Blending modes: PSE vs PS

A subject I don't know well is blending modes. I saw an interesting book about this, but it was written about Photo Shop. Is there a difference in the blending modes between PSE10 and PS? TIA

If you ever get far enough into blend modes that you do want subtract and divide blend modes in photoshop elements:
divide:
Invert the layer (Crtl+I) (mac Cmd+I) or (Filter>Adjustments>Invert) and then change the layer blend mode to Color Dodge.
subtract:
change the blend mode of the layer to linear burn and then invert the layer (Crtl+I) (mac Cmd+I) or (Filter>Adjustments>Invert)

Similar Messages

PSE 12 Blending Modes

Sometimes blending modes don't work when I apply them to a photo. Why would this happen. I tried restarting PSE 12 but that didn't help.

I have a photo of a flower shop on layer 0. No other layers. That layer is selected. I select various blend modes but the photo never changes. Previously the difference mode gave a very dramatic effect on another copy of the same photo. Now none of the blend modes work.
I'm going to try shutting my Mac down completely and restarting.

Learning blending modes

I've learned most of what I know about PSE from a certain magazine from England. But in their step by step instructions, you are told to use this or that blending mode, but not why.
Are there any threads on here that expalin what the different modes do and when to use what? I've tried to do search but didn't work.
Thanks
Ricih

http://www.ronbigelow.com/articles/blend1/blend1.htm
The above is a set of tutorials that includes tables listing practical uses of blend modes for photographers.
His examples are done using photoshop but the blend modes are the same in both Photoshop and Photoshop Elements. Layer masking is used to constrain the blend mode effects to portions of the photos. With elements, you will need to use an adjustment layer so you can hijack the mask. If you are just going to blend the image with itself, create a levels adjustment layer...leave it at the default setting and click ok to accept. Adjust the levels adjustment layer's blend mode and opacity if desired. This will act just as if you were working on a duplicate of the image...and you have a mask.
If blending two different images, use a clipping mask/group. Here's a link on info about using clipping masks/clipping groups...same thing different name.
http://www.photokaboom.com/photography/learn/Photoshop_Elements/layers/layer_groups_clippi ng_masks/1_layer_groups_clipping_masks.htm
Other tutorials that cover blend modes...
http://www.northlite.net/ps/blend.htm
http://www.photoshopessentials.com/photo-editing/layer-blend-modes/
http://www.photoshoptut.com/photoshops-blend-modes/
http://www.psdtop.com/blog/basic/understanding-blending-modes/
Still one more...don't read #20 as it covers advanced masking (Blend If) that isn't available in Photoshop Elements.
http://www.teamphotoshop.com/articles-The-Techniques-Layer-Blend-Modes-Explained!-5,8,65a. html
Edit: That last link you'll have to copy and paste it into your browser to get it to work. It's not linking correctly.

Smart Object and blend mode issue

I have an object that I moved from another image and needed to resize. The object is an image of a bottle and glass, with both the bottle and glass having reflections from their base. They both also have some layer masks with the reflections. I grouped the glass and bottle and created a smat object before the move to the new file). Anyway everything worked fine, except the reflections are much stonger in the new file (they are sitting over the same colored backgrond as in the original. If I open up the smart object and put a background behind the images and the reflections (background is transparent)everthing looks as they should. The reflections have a blend mode of multiply).
So why does the smart object not render the reflections properly (without lowering the opacity more within the smart object group) they appear almost at 100% in the new file. Any suggestions?
Can't post the files as this happened at work.
Thanks
Jeff

Anything to do with soft proofing? Does the new document have the same colour space as the original?

How to change blending mode on multiple layers at the same time

I'm using CS5. I have a document with about 70 layers. I would like to change the blending mode to "lighten" for each layer. Is there an easy way to do this?

Photoshop doesn't allow multiple layer editing. That's why the styles are grayed out. Only 1 layer at a time.
What version are you talking about?
CS5 definitely let’s one apply a Style to multiple Layers.
rfcommagere, I don’t know how to make it much clearer:
• set the Blending Mode on one Layer
• with that Layer selected create a Style with »Include Layer Blending Options« checked
• select all other Layers that should have that Blending Mode
• click the Style in the Styles Panel

Is there a way to get the result of using multiple blending modes in one object?

