Blinking icon mark question :-(

Hi, my computer show this icon with a mark question blinking before the startup, then I shut it down from the power bottom and then it makes the startup normally. What suggest me.

When you say you tried fsck and 'nothing', do you mean you ran fsck in single-use rmode and it reported no problems, or that it didn't help? Have you tried running Disk Utility> Repair Disk from the Installer menu after booting from your OS X Install disc? (That gives somewhat more descriptive messages than fsck). You can also reset PRAM by restarting, then immediately after the screen goes dark, hold down command-option-p-r until you hear three sets of chimes, then release the keys. That will reset the startup disk to the hard drive, overriding any possiblly corrupted System Preferences settings.
Does the 'blinking icon with a mark question blinking before the startup' referred to in your first post occur when you try to restart via the command under the Apple menu or does this occur first time you try to start up from being turned off?

Similar Messages

  • Blinking Folder Icon with Question Mark at startup - Is my HD dead?

    I was uploading a .Mov file to my idisk when I got an error message - not sure what it said. But the screen dimmed, and then froze. I held down the power to power down - which it did.
    When I fired it back up, I heard the startup sound - then the screen went white. A gray folder icon appears with a question mark over it - and it blinks.
    I tried powering down again and unplugging, and also powering on with all peripherals unplugged. Again I get the white screen, folder icon and question mark.
    That .Mov was being uploaded as a freelance project for Google due tomorrow morning. Great timing! Am I screwed?
    Thanks!
    Gordon

    I booted from the Mac OS X Install disk and opened the Disk Utility.
    The options for disks to repair are
    1. The Mac OS X Install Disk 1
    2. A drive that's simply labeled "Media."
    Is this "Media" disk my HD? I'm not getting any options to repair the disk.
    Disk Description: Media
    Connection Bus: Serial ATA 2
    Connection Type: Internal
    Total Capacity: 0 Bytes - that doesn't sound good.
    Write Status: Read/Write
    Again, thanks for your help.
    G

  • I am getting a blinking folder with question mark when I boot my computer, what does this mean?

    This morning when I turned on my laptop, it made a weird ticking noise and now all I can get is a blinking icon that looks like a manilla folder with a question mark.

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion, 10.8 Mountain Lion or 10.9 Mavericks, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7, 10.8 or 10.9 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • Blinking folder with question mark! Recovery mode not recognising hard drive!

    So today on my MacBook Pro 13" mid 2010, for some reason a CD that I inserted inside the DVD/CD drive didn't come out, and was stuck inside. So I looked up on how to force eject it out, and I saw someone wrote that you can force eject the CD by putting a paper clip inside the hole next to the CD/DVD drive. I did this, and it did not work. After I turned on my MacBook Pro and on the startup I found the blinking folder with question mark! I went through Internet recovery mode, and I found out that it did not recognise my hard drive!
    -Do I have to replace my hard drive?
    Please help! I'm fairly new with computers :(

    Kazmunai wrote:
    I saw someone wrote that you can force eject the CD by putting a paper clip inside the hole next to the CD/DVD drive. I did this, and it did not work.
    That was for very old Mac's and PC's, it's been a long time since any modern Mac had that ability.
    CD that I inserted inside the DVD/CD drive didn't come out, and was stuck inside.
    Press and hold the power button down to force a hardware shutdown.
    Hold the trackbutton down and the option/alt key at the same time, now boot the machine.
    The disk should spit out and you should eventually see a row of icons appear on the screen, this is Startup Manager and you can pres the eject key here also to get the cd to spit out.
    If you see MacintoshHD (or your OS X boot volume) click it and the arrow underneath and when you get into OS X, head to System Preferences > Startup Disk and set it again. Your problem should be resolved at this point.
    If you don't see your OS X boot volume and it shows RecoveryHD only, or holding the option/alt goes to Internet Recovery, then your boot drive is dead or there is some sort of other issue/power /Mac related.
    Try a #1 SMC Reset and a #2 PRAM reset and see if that fixes things.
    ..Step by Step to fix your Mac
    If not, I then suspect because you couldn't eject the cd that something electrical bad happened to the Superdrive and as a result it also effected the power or something going to the boot hard drive.
    The hard drive might still work just fine if it's removed from the machine and a SATA to USB adpater to another Mac.
    My advice is to take the machine to Apple for a free hardware evaluation, then decide what you want to do from there.
    My computer is not working, is my personal data lost?

  • Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

    Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings 
    in response to Niel
    Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
    Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

    Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
    On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

  • Blue icon with question mark instead of image in email

    Sometimes I get a blue icon with question mark instead of image in email, when viewing in Apple Mail Program.
    Does anyone know why?????

    I'm asking your thread get redirected to the proper forum. Please read this tip on how to post on Discussions for future threads:
    http://discussions.apple.com/thread.jspa?threadID=1574700
    Is this issue with Tiger or Leopard? Your profile indicates you have a machine with Tiger, yet your signature of your post says you have Leopard.
    Also, there is no such thing as a Powerbook Pro. Read the text under the screen to tell us exactly which model you have. MacBook Pro is the name given to Macs that are for the pro lineup of notebooks once Apple shifted to the Intel CPU.
    Message was edited by: a brody

  • Hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

    hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

    On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
    http://liondiskmaker.com/
    Then boot from that on your computer and install
    You need an internet connection to install via Recovery mode

  • White screen with flashing file icon with question mark mean

    What does this mean.   We are getting a white screen with flashing file icon with question mark inside the file. 

    It almost certainly means it can't find a bootable volume (one with OS X on it).
    Which means most likely you will have to find your original system installation DVD and install it. Then you should figure out what caused the problem.
    Read this to diagnose it before resorting to reinstalling the OS:
    http://support.apple.com/kb/TS1440
    Excerpt:
    Additional steps
    If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
    Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
    If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
    MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
    Restart the computer, then hold the C key during startup.
    From the Utilities menu, choose Disk Utility. Don't click Continue.
    Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
    Click the First Aid tab.
    Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
    After repairing the disk, try to start up normally.
    Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
    If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
    If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
    If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.

  • My computer has a blinking folder with question mark on it at start... What is going on?

    My computer has a blinking folder with question mark on it at start... What is going on?

    The hatter wrote:
    also that the default is no longer set  asin when someone had windows as default and removed it w/o changing Startup Disk panel.
    Oh yes, I forgot that people still do that

  • Flashing folder icons with question mark

    After reading through the forums I've found a few discussions and users that have similar problems as me but haven't seen anything that deals directly with my issues.
    After upgrading to Leopard last night, it ran sluggishly for about 15 minutes. I got impatient and decided to restart. While trying to restart it froze, so I just shut my powerbook down. When I tried to boot back up I got the "flashing folder icons with question mark", I've since found out that it isn't finding any type of drive to boot off of. I reset the pram, tried to reboot with the same result. Tried to boot up using cmd-s but still got nothing but flashing folders. Booted up from the Leopard install disc to try and do an archive and install and it said it couldn't upgrade because it couldn't find tiger on my machine. So I booted from the Tiger install discs to try and re-install tiger again. Tiger cant find my HD to install on; I'm thinking this may be due to Leopards install. I ran disk utility and it couldn't complete the verifying process. I got this "Error: The underlying task reported failure on exit."
    After work I'm going to try to boot up in target mode to pull any data i can and try erase my HD and install from there.
    To me it seems like a HD issue. Anyone have any thoughts?
    Thanks in advanced.
    -Chance

    Chank wrote:
    After reading through the forums I've found a few discussions and users that have similar problems as me but haven't seen anything that deals directly with my issues.
    After upgrading to Leopard last night, it ran sluggishly for about 15 minutes. I got impatient and decided to restart.
    The "sluggishness" is perfectly normal. It's well-known and it is not an issue.
    You should have waited for spotlight to finish indexing.
    You may have broken some links by forcing a shutdown while things were still being setup.
    Which install method did you use, upgrade, archive or erase?

  • Pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?, pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?

    pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?, pls my macbook air is not booting up,when i switch it on the apple logo blinks with a question mark in it.what do i do?

    See here  >  http://support.apple.com/kb/TS2570

  • Blinking folder with question mark, and disk utility doesnt recognise hