Blind Demodulation, blind analysis of an unknown caracteristics/parameters of the signal

Hello,
is it possible to implement the "blind demodulation" in LabView 8.5 ?
If someone could give me some information about this topic
Thanks in Advance
Seb_MDI
Seb_MDI
France

Why did you started a new thread. Please continue in your original thread. Please wait patiently. Somebody here will surely respond you and solve your problem.
Thanks
Mathan

Similar Messages

Error message when opening Outlook: The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.

In an Exchange 2010 server/Outlook 2013 environment, one of our users is getting an error message every time they start Outlook. The error message says: "The operation failed. The messaging interfaces have returned an unknown error. If the problem
persists, restart Outlook."
The error log message details are as follow:
System
Provider
[ Name]
Microsoft Office 15 Alerts
EventID
300
[ Qualifiers]
0
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T15:54:49.000000000Z
EventRecordID
655
Channel
OAlerts
Computer
Computer-Name.domain.local
Security
EventData
Microsoft Outlook
The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
301670
15.0.4420.1017
xyfc
0x8004011B
The system is as follows:
Size of .pst file: 2.3 GB (Unicode format so there should be plenty of space left)
OS: Windows 7 (64-Bit)
Application: Outlook 2013 (32-Bit)
The user upgraded from Outlook 2010 a few months ago and the error message has only recently started appearing on startup. I thought it was a corrupt mail profile, so I have already tried creating a new mail profile, as well as the repairing tool in Outlook.
I even tested another email account and that worked just fine. So apparently it is something wrong with the specific user's account/profile and not something wrong with the computer - since my email account worked fine on his computer.
Any help would be greatly appreciated.

I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message.
After I clicked okay I could get into Outlook.
Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop. The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
laptop (so I knew it wasn't a corrupt profile). This led me to the conclusion that it was a corrupt item(s) in my mailbox.
To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
narrow down which folder had the corrupt item if the problem recurred. I'm happy to say my issue is now resolved.

Unknown Error when starting the Group Policy Editor

On Windows 8.1 Professional, I opened the "Edit group policy" from the control panel and also tried to start gpedit.msc from an elevated CMD prompt. In both cases I get the following error message:
In English: Failed to open GPO. You may not have appropriate rights. Details: Unknown Error
There it is again - this dreaded "Unknown Error" message - telling me absolutely nothing about the cause of the problem.
In the past I have been able to launch the GPE on that machine without problems. I can absolutely not remember having messed around with the system files or registry settings. So there is no suspicious thing I could have done to break something. I had a
look at all copies of the GPEDIT.MSC in an editor but none of them looked broken in any way.
I startet C:\WINDOWS\SYSTEM32\MMC.EXE C:\WINDOWS\SYSTEM32\GPEDIT.MSC using the debugger of Visual Studio and paused execution after the error dialog had poped up. I got this call stack:
gpedit.dll!ReportError(struct HWND__ *,unsigned long,unsigned int,...)   Unknown
gpedit.dll!CComponentData::Load(struct IStream *)   Unknown
mfc42u.dll!CWinApp::ProcessShellCommand(class CCommandLineInfo &)   Unknown
I had configured the debugger to break on all exceptions but as you see yourself, MMC is an MFC 4.2 app that doesn't use exceptions.
Since I get no access to the symbols of gpedit.dll, can anybody please tell me which conditions - i.e. problems - in Load() are handled by simply returning E_FAIL? What could be wrong with my machine?

Hi,
Consider the corrupted local policy files and system files, please try these steps:
Step 1: clear local GP by running these commands:
RD /S /Q "%WinDir%\System32\GroupPolicyUsers"
RD /S /Q "%WinDir%\System32\GroupPolicy"
gpupdate /force
Step 2: To scan system files by running this command as admin:
SFC /SCANNOW
Andy error, please post back the CBS.log
Then, restart the computer to check the results.
Also, the event log (Open local event viewer) will show something related to this issue, please check event under
Windows log\Application and Applications and services log\Microsoft\Windows\Grouppolicy, post back if you find any error about this issue.
Kate Li
TechNet Community Support

Cannot update my iPad2 to 5.1 An unknown error message cancels the download process. Could you please inform me how to fix this issue? Thanks!

