BLF/CallPickup/7960
I have set up the BLF/Spped buttons on a 7960 with a 7914. Simple question is will the call pickup work on on the butoons that it is programmed for. I can not seem to get it to work. I can see status change of the phone and I have the correct icon on the phone I just can not seem to push the button for picking up the ringing phone.
Thanks
Kevin
Hi Kevin,
Here is the related info :)
BLF Pickup Action
If a line is in the BLF alerting state, the local user can press the associated speed-dial button (BLF Pickup button) to pick up the call. The phone picks up the call on the next available line if the user does not first specify a line. If auto-pickup is enabled for the line, the call connects automatically; otherwise, the call rings on the local phone and the user must manually answer it.
Note Pressing the BLF Pickup button at a time when no BLF alerting indicators are present results in the phone speed dialing the associated directory number.
Unlike the existing BLF feature, BLF Pickup cannot be configured for a call log or directory listing;
***BLF Pickup works on a speed-dial line button only.
These BLF enhancements are supported on the following SCCP phones:
â¢Cisco Unified IP Phone 7975G
â¢Cisco Unified IP Phone 7971G-GE
â¢Cisco Unified IP Phone 7970G
â¢Cisco Unified IP Phone 7965G
â¢Cisco Unified IP Phone 7962G
â¢Cisco Unified IP Phone 7961G
â¢Cisco Unified IP Phone 7961G-GE
â¢Cisco Unified IP Phone 7945G
â¢Cisco Unified IP Phone 7942G
â¢Cisco Unified IP Phone 7941G
â¢Cisco Unified IP Phone 7941G-GE
â¢Cisco Unified IP Phone 7931G
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/rel_notes/6_1_2/cucmbe-rel_note-612_2.html#wp308676
Using Call Pickup Groups with BLF Pickup
The Busy Lamp Field (BLF) Pickup feature adds call pickup capability to BLF SpeedDial buttons. When enabled, this feature alerts a user when a BLF SpeedDial destination gets an incoming call so that the user can pick up the call. Call pickup groups control which phones a user can monitor and access. A call pickup group can now include a hunt pilot to support line group pickup.
An alerting call state makes the BLF Pickup button function available. When the user presses the BLF Pickup button, the phone picks up the call.
â¢If the monitoring device has multiple lines, the system uses the primary line as the pickup line or the next available line if the primary is not available.
â¢If the monitored destination is receiving multiple calls, the first call or the higher priority MLPP call gets picked up; any remaining calls continue to trigger the alerting status on the BLF Pickup button.
â¢If the user at a monitored destination answers the call before call pickup, the BLF Pickup button displays a busy status.
After call pickup, the BLF Pickup button status reverts to the current status for the monitored destination: idle, busy, or DND (when enabled with the "BLF Status Depicts DND" service parameter).
As admnistrator, you must modify the standard line button template to include the BLF SD option for users to invoke the BLF pickup feature. See "Configuring a Customized Phone Button Template for BLF SpeedDial Buttons" in the Presence chapter for more information.
The following phone models are equipped with BLF line buttons and support the BLF pickup feature: Cisco Unified IP Phone 7931, Cisco Unified IP Phone 7941, Cisco Unified IP Phone 7961, Cisco Unified IP Phone 7970, and Cisco Unified IP Phone 7971. The Cisco Unified IP Phone Expansion Module 7914 supports this feature when connected to one of these phone models.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/rel_notes/6_1_2/cucmbe-rel_note-612_2.html#wp308333
Did you have a look at these;
Cisco Unified CallManager Administration Configuration Tips
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/rel_notes/6_1_2/cucmbe-rel_note-612_2.html#wp308333
It almost sounds like the Pickup Groups have not been configured.
Hope this helps!
Rob
Similar Messages
-
Hi Guys,
My Customer is having the problem about DST (date summer time) specifically about IP Phone 7940 and 7960. When finish the date summer time this model don´t change the time, only after restart logical or phisical. I simulated the problem in the CUCM with the same version 8.6.2.22900-9 and the problem too occur. I did the following procedure to try solve the problem:
1) Put the lastest version firmware about IP Phone and didn´t worked;
2) Put the lastest version dst and didn´t worked;
I search about any bug related and didn´t found nothing.
Any have idea about this?
Thanks,
WilsonHi Wilson,
Try installing TZ updates with steps in the document:
http://software.cisco.com/download/release.html?mdfid=283782839&flowid=45898&softwareid=282074298&release=8.6%282-2013d%29&relind=AVAILABLE&rellifecycle=&reltype=latest
Please find the link for EOS and SW Maintenance for 7960
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/end_of_life_notice_c51-574072.html
Hope this helps!!
Regards.
Tirtha -
I am trying to locate an HP Photosmart 7960 printer install disk. Any ideas how to get?
Two questions....
I have an HP Photosmart 7960 printer and we have a new computer. We cannot find the install disk. I called HP and after about 2 hours of "help" was told that they can't support the printer anymore - it's too old. None of the on-line downloads from HP worked.
I have TONS of ink for this printer...
The ink cartridges are 56, 57, 58, and 59. If I cannot locate an install disk it may be worth my purchasing a printer that uses these cartridges. How would I find out what printers are available that use these cartridges?
This question was solved.
View Solution.So the basic drivers listed under the link below didnt work?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=305383&lc=en&cc=us&dlc=en&lang=en&cc=us&...
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee. -
Hi Guys,
I have a SIP trunk setup with a 2811 running CME version 7. I can make outbound calls ok but having issues getting the incoming calls working, i have 1 number on my SIP trunk and that is 01133501788 and i want that to ring my Cisco 7960 which is running SIP firmware not SCCP. I have included by config for anyone who can help me, i just want the incoming call to work.
Many Thanks.
Matthew.
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
logging message-counter syslog
no aaa new-model
clock timezone GMT 0
dot11 syslog
ip source-route
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1
ip dhcp excluded-address 10.10.10.1
ip dhcp pool DATA_POOL
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
dns-server 188.92.232.50 188.92.232.100
ip dhcp pool VOICE_POOL
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 188.92.232.50 188.92.232.100
option 150 ip 192.168.1.1
ip name-server 188.92.232.50
ip name-server 188.92.232.100
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
bind control source-interface FastEthernet0/1.20
bind media source-interface FastEthernet0/1.20
registrar server
voice class codec 1
codec preference 2 g711ulaw
codec preference 3 g711alaw
voice register global
mode cme
source-address 192.168.1.1 port 5060
max-dn 144
max-pool 42
load 7960-7940 P0S3-8-12-00
authenticate register
tftp-path flash:
create profile sync 0008072514198272
voice register dn 1
number 6999
allow watch
name SIP
label SIP
voice register pool 1
id mac 000F.902B.40E0
type 7960
number 1 dn 1
dtmf-relay sip-notify
username cisco password cisco
codec g711ulaw
voice translation-rule 1
rule 1 /^9\(.*\)/ /\1/
voice translation-rule 2
rule 1 /^6...$/ /4143*002/
voice translation-profile DiscardDigit9
translate calling 2
translate called 1
voice translation-profile IncomingSIP
translate calling 1133501788
voice-card 0
no dspfarm
username matt privilege 15 secret 5 $1$DCD0$SjWqnKgDSGVzzIKRerXh11
archive
log config
hidekeys
interface FastEthernet0/0
ip address 194.12.0.222 255.255.255.252
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface FastEthernet0/1
no ip address
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface FastEthernet0/1.10
description DATA
encapsulation dot1Q 10
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface FastEthernet0/1.20
description VOICE
encapsulation dot1Q 20
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 194.12.0.221
ip http server
ip http authentication local
no ip http secure-server
ip nat inside source list 1 interface FastEthernet0/0 overload
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 1 permit 10.10.10.0 0.0.0.255
tftp-server flash:P003-8-12-00.bin
tftp-server flash:P003-8-12-00.sbn
tftp-server flash:P0S3-8-12-00.loads
tftp-server flash:P0S3-8-12-00.sb2
tftp-server flash:P003-8-12-00
tftp-server flash:P003-8-12-00.loads
tftp-server flash:P003-8-12-00.sb2
tftp-server flash:SIP000F902B40E0.cnf.xml
control-plane
mgcp behavior g729-variants static-pt
dial-peer cor custom
dial-peer voice 2 voip
description Outgoing Geographic
translation-profile outgoing DiscardDigit9
destination-pattern 0[7]........
