Blinking folder with a question mark at startup.

Dear all.
I am a newby with Macs and I just found an iMac G3 266Mhz. (Why anybody would throw a Mac away is beyond me but anyhow)
When starting up I just get a blinking folder with the question mark.
I can start up with an CD of Mac OS 9.2 but when wanting to install the software I get an error message about my firmware not being up to date etc etc... when going through the things I have to do for an firmware upgrade I get an error message saying disk locked....By browsing through these pages I found that that was most likely due to starting up from the CD.
But now I'm not able to start up from any other folder then the CD.
If I select to start up from the hard disk I just get the folder icon with the question mark again.
Please please please can anyone help me....or I am doomed to using PC´s forever.
Irol

Hi Irol
You're in a sort of catch 22 situation. You have to run the firmware upgrade while running from the HD.
Anyway. Try this
Start up from the CD as you did before then copy the firmware update app onto your hard drive .
While running from the CD open the HD and look for the "System Folder"
What does it look like? Is it a plain folder or is it a folder with the picasso face?
It should have the picasso face.
If it's a plain folder do this.
Open it and locate a file called "System" - it will have the picasso face. Drag the file out of the system folder onto your desktop.
Now close the system folder.
Now with one swift action - drag the picasso file and drop it onto the closed system folder - do it quickly so that the folder doesn't open. Then wait a moment.
The picasso face should appear on the systgem folder. Now try starting the mac normally.
Does it work?
If so, run the firmware updater. There are two versions, one for a tray loader and one for the slot loader. It you get the wrong one it will tell you, It will also tell you if the firmware is up to date.
Anyway, if you can't start the mac other than from the CD it is most likely that there is some corruption on the disk. A good tool to use is Diskwarrior - it's a bit expensive but it's a staple of my toolkit - it's far more efficient than both Norton and Techtool.
Another alternative - but probably more difficult. is to run from an 8.6 or 9.0 CD if you can find one - ebay?
Just to say - the flashing question mark is the system's way of saying "I cannot find a valid start-up folder"
Hopefully one of the above will get you going.
The fact that you can start the mac up from the CD says that the mac itself is OK - I wonder if it was thrown away because the owner couldn't sort it out.

Similar Messages

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

Read this article...
http://support.apple.com/kb/TS1440?viewlocale=en_US&locale=en_US

Blinking folder with a question mark

I just bought a 2008 MacBook and all as sudden it starts showing a blinking folder with a question mark in it. Anyway to fix this?

The question mark on a blinking folder is to tell you there is no Operating System on the computer. Since this is a 2008 MB it can run Snow Leopard (operating system 10.6). You can buy a copy here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
If the MB can be upgraded further you can buy more recent OS from the App Store.

My Intel iMac only shows a blinking folder with a question mark when powering it up. What can I do besides running the hardware test of the original installer disc.

My Intel iMac only shows a blinking folder with a question mark when powered up.
I did run the hardware test of the original installer disc and no trouble was found and I am out of options. Does anybody have any advice what to do next

If the drive shows errors then repair, if after the 3rd pass of Repair Disk in Disk Utility it still shows errors it's telling you it's time to be replaced. Take it to your local Apple Store or AASP for repair, when it comes back use your backup (either Time Machine or bootable clone) to restore so you can pick up where you left off.

HELP I'm getting a blinking folder with a question mark at start up? Have been trying to fix this for 3 hours and I dont want to lose all my files by resetting it completely!!

I currently have Mavericks but my original OS X disk that I have I'm pretty sure is Mac OS X 10.6.6. I'm not great with computers but am usually able to fix problems I have had with mine in the past. I have reinstalled and reset my computer to factory settings before, but I am locked out of my computer completely & can't get to my files to save them & I really dont want to lose them. I was in Safari earlier opening a file, the page started to not respond & froze up my whole desktop so I did a hard shutdown & restarted my computer. I haven't been able to get back into my account ever since. If my only choice is to lose my files & reinstall everything, I need detailed instructions because I actually attempted to do this at first, out of desperation to fix my computer & the installer was asking me to select what disk I wanted to reinstall lion to yet I dont have a disk for that nor do I know what it exactly is asking of me? Please help

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Folder with a question mark at startup.

I get this question mark along with a folder when starting up. I tried holding down the option key when turning on the power and then I get an internet recovery along with a globe. I click on the arrow below it and it takes maybe 15 minutes to start up. Then i get this disk utilities screen. I'm now unable to do anything. When going into disk utility, disk 0 shows with Mac OS X base system underneath it. All the clickable buttons are faded out. Is there something wrong with the hardrive? and where could i get this fixed? There isn't a warranty on it.

Yes, there's something wrong with the hard drive.
A flashing question mark or globe appears when you start your Mac

Why do I get a blinking folder with a question mark after remote locking my Macbook?

Hi,
I wanted to try the remote lock feature of iCloud.
I remotely locked my 17 inch Mid 2009 MacBook Pro. I received the confirmation email stating that the machine had indeed been locked.
When I went to the machine to unlock it, I was surprised to see a grey screen with a blinking folder. I had expected to see a place for me to enter my PIN. Rebooting the machine revealed the folder again.
What is going on? Did sometihng go wrong resulting in my somehow wiping my hard drive?
Thanks in advance for any help on this.

