Blending only one edge of a cutout? Not linear

I've cut a person out of a photo, but the edges of the persons hair looks a bit weird. (See below)
I wanted to use something like the Refine Edge/Feather tool to blend it into the background to look more realistic, but that applies to all sides of the selection.
How should I go about blending the edges of the persons hair without compromising other parts of the image?

I did delete the background by selecting it and clicking delete. I didnt use the layer mask but the video link showed me how to correctly use the Refine Edge tool and I've been able to get a result:

Similar Messages

After upgrading to IOS 5.0.1 my music and movies are gone - I have only one song. Sync does not put my media back

I upgraded my Iphone4 to IOS 5.0.1 when plugged into my fully-patched OS X Lion-version Mac. I no longer have any movies and only one song on my phone. Itunes says I have all of my movies and music, but my phone does not show it. I do have my books (but not audiobooks)

I made a work around. Set my phone to not sync music and movies in itunes. Sync phone. Set my phone to sync music and movies in itunes. Sync phone.
It is very time consuming though.
And, what else is set incorrectly somewhere and I do not know it? There was also a very weird glitch - where "Albums" is listed in when running the music app in IOS5 (5.0.1), it instead had had the name of the one song! That is now also fixed.

Auto loading of username and password are taking place on one site and only one site and I do not want this to happen but can"t get it to stop.

As my question states I don't want auto loading on any site and it only happens on this one site. I have went thru tools and options and there are no sites listed for auto loading. There are no saved passwords. If I go to the site using Internet explorer the problem does not occur.

Ok, no problem i found this help articles:
https://support.mozilla.org/en-US/kb/how-clear-firefox-cache
http://www.youtube.com/watch?v=OukBlXfOP8Y

I need to deauthorize only one computer, but I do not have the computer available to me

We just bought a new computer for my daughter and she needs to set up iTunes. The problem is that our account says there's five computers already authorized and we only have three in the house. How can I deauthorize the ones we no longer own or have? Only options at the sight are, deautorize all or this computer.
thanks

You will need to de-authorize all your computers, then re-authorize the ones that need it.
I quote:
If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
Click iTunes Store on the left side of iTunes.
If you're not signed in to the store, click the Account button, then enter your account name and password.
Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
In the Account Information window, click Deauthorize All.
Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).

How many laptops can I install on with only one lightroom 6 license? (not cc version)

I read from somewhere that one creative cloud account can be used on two different devices, but what about the lightroom 6 version?
If I pay $149 for lightroom 6, how many laptops can I install on? I now have one windows laptop and one mac.
Thanks for helping.

I selected yours as the correct answer because of the webpage you provided, but I cannot understand that what "only use it on one computer at a time".
If the software is for offline use, how does it know if I'm running it on another computer?

Burning only ones and next DVD will not burn

I never had a problem, now I can burn only first DVD (70min). The next DVD it's normally should take not more than 20 min. The setting speed is "Best". After inserting the DVD it runs hours and nothing happens. I have to force the iDVD to quit. I am using Verbatim DVD-R
Any help would be greatly appreciated.

The BEST way to make multiple copies is with a disk image. You create a disk image from iDVD (an option under FILE) and then use Apple's Disk Utility or Roxio's Toast Titanium to make as many discs as you want. Using the disk image approach, you can reduce the burn speed to 4x or lower (Disk Utility and Toast both offer this feature, iDVD 6 doesn't) which will make your burned discs more compatable with set top DVD players.
F Shippey

Selecting only one row at a time

Hi experts,
i have following doubt regarding selecting rows from a db:
Is there any way of selecting only one row AT A TIME from a dabase just to collect the data in rows instead of in a unique document containing all the rows?
I would like you to ellaborate on this as i need to send only one row to the IE, and then other row, and so on... without throwing any error!
I have seen that there are SELECT SINGLE and SELECT UP TO 1 ROW, but these two methods are only useful when retrieving only one row, and that does not match my requirements. I need to process all the rows but one by one..
I know that we can use the receiver jdbc adapter as if it was a sender by means of its specific datatype, but how to do it row by row??
Hope i had explained well..
Thanks in advance and best regards,
David

Hi kiran,
Yes, my table has 5 not null fields but i am selecting and updating fixes values so i think that I will definetely go for the next solution:
SELECT * FROM t1 WHERE status='0' and ROWNUM<2;
UPDATE t1 SET status='1' WHERE status='0' and ROWNUM<2;
My only concern is if the update will take the same row that the select.... BTW, I think it will
..What do you guys think?
I ve been trying to operate with your proposed queries but i received some errors. Your queries are very interesting but i think that with the above ones i meet my requirements as the status field will be 0 for not processed rows and 1 for precessed ones (and the update will look for the row that meets the same 'where' clause than the select, and then, and only then, it will set status='1').
The only thing i have to care about is what i questioned before.
Thanks a lot and best regards,
David

How to use only one event case at a time??

