BLF stopped showing activity status

I have two different locations having this same issue. The BLF key will stop showing the status of the other but, after a reset of the effected device it works.... only to have the problem roll to another phone in that same call pick up group. The BLFs work as speed dials. Only the flashing to show status has stopped. If the user unplugs the phone or if we perform a RESET of the phone, the flashing returns. It continues to roll through the entire group.
What registration is upon the reboot/restart of these devices? How do I isolate this problem?
[CUCM8.6.2.23075-1]

8000 phones means that there is probably more than a CUCM. CUPS, a switchboard, shared lines, Lync or Jabber,... all subscribe to the status. A short network outage or a failover of many phones can cause problems. We observed this many times in the past years. Sometimes lines are busy but no one is using the line, after a reset everything works normal an a few days another line is affected. A phone is ringing and as soon as you lift the receiver the other party is put on hold. ...
A restart of all CTI Manager services solved the problem, otherwise reboot the cluster.

Similar Messages

I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.

I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.

try another cable it's a std cable that most consumer electronic use
if that does not help then I would try to connect it by a microUSB cable to see if I could restore the firmware from a computer running itunes
if that does not help then I would say that the appletv have died

MCU 4501 does not show active conference

Hi All,
I have MCU 4501 and it has stopped showing active conferences on auto attendant while the conference visibility is set to PUBLIC, can any one help what can be the reason

It could be that your auto attendant is set to only show selected conferences under "Accessible scheduled conferences" in the specific auto attendant options under Conferences > Auto Attendants.
Is it only select conferences, or all conferencing that aren't appearing?

Background JOB STATUS remaining active status

Hi experts,
I had a job scheduled on production server which generates bank statements using program RFBKBSST( MASS RUN of bank statements). Job used to run fine all this days but from past 3 days the job is remaining in ACTIVE status whenever it is scheduled as result, no statements are getting generated.
I had checked this in transaction like sm50 its showing status "stopped" and reason as "SLEEP".
         please suggest me to overcome the problem.
thanks & regards,
hemanth

Hi Naveen,
Iam sorry, actually i did not check the same job on test system. I had checked it now this background job( Mass run) which is failing on production system, is also failing on Test system from past 2 months with same kind of error it is showing now in production.
     So, you might be correct that there is some transportation done from TEST system which had effected the Production.
i had asked the basis team for those transports.
   Can you suggest me what can be done to solve this problem and make the job run successfull.
thanks&regards,
Hemanth.

Message bridge connecting to MQ shows active/forwarding messages but fails to deliver

Created a message bridge between active MQ and weblogic.
Status shows active >>forwarding messages
when i put a message in the queue i see the following error in the logs
<Aug 21, 2013 5:13:29 PM PDT> <Warning> <MessagingBridge> <BEA-200026> <Bridge "
Bridge-1" encountered some problems in one of its adapters or underlying systems
. It stopped transferring messages and will try to reconnect to the adapters sho
(The exception caught was javax.resource.ResourceException: Error sending
message.)>
Weblogic10.3

We resolved this issue by using the latest Active MQ jar.Earlier we were using 5.4.3 now when using the latest version this issue got resolved

My 2 monitor stopped showing the image after update

Hi, a few updates ago, I think the second, my 2 monitor stopped showing the image, the system detects it but either have to restart or start the screen saver so that the image is activated, I I tried change the monitor, cables and is the same problem ... what happens alguein miso, know what to do? ... greetings and thanks in advance

This can be caused by a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Finder file info again stopped showing

iMac 7,1; Mac OSX 10.6.8
My user preferences have become modified/corrupted at least twice recently, and I'm wondering what is the cause.
Back on 5 March 2015 I posted that finder had stopped showing file info Finder stopped showing file info, and when I followed the advice given by a responder (to back up, locate Preferences/com.apple.finder.plist, remove to desktop, then restart) the problem was resolved. A couple of days ago, however, some com.apple.stuff was in my trash inside a Recovered Files folder. I emptied trash, thinking that the preferences would regenerate themselves. But yesterday I detected that Finder again was not showing file info, and this time, the fix didn't work. I ended up using Time Machine to restore the entire Preferences folder in my Library to a few days back. Restarted the machine. Then ran repair permissions. Restarted again. For now, Finder does show file info as it ought. But why does this happen? The iMac has been running very slowly also. Disk capacity is 61.84GB available out of 319.73GB, so shouldn't be a memory issue. Help?