voice-class codec 1
session protocol sipv2
session target dns:sip.cloudcalling.co.uk
dtmf-relay rtp-nte
no vad
dial-peer voice 1 voip
description IncomingSIP
translation-profile incoming IncomingSIP
voice-class codec 1
session protocol sipv2
session target dns:sip.cloudcalling.co.uk
incoming called-number .T
dtmf-relay sip-notify rtp-nte
no vad
sip-ua
credentials username 4143*002 password 7 password realm sip.cloudcalling.co.uk
authentication username 4143*002 password 7 password
nat symmetric role passive
nat symmetric check-media-src
calling-info sip-to-pstn number set 4143*002
no remote-party-id
retry invite 3
retry register 3
timers connect 100
registrar dns:sip.cloudcalling.co.uk expires 60
sip-server dns:sip.cloudcalling.co.uk
host-registrar
gatekeeper
shutdown
telephony-service
load 7960-7940 P0S3-8-12-00
max-ephones 24
max-dn 30
ip source-address 192.168.1.1 port 2000
max-conferences 8 gain -6
web admin system name Admin secret 5 $1$Fktw$t9GQkdDdHmoYdwptO8.or.
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
line con 0
line aux 0
line vty 0 4
login
scheduler allocate 20000 1000
ntp server 85.119.80.232
end
Router#You my friend are a star! worked straight away, many thanks. Just one more thing, when i make an outgoing call, it always appears as "blocked" on my phone, my sip trunk is set to allow CME to alter outgoing CLI's how would i program the outgoing CLI to 01133501788 also?
The new working config is below with your suggestion, which works!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
logging message-counter syslog
no aaa new-model
clock timezone GMT 0
dot11 syslog
ip source-route
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1
ip dhcp excluded-address 10.10.10.1
ip dhcp pool DATA_POOL
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
dns-server 188.92.232.50 188.92.232.100
ip dhcp pool VOICE_POOL
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 188.92.232.50 188.92.232.100
option 150 ip 192.168.1.1
ip name-server 188.92.232.50
ip name-server 188.92.232.100
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
registrar server
voice class codec 1
codec preference 2 g711ulaw
codec preference 3 g711alaw
voice register global
mode cme
source-address 192.168.1.1 port 5060
max-dn 144
max-pool 42
load 7960-7940 P0S3-8-12-00
authenticate register
tftp-path flash:
create profile sync 0015244443466064
voice register dn 1
number 6999
allow watch
name SIP
label SIP
voice register pool 1
id mac 000F.902B.40E0
type 7960
number 1 dn 1
dtmf-relay sip-notify
username cisco password cisco
codec g711ulaw
voice translation-rule 1
rule 1 /^6...$/ /4143*002/
voice translation-rule 3
rule 1 /^01133501788$/ /6999/
rule 2 /^1133501788$/ /6999/
voice translation-profile IncomingSIP
translate called 3
voice translation-profile Translatetrunk
translate calling 1
voice-card 0
no dspfarm
username matt privilege 15 secret 5 $1$DCD0$SjWqnKgDSGVzzIKRerXh11
archive
log config
hidekeys
interface FastEthernet0/0
ip address 194.12.0.222 255.255.255.252
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface FastEthernet0/1
no ip address
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface FastEthernet0/1.10
description DATA
encapsulation dot1Q 10
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface FastEthernet0/1.20
description VOICE
encapsulation dot1Q 20
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 194.12.0.221
ip http server
ip http authentication local
no ip http secure-server
ip nat inside source list 1 interface FastEthernet0/0 overload
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 1 permit 10.10.10.0 0.0.0.255
tftp-server flash:P003-8-12-00.bin
tftp-server flash:P003-8-12-00.sbn
tftp-server flash:P0S3-8-12-00.loads
tftp-server flash:P0S3-8-12-00.sb2
tftp-server flash:P003-8-12-00
tftp-server flash:P003-8-12-00.loads
tftp-server flash:P003-8-12-00.sb2
tftp-server flash:SIP000F902B40E0.cnf.xml
control-plane
mgcp behavior g729-variants static-pt
dial-peer cor custom
dial-peer voice 1 voip
description IncomingSIP
translation-profile incoming IncomingSIP
voice-class codec 1
session protocol sipv2
session target sip-server
incoming called-number .T
dtmf-relay sip-notify rtp-nte
no vad
dial-peer voice 2 voip
description Outgoing Geographic
translation-profile outgoing Translatetrunk
destination-pattern 0[7]........