Hello,
I wonder if there's a way to merge multiple objects with blending modes to one object. Here is the example:
On the left rhere are three objects with the same appearence but different blending modes(color dodge, normal, overlay), on the right they are overlapped, which are still three object. I'm looking for the way to have the same result as the right overlapped one, but as one object. Having the same multiple objects only for the result of color blending mode uses too much memory for my computer.
Thank you for your help in advance.

create one object: then in your appearance panel, duplicate the fill twice. Select the top fill and expand the sub menu, click on opacity, choose blending mode. repeat.
G

Hue Blend Mode Confusion

Hello,
In reading about the Hue blend mode, I have come to understand (perhaps erroneously) that given two layers (T)op and (B)ottom, that if the Blend Mode of T is set to Hue, then the hue information in T will be blended with the saturation and luminosity in B, which essentially means that the hue information in B is replaced by the hue information in T. However, in running some experiments, I've noticed that when dealing with a very simple document comprised of two layers only, that setting the Blend Mode to Hue also changes the saturation and brightness.
Here are the steps to duplicate the observed phenomena using two regular layers:
Create a new blank document.
Fill with the color that corresponds to the HSB values (0, 70, 50).
Add a new layer above the existing layer (blend mode Normal).
Fill the topmost layer with the color that corresponds to the HSB values (230, 70, 50).
Using the Info panel, the HSB values for the document should read as (230, 70, 50).
Change the Blend Mode of the topmost layer to Hue.
Using the Info panel, the HSB values for the document should read as (230, 70, 50), but instead read as (230, 66, 53).
And here are the steps to duplicate the observed phenomena using a regular layer and an adjustment layer:
Create a new blank document.
Fill with the color that corresponds to the HSB values (0, 70, 50).
Add a Hue/Saturation adjustment layer (blend mode Normal).
Adjust the Hue value in the Properties panel for the Hue/Saturation adjustment layer to be -130.
Using the Info panel, the HSB values for the document should read as (230, 70, 50).
Change the Blend Mode for the Hue/Saturation layer to be Hue.
Using the Info panel, the HSB values for the document should read as (230, 70, 50), but instead read as (230, 66, 53).
The results in both (for me) are identical. Am I misunderstanding the Hue blend mode?
Thanks,
Matt
Photoshop Info:     13.0.1 x64 Extended
OS:                        Windows 7 64-bit
CPU:                      Dual Xeon E5440
RAM:                     16 GB
Video:                    Nvidia GeForce GTX-580

Hi Chris,
Thanks very much for your straightforward and helpful answer. So, it would appear that my simplistic understanding of the Hue blend mode as 'replacing' the hue of the underlying layer(s) is incorrect. Would a fair rendering of what the Hue blend mode actually does be as follows?
"The Hue blend mode will perform a direct replacement of the hue in the underlying layer(s). The brightness and saturation of the underlying layer(s) will not be affected *unless* the resultant hue, saturation, and brightness 3-tuple would result in an illegal HSL combination, in which case the saturation and brightness of the resultant pixels will be altered to bring the HSL values into compliance."
Also, is there a way for the Info panel to display HSL values?
Thanks again,
Matt

CS4 bringing photoshop layered files into illustrator - blending modes

Hello.
I have a layered photoshop file that is being brought into illustrator. One layer is a drop shadow and is set to multiply within photoshop. The drop shadow is NOT an effect. It's just a plain layer of a drop shadow. When I bring it into illustrator it doesn't act as if it is set to multiply when placed over my illustrator object. I know it's easy enough to make the shadow within illustrator and set the blending mode there but I would like to know why this is not working.
Thanks in advance for the help.
-PB

Illustrator's blending math is not the same as Photoshop's -- there will be differences if you import/export layered data between the apps.

Has anyone ever encountered layer blend modes behaving strangely?