Thank you, seventy one, for your reply. Here you go:
Problem description:
Finder stops showing file info; Preferences modified/corrupted. MacOSX 10.6.8, iMac 7,1 Intel Core 2 Duo 2.4 GHz 2GB RAM
EtreCheck version: 2.1.8 (121)
Report generated March 26, 2015 7:15:00 PM GMT+08:00
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (24-inch Mid 2007) (Verified)
    iMac - model: iMac7,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    2 GB RAM
        BANK 0/DIMM0
            1 GB DDR2 SDRAM 667 MHz ok
        BANK 1/DIMM1
            1 GB DDR2 SDRAM 667 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    ATI,RadeonHD2600 - VRAM: 256 MB
        iMac 1920 x 1200
        spdisplays_display_connector
System Software: ℹ️
    Mac OS X 10.6.8 (10K549) - Time since boot: 8:43:40
Disk Information: ℹ️
    Hitachi HDT725032VLA360 disk0 : (298.09 GB)
        - (disk0s1) <not mounted> : 210 MB
        320G (disk0s2) / : 319.73 GB (59.15 GB free)
USB Information: ℹ️
    Western Digital My Passport 0730 931.48 GB
        - (disk1s1) <not mounted> : 210 MB
        Passport_1TB (disk1s2) /Volumes/Passport_1TB : 999.83 GB (54.12 GB free)
    Apple, Inc. Keyboard Hub
        Mitsumi Electric Apple Optical USB Mouse
        Apple, Inc Apple Keyboard
    Apple Inc. Built-in iSight
    EPSON USB2.0 Printer (Hi-speed)
    Motorola, Inc. Apple USB Modem
    Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Kernel Extensions: ℹ️
        /Applications/Kies.app
    [not loaded]    com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) [Click for support]
    [not loaded]    com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) [Click for support]
    [not loaded]    com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) [Click for support]
    [not loaded]    com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) [Click for support]
    [not loaded]    com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) [Click for support]
        /Applications/Toast 8 Titanium/Toast Titanium.app
    [not loaded]    com.roxio.BluRaySupport (1.1.3) [Click for support]
    [not loaded]    com.roxio.TDIXController (1.7) [Click for support]
        /Applications/Transmit.app
    [not loaded]    com.panic.TransmitDisk.transmitdiskfs (3.0.0 - SDK 10.5) [Click for support]
        /System/Library/Extensions
    [loaded]    com.silex.driver.sxuptp (1.5.1) [Click for support]
    [loaded]    com.wdc.driver.USBHP (1.0.11) [Click for support]
        /Volumes/Passport_1TB/Extras/WD +TURBO Installer.app
    [not loaded]    com.wdc.driver.1394HP (1.0.7) [Click for support]
Startup Items: ℹ️
    HW_CreateNetwork: Path: /Library/StartupItems/HW_CreateNetwork
    HWPortDetect_driver: Path: /Library/StartupItems/HWPortDetect_driver
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [not loaded]    org.samba.winbindd.plist [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
    [running]    com.Affinegy.InstaLANa.plist [Click for support]
    [failed]    com.brother.LOGINserver.plist [Click for support] [Click for details]
    [loaded]    com.epson.Epusp.plist [Click for support]
    [running]    com.epson.epw.agent.plist [Click for support]
    [running]    com.pegatech.NoteTakerService.plist [Click for support]
Launch Daemons: ℹ️
    [failed]    com.adobe.fpsaud.plist [Click for support] [Click for details]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.adobe.versioncueCS3.plist [Click for support]
    [unknown]    com.Affinegy.InstaLANd.plist [Click for support]
    [loaded]    com.barebones.authd.plist [Click for support]
    [loaded]    com.barebones.textwrangler.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [running]    com.wdc.WDDMservice.plist [Click for support]
    [running]    com.wdc.WDSmartWareServer.plist [Click for support]
    [running]    com.WesternDigital.WDSmartWareD.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    TinyAlarm    Application (/Applications/TinyAlarm.app)
    TinyCal    Application (/Applications/TinyCal 1.3.3/TinyCal.app)
    Quicksilver    Application (/Applications/Quicksilver.app)
    iCal    Application (/Applications/iCal.app)
    GrowlHelperApp    Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
    Belkin Router Monitor    Application (/Applications/Belkin/Belkin Router Monitor.app)
    Dropbox    Application (/Applications/Dropbox.app)
    CrossOver CD Helper    Application (/Applications/CrossOver.app/Contents/Resources/CrossOver CD Helper.app)
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    fuspredownloader    Application Hidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
    CNQL2410_ButtonManager    Application Hidden (/Library/CFMSupport/CNQL2410_ButtonManager.app)
    WDQuickView    Application (/Library/Application Support/WDSmartWare/WDQuickView.app)
    StatusMenu    Application (/Library/Application Support/WDSmartWare/StatusMenu.app)
Internet Plug-ins: ℹ️
    RealPlayer Plugin: Version: Unknown [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    DivXBrowserPlugin: Version: 1.4 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
    QuickTime Plugin: Version: 7.6.6
    iPhotoPhotocast: Version: 7.0
    SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    GarminGpsControl: Version: 4.0.3.0 Release - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
User internet Plug-ins: ℹ️
    iGetterScriptablePlugin: Version: 2.9.1 [Click for support]
    BrowserPlus_2.6.0: Version: 2.6.0 [Click for support]
Safari Extensions: ℹ️
    iGetter Extension
Audio Plug-ins: ℹ️
    iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
    Adobe Version Cue CS3 [Click for support]