voice-class codec 1
session protocol sipv2
session target dns:sip.cloudcalling.co.uk
dtmf-relay rtp-nte
no vad
sip-ua
credentials username 4143*002 password 7 password realm sip.cloudcalling.co.uk
authentication username 4143*002 password 7 password
nat symmetric role passive
nat symmetric check-media-src
calling-info sip-to-pstn number set 4143*002
no remote-party-id
retry invite 3
retry register 3
timers connect 100
registrar dns:sip.cloudcalling.co.uk expires 60
sip-server dns:sip.cloudcalling.co.uk
host-registrar
gatekeeper
shutdown
telephony-service
load 7960-7940 P0S3-8-12-00
max-ephones 24
max-dn 30
ip source-address 192.168.1.1 port 2000
max-conferences 8 gain -6
web admin system name Admin secret 5 $1$Fktw$t9GQkdDdHmoYdwptO8.or.
transfer-system full-consult
create cnf-files version-stamp 7960 Dec 17 2013 14:35:13
line con 0
line aux 0
line vty 0 4
login
scheduler allocate 20000 1000
ntp server 85.119.80.232
end
Router# -
Until recently, my HP 7960 was printing just fine. Then, about half way through the printing process, the pics started turning green. I've cleaned the cartridges, replaced the cartridges using only new original HP ink cartridges, adjusted the print settings, reverted to the default print settings, and the problem persists. My OS is Windows Vista, which I've had for 3 years and never had a printing problem with the 7960. So, I doubt it's the OS. Someone suggested that I may have clogged nozzles but if so, why the color change only during the last half of the printing process?
Any assistance with this problem is greatly appreciated, and thank you in advance.Hi there sarge. Click on the link below to check on your issue. Hope this helps.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01430567&cc=au&lc=en&dlc=en&product=3571753
What I noticed is that you've been printing an alignment page everytime you take out and put those cartridges back in.
When the alignment page was printed were you able to scan it on the scanner glass?
You can check on the link below on "How to Align the Print cartridges"
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01419346&cc=au&lc=en&dlc=en&product=3571753
or
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01065136&cc=au&lc=en&dlc=en&product=3571753
Let me know what happen after then. Thanks -
I have a brand new HP which came with Windows Vista. I have a used printer, an hp photosmart 7960. When I put the installation disc in, a little screen comes up that says "Checking System." The computer asks me if I really want to install it since it doesn't recognize it and it might cause problems. I tell it to install anyway. Howevere, the "Checking System" disc goes nowhere. The 0% stays at 0%. The directions that came with the printer say to disable the virus protector before installing program. I spent all afternoon trying to install--with and without the virus protection disabled. Is the photosmart 7960 not compatible with Vista? Or am I missing something? I am not particfularly computer literate, so if you have suggestions, please be clear and simple.
Gretchen wrote:
I have a brand new HP which came with Windows Vista. I have a used printer, an hp photosmart 7960. When I put the installation disc in, a little screen comes up that says "Checking System." The computer asks me if I really want to install it since it doesn't recognize it and it might cause problems. I tell it to install anyway. Howevere, the "Checking System" disc goes nowhere. The 0% stays at 0%. The directions that came with the printer say to disable the virus protector before installing program. I spent all afternoon trying to install--with and without the virus protection disabled. Is the photosmart 7960 not compatible with Vista? Or am I missing something? I am not particfularly computer literate, so if you have suggestions, please be clear and simple.