I use photoshop quite a bit for retouching and photo compositing. Tonight I encountered a strange problem. I was trying to create a vintage look on a photo and had a number of adjustment layers including a curves, levels, color fill and there were also a few texture/noise layers all set to varying opacities. Near the top of all this I had a vignette layer that was black around the edges and white in the center set to blend mode of multiply. Well, when I was clicking on and off I realize that that vignette layer was definitely lightening the center part of the overall image quite a bit (the part that is white on the vignette layer), almost like a screen. So I flipped the vignette layer through different opacity modes and saw that there was no change in its behavior, every mode was screening the white, even darker color and multiply. I thought maybe it was interacting in a weird way with one of the other layers so I turned all the others off except the back ground-- still no change. Then I dropped the layer down one at time until it was below the background. When I started to move it up again, it was behaving normally for a moment until I moved it up a couple levels in the stacking order and then it went back to the screen behavior. Anyway I shuffled it around a bit but there was no consitency to when it would display the correct opacity and when it wouldn't, so it did not seem to be an interaction with any specific layer. I don't know, but I can't really think of any case where white set to multiply should produce a lighter result even if it were interacting with another opacity. In any case it does seem to me that there is something going on with the overall computation of opacities. I tried creating a new black and white layer and it was also doing the same thing, behaving strange and not displaying the correct opacity.
I'm tired, so I'm going to bed. I'm going to shut off the computer and hope this goes away when I reboot, but if it does not, does this sound familiar to anyone? I'm not a regular visitor to this forum, but I thought I'd put it out there in case anyone else has experienced anything like this. I've only got 5 gigs of ram on this computer and I've been working away for a while... maybe photoshop just couldn't keep up(?) I'm using Photoshop CS5, RGB Adobe 1998 colorspace. I've never had anything like this happen in the last 11 years I've been using photoshop. Hmmm.... hope I don't have to reinstall or call support or worse. fingers crossed.

Nevermind. It is still having the problem. I have to think that this file is just corrupt somehow because I just opened another file and can't seem to cause the same problem. Basically, I can fill a layer with white, put it to a blend mode of multiply or darker color and it will block out everything of the image below, ie totally opaque. The opaqueness varies depending on the if there are other layers also on blend modes, but it does not seem to correspond to normal blend mode interaction. If I put it right on top of a regular layer with an image on it, it totally blocks it out on a blend mode of multiply... weird. I am going to scrap this file and see if the problem recurs in other files. My 2006 Mac Pro is getting some years on it and has been running pretty slow. I'm not a hardware expert but I've done everything I know how to do to maintain it. Was thinking of upping the ram to see if I can hold out a bit longer before I upgrade the computer. Wouldn't surprise me if this problem is related to the computer.

How do I mask a path with a blending mode so that if only effects the groups below?

I am working on a logo but have run into what seems like a simple problem but nothing about masks that I have found seems to work. I have
two groups and in one of them I have a path with an overlay blending mode. Above both groups I have the same path with the same blending mode. (I have used two as I wanted a stronger effect on the lower group)
Here is the project against white:
As you can see the logo itself looks fine and I thought it was ready to use.
However upon exporting it I noticed that the layers with opacity that where invisable agaist the white where now visable. I ussumed this would eb a simple fix as I am used to this problem with After Effects. Illistrator is not my forte and I am not used to how the masks work.
After two hours of messing around and searching on the internet for answers I have given up. This must be a common thing to pop up but I couldn't find the answer so here I am. Please can someone help me remove the unwanted white circles.
Thanks,
Ben.

Thank you for replying Monika,
I have copied the Paths but dont understand what you mean by expand the 3D effect. With the text I was able to click ungroup and edit the individual sides. I am unable to do this with the logo, I dont know exactly why. Also when I combine all my paths they just go into one group. You will have to excuse me, I still have a lot to learn.
Thanks,
Ben.

