Blending the past with ntsc color monitors..

An interesting adventure....
Trying to hook up an NTSC monitor for color correction to my iMac. It's a sony monitor and can be calibrated properly by turning off all the tubes, except for the blue during cal.
The only issue is that this is an older monitor, and I'd need to get a DVI to RGB or a
component (Y, R-Y, B-Y) for my computers video card output.
However I'm scared that my iMac9,1 may not be configured to use this sony monitor, I've heard of many stories where people get the minidisplay monitor adapters to VGA adapters but become frusterated because their computers were unable to hook up to the monitor in the first place.
So my question basically is....do I need to be concerned about an older sony monitor hooking up to my iMac?
Thanks so much, saving me here...
Message was edited by: wdjjjkjkm

Similar Messages

Inventory status for a date in the PAST with BATCHES with VALUE

Hi,
How can I get a status REPORT of all inventory as on a date in the PAST with BATCH numbers and VALUE?
The following ready reports do not solve my problem:
1. Inventory Status: This gives CURRENT date inventory QUANTITY only.
2. Inventory in Warehouse Report: This gives CURRENT date only, no BATCHES.
3. Inventory Audit Report: Doe not give BATCH numbers and ignores qty without transactions.
4. Inventory Valuation Report: Meant for "what-if" only.
5. Inventory Posting List: Does NOT give BATCH numbers
6. Batch Number Transactions Report: Doe NOT give VALUE.
I suppose an SQL will be required for this requirement?
Thanks,
Ajay Audich

Hi Rozario,
Thanks for the pointer. Could you or anyone of the gurus out there have a code for doing this which will achieve this?
Thanks,
Ajay
Edited by: Rui Pereira on Dec 9, 2008 5:08 PM

My network symbol keeps working on my home page even when I'm not doing anything, I know there has been problems in the past with this so has it come back, help it's killing my battery!

My network symbol keeps working on my home page even when I'm not doing anything, I know there has been problems in the past with this so has it come back, help it's killing my battery!

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

May a user change the paste board (background) color in acrobat 9

I have a customer supplied file with a screen the exact same color as the background or pasteboard color in acrobat 9. So I cannot see the edge, I cannot see if there is bleed etc... This color is much darker than the gray background in acrobat 7 which I have bee using.
I find this background much to dark for my use and I would like to change it to a lighter gray as the paste board in 7.
Where is this preference?

I don't believe there is any way of changing the pasteboard (background) color in any version of Acrobat.
However, there are a couple of Page Display settings which may help:
Check "Always show document page size" to show the size of the document (trim size).
Check "Art, trim & bleed boxes" to show these features. You can open the the Crop Page dialog to show the size of any of these boxes.

Does Photoshop always blends transparent images with white color?

It looks like merged-image-data in PSD files contains RGB data which is blended with white color (based on transparency). Is that correct for all versions of Photoshop/PSD? Can I disable it or change that color?

I think you're misinterpreteting what you're seeing. In the specific example you cited, IrfanView is reading the flattened composite, assuming you're saving as a Maximum Compatibility PSD, as it hasn't the ability to mix layers.
Perhaps this flattened composite is what you're asking about.
In the actual layers of the file, when Maximize Compatibility is not specified, Photoshop puts pure white in the pixels where there is complete transparency, but for partially transparent areas there's no premultiplication.
Consider this sequence:
-Noel

How do I connect a camera to my macbook pro when using the computer with an external monitor in clamshell mode?

How do I connect a camera to the Macbook Pro when using the computer in clamshell mode with an exrternal monitor?

same as it ever was
do it like nothing is different.
be sure to have an external trackpad keyboard or mouse as you will loose them on the computer once it is closed.

With new Photos app, I can no longer drag and drop photos into other applications as I did in the past with iPhoto.

With the new Photos app, I can no longer drag and drop photos into other applications as I did with iPhoto. For instance, I have a photo collage app that in the past, I could just drag in the photos I wanted to include. Now, I can DRAG the photos, but they do not DROP. So, I have to go through the export process. It is tedious. What am I missing? Where can I turn on the drag and drop feature for Photos?

YOu're not looking in the right palce. That's inside the iPhoto Application.
You need to look inside the iPhoto Library
As I sid above:
Go to your Pictures Folder and find the iPhoto Library there
Regards
TD

I took a video using a tripod and I want to blend the video with a copy of the same video. How do I do that without making the video darker or lighter while keeping the opacity of the main video?

I dont want to the people in the main video to become transpartent (ghostly) I only want that to happen with the copy that I am overlaping. The copy will not be at the same starting point as the original, it will be slightly ahead. Everything ive tried has left the video lighter or darker then the original and it looks weird, it was used with a tripod so nothing changes in the video except for the posiioning of the people. I want to have like a trailing affect following the people, like you can get with your cursor on some computers its like its lagging behind? Its hard to explain, I hope this made some sense.. any suggestions would be great thanks.

