Blinking Blue Light

I know that a blinking Green light tells me that an e-mail is coming in among other things. Now, since updating the OS to 4.0.3, I am getting a blinking Blue light in addition to the Green light (not at the same time.) I have no idea what this blinking blue light means.
Solved!
Go to Solution.

Hello Everyone,
As promised we stated once we had tested this further we would give you more. here is the information directly from our Engineering team.
From the factory, the tablet only supports green notification. However, the LED light inside the tablet is a multi-colored LED,
With the release of Android 4.0.3 many 3rd party applications can take advantage of the multicolored LED inside of our tablet.
None of the Sony Applications use any other Color but green at this time
As the previous poster has stated Facebook is one of the applications that use blue.
This application has a setting to use phone LED notification. If you wish to disable blue for this setting uncheck the phone LED notification within the Facebook app settings.
Here are instructions on how to do so if you wish:
1. Launch Facebook App
2. Tap Option or Menu
3. Tap Settings
4. Tap on Phone LED

Similar Messages

  • Have a compaq cq61 319wm, blinking blue lights

    i have a compaq cq61-319wm. when i press the power botton there is no boot or post. just blinking blue lights at the caps lock and the number lock. i have switched the ram around and even used other ram. any is appreciated.

    I think you have to begin to think of this in terms of a hardware issue. If it reads CDs but not DVDs, then it is not a driver thing but a bad laser. There is a separate laser for CD and DVD functions and one can easily go bad, requiring replacement of the drive.

  • PS4 ERROR CODE ( CE-34305-5) BLINKING BLUE LIGHT

    Hey man, thx a lot for this! I was tryin to turn on this ps4 for 1 hour and the same ***** safe modę again and again. This 'trick' with PS button works!

    This error code I now understand is due to the ***** hard disks in these systems failing, my console is rendered useless by this bluntly down to the fact that the Operating system cant launch as it is stored on the HDD,my console is now useless, I cant get through to SONY CUSTOMER SUPPORT, it is rubbish when compared to other countries that have online chat support, I cant backup anything on the disk as it is corrupt so I am spitting my dummy out of the pram and not investing anymore of my hard earned cash into consoles I was massively let down by microsofts XBOX 360 ended up going through 4 of them, and now this lump of shite loaded with cheap partS, I will get a new replacment off PONY eventually and sell it and make a loss because I paid over £400 for my bundle last november to which it has now dropped in price.im going to invest it into a custom built gaming pc that I Have control over what parts go into it.RANT OVER enjoy your day people. in a nutshell if you get this error CE-34305-5  your cheap nasty hard drive that PONY installed has kicked it.

  • Blue light blinking hp vs196

    Sir ,
    Monitor blue light blinking in the Power Key (blue light blinking hp vs196 ) , I had tried different Cables and different outlet but still the same problem .
    Best Regards

    Hello IT-Specialist,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are getting a flashing blue light on your monitor. The issue you are describing appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
    US support link to contact options for HP products purchased in the US.
    Outside of US support link to contact options for HP products purchased outside the US.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • I have a Samsung Network Extender, model SCS-2U01, and for the past two weeks, the SYS light has gone from solid blue to a blinking red light, disconnecting me from my business calls. In reading the forums, it was mentioned that Verizon had to reset somet

    I have a Samsung Network Extender, model SCS-2U01, and for the past two weeks, the SYS light has gone from solid blue to a blinking red light, disconnecting me from my business calls. In reading the forums, it was mentioned that Verizon had to reset something on their end to fix the issue. Would you be able to confirm if something needs to be reset to fix the issue? Thank you!

    First, try the normal stuff: power cycle your modem, router, and NE allowing time for each component to stabilize before turning on the next in sequence modem > router > NE. If necessary, try resetting your modem and router. If it still doesn’t work verify it is listed in MyVerizon and then calling Verizon Wireless Customer Service at (800) 922-0204. Good luck!

  • PS4 Blinking white,and Blue light Causes, Fixes, and occurrences I need help

    I have a question about the three blinking lights what causes the blue light and if it happens once will it be more likely to happen again and with the white light if it happens once will it happen again more frequently and what are the fixes and causes I know some of the causes for the white light like if many downloads are happening in the back ground don't turn of the PS4 that is something that causes it so what should I do and what are the causes and if it happens once will it be more likely to happen again

    You've lost me, take a deep breath and start again.

  • Toshiba Canvio 1.5TB Portable Hard Drive Blue Light just keeps blinking

    I have a Toshiba Canvio HDTC615XK3B1 1.5TB Portable Hard Drive and its been working fine so far. This morning I tried to access some files and when I plugged it in, the harddrive made the usual virbation but the blue light goes from solid to rapidly blinking. My computer (macbook) doesnt recognize it either. Ive tried it on multiple computers too. Please help!!! 

    Unfortunately, the drive might might be failing unfortunately, especially considering it's not working on multiple computers. You could try to reformat it, but that would cause you to lose your data. Alternatively, you could make a warranty claim.
    - Peter

  • HP Mediasmart Server EX490 stopped booting; health light blinks blue forever

    My server recently stopped responding on the network.  I power-cycled it to reboot, but it never came back up.  The network conection light goes solid blue (and the server shows up in the router's list of clients), but the health indicator continues to blink blue indefinitely (as long as 36 hours at one point) and I can't view any files or remote desktop in.
    This has continued through a variety of reboots.  I attempted to use System Recovery to restore the system, but was never able to get the server to enter recovery mode (health indicator turning violet).  I tried using recovery anyway just in case (both with a direct ethernet connection and over the network), but it always failed on step 3.
    I wondered if the boot disk had died, but I removed it and hooked it up to another computer and was able to successfully view files, so it's at least not totally dead.
    I'd appreciate any further suggestions on things I could try to get it back up and running.

    I have the same problem ..... Will not boot up, two 1t drives, I removed the drives tested to see if data was on.. yes... has dat.   System will not boot to get it. I can not reinstall software either. HELP !

  • HDD blinking red light

    I have a pavilion dv4-1220us. I have noticed that from time to time the HHD starts spinning and the white/blue light turns amber and starts blinking slowing down the computer to the point that the only option left is to reboot. I cannot connect any action that might cause this to happen. Any ideas how to solve it?

    >SOLVED: allready tried several cables, also with double usb (Y-cable).
    >solution was a cable with a interferencefilter close to the HDD.
    Thanks for feedback!

  • WRTU54G-TM try this to fix blue light problems, dropping service and disconnects

    I spent a ton of time on the phone with T-Mobile, Linksys and the internet company to solve the problem of the router kicking off frequently.
     The last suggestions, which has worked so far is to log into your router.  Change the MTU from automatic to manual and then type in 1450.  Save and it will reboot.  Wait until your back online and you should have NO problems.  Linksys says this is the workaround until tmobile releases the ok on new firmware.
    if its blinking blue either call tmobile and have them deactivate the voicemail on that line or you need to set it up.
    Good luck.

    Hi,
    I just started the t-Mobile @ Home service with the WRTU54G-TM router this weekend and had all sorts of issues with the router rebooting and dropping the blue-light.
    I have AT&T DSL with a 5100 Speedstream modem.  Before getting the Linksys router, I had a 5 year old Netgear wireless router that had a rock solid internet connection - only dropped it 3 times over a 5 year period.
    After having a full day off issues with the t-Mobile Linksys router, I decided to try reconfiguring my network so I had the Netgear router in between the Linksys and the modem.
    I downloaded the latest set-up wizard from Linksys and ran it (and followed the instructions to the "t"), and chose the option to keep my existing network (with the netgear router) and add the t-Mobile Linksys router to the existing network.  Since the Linksys has better wireless and security features than the old Netgear router, I still have all my wireless traffic going through the Linksys (I turned off the wireless features of the Netgear router).  All the Netgear router is doing is keeping the internet connection alive.
    So far (it's only been one day), I've seen a dramatic improvement - haven't lost the blue light once and everything seems to be running fine.  If you had an existing router that worked will prior to adding the T-mobile one, I would encourage you to try this set-up, since it has worked very well for me.

  • Blinking blue screen after update

    Hi, was having updating troubles (would not download), but tonight it finally did. However after it applied the update, I get a blinking blue screen, going from blue to a lighter blue then back again. The system seems to start normally, however once it loads my desktop and the menu bar it goes to the blue screen. I can start it fine in safe mode, and have zapped the pram, disabled all login items etc, no dice.
    The computer is an iMac 21 inch
    Thanks in advance for any help.

    You have a mucked up update. restore the bootable backup/clone or Time Machine backup of your previous installation, and try again. If you don't have one, boot with your restore disc and reinstall the OS. Then, get a bootable, external HD (preferably FireWire, since it's 40-50% faster than USB 2 and designed for data transfers), make a bootable backup/clone before updating/upgrading, and ensure that it's bootable and works like the original. That allows you to revert to the previous good state without having to reinstall or reset anything. See these for details:
    http://docs.info.apple.com/article.html?artnum=106941
    http://www.macmaps.com/upgradefaq.html
    http://www.macmaps.com/backup.html
    http://www.thexlab.com/faqs/installswupdates.html
    http://www.thexlab.com/faqs/backuprecovery.html
    If you only have a Time Machine backup, ensure that you can reliably restore it to another disk/volume/partition before updating/upgrading.

