Blinking HDMI menu items when HDMI cable is connected - Diagnosis?

I've been streaming live video through my Vixia HF G10 for the last year. Recently it has started to fail to send a signal through the miniHDMI out (or the capture card has failed to recognize it). I have noticed that when I connect my Vixia HF G10 to my Blackmagic Intensity Pro capture card, the HDMI options in the settings menu *blink*. Why is this? I can't find anything in the manual. I have already: 1. changed HDMI cords 2. reseated the capture card in the PC. 3. reset the camera. 4. added a signal repeater equalizer in line for the HDMI. Thanks for your help!

Hi wolfpack!
Thanks for posting.
When the connection status is blinking, this usually means there is a bad connection or the connection is not supported.  Typically, removing the extras in the connection or changing cables clears this right up. 
What happens when you connect the camcorder via HDMI directly to a TV?
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.

    I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.
    To do this I will need a 2x1 HDMI splitter or a 2x1 HDMI auto switch (preferred).
    ?Is there any Apple TV HDMI port voltage?
    When using a HDMI auto switch to connect two devices to a HDMI TV, the
    Auto switch cable box only works for components that do not output continuous voltage over HDMI port when turned off.
    Do you know of any other solutions? Componets? Actual expierances?
    Full text below.
    Cable : HDMI switches expand the number of available HDMI ports on a high definition television allowing connection of cable boxes, Blu-ray players, and game consoles. A side benefit is that cable clutter is also eliminated by running a single HDMI cable to your HDTV from a switch and relocating the HDMI ports to a concealed location. The problem with most HDMI switches is that you have to either get up to push a button, or hunt for the remote control, to switch sources. The true mark of any great switching component is an ability to perform its function and remain transparent in its operation. This automatic HDMI switch is a plug-and-play away from offering everything you are looking for in an HDMI switch. Select a single output from up to three devices for signal delivery to your HDTV. Smart operation provides complete control for connect-and-forget operation. Powering on a device gives it output priority over the other devices. By powering down the device in use, output priority is returned to the last powered on device. Note: Auto switch function only works for components that do not output continuous voltage over HDMI port when turned off.
    Here is a typical HDMI 3-in 1-Out HDMI Auto Switch
    http://www.google.com/products/catalog?q=hdmi+auto+splitter&rls=com.microsoft:en -us&oe=UTF-8&startIndex=&startPage=1&rlz=1I7GGLF_en&um=1&ie=UTF-8&tbm=shop&cid=1 0340892278237558532&sa=X&ei=fTPmTtOiHuXq0gGc3sHfBQ&ved=0CHsQ8wIwAA#
    Thanks for any help. Sincerely,
    HDMI auto switch?

    Hi Erico,
    I tried what you said again but without success. I even updated the driver so that that audio driver is the same as the graphics driver i.e.. NVIDIA but this has not helped either:
    Do you have any other ideas?
    Many many thanks,
    Louise

  • HP Pavilion dv6700 CTO Notebook PC and I hook to HDMI cable and connect to tv and get no sound

    i have a HP Pavilion dv6700 CTO Entertainment Notebook PC and I hook to HDMI cable and connect to tv and get no sound when attached to tv.  I attach the cable get the video but no sound.  I check sound and do not see anything other than the altec lansing speckers and realtek.  Th altec lansings are the default.  Help

    Hello gman0700.
    Welcome to the HP Forums. I understand you are unable to produce audio through an HDMI connection. I apologize for the late response, but I will do my best to assist you. Before anything else, please answer these questions:
    1. What is the current computer's operating system? Does the same behaviour occur on multiple operating systems?
    2. The title seems to imply that there is no audio when connected to a television, using HDMI. Does this only occur when you connect to a television? Will it occur if you connect to something else using HDMI?
    3. Have you tried connecting to a television using VGA or DVI? If so, what are the results?
    As an additional suggestion, for now, I would review the television's manual to confirm that everything is correct from the television's standpoint.
    Please post this information as soon as you can. Thank you posting on the HP Forums. Have a great day!
    Mario
    I worked on behalf of HP.

  • HT2646 Does the HDMI cable get connected to the TV or HD receiver if you have a Bose surround system

    In setting up apple tv does the HDMI cable get connected to the HD reliever instead of in back of the tv when u have a Bose system?