Unplug the USB cable from the printer to the computer if you have installed it, then download the driver from HP's website here. Start with the basic driver. After the install is complete download and install the update from the same link.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Sharing Photosmart 7960 from Windows 7 to XP
Hello,
I have a Photosmart 7960 connected to a Windows 7 x86 PC. I would like to share it with an XP computer, but I cannot locate an installable driver on for the Windows 7 computer that can be downloaded to the XP machine at installation time. Can anyone tell me how to share this printer from Windows 7 to XP?
Thanks,
Larrycampus56,
End of extended support for Windows 7 is January 14, 2020. Regarding your second question, all X230 models come with anti-glare screens. Hope this helps.
-Brian
My Thinkpads: T42 (GPU failure), T60, W530
W530: Windows 7 Pro | i7-3720qm | FHD screen | 256gb Samsung 840 Pro SSD | 500GB Ultrabay HDD | 16gb Crucial RAM | Nvidia K1000m -
Driver? Networking Photosmart 7960
Hi,
I have an HP Photosmart 7960 connected to a Netgear wireless print server. I am trying to set up the printer to work from my G4. I had no problems setting up my Laserjet on another port on this print server. But, when I try to find a compatible driver using the Mac printer setup tools, there are none listed for this printer. I tried to install the HP software, but the driver still does not appear in the list. I have searched the forum, and this issue seems to be common. However, I have not found a thread that contains a solution. BTW - the printer installs fine if I direct connect it the G4. Any help is much appreciated.Hmm...
Network printing/Windows printing only works with a driver that was meant for network printing. To use the OS X built-in CUPS network choices, you need a CUPS driver. For postscript printers, it's not an issue, because postscript is the native output of OS X, and can easily be routed to the various choices in Printer Setup.
Non-postscript printers are Very Different. Except for Brother, no manufacturer has provided CUPS drivers. Instead, what you get is Carbonized, OS9 legacy drivers, that have the comm protocol written into the driver (mostly USB). You can only print via the comm type written into the driver.
**Exception - when printing via an Airport/Bonjour enabled print server, where the software does a port redirection, USB output from the Mac gets routed to the USB port on Airport Express/Extreme.
Get the hpijs and ESP ghostscript driver set:
http://www.linuxprinting.org/macosx/hpijs/
(I'm pretty sure I said the same stuff in those links - I know this is hard to swallow, but you needn't listen to me only - further research about OS X and CUPS will help you understand this driver limitation) -
USB Cable problem with HP Photosmart 7960 printer
This may sound like a stupid question but I just bought a new 7960 printer to replace my old 7960 which has two out of the three ink cartridge holders broken and the usb port on the new printer won't accept a usb cable. It appears to be blocked by a cap insert over the connector prongs which will not come out. Any suggestions?
Here is a link with some troubleshooting steps that may help to solve the issue you are having with your printer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02065582&cc=us&dlc=en&lc=en&product=3940574&tmp...
Paper feed problems are a hardware issue, if none of these steps help I would recommend contacting HP for upgrade options. I have included a link with directions for contacting HP:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
I am an HP employee.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
DST issue with 7940/7960 on CUCM 8.6.2
Hi Guys,
In the last 19 October, in any city of Brazil started of date summer time (DST), and the IP Phone models 7940/7960 not changed the time automatically. After restart physical or logical the IP Phone stay the correct time.
7940
Firmware de aplicação P00308010200
Firmware de inicialização PC0303010200
Versão 8.1(2.0)
I read any posts in this forum, but, not is clear for me if this problem is related any bug or no. Any have idea about this?
Thank You,
WilsonHi Wilson,
There are a number of DST bugs that affect CUCM 8.6. I would have a look
at the attached bugs . Did you install any of the DST/TZ Timezone updates for CUCM?
Cisco Unified Communications Manager / Cisco Unity Connection
Timezone Update 2013d
Release Notes Version 1
September 19, 2013
Introduction:
These release notes contain important information about installation procedures for the 8.6(2x) Timezone
Update for Cisco Unified Communications Manager or Cisco Unity Connection.
Note
Before you install this Timezone Update, Cisco recommends that you review the
Important Notes section for information about issues that may affect your system.