  • Background contrast on Apps screen & blinking green light

    Newbie here.  The Apps screen had a blue background but is now white and I am unable to read the titles of the icons at the bottom of the screen.  How can I get rid of the white background and return to the blue contrast?
    Additionally the green indicator light is blinking non-stop.  Why is it doing that now when it never did before?
    Thanks!  

    Greetings, and welcome to the forums!
    Not sure about an answer to your 1st question, but the blinking green light simply means that your phone is connected to your carrier. I use it just so I know at a glance whether my phone's actually on or not. To disable that blinker, go to Options > Screen/Keyboard > LED Coverage Indicator and change the setting to "off".
    "Cats may taste like chicken, but they have more bones than rabbits."
    Blackberry 101
    Tips & Tricks
    Videos to learn from on youtube

  • 6300 blue lights/headphone adapter

    Blue light which used to flash on my 6300 mobile has turned off. Can u please tell me how to turn it on?
    Also pls tell me whether the convertor 2.5 mm to 3.5 mm is available or not?I want to use my headphones instead of earphones provided.

    18-Sep-200705:31 PM
    jonmyates wrote:
    Hello everyone,
    Does anyone know if the blue lights on the side of the 6300 that blink when you have a missed call etc, can be speeded up so that they blink quicker?
    Possibly through some software etc?
    Thanks,
    Jon
    Sorry, you cannot change the way they work.
    Experience and persistence are second to none just ask user one.
    1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
    Love me or hate me, its still an obsession. Love me or hate me, that is the question...

  • How To On Front Blue Light of Nokia 5700

    Hi guys
    Can anyone Tell ME How To Open Front Blue Light In Nokia 5700 Not getting My point so have a look of this picture
    [IMG]http://i162.photobucket.com/albums/t260/noman_87/n​okia_5700_zoom1.jpg[/IMG]
    The thing which is circled is a light I want to open
    I have read the full manula of nokia 5700 comes with sales package buy there was no information about this light.
    I have also seen this ligh in MY friens N80 and it was blinking so i inquired from him that fromwhere he opned the light he told me that he had on the sleep mode[In display settings] and then light starts blinking. but when i searched my 5700 i haven't found any sleep mode.
    Have a look of N80 light
    [IMG]http://i162.photobucket.com/albums/t260/noman_87/b​127499.jpg[/IMG]
    So plz tell me that how i can On this light
    Wiating for ur replies
    Nokia 5530 Xpress Music RM-504
    v30.0.009
    31-5-10

    Basically it's not a blue light, it's a light sensor to control the brightness of the screen and keypad in different conditions.
    If it blinks in blue then sleep mode is on, check the manual for sleep mode, or it could be something else.
    Nokia N95
    V 20.0.015
    0546553

  • Blu light diodes blin constanstly

    HP Pavilion dv6-1250eo Entertainment
    Cannot start - black screen. 2 blu light diodes blink constantly
    What can I do

    trip49 wrote:
    ... Cannot start - black screen. 2 blu light diodes blink constantly
    Hi,
    Do you know which lights ?  Are they capslock and nunlock ? If Yes, please try a hard reset and see if it works.
    1. Power off your laptop
    2. Remove the a/c adapter, battery and everything that is attached to your laptop.
    3. Hold the 'POWER 'button down on your laptop for about 10 seconds.
    4. Plug in the a/c power supply (without battery) and power on.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Service Desk Determination. In the support message Sold to party &

    Dear Friends, Sold to Party , IBASE & Component are not fetching the support message created from Satellite system BI. I have configured the Service Desk for satellite system ECC 6.0. Now I have configured it to BI, but Sold to party & IBASE & Compon

  • Ipod touch not being recognized

    Hi, I am plugging in my son's ipod touch and it is not being recognized by the computer or itunes - only being asked about it being a camera - help - thanks - Debbie

  • Iphone As a Media player

    Im oplaning to get an iphone but just use it as a media player for music and videos cuz i dont wanna sign up for a new plan rightnow. I was wondering can i still get a iphone and use it as as a ipod and surf web eventhou the phone itself is not activ

  • Processing a PHP variable in AS3

    I have looked in every book that I have on AS3 and cannot come up with a solution to this, I hope that someone can help me. I am receiveing a data string from a PHP --- mySQL connection on my web server. The string is arriving in flash as I can trace

  • How do I get Bridge and Lightroom to respect - read - metadata changes?

    I cull my wedding images in Bridge (CS 6) and then export them into LR 4.  I typically rate images as I'm culling, but when I import those images into LR, the ratings don't carry over.  Likewise, when I label images in LR and export them, Bridge show