Blending Modes

Hi All,
I am creating a flyer in InDesign, I've got a logo to put at the bottom of the flyer, the logo is white with a black background, I've used the Screen blend mode to remove the black but I can now see a faint white space behind the logo... see attached image. I have Proof Colours, Overprint Preview & High Quality Display to show the neareat possible match to print.
I've tried Googling and reading up about the Blend modes, it says something about changing the option in Edit > Transparency Blend Space
I changed it to RGB and now the white space has gone but the article I found did not explain too much about what this means changing it and how it works when printing the finished artwork.
Can anyone give me advice on this?
Always appreciated
Regards
James

I've tried Googling and reading up about the Blend modes, it says something about changing the option in Edit > Transparency Blend Space
When you use Screen for the blend mode your black background has to be absolute black for to be completely transparent. If you want to keep your Transparency Blend Space as CMYK and your logo is a CMYK object, the black background has to be absolute CMYK black (100|100|100|100 and not 0|0|0|100):

CS5.5 Blending Modes Won't Work?

Being an avid user of AfterEffects CS4, the transition to CS5.5 was painless.. Except for the fact that the blending modes don't work. This has halted all my projects.
What happens is that when I select a blending mode, nothing happens. It shows that I set the layer to 'add', but absolutely nothing happens. I just got CS5.5 yesterday, so I haven't changed any settings that could mess it up (That I know of).
Any help would be appreciated!!!

I'm confused. Blending modes require two or more layers. They work to blend one layer with the layer beneath it. But you only have one layer. How are you determining that blending modes aren't working?
See this for basic information about blending modes.

Can I sample a layer's "true" color despite its opacity and blend mode?

I'm doing some painting with a lot of layers set to different blend modes. I find that every time I want to paint on one of these layers, I have to go to that layer, set the opacity back to 100, change the blend mode back to "normal" sample the color, then change everything back and continue painting. I realize I can save a swatch for the color, but it can get confusing when you're using subtle color differences on multiple layers. It seems like there should be a modifier key to the tool that samples the layers "true" color discarding opacity and blend mode. Does this exist? Thanks!

Perfect! This is exactly what I'm looking for chris....I don't suppose there's any way to toggle the tool's "current layer/all layers" functionality on the fly so i don't have to go to the tool and select which mode I"m in each time is there? I usually access this tool by just hitting "option" while using a brush. Would be cool if i could set "Option + shift" to use the eyedropper in "current layer" mode. Thanks for the speedy reply!

I can't set a layer blend mode to "Screen"

Hello, I'm new to Photoshop as of an hour ago (I've been using GIMP for 2 years).
I have a layer selected and I want to set the blend mode to "screen". However, the screen mode as well as several others are greyed out and won't let me select them. I'm using Windows 8 Home Premium 64 bit, and Photoshop CS6 Extended (Trial) 64 bit. I'm intending to get Adobe Creative Cloud tomorrow, but is the reason for this that I'm using the trial version? If not, what am I doing wrong? There is a screenshot below to show what I am talking about. Any help would be appreciated. Thank you!
http://i1289.photobucket.com/albums/b504/thomasbowe34/ps_zpsc5e055f5.png

Took me a few second to figure out whats wrong. But the answer is, you're in the 32 bit mode. Changing the mode to 16 or 8 { (Image>Mode>8Bits/Channel) or (Image>Mode>16Bits/Channel) } will make it available.

Aliased text on PDF export with blending modes

So I've had this issue with a pdf, I tried to export it CMYK, RVB, interactive pdf, regular pdf, with tons of different other options, the text was still very aliased.
I decided to take it back from scratch, openned a new document with the same size, and copied/pasted element after element from the old one to the new one, exporting as pdf between each copy/paste. The first exports went really well, the render was great… until I pasted a vector element that was applied with a blending mode (overlay).
When I switched it to normal, the pdf export was smooth again. Tried every blending mode, everyone makes the text jaggy. Switch back, it's ok. So I'm 100% sure that this comes from blending modes, as opposed to what I could have read on other forums.
This is a request, please, InDesign team, take care of this problem, this is quite annoying in many cases.
Thank you for your attention!
Twitted here as well : https://twitter.com/grinderlabs/status/448381486627311616

To minmize the possibility of rasterizing or outlining text when transparency is flattened, keep the text above any transparent objects. Blending modes, along with most effects, use transparency.
You can also minimize the risk by exporting the PDF with live transparency, which is supported in Acrobat 5 or higher compatibility.

Blending modes: PSE vs PS

Similar Messages

Maybe you are looking for