    BrowserPlus [Click for support]
    Déjà Vu [Click for support]
    DivX [Click for support]
    Flash Player [Click for support]
    Growl [Click for support]
    MacFUSE [Click for support]
Time Machine: ℹ️
    Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
        16%    Skype
         1%    WindowServer
         0%    mds
         0%    USB Print and Storage Center
         0%    Google Chrome
Top Processes by Memory: ℹ️
    140 MB    Google Chrome
    94 MB    Google Chrome Helper
    88 MB    Skype
    62 MB    mds
    54 MB    Mail
Virtual Memory Information: ℹ️
    77 MB    Free RAM
    1.25 GB    Active RAM
    597 MB    Inactive RAM
    219 MB    Wired RAM
    1.79 GB    Page-ins
    1.00 GB    Page-outs
Diagnostics Information: ℹ️
    Mar 26, 2015, 07:14:52 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191452_[redacted].crash
    Mar 26, 2015, 07:14:52 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191452_[redacted].crash
    Mar 26, 2015, 07:14:42 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191442_[redacted].crash
    Mar 26, 2015, 07:14:42 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191442_[redacted].crash
    Mar 26, 2015, 07:14:27 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191427_[redacted].crash
    Mar 26, 2015, 07:14:27 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191427_[redacted].crash
    Mar 26, 2015, 07:14:17 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191417_[redacted].crash
    Mar 26, 2015, 07:14:17 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191417_[redacted].crash
    Mar 26, 2015, 07:14:07 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191407_[redacted].crash
    Mar 26, 2015, 07:14:07 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191407_[redacted].crash
    Mar 26, 2015, 07:13:56 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191356_[redacted].crash
    Mar 26, 2015, 07:13:56 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191356_[redacted].crash
    Mar 26, 2015, 07:13:46 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191346_[redacted].crash
    Mar 26, 2015, 07:13:46 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191346_[redacted].crash
    Mar 26, 2015, 07:13:35 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191335_[redacted].crash
    Mar 26, 2015, 07:13:35 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191335_[redacted].crash
    Mar 26, 2015, 07:13:25 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191325_[redacted].crash
    Mar 26, 2015, 07:13:25 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191325_[redacted].crash
    Mar 26, 2015, 07:13:24 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191324_[redacted].crash
    Mar 26, 2015, 07:13:06 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191306_[redacted].crash
    Mar 26, 2015, 07:13:06 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191306_[redacted].crash
    Mar 26, 2015, 07:12:54 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191254_[redacted].crash
    Mar 26, 2015, 07:12:48 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191248_[redacted].crash
    Mar 26, 2015, 07:12:48 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191248_[redacted].crash
    Mar 26, 2015, 07:12:32 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191232_[redacted].crash
    Mar 26, 2015, 07:12:32 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191232_[redacted].crash
    Mar 26, 2015, 07:12:22 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191222_[redacted].crash
    Mar 26, 2015, 07:12:11 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191211_[redacted].crash
    Mar 26, 2015, 07:12:11 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191211_[redacted].crash
    Mar 26, 2015, 07:12:01 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191201_[redacted].crash
    Mar 26, 2015, 07:11:50 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191150_[redacted].crash
    Mar 26, 2015, 07:11:40 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191140_[redacted].crash
    Mar 26, 2015, 07:11:30 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191130_[redacted].crash
    Mar 26, 2015, 07:11:30 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191130_[redacted].crash
    Mar 26, 2015, 11:28:55 AM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-112855_[redacted].crash
    Mar 26, 2015, 11:01:59 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Router Manager_2015-03-26-110159_[redacted].crash
    Mar 26, 2015, 10:28:14 AM    Self test - passed
    Mar 26, 2015, 07:13:24 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191324_[redacted].crash
    Mar 26, 2015, 07:12:54 PM    /Library/Logs/DiagnosticReports/Belkin Router Monitor & Setup_2015-03-26-191254_[redacted].crash
    Mar 26, 2015, 07:12:22 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191222_[redacted].crash
    Mar 26, 2015, 07:12:01 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191201_[redacted].crash
    Mar 26, 2015, 07:11:50 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191150_[redacted].crash
    Mar 26, 2015, 11:28:55 AM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-112855_[redacted].crash
    Mar 26, 2015, 10:16:32 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Router Manager_2015-03-26-101632_[redacted].crash
    Mar 24, 2015, 06:47:59 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Router Manager_2015-03-24-184759_[redacted].crash
    Mar 26, 2015, 07:11:40 PM    /Library/Logs/CrashReporter/Belkin Router Monitor & Setup_2015-03-26-191140_[redacted].crash