Cannot update my jail broken iPad2 & iPhone 4S to 5.1
An unknown error message cancels the download process. Could you please inform me how to fix this issue? What is also odd is the fact that the update through iTunes is substantially bigger than downloading it directly OTA, although both methods have been unsuccessful so far...
Thanks!

About the only thing you can try is using the Online Internet Recovery system to reinstall Lion on your Mac over the top of the current install. that will reset all system files and should not touch your personal files or the apps you have installed.
Or iof you have a recent Time Machine backup use that to restore your Mac to that point in time.

I am unable to see following SQL Server Analysis Services in central admin services after the SQL 2014 power pivot installations

I am unable to see following SQL Server Analysis Services in central admin services after the SQL 2014 power pivot installations
Ravi

Hi Ravi,
Per my knowledge, there is no Analysis Service in SharePoint.
After running the SQL 2014 setup to install PowerPivot for SharePoint, you need to open the PowerPivot for SharePoint 2013 Configuration tool in Central Admin Server and configure PowerPivot for SharePoint.
After that, you will see new Service Application called "Default PowerPivot Service Application" in Central Administration.
If you have other WFE servers, then you need to install the PowerPivot Add-In on all the other servers in the SharePoint farm.
More references:
http://sridharbabuk.blogspot.jp/2013/02/installing-configuring-analysis-service.html
http://msdn.microsoft.com/en-us/library/jj219067.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

My Iphone 3 gs is restarting, and a screen to connect to Itunes. When I connect, and restoration, in order to process the information appears: "An unknown error occurred in the restoration (-1)". Help me please!

My Iphone 3 gs is restarting, and a screen to connect to Itunes.When I connect, and restoration, in order to process the information appears: "An unknown error occurred in the restoration(-1)". Help me please!

That is a baseband error. Has your phone ever been illegitimately unlocked? If so, that problem happens. If you haven't jailbroken/unlocked, visit your local Genius Bar.

HT201210 Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle o

Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?

DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

Word Web App cannot open this document due to an unknown error. If the problem persists, try opening the file in Microsoft Word.

Word Web App cannot open this document due to an unknown error. If the problem persists, try opening the file in Microsoft Word.
Can anybody pls help me how to resolve this for which got strucked !!!!
Cheers !!
Praveen
Thanks in Advance !!! Cheers !!! Praveen

Hi Satheesh,
Thanks for quick Reply !!!
can u pls have a look that the below are Log Errors am getting .
Pls suggest me how to resolve that the all the services are in the running state only ,
1. Could not find default ServiceProxy or it does not implement
IWacServiceApplicationProxy.
2. Default service proxy not found while trying to get setting
WORDVIEWERSILVERLIGHTONLY.
Rgrds//Praveen
Thanks in Advance !!! Cheers !!! Praveen

How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error

How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error, user has outlook 2007 connected to exchange 2010 server , I tried scan pst, configuring new profile but no luck so far. Please suggest !
Aditya Mediratta

Hi,
Please try the steps mentioned below and check if it helps:
Open Computer > Local Disk C > Program Files > Microsoft Office > Office 12 > Outlook.exe.
Right click on outlook.exe and click on Properties and then click on
Compatibility tab. Uncheck the box ‘run this program in compatibility mode for’ under compatibility mode, click on Apply and OK.
Note: If you are using 64 bit computer then the file location of the file will be
Computer>Local Disk C>Program Files (x86) >Microsoft Office>Office 12>Outlook.exe
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/aa396c9e-0ce5-4de5-99e3-4f0d771b07e0/exchange-2007-messaging-interface-has-returned-an-unknown-error
Best Regards.

In Windows 7, firefox seems to revert to the default icon (unknown as opposed to the firefox symbol) when I delete the desktop shortcut.

In Windows 7, firefox seems to revert to the default icon (unknown as opposed to the firefox symbol) when I delete the desktop shortcut. This is rather aesthetically displeasing. I can not find much help for this online.

You can try to clear the Windows icon cache.
#Open the Task Manager (Shift+Ctrl+ESC)
#In the Process tab, right-click on the Explorer.exe process and select End Process.
#Open the file picker via "File > New Task (Run)" and click the Browse button.
#Type or Paste %USERPROFILE%\AppData\Local in the File name field (AppData is a hidden folder).
#Select the file IconCache.db and use Delete in the right-click context menu to delete the file.
#After the IconCache.db has been deleted, start a new explorer.exe process via "File > New Task" to get the desktop and Taskbar back.
It is possible that the file IconCache.db is a hidden file.
See http://kb.mozillazine.org/Show_hidden_files_and_folders

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

Unknown airplay error - found the cause but what is the solution??

