Blink feed no longer working...

Blink feed just quit working. Just says no content. When I go into settings Facebook is no longer offered. I tried just setting to gallery, that doesn't come up either. I've tried resetting everything I can think of and I can't seem to make anything happen. Any help would be appreciated.

You also might want to try a cache partition wipe, or system cache clear - you won't lose any settings or data, but it may help the device to run better. It's a little tricky on the HTC, but here are the steps:
1) Power off phone (be sure to turn off fast reboot in settings first).
2) Boot into recovery by holding volume down key and then holding power key until boot menu appears.
3) Volume down to RECOVERY and tap power key to select.
4) HTC logo appears followed by blank, dim screen. Briefly tap all three simultaneously: power key, volume up and down keys, and release immediately. You may have to do this step a few times to get the timing right. This part is weird - it didn't seem to work, then I saw the SD card error as promised in step 5, as I was pressing the three keys yet again, and then I got a red triangle with an exclamation mark. I kept pressing all three together and finally got the SD card error)
5) Black screen appears and SD card error message scrolls.(From the bottom, hard to see!) After about 5-10 seconds, recovery menu appears (all in very small font). Volume-down to "wipe cache partition" at bottom of list and tap power key. Cache gets cleared.
6)Then select "reboot system now" by tapping power key again (this choice highlighted). Done!
The only thing I have noticed so far that needed resetting was my keyboard. It defaulted back to the HTC Sense keyboard, and I like my Swype!

Similar Messages

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade. But phone call is still working. Tried resetting phone and repairing device. Still not working. Any suggestion?

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

"We had difficulty reading this feed. null" Atom feeds no longer work?

Hi - our Audioboo feeds used to work fine when submitting as a podcast (eg http://audioboo.fm/users/4705/boos.atom). It seems like they stopped working recently - maybe in the past couple of days - and just report "We had difficulty reading this feed. null" when you try to submit them.
I'm beginning to suspect that the use of atom rather than rss is the cause. Can anyone confirm?
-Jonathan

This feed can be subscribed to manually in iTunes (from the 'Advanced' menu) - actually I'm rather surprised it works because it isn't a valid podcast feed (though it is a valid Atom feed).
It has the iTunes 'declaration' and some itunes tags, although the former is contained in a 'feed' tag whereas it should be a 'rss' tag: there is no 'channel' tag enclosing the podcast data, no 'item' tags enclosing each episode, and no 'enclosure' tags within each episode containing the media URL. I'm not surprised you can't submit it as a podcast, and as I say it's a but surprising that the iTunes application recognizes it.
In order to get it accepted in the iTunes Store you need to create a feed in the correct format: this page contains a sample basic feed so you can see how it should look:
http://www.wilmut.org.uk/pc
If the feed contains the valid iTunes format it can also contain atom tags, which iTunes will ignore.

I have ios 5.1.1. When I sync to iTunes, my purchased apps no longer work. They blink but do not open. The only way I have been able to solve this, is as follows: I delete one of the apps and then re-download and install it. Then, all my apps work.

My new iPod touch 64 Gig has a problem after syncing with iTunes. My purchased apps no longer work. I touch them and they seem to try to open but they do not.
The only way I have found to fix this is as follows:
I delete one of the purchased apps. Then I go to the App Store and re-download and install the same app. After that, all my apps work again.
Please help.

Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store

Shuffle no longer working with headset

Today I got prompted to upgrade my iPod software so I did...and the shuffle (2nd gen) no longer works. The flashy lights were green orange green orange. I went to the help website and dutifully restored factory settings with iTunes. Still doesn't work. Played with various permutations of the off switch (including the 5 second wait mentioned on the help site)and repeating the restore pathway and that didn't work either. The shuffle loads music fine and iTunes recognizes it and even plays the music but when I undock it (making sure to disconnect the shuffle properly) and connect headphones and hit play, the green/orange blinkies reappear.
Any ideas?
itune version is 7.3.1.3
ipod version is 1.0.4
I suspect this may be part of the problem. I can't upgrade to the latest version of iTunes because of my OS (win 2000). So I'm hypothesizing that when the shuffle tried to update, it failed due to the old iTunes version and somehow the drivers got screwed up.
Also, I just downloaded the iPod reset utility and tried that to no avail.
Any ideas? or should I just go to a store?

It's not a hardware issue. I have the exact same circumstance. After being prompted and then updating the software on my shuffle, it quit working. All I get is the green-orange flashing light. iTunes recognizes it's connected, restore works, and syncing works, but the shuffle does not work.