Using LabVIEW, using the event structure is it possible to have only one event case execute at a time. For example, having event case controlled by keyboard, and the other event case controlled by mouse (clicking buttons) and only one being able to execute, not simultaneously. I was considering using a switch of some sort, but each case does not have a "stop if true/false" so I am open to a new method or work around. I attached code. I do not want output to be able to be sent from the keyboard case and mouse case at the same time.
Thanks,
Andrew
Attachments:
WiFi Motor Control & Cam Stripped.vi ‏29 KB

Ah, OK. all you need is to keep state in a shift register that ensures that all "key down/mouse down" events are discarded after each key down/mounse down event until a key up or mouse up (resp.) has occured.
Overall, you code is still way to complicated for this simple task. For example, you could eliminate all these "select" primitives and place the approriate diagram constant inside the respective case. On the other hand it is too simplistic, because you would think that certain key combinations should be allowed concurrently (e.g. up and left).
What does the receiver actually do with the codes? Do you have any documentation for this device?
LabVIEW Champion . Do more with less code and in less time .

One record in MVTHEMBASEDFOI does not display

I am having an issue with OracleAS MapViewer Version: Ver11_B091229
Here is the setup.
I have to display incidents, as a point(s) on our Road Report map. These incidents are coming from a view,
which has been populated with a Geometry column and registered in USER_SDO_GEOM_METADATA.
I have created a theme in Mapbuilder, making sure that the incident view has a key column on it and turned Caching to ALL. I have to set the caching on this theme due to the fact the view can not be Spatially Indexed.
I'm using Oracle Maps to load the theme into the map as a MVThemeBasedFOI.
var themeI_A = new MVThemeBasedFOI('MDTINCIDENTS','DS_DEV.RRS_INCIDENTS');
Here's my problem if I have two or more records in the view the theme will display, but if there is only one record the theme will not show up on the map. I have reviewed the log from Mapviewer, but there is no error, and it does see there is 1 feature loading.
An interesting issue is that if I use themeI_A.zoomToTheme();
the map will zoom to the lowest level and the icon will show up, but if I pan the map it will go away or if I don't include the zoomTotheme command and zoom to where the one incident is it still will not appear.
As a side note the geometry is built from an LRS so the SDO_GTYPE is 3301 if that matters.
Thanks
John O'Mara
Montana Department of Transportation
http://roadreport.mdt.mt.gov/map/

sounds like a bug.
I'll contact you offline.

Since I installed the latest version of iTunes I cannot sync new downloads to my ipod. Before I installed this version I had two windows when I attached my ipod to my desktop but now there is only one. HELP

Since I installed the latest version of iTunes I have been unable to sync new downloads to my ipod. Prior to this installation I would get 2 windows when I attached my ipod but now there is only one. The software does not recognise the device (I tried running the doagnostic) but I can see it on my desktop. Anyone know what I can do?

Hi findmeat,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
About iTunes Radio
http://support.apple.com/kb/HT5848
Cheers,
- Judy

One of my playlist does not appear in iCloud

So only one of my playlist is not in ICloud how can I fix this , I've turned iTunes Match on and off a few time

Do you mean one of your playlists is not appearing on an IOS device but does show on your computer?
If so, what hardware & software are you using? Would suggest clearing the iTunes cache - have you tried this?

HT201287 Can I set up a group message and have myself to be the only one to get responses

I often send group messages about where the group will be going to dinner, or what time an event will be held. I am the only one who needs to get responses to the group message, but everyone in the group gets all responses which is aggravating to most of the group members. Is there a way to send a group message, with me being the only one to receive responses?

Not through the built in Messages app. There may be other group messaging apps that would allow you to do that. However, everyone you message would need to have he same app installed.

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

In IPhoto '08, Photos under Library, I'm no longer able to view a screen of thumbnails. I'm only able to view a single photo at one time. This was not true in the past.

In IPhoto '08, in Library/Photos, I'm no longer able to view a screen of thumbnails. I'm only able to view a single photo at one time. This was not true in the past.

Note the slider lower right of the iPhoto Window. Drag it left.
Regards
TD

Only one music video purchased from itunes is not playing on IPod

I purchased several music videos from itunes and they all seem to sync to my ipod just fine but one of them will not play. The other three I purchased is playing fine both visual and audio but only one will not play at all. When I click on it, the screen just goes black and after several seconds, returns me to the menu listing the name of the video. It plays on my daughter's ipod just fine and we both have the same IPod. I've tried to re-sync and reset but nothing seems to work. Can someone please help me. Thx!

It may be an authorization issue. Both iTunes and the iPod need to be up-to-date.
Usually, you need to play at least a part of songs purchased from the iTMS within iTunes to authorize them. They won't copy to your iPod until you do this.
How to transfer Purchased Music from iTunes to your iPod
iTMS Song and Computer Authorization
If you've played & authorized them in iTunes and they still skip, try this. De-authorize the computer in iTunes/Advanced menu, then re-authorize it. You re-authorize it by playing one of the songs purchased from the iTunes Music Store within iTunes. It should ask you for your Apple ID and password, and then the computer will be authorized again. Sync your iPod with iTunes, and those songs should play on the iPod once again.
Another common cause of this is not having the latest version of iTunes.
If you are using the latest version of iTunes (6.0.4), then you need to make sure your iPod software is up to date also. Get the iPod Updater software, install it, run it and update your iPod.
When you have done this, authorize your music in iTunes by playing a few seconds of it within iTunes, re-sync your iPod, and it should transfer by whatever synching method you choose.
If the above 'standard' fixes did not help, then it's a bigger problem that I can diagnose...

Blending only one edge of a cutout? Not linear

Similar Messages

Maybe you are looking for