    Your best bet is to connect the AppleTV's HDMI to the Bose and the Bose HDMI to the TV. You could connect the AppleTV's HDMI to the TV and the AppleTV's optical to the Bose but optical (S/PDIF, specifically) does not have as much bandwidth as HDMI so you'd potentially have lower quality sound (from what I've read...I'm not an expert on audio).

  • Why can I no longer use hdmi cable to connect to the tv

    WWhy can I no longer use hdmi cable to connect to the tv

    Anyway, with the introduction of ios 8.x, apple stopped supporting older a/v cables. You need to get the latest a/v cable with the correct firmware. There is a little chip in the a/v cable. go to the apple store. Buy a new cable. Verify the cable works in the store.
    some people report success with a full factory restore.
    Re-boot ipad.
    Press and hold the Sleep/Wake button until a red slider appears, then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.  page 128 iPad user manual.
    force power down if the above give you trouble.
    Hold down both the Sleep/Wake button and the Home button. Ten seconds or more.  Hold until the Apple logo appears.
    more details on re-booting:
        http://ipad.about.com/od/iPad_Guide/ss/How-To-Reboot-Your-iPad-Power-Off.htm
    Restore to factory settings by loading the latest version of ios that your machine will support:
       Do a full backup of your device.  Twice is best -- cloud and computer.
       "You can use iTunes to restore your iPhone, iPad, or iPod touch to factory settings and the latest version of iOS."
       http://support.apple.com/kb/HT1414?viewlocale=en_US&locale=en_US
       "You can put your iOS device into recovery mode, then restore it using iTunes.:
       http://support.apple.com/en-us/HT201263

  • Photoshop CS5 crashes when you choose menu items when FinderPop is installed (Mac OS)

    FYI - Knowledge Base document was created to outline this problem and provide a solution:
    Photoshop CS5 crashes when you choose menu items when FinderPop is installed (Mac OS)
    http://kb2.adobe.com/cps/891/cpsid_89140.html

    FinderPop released a new updated version today.  It can be found at the below link.  Adobe makes no promises about 3rd party software, however my limited testing does indicate that the crash on inverse selection is fixed by this latest beta drop of FinderPop.
    2.3.0.6
    http://www.fnarr.net/fp/viewforum.php?f=3

  • During setup HP PSC 2175v printer locks up XP computer when usb cable is connected.

    During setup HP PSC 2175v all-in-one printer locks up XP computer when usb cable is connected. Only hard shutdown and restart to get computer working again works. How do you fix this issue?

    The USB port on the PSC2175V may be defective or the XP USB port is defective.
    Can you try the PSC2175V on another computer?
    Check the XP device manager for any problems, do other USB devices work ok?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Increasing brush-size crashes Win 8 - when HDMI cable is connected - Why?

    Photoshop Elements. Increasing brush-size crashes Windows 8 when HDMI cable connected to TV or data projector.  I'm using Asus N56V notebook with Nvidia 635M dedicated graphics card with latest driver.
    Any ideas please?
    Many thanks,
    Clive  (UK)

    Hi Brian,
    Here's an update:
    The nub of the problem has been determined by my computer expert as a conflict (as we suspected) between the graphics driver and screen resolution.  However the situation is far from dimple.  I'll be as brief as possible:
    No matter how we approach the settings for the Nvidia driver, when using HDMI, the 'workings' of the compuer automatically reset the driver to either the inbuilt Intel driver and if that's deliberately 'disabled' it reverts to the even more basic Windows 8 driver.  As neither card/driver is 'dedicated', the sharing that occurs between the native resolution of the notebook display and the external display (even if this is set to a compatible value)  the the computer crashes.  It remains OK if a single dsipaly (internal or external) is selected.  Dual display (which I must have) is the problem.  My computer expert is going to contact Asus about this. He even tried setting the global setting to Nvidia only and it still didn;'t succeed.
    I've since spoken with a colleague and he tells me that in the audio-visual community, this is a well known phenomenom with rexcent lapptops/notebooks no matter what to cost or spec - in so far as they ignor the 'dedicated graphics' when on HDMI in favour of the default (shared) driver and hence the problem. Apparently some notebooks are OK but one has to shop around and take pot luck.  What a state of affairs!
    The Asus notebook works OK using the VGA socket but let's face it, I bought this hi-spec computer for HDMI usage.
    This is the story to date.  It would appear that software is not the root cause.
    I will continue to pursue the matter and find a resolutuion (no pun intended - or perahps it was!)
    With all best wishes,
    Clive.

