFS as noted. Works

  • Problems with certain mail attachments after moving them to a different folder in Mail

    I am using Mac Mail as my default email client, and every once in a while when I move a message with an attachment from one folder to another (for example from my Inbox to my Personal folder) in Mail, the attachment will no longer show up, but rather

  • Charging my lumia 710 causing messages to be unabl...

    The problem with the charger used to be infrequent and easily fixed by turning the phone off and on, or by taking out the battery. Now it happens about 50% of the time I plug the phone in. After it's been plugged in, when i go to press the send icon,

  • Handling a payload only if a trigger file is available,

    Hi XIons, I have an inbound scenario. The flow is: X.trg and X.dat files (FTP Location)>Communication channel picks *.trg File> Module read the name of File> Modules picks the .dat file with same name> sends it to FCC in the comm. Channel--> sends to