Updates in This Release
DST updates are cumulative, so installing this patch will provide all of the fixes in the New Updates section plus all of the
fixes in the Previous Updates section
New Updates
CSCui46884
DST/TZ data update with 2013d
Previous Updates
CSCue96910
DST/TZ data update with 2013b
CSCue06553
DST/TZ data update with 2012j
CSCtz20987
DST: Update CM to Olson TZ version 2012c
CSCtn29406
DST: Update CM to Olson TZ version 2011h
CSCtk55066
DST: Update CM for Olson TZ ver 2010o
CSCtj75860
Inconsistent changeover
for DST spring and fall in US, Canada
CSCtg50448
DST: Update CM for Olson TZ ver 2010i
Known Caveats
CSCuj30440
Renaming DST
cop file in logs
CSCuj26553
69xx phones will not display correct time for Chile/Santiago Timezone
CSCue81856
dst
updater.2012j DST cop file does not match Gaza in timeanddate.com
From
http://www.cisco.com/web/software/282074298/106084/dst-862-2013d-cop-readme.pdf
Cheers!
Rob
"Why do the best things always disappear "
- The Band -
CME 10 cannot attended transfer with BLF button
Good morning!
I'm having an issue with a client's CME in which they can no longer do an attended transfer using BLF speed dial buttons. Yesterday morning, their CME router was rebooted for unrelated reasons. Prior to this reboot, attended transfers could be done using BLF buttons but NOT by dialing the number. After the reboot this has reversed so you can do an attended transfer when you dial but if you hit the BLF button it automatically performs a blind transfer.
The client has stated that if they have to have one or the other they'd like it to go back to the way it was working prior to yesterday morning as the receptionist has everyone in the organization on BLF buttons on a side car and most transfers need to be attended rather than blind. I have tested with other phones and confirmed its organization wide and not just on his phone.
Here is some of the config
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
bind control source-interface GigabitEthernet0/1.1
bind media source-interface GigabitEthernet0/1.1
header-passing
registrar server expires max 1200 min 300
no update-callerid
sh telephony
CONFIG (Version=10.0)
=====================
Version 10.0
Max phoneload sccp version 17
Max dspfarm sccp version 18
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
protocol mode default
ip source-address x.x.x.x port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
service dnis overlay
service dnis dir-lookup
no auto-reg-ephone
load 7916-24 B016-1-0-4-2
load 7975 SCCP75.9-3-1SR4-1S
max-ephones 110
max-dn 220
max-conferences 4 gain -6
dspfarm units 5
dspfarm transcode sessions 0
dspfarm 1 confprof1
dspfarm 2
dspfarm 3
dspfarm 4
dspfarm 5
conference hardware
conference transfer-pattern
privacy
no privacy-on-hold
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 10
voicemail 6000
cnf-file location: flash:
cnf-file option: PER-PHONE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
phone service videoCapability 1
phone service ehookEnable 1
mwi relay
moh flash:/music-on-hold.au
time-format 12
date-format mm-dd-yy
timezone 12 Eastern Standard/Daylight Time
secondary-dialtone 9
call-forward pattern .T
call-forward system redirecting-expanded
transfer-pattern .T
transfer-pattern 7.... blind
transfer-pattern 9.T
night-service code *99
keepalive 30 auxiliary 4
timeout interdigit 5
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
system message
edit DN through Web: enabled.
edit TIME through web: enabled.
background save interval 10 minutes
Log (table parameters):
max-size: 150
retain-timer: 15
create cnf-files version-stamp Jan 01 2002 00:00:00
transfer-system full-consult
transfer-digit-collect orig-call
local directory service: enabled.
Extension-assigner tag-type ephone-tag.Hi there,
Can you try;
Direct station select consult transfer is enabled with the addition of the dss keyword to the transfer-system full-consult command, which defines the call transfer method for all lines served by the router.
transfer-system full-consult dss
Cheers!
Rob -
SLOW printing with HP PhotoSmart 7960
If this has already been addressed in another thread, please someone point me there, but:
Problem is that suddenly my HP PhotoSmart 7960 has started to take 1/2 hour to print a simple single page of text. I'm using OS X 10.3.9, by the way.
Tried updating the drivers from HP - no good. Tried Repair Permissions - no good.