Since you are disolving two shots together (rather than compositing or keying) it seems like you will always have some slight noticeable opacity as you are effectively bleinding two shots together at 50% opacity each. There is no way to maintian 100% short of keying or compositing. However with the background being the same in both shots the opacity shift should be very minimal.
Although you might consider trying the built in trailing effect in the filters browser and see how it looks, it might achive the effect you are attempting better than blending the two shots.

I have been fooled in the past with bad downloads but not from Mozilla Firefox have you sent this ????????

You are currently browsing the web with and your Video Player might be outdated
Please update to the latest version for better performance
Superior HD Video Streaming and Hardware Acceleration
Download Any Movies, Shows or Video Clips
Critical Security Patch and Bug Fixes
Richer, more immersive user experiences
Note:This Update is Free and Takes Under a Minute on Broadband No Restart Required

No, Mozilla doesn't send such a alert, so don't get fooled by it.
If you get a pop-up message asking to update Firefox or plugins then such a message is likely a scam and you should never respond to such an alert to avoid getting infected with malware.
*Only update Firefox via "Help > About" or by downloading and installing Firefox from the Mozilla server and never via a pop-up or link on a web page.
*Plugins should only be updated via the plugin itself or by visiting the home page of the plugin.

Custom Composed Look not appearing in Change the Look with custom color palette

Hi,
I created custom color palette, (which was a copy of one of the out of the box ones) and uploaded it to the Themes folder under a different name. I then went to the Composed Looks and created a new Composed Look(using the New
Items), which the seattle master page, and the new color palette that I created.
When I go to Change a Look, the new Composed Look does not appear as part of the options.
When I change the color palette of the Composed Look, to one of the out of the box ones, I see it I the Change a Look page.
What am I doing wrong?
Thanks

I would check two things. First, did you check in the spcolor file you created? Second, I would review all of the properties of your composed look found in "/_catalogs/design/AllItems.aspx". You might want to copy and paste all properties (except
title and name) and see if your new composed look shows up in "Change the look". Then link to your own custom spcolor file.
Eric Overfield - PixelMill -
blog.pixelmill.com/ericoverfield -
@EricOverfield

Pictures I have taken in the past with my iPhone 5 are now a block and when I click the photo it says loading but never loads. It's like I never took the photos. There's only the blocks with no pictures. I can't click edit or anything

I'm trying to look at my past photos in my camera roll but all that's there is a block and when I try to click on it the photo says "Loading" but nothing ever shows up. I can't click edit or anything. When I plug my phone in to my computer and open the photo folder they're not even there. It's like I never took these photos

I notice that the home page redirects to a secure (HTTPS) address. I wonder whether there is a setting blocking this? What if you go directly to a secure page -- will it load?
https://www.itvsn.com.au/include/sweb.dll/product?product=155602&category=92010&site_id=ITVSN
Your add-ons list shows AVG, ZoneAlarm, and McAfee products. Could one of them be blocking this site? See whether you can add exceptions or just disable them temporarily and test whether that helps.

I have changed my Apple ID, but then I cannot access all the apps and books I purchased in the past with my previous ID? How can I recover my purchased items?

I have changed successfully my Apple ID. But when opening iTune with my new Apple ID, I don't see all the apps and books I purchased before changing the Apple ID. I appreciate if someone would let me know why and how can I access to my purchased items again.
Thanks.
Kimchieu

If you are referring to an iDevice, sign out of your new Apple ID and sign back in with your old one - they should all be there.

Some sites I pull up in firefox load very small and almost unreadable. I have not had any problem in the past with these exact sites.

The sites I pull up seem to be half the size of normal. It normally has only been one site, but now it is happening to another site that I use frequently.

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r45
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages

What do I do if imported AAC files wont copy onto my iPhone? It has worked in the past with other imported files of the same type.

I have tried multiple times to sync a bunch of RHCP songs that i imported, but they wont copy onto my iPhone. I have tried isolating them in a playlist and syncing just that playlist and still nothing. please help. I have done this with other songs before and it worked fine but for some reason these ones wont copy.

I suggest taking it back to Best Buy. Once it has been opened, Apple will not handle the phone. Best Buy or another 3rd party are your only choices. Best Buy probably made an error when replacing the screen. Understand they are not an authorized Apple Service Center.

Is there anyway to provide the subforms with seperate colors

Hi Friends,
Is there anyway to give each subform or individual subform a distinguish color so that we can clearly see each subform.
Thanks.

Once the subform is created you can use the subformName.fillcolor to set a background color on the subform. Note that you will not be able to do this until the subform exists (after the script that creates it has completed).

Blending the past with ntsc color monitors..

Similar Messages

Maybe you are looking for