Em showing wrong status

Hi,
RDBMS : 10.2
OS : Centos 5
I can successfully start and stop emctl service. emctl start/stop dbconsole is showing no error. But when I hit the em URL , it is showing db and listener status as down. But they are working :(
can you please tell how to correct this behavior ?

database is working perfectly. No error generated.
If on EM page, I may process to startup, it takes all the credentials and on next screen detect oracle database as up and running. When I click return, it takes me to the same screen showing everything status down.

Hide "Last Active" status on profile

I would like to see an option for hiding your last active status on your profile. Even though you can sign in as invisible, your active status always shows when you have been on line. This causes problems amongst friends sometimes, because you would like to jump on tagged to check messages only or pets, and you may not always have time to reply to them. Then you get it in the neck from friends saying they were on line at the same time and you get accused of ignoring them. I feel this is a privacy issue and we all should be able to have this feature. There is actually one profile I have come across that shows no "Last Active" status and was wondering if they have found a way around this or there is something wrong with their profile.

+2

Showing Holding Status in RWB

Hi Friends
I am stuck up in this problem have gone through the blogs but of no use...
Actually I am working on a Idoc to File scenario and sometime before a scenario which was working fine stop working after a small change in the mapping.
I am unable to get the file in my target system even though there is no error in the IR and ID .
In the RWB it is showing me no error but the component Monitoring is showing the status as "HOLDING"
I have removed the messages with status system error and now there are only 2 types of status one is HOLDING and another is SUCCESSFUL.
Any help would be surely rewrded with points.
Thanks and Regards

Hi,
Actually the problem is not in XI side, it is at receiver end.
Possible cause of holding status.
1. If you are sending a text file then check your FCC parameters. As you said it was working fine, but after you made some changes in mapping and form then it is not working.
Check if you have added or removed any field in mapping the FCC will change accordingly.
2. It may happen that Receiving System is not available/up. Plz chk this too.
Regards,
Sarvesh

Runtime audit browser shows the status busy for the cancelled OWB jobs

Hi ,
I canceled long running OWB job.But the runtime audit browser was showing the status as BUSY.
I observed the the oracle session (SID:48) was running and killed the session.
After killing the session,the status in runtime audit browser changed to COMPLETED.
Till that time i was with an impression that "if we cancel a OWB job then it will kill all the sessions/process that initiated".
Could please tell me why this is happening?
Anything wrong with my configuration?
Appreciate early response.
Thanks,
Naidu

Hi Naidu
Yes you are absolutely right. When you press the cancel button in the GUI, the runtime repository does not get the signal that he is been asked to stop and abort. The GUI cancels himself but the background oracle process is still on !!!. The only way to do is to kill the oracle session. Another way I tried to tackle is
go to the directiry OWB/10.1/owb/rtp/sql and run the file @list_request.sql in sqlplus. Note that you have to login as runtime repositiry owner. After you get the audit id, run the file abort_exec_request.sql and supply the audit id that you obtained by running list_requests.sql. Sometimes it does not work also . Hence the best method is to kill the process

Hi, for some reason screenshots have stopped showing on the appstore, ive tried resetting my cache, restarted computer and itunes, but there still missing

hi, for some reason screenshots have stopped showing on the appstore, ive tried resetting my cache, restarted computer and itunes, but there still missing
im using itunes for windows, windows vista 64bit

hi, heres the info u requested
Microsoft Windows Vista x64 x64 Ultimate Edition Service Pack 2 (Build 6002)
Acer Aspire 6920
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 00D6ACD0035A7110
Current user is not an administrator.
The current local date and time is 2011-06-26 19:10:29.
iTunes is not running in safe mode.
WebKit-accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Mobility Radeon HD 3650
**** External Plug-ins Information ****
No external plug-ins installed.
The drive G: WD Virtual CD 1110 Rev 2003 is a USB 1 device.
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {956AE0ED-F775-4157-8184-95CB8B89B99D}
Description:    Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Thu Jan 01 00:00:00 1970
Lease Expires:    Thu Jan 01 00:00:00 1970
DNS Servers:
Adapter Name:    {805B9D00-0148-4062-8C0F-9DF326230B82}
Description:    Intel(R) Wireless WiFi Link 4965AGN
IP Address:    192.168.0.4
Subnet Mask:    255.255.255.0
Default Gateway:    192.168.0.1
DHCP Enabled:    Yes
DHCP Server:    192.168.0.1
Lease Obtained:    Sun Jun 26 14:02:36 2011
Lease Expires:    Mon Jun 27 14:02:36 2011
DNS Servers:    192.168.0.1
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple website was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-06-26 18:57:29.

ISE 3315 show application status ise taking so long

Hi,
I have a brand new ISE 3315 appliance running 1.1.1.268 , whenver I try to issue the command "show application status ise" , it takes so long time before it shows the output ..the same when I try to start or stop the application ..
I would like to know if the NTP reachability can cause this kind of behavior .. I'm still testing the appliance in the lab , and I have no NTP server , but I have created local DNS server on a router.
any ideas !

Hi
The Execute Network Device Command diagnostic tool allows you to run the show command on any network device. The results are exactly what you would see on a console, and can be used to identify problems in the configuration of the device. You can use it when you suspect that the configuration is wrong, you want to validate it.
Please make sure that you have performed these steps:
Step 1 Choose Operations > Troubleshoot > Diagnostic Tools > General Tools > Execute Network Device Command.
Step 2 Enter the information in the appropriate fields.
Step 3 Click Run to execute the command on the specified network device.
Step 4 Click User Input Required, and modify the fields as necessary.
Step 5 Click Submit to run the command on the network device, and view the output.

"Hppostprocessing" stopped... status 13

I can't print to HP laserjets (4050 or 9000). Driver version is 10.4, PPD File version is 5.4.2.012. I always get the message - The process "hppostprocessing" stopped unexpectedly with status 13.
In CUPS all jobs show "aborted."
I am running 10.4.6 today, but the problem occured before the ugrade as well. I have tried printing from several apps (Word, Entourage, Preview) all with the same results. Using a Generic PS driver works fine, but obviously loses features.

Hi RBobB! And Welcome To Discussions!
Glad you found the solution to your problem!
Although not related to your Topic, you may find this Tip: How to post a link (URL) in "Apple Discussions", useful for future posts.
Have Fun & Enjoy Your Stay!
ali b

What shall i do my iphone showing activation failed during startup?

what shall i do my iphone showing activation failed during startup?

Hi funkeyankey,
It sounds like your phone is not activating correctly when you are trying to set it up. I would recommend the troubleshooting from the following article named:
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
Restart the iPhone.
Try to reach the activation server another way, then try to activate.
Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
Try connecting to iTunes if you can't activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
If you're asked to enter a password to proceed with activating the iPhone, Activation Lock might be enabled as part of Find my iPhone.
Thank you for using Apple Support Communities.
All the very best,
Sterling

BLF stopped showing activity status

Similar Messages

Maybe you are looking for