  • I used an HDMI cable to connect my MacBook Pro and my TV, however, my computer won't recognize that my TV is connected. What do I need to do to be able to watch a movie from my Mac on my TV screen?

    My Macbook doesn't have an HDMI port, so I bought a converter. So I now I have my HDMI connected to my Mac and my TV. The problem is, I can't figure out how to make my computer screen show up on my TV. Do I need to download different software or update something? Or is it as easy as changing a setting?
    When I go to my display settings, my computer screen shows up as an option, but my TV does not. I don't think my computer is reading it is connected. Please help me.
    I will openly admit that I don't know very much about computers, so if you can help me, please break your explaination down for me. This is the info for my Mac:
    I have a Macbook Pro 13-inch,
    Mid 2010 OS X
    Version 10.9.3
    Processor 2.4 GHz Intel Core 2 Duo
    Memory 4GB 1067 MHz DDR3
    Graphics NVIDIA GeForce 320M 256MB

    I am assuming that you are using a Mini Display to HDMI converter and then a HDMI cable.
    Have you opened System Preferences>Displays and selected Detect Displays?
    Ciao.

  • Using an HDMI cable to connect to a monitor from Macbook Pro, but no sound

    I just purchased a HP2159 HD monitor, and hooked it up to my macbook pro via an HDMI cable, but there is no sound. Can anyone help me?

    Dan Waylonis wrote:
    does anyone know how to properly set up the audio cable?
    What do you mean by "properly setup?" There is no setup. Just plug it in.

  • How to remove the menu items when remove Add-On

    I have built an SAP B1 add-on. Now when I remove the add-on the exe is still running as a process and the menu items are not removed. How do I take care of them

    hi.
    I am using below code... for killing the exe at process
    but i am not understood menu items.
    what type of menu items..
    once close the b1 where is menu items..
    can u plz explain..
      Private Sub app_AppEvent(ByVal EventType As SAPbouiCOM.BoAppEventTypes) Handles objApplication.AppEvent
            Try
                Select Case EventType
                    Case SAPbouiCOM.BoAppEventTypes.aet_ShutDown
                        objApplication.MessageBox("A Shut Down Event has been caught" & _
                            Environment.NewLine() & "Terminating 'Add Menu Item' Add On...")
                        '// terminating the Add On
                        ' oApplication.SetMessage("SAP Business One is Shutting down..", SAPbouiCOM.BoStatusBarMessageType.smt_Warning)
                        System.Windows.Forms.Application.Exit()
                    Case SAPbouiCOM.BoAppEventTypes.aet_CompanyChanged
                        objApplication.MessageBox("A Shut Down Event has been caught" & _
                            Environment.NewLine() & "Terminating 'Add Menu Item' Add On...")
                        'oApplication.SetMessage("Company has been changed.", SAPbouiCOM.BoStatusBarMessageType.smt_Success)
                        System.Windows.Forms.Application.Exit()
                    Case SAPbouiCOM.BoAppEventTypes.aet_ServerTerminition
                        objApplication.MessageBox("A Shut Down Event has been caught" & _
                            Environment.NewLine() & "Terminating 'Add Menu Item' Add On...")
                        'oApplication.SetMessage("All Add-on are Shutting down..", SAPbouiCOM.BoStatusBarMessageType.smt_Success)
                        System.Windows.Forms.Application.Exit()
                    Case SAPbouiCOM.BoAppEventTypes.aet_LanguageChanged
                        objApplication.MessageBox("A Shut Down Event has been caught" & _
                           Environment.NewLine() & "Terminating 'Add Menu Item' Add On...")
                        ' oApplication.SetMessage("System Language has been changed.", SAPbouiCOM.BoStatusBarMessageType.smt_Success)
                        'Case SAPbouiCOM.BoAppEventTypes.aet_CompanyChanged, SAPbouiCOM.BoAppEventTypes.aet_LanguageChanged, SAPbouiCOM.BoAppEventTypes.aet_ServerTerminition, SAPbouiCOM.BoAppEventTypes.aet_ShutDown
                        '    System.Windows.Forms.Application.Exit()
                End Select
            Catch ex As Exception
                'oApplication.StatusBar.SetText(ex.Message)
            Finally
            End Try