I am having issues with using airplay from iTunes to and apple TV 3
Set up below:
iTunes 10.6.3
Apple TV 3
Macbook Pro with Lion
All software etc is up to date with latest version
This problem only occurs when the macbook is running on battery power (ie not plugged in to mains). I can start to stream music as expected, eventually the macbook will go into power saving mode and turn off the screen etc. The song that is currently playing when this happens will continue to play on the apple TV. However, as soon as the song finishes, it will fail to stream the next one in the playlist. Returning to the computer and trying to reinitiate airplay throws up unknown error -15000. The only way to get it working again is to turn off the wifi and then turn it on again.
I am certain that the problem is linked to the wifi on the macbook going into some form of power saving mode, which it will do even if i am using the computer but not actively using the wifi (as it has just done again as I am typing this message). Clearly whilst in this mode there is reduced functionality and airplay will not work, and the computer is not reactivating the wifi to its fully functioning state once the next song starts
Seems like this problem was flagged a while ago but no solution was forthcoming. This is an old thread on older version of os x / itunes etc but I still have the problem 3 years later!
https://discussions.apple.com/message/9953271#9953271
Any ideas on how to fix this??
thanks in advance

Hi Sarah,
I was wondering what the bar on top is called.
It's called the menubar.
I want to know, because I cannot figure out how in the heck I moved things around.
Simply press and hold the Command(Apple) key while clicking on any item in the menubar and you'll be able to move it or remove it when dragging it to the desktop.
Also, has anyone found a solution to the PB not wanting to wake up after the installation of extra memory problem???
I've never experienced this problem. Did the symptoms also exist prior to installing the extra memory? Have you tried removing the extra memory to see if the symptoms persist? If, after removing the additional memory, all is well then you may have a "dodgy" module.
RD

I dropped my iphone 4 and it did the brick thing now i have it in recovery mode but it keeps saying unknown error cannot recover the iphone what could be wrong?

i dropped my iphone 4 and it did the brick thing now i have it in recovery mode but it keeps saying unknown error cannot recover the iphone what could be wrong?

It's broke?

Blind user on iPhone 5S, voiceover on, can not see the Airplay icon in the Pandora app

Blind user with an iPhone 5S with iOS 7.1 updated, have the Pandora app installed, and playing streaming music from the phone. My problem is that , while the Airplay icon is visible to a sighted person holding my phone, when I attempt to activate the Airplay icon - while using Voiceover - the phone doesn't seem to be able to "see" the Airplay icon, thus won't allow me to activate it. I have tried both methods of finding/accessing the Airplay icon, via the ""pushing up" of the volume bar, as well as trying to go tot he app-switcher and doing a left-to-right swipe x2 to get to the icon without positive result. The above worked just fine in my old iPhone 4S and iOS 6.X. So, what has changed, and what should I be doing differently? Thanks!

Yes, under the Settings menu of my AppleTV, I have gone into AirPlay sub-menu and the AirPlay selection shows "ON", Onscreen Code is set to "OFF" and no Password is set up.
I also have a Tick against the AppleTV listed under Speakers.
Is there anything else I should do to enable AirPlay on the AppleTV or my iPhone?

Is it possible to use scanning capabilities to access control of the iPad? I have a blind student who would like to be able to use the iPad

I am a vision teacher and work on the Assistive Technology Team in a school district. Is it possible to set up the iPad to allow the blind student access to the device using auditory scanning, then selecting their choice by using a switch or tapping the iPad?

Hi eriepa3,
Thanks for using Apple Support Communities. This page includes information about Voiceover, which may help the student do just that:
Apple - Accessibility - iOS - Voiceover
http://www.apple.com/accessibility/ios/voiceover/
For other options for blind users, see this page:
Apple - Accessibility - iOS
http://www.apple.com/accessibility/ios/#vision
Cheers,
- Ari

Blind Demodulation, blind analysis of an unknown caracteristics/parameters of the signal

Similar Messages

Maybe you are looking for