Here is the email:
Doulos has been locked.
Doulos was locked at 4:40 PM on March 11, 2012 with the following message.
“Remote Locked!”
If you retrieve your Mac, unlock it using the passcode you created to lock your Mac.
iCloud Support | Terms of Service | Privacy Policy

Folder with Flashing Question Mark on Startup

I tried pressing the option key and no startup manager appeared. I unplugged everything, which was not successful. I booted using the snow leopard DVD, went to the Startup Disk option and my hard drive is not an option (only the snow leopard DVD and a network startup (which has a question mark over it). Any thoughts? Thanks

Sounds like the hard drive has died. Does Disk Utility show the drive at all in the left-hand column, or is it completely missing from that list? If missing, your drive is completely dead. Hopefully, you have your data backed up, since in this case the only option for recovering data will be to send the drive to an expensive data recovery service, where they will tear it apart and read whatever they can (which may or may not be much or even anything).
You'll need to contact Apple for service if you're not comfortable opening up the machine and replacing the hard drive yourself.

My MacBook Pro turns on and only shows a folder with a question mark and blinks. The computer will not continue start-up. Suggestions/Advice?

I'm not sure how this screen is appearing, but I tried powering up my computer this morning and it immediately presents a grey screen, then displays a blinking folder with a question mark in the middle of it.
I am looking for troubleshooting advice and procedures to bypass this screen and allow my computer to complete it's start-up.
Thanks-
Gary D. Aston, Jr.
[email protected]

The folder with a question marks is usually an idication that the Mac can't find the system file to boot from.
Since you never told us which system your Mac was running there is nothing more to say.
Allan

When I boot up my I get a grey screen with a flashing folder with a question mark

I was trying to set up a bootable Linux flash drive for another computer using UNetbootin and I accidentally selected an empty partition on my hard drive instead of the USB I was trying to use. It went through the install process, and I didn't realize it was on my computer rather than the USB. The computer worked fine, so I thought nothing of it.
Today, I go to mess with my computer and it is frozen at the login screen. I restart it, and now I just get a blinking folder with a question mark. I try to go into recovery, but it isn't there. Internet Recovery works fine, but when I go to use Disk Utility or to reinstall the OS it cannot find the internal Hard Disk.
What am I supposed to do here? I don't want to lose all my data.

greenbil1
You can contact AppleCare to buy a replacement set of the oringinal Install discs for a nominal cost. You will need the serial number and a credit card to place the order.

TS1812 Hi Everyone, I have tried all the solutions mentioned by apple and still have a white screen with a blinking file folder with a question mark in the center, anyone have any ideas or experienced this?

Hi Everyone, I have tried all the solutions mentioned by apple and still have a white screen with a blinking file folder with a question mark in the center, anyone have any ideas or experienced this?

Nooo or you would use OS X Recovery Mode: Disk Utilty and then Startup Disk.
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718
ExpressLane
https://expresslane.apple.com/
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725

What does a blinking file folder with a question mark indicate?

What does a blinking file folder with a question mark indicate? I cannot get past it or do anything with the unit.

glamiera wrote:
What does a blinking file folder with a question mark indicate?
That's the firmware telling you it can't find the operating system it's been assigned to boot from.
It could be because it forgot somehow, or the operating system is no longer there or readable or the hardware holding the operating system has failed.
Hold the power button to force a hardware shutdown, then reboot holding the option/alt key held down on the wired or built in keyboard, icons will hopefully load on the screen and if OS X appears, click the arrow to boot from it.
Once in OS X, head to System Preferences > Startup Disk and select your boot drive so it can remind the firmware.
If there is no OS X boot volume, just recovery or Bootcamp (if Windows installed) then you need to perform more work.
Create a data recovery/undelete external boot drive
To get a copy of your files off the drive.
Step by Step to fix your Mac
To fix your machine and find out (hardware test) if it's a hardware issue of some sort.

Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy

Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy

That means your iMac could not find a system to use for startup. That may mean the internal hard drive has become faulty, or the hard drive mechanism is fine, but the startup volume ("Macintosh HD" unless you renamed it) may have some type of data corruption that makes it unbootable.
First, you should try resetting PRAM
http://support.apple.com/kb/HT1379
and if that does not help, use this procedure to reset SMC (power management). If your iMac is from 2008, this is the procedure for Intel (not PowerPC) Macs.
http://support.apple.com/kb/HT3964
(This forum category is for "iMac (PPC)," so if this iMac is older (with a PowerPC processor), please post back.)
Disconnect all peripheral devices. When you connect it back to power, if you have been using a power strip of some type, try connecting it directly to a wall outlet, by itself (at least initially). Start up with nothing but the power cord connected, then add only standard mouse and keyboard. If it works, run it that way for a while.
If PRAM and SMC reset have no effect, you should insert your Mac OS X installation disc (for the currently installed system) in the optical drive, and restart with the C key held down. This should get you to the Installer screen, where you can run Disk Utility from the Utilities menu.
In Disk Utility, does the internal hard drive appear in the sidebar? If so, select Macintosh HD in the sidebar and go to the First Aid tab. Use Repair Disk. If an error is found, note if Disk Utility was able to fix it or not.
You can then quit Disk Utility and attempt to restart normally.

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

File Folder with a Question Mark Blinking-HELP!!!!

Its been like a day and half since i last used my macbook, and all of a sudden it won't work.
It still turns on but it goes to a white screen and stays that way for about 20 minutes. Then a file folder with a question mark in the middle shows up and blinks. It doesnt go away at all. The only way for me to make it go away is to either turn it off or to push the eject button, and now it just turns off all together.
When all this started happening it took a long time for it to even go to the home page, but it didn't go to the desktop screen. It would take a long time on the screen when it first turns on then a a lonnnnngggg time after that it would go to a light blue screen and then a longgggg time after that a pointer would show up, and thats all it would do.
Do I need to get the software that first came with it and put it in and see if it fixes the problem or what?
WHAT SHOULD I DO?!?!? please help.

You have corrupted system files. The following is a solution:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Blinking folder with a question mark at startup.

Similar Messages

Maybe you are looking for