Airport Express b/g no longer working after update to Airport Utility 5.3.1

after updating to this the other day, my AE b/g no longer works - like many others on the forum, i get the flashing amber / yellow blinkie light situation. i can hard reset it and get it to initially show up in AU 5.3.1, but once i try to join it to my wireless network (i use it with my laser printer) it never takes, disappears from AU, and sits there flashing relentlessly.
seems pretty clear that it's related to the 5.3.1 update - it was working fine for nearly 2 years without any issues prior to this. i find it hard to believe it had a total failure related to this - in fact, i just finally updated yesterday after being asked to for 2 weeks, and that's when it stopped working, no question about it.
any ideas on getting it to work? i've tried everything on these forums to no avail. or am i stuck waiting on AU 5.3.2?

I just solved the same issue. First I reset my whole network from scratch by hard resetting all devices (1 AEBS N and two AXg). Then I started configuring my main base station and added the other devices to the network one by one. (I have a WDS). Only after setting all the devices to channel 6, did the green light stay on.
Apparently when you configure a AX to participate in an existing WDS network and you enter the existing network name in the configuration panel of Airport Utility, it creates a separate network with the same name. In order to force it to join the existing network, make sure their Airport ID numbers are entered under the WDS tab in Airport as WDS remotes.
Check this thread for the details: http://discussions.apple.com/thread.jspa?threadID=1440997

Apple Remote no longer working?!?

I'm hoping someone can help me. All of the sudden my Apple Remote is no longer working with my Macbook. I checked to make sure the infrared sensor was not disabled and even changed the battery just in case. I know the remote is working because I can see the light blinking on the remote when I look at it through photo booth, but I still can't get it to work with my computer. I can't even get it to pair with it. I am running iTunes 8 and OS 10.5.5. Any suggestions or ideas as to how to fix this?? Thanks!

If you know someone else with an Apple remote, you might try theirs on your MacBook. Since the option to disable the IR receiver appears in the Security System Preferences we can assume that Mac OS X sees the receiver and the hardware is functioning. (If the IR receiver hardware or software had failed, it would not appear in the Security System Preferences.) So, that would seem to indicate a problem with the Apple remote. But, we can't really say that for certain unless you can prove a different remote does work. If you do go to the Apple store and can show them that the remote is not working, as long as you're still under warranty, they can probably just hand you a new remote. Or you could buy a new one if you're not still under warranty or AppleCare.
-Doug

Mini DisplayPort no longer working after update

Mid-2010 MacBook Pro here.
Ever since I updated to Yosemite, my Mini DisplayPort is no longer working. With Mavericks it was working just fine. I have restarted and done everything I know how to do (PRAM, SMC, etc) - does anyone have any ideas? The internal LCD will blink upon plugging my cable into my port, but that's it. I'd really like to have my monitor with my laptop in clamshell mode again.
Thank you!

ardenus wrote:
I recently updated flash player, only to find it will no longer work.
Have tried uninstalling restarting,repairing disk permissions and re-installing to no avail
any ideas?
24" imac aluminium 2.8GHz, Mac OS X (10.6.1), 4GB memory, 300GB HD
Not sure what OS you are running, posting in the LIon forum I assume Lion?
Try updating Java and Flash:
http://support.apple.com/kb/DL1421
http://get.adobe.com/flashplayer/

"Touch" buttons no longer work on Satellite A500-14L

Hi,
I am owner of Satellite A500-14L (PSAM3E).
I noticed today that the buttons for switching to ECO mode, or turning keyboard's lights on and off are no longer working, however, witching those settings via Toshiba assist utilities works perfectly.
I did *not* reconfigure the buttons usage. I was wondering if there was an easy way to "restore" their default functionnalities...
Thanks by advance !!
(Already tried shutdown / restart / delog-relog things)

Unfortunately, reinstalling toshiba VAP did not solve the problem.
Here's another strange thing:
-I tried to assign different programs to both the eco and the 'lights' buttons with toshiba button setting program
-when I then touch a button, it "reacts", which means it beeps, or even blinks for the "light" button, but nothing happens. I mean really nothing, whichever program or file I assign to the button...
This make me think that the buttons themselves are not faulty, since they beep and blink. What seems to be faulty is the "pipe" that lies behind that step.
Thanks for any other help you may give ! And thanks for your answers that were usefull anyway...

Boot Camp no longer works (XP)

Bootcamp with XP installed no longer works on my 2007 Mac Book Pro (10.4.11)
Windows crashed while I was using a 3d modeling program and I attempted a restart but after I select the Windows partition, it hangs on a black screen with a blinking cursor. Most of the solutions on the forum pertain to this issue during the Windows installation process but I have never had this issue before. Any ideas?
Thanks for your help.

Presuming that you are using the 2007 Mac Book Pro (10.4.11) associated with your post.
Here’s what you need to install and set up Windows on your Mac:
AnIntel-basedMaccomputer,with:
a USB keyboard and mouse, or a built-in keyboard and trackpad
MacOSXversion10.5orlater (the latest version of MacOSX is strongly recommended)
Here is some info:
http://manuals.info.apple.com/enUS/Boot_CampInstall-Setup.pdf
http://manuals.info.apple.com/enUS/Boot_Camp_Install-Setup10.6.pdf

Facebook App No Longer Works - Nokia N97

Hey,
Ever since they updated the facebook on the internet on a pc through a browser.
It no longer works on my phone, no matter what i do i simply get the message "Error Retrieving News Feed: is not valid in table stream"
Does anyone know what this means or what the problem is or how i fix it?
or if there is a new version released that i can download from Ovi Store?
I'm running Version 1.0.5401
Many thanks if anyone can help.....

Face book app and Nokia communities beta both started working again late this afternnon
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Old podcast rss feed no longer exists, do I need to creat a new podcast show for new rss feed?

Hi,
I have an established podcast (Tommy Unit Live) but the RSS feed is no longer valid. Do I need to request a new show (set up a new show) to update with the currect RSS feed?
Thanks for any help anyone can provide.
Tom Meehan

Do you mean that the old feed no longer exists and you don't have access to the server to replace it? In that case your best hope is to email Support at podcasts 'at' apple.com and ask them to transfer the iTunes Store's attention to the new feed: give them the ID number or the URL of the Store page, and the URL of the new feed - check this beforehand by subscribing manually in iTunes (from the 'Advanced' menu) so that you are sure you are dealing with a working feed.
They've just done this for someone else so hopefully they will do it for you: the alternative is to start again from scratch and submit the new feed as a completely new podcast (you would need to change the title slightly or you will be told it has already been submitted).

PCS no longer working with contacts and 6086

I have applied the latest release of PC Suite 6.84.10.3.
Previously the installed level was 6.83.14.1
The send/read/write message still doesn't work but hangs the Windows Explorer for a while (this hang didn't occur previously)
But now, the contact facility no longer works. It is no longer possible to edit a contact, to store it locally or to send it to the phone even a message says everything is OK
(translate it from french: The contact has been well recorded into the phone)
Folder browsing still works correctly, either the phone folder or the memory card folder
Need a fix or a way to install the previous version, at least for the contacts...
This is a really negative feedback!
Phil

I guess what I learned is that sometimes the best solution is to do nothing and wait for the problem to solve itself! Funny, this has never worked for me before.
WOT is now working for me but often for only the first few rows of images. That's cool that it is also working with bing images.
Boudica, thanks for understanding. I am new contributor/ question-asker here on mozilla and may not understand how things are done. I was just frustrated, getting an email saying that my question was answered, logging in to find that it wasn't.
Now we have the functionality that we wanted, right?

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Link to A folder View in a PDF Portfolio - feature no longer working - please advise

Hi, I am no longer able to link to a Folder View of a PDF Portfolio:
Within a PDF portfolio i need to link from a PDF to a folder view in the Portfolio. I am using Link Action - Go to Page View.
This used to work for me - very important feature that no longer works. Please advise a workaround.
Steps:
1. Start a PDF Portfolio that contains files and folders
2. Open a PDF in the Portfolio
3. in the opened PDF click Add or Edit Link
4. Define a link area and set it to Go To A Page Vies
5. In the past i have been able to target a Folder View in the Portfolio - ie. direct a user not to a file, but instead to a folder view that contains relevant files. I would do this by setting the Target Page View to my desired folder view
6. This used to work in bringing a user to the folder view i specify. Now it does nothing. If i go back to the PDF and EDIT the Link i see this. File: Parent Document Page 1. This in fact does nothing.
Please advise, am i doing this wrong, it used to work. I have tried several workarounds, with no luck.
thanks!
Alejandro Collados-Nunez
Graphic Designer | Art Director
| e: [email protected]
| w: www.1lb.ca

There's an extension or two, or a combination of extensions which seem to be causing that in Firefox 6.0.2. One that has been mentioned is TabMix Plus.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
You need to figure out what is causing it, and disable that extension/s until they are fixed by their developer.

Blink feed no longer working...

Similar Messages

Maybe you are looking for