Can someone out there tell me how to completely remove any trace of HP software / drivers from the hard drive? Is there a print queue or memory buffer that needs to be purged? Figured I'd re-install the original drivers if I could completely remove any trace of a printer or print job having previously existed.
Spent more than a few frustrating hours on this - any help is appreciated!1-2 minutes! Try 10-15 minutes on my Photosmart. These things are junk. I have discussed my many issues with phone support 10-12 times in the last six months with no progress.
-
Menu 9 in 7960 doesn't appear...
I'm sorry but in my ip phone 7960 menu 9 doesn't appear...only 1,2,3,4,5,6...why???
Following links may help you
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7960g_7940g/sip/4_4/english/administration/guide/siptrb44.html
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/ip_phones/display_phones/translated/2.0_2.1/english_2.0/its_7960.pdf -
HP Photosmart 7960 Not Shown in Print Drivers
I finally pulled the trigger and bought a MacBook Pro last Monday. I have a lot to learn having come from a PC background. I have an HP Photosmart 7960 printer hard-wired to a desktop PC running Windows XP. I use a wireless network with a Linksys router for a laptop PC also running Windows XP that shares that printer. I am trying to get my new Mac to share that printer wirelessly as well. It can find the printer on my network and then asks me to choose a printer driver from the drop-down list. The HP Photosmart 7900 series is not in the drop-down list even thought that driver is supposed to be part of the Leopard 10.5.8 OS without downloading from HP. As a matter of fact HP doesn't even offer that driver up to download because it already comes on the operating system. I picked one at random (HP Photosmart 7550 Gutenprint 5.1.3) and it will print, but that can't be the right way to go in the long run. I've been back to the Apple Store where I bought the laptop and they don't know what to tell me to do. I'm hoping someone has solved this issue so I can enjoy my new Mac.
Hi! There are 4 7900 series drivers included in Leopard however at installation not all of them may have been chosen. I think you will have to use the install disc to install the additional drivers if they weren't installed originally.
List of drivers HERE. Tom
From Apple:
Installing printer drivers
All included printer drivers are installed by default with Mac OS X 10.5 Leopard. If you custom install, you can select which printer driver packages you would like installed. The Apple LaserWriter PPDs and sample drivers included with CUPS are installed as part of the Essential System Software package and cannot be customized or installed separately from Mac OS X.
If you would like to install any of the optional printer drivers after installing Mac OS X, insert the Install disc into your computer and use Optional Installs. -
Cisco ip phone 7960 cannot connect to call manager express
The 7960 ip phone seems not to connect to the call manager express
router and i have already put the firmware and configured the tftp
server,the rest of the phones the 7911`s are all working ok,i have tried
to reset the phone but it doesnt respond to the # key so as to reset to
factory defaults.
I have tried all the options of resetting it but to no avail.
could someone give me some techie tips on this ? could it be a hardware issue ?? please assist.Go to the phone and check if the TFTP server is correct (should be the CME IP address). Also check the DHCP address.
Resetting 7900 Series IP Phones to Factory Defaults:
http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a00800941bb.shtml
Check the bug:
CSCed93627: Not able to reset 7970 back to factory defaults
Maybe you are looking for
-
hello i have done the new updates and the magic mouse has the touch scroll feature that works on the window side but it's locking up like the mouse is falling asleep. has any one ran into this problem yet ?
-
Class not found Exception for Portal 4.0 console
-
Creative Suite 6 installation stuck on windows 7
Bought creative suite 6 Design and Web Premium and started the installation on windows 7 Went with default installation and selected all (default).. After around 20 min or so it keeps accessing CD drive while installing acrobat X. Looks like it go
-
[KDE] sftp:// and smb:// are turtles
I have had experiments wrt speed between self-made home NAS and my workstation (with NetGear router between them). If I use smbclient to connect samba on NAS or lftp to connect to SSH on NAS, all is OK: the speed is about 12MiB/s, and this is a limit
-
Can I alter pitch bend range via plugin for synths that default to /- 2 semitones?
I am looking for a way to change the pitch bend range to +/- 12 for an AU instrument that does not have the capability to do so within its own settings. Is there some sort of plug-in I can run "after the fact" and assign to that channel to allow for