  • I can't find the image object menu item when trying to add an image placeholder in dreamweaver cs6

    I am new to dreamweaver, and am walking through some tutorials.  I can't seem to find the image object menu item to place a image placeholder on my page.  Any suggestions?  Do I have a setting that is currently hiding its visibility?  Thanks  (I am currently working with dreamweaver cs6)

    They removed it in the new Cloud version of DW CS6.
    http://blogs.adobe.com/dreamweaver/2012/10/dreamweaver-creative-cloud-update-12-1-faqs.htm l

  • I PURCHASED A ITUNES MOVIE AND DOWNLOADED IT ONTO MY LAPTOP, WHEN I USE MY HDMI CABLE TO CONNECT IT TO MY SONY HD TV. THE MOVIE WILL PLAY BUT STOPS FREQUENTLY, I AM NOT SURE IF IT IS THE END OF AN CHAPTER OF THE DOWNLOADED MOVIE

    i purchased several itunes movies and when i play my dell xps laptop connected to my sony hd flatscreen. the movie stops all the time and can be restarted but is anoying, is the chapter not playing continously. i am using  a hdmi cable

    Hi there kirk279,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    -Griff W. 

  • I have the macbook purchased in early 2010 and i just bought a kanex hdmi cable to connect my laptop to my tv so i can not get sound on my computer. I then was told to purchase the monster icable to get sound but i still can not get sound. help?

    please help

    If you connect the MacBook using a Mini DisplayPort/HDMI adapter you will need to use external speakers for audio. The Mini DisplayPort/HDMI doesn't carry audio and there're usually no audio plugs on the TV to work with HDMI since it's expecting audio with the HDMI. Only the Mid-2010 (7,1) MacBook can output sound along with video to your HDMI. All others output video only with the HDMI adapter.
    If your TV has a DVI plug you can use a Mini DisplayPort/DVI adapter. The TV will have RCA audio plugs for use with the DVI.
    Some of the newer TVs can use different input audio plugs with the HDMI. You'll have to check with your TV manufacturer to find out if your TV can do this.

  • I have a mini iPad with which I take pictures and capture video. In order to see them on my home tv I bought an Appletv and HDMI cable  and connected it to my home tv, Now I can see the pictures but not the video.Solution please?

    How can I view on my home TV videos that I captured with my mini iPad?

    Hey andrikos175,
    Thanks for the question, and welcome to Apple Support Communities.
    You are on the right track, you'll want to AirPlay these videos to your Apple TV. If you are having issue with AirPlay, please see the following troubleshooting resources:
    Using AirPlay
    http://support.apple.com/kb/HT4437
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    Thanks,
    Matt M.

Maybe you are looking for

  • How to do exporting Forms and Reports using Navision Tool 2009

    Dear Microsoft, I am looking for the information for exporting my all forms from NAVISION 2009 tool to desktop in extracted form,till now we can export them either single form or consolidated forms dump, but my query is if my project has 6 forms then

  • Get client ip in web reports 9i

    Hi we are using oracle 9i reports. we want to get client's ip address when running web reports. We are having forms which gets the ip address using webutil but the same functionality is not available in web reports. How can this we get the client's i

  • Application module Code

    hi all, at present iam working in jdev 11.1.1.3 i write one method in application module,add to the client interface also and when i click one button in my page(.jspx)that method is exectuted automatically ,how to navigation to the button and my code

  • TFS Build and vNext Release Trigger issue

    When the build definition is set to "True" for release – getting the error even though the Release template was linked to the Build definition. ERROR: No release template matching the current build definition was found to create a release and deploym

  • I was never emailed a receipt of my purchase. How do I get one?

    I purchased an iPad in store last July and chose to have a receipt emailed to me rather than printing off one there bit I never received an email with the receipt. Now I need a receipt to insure it. How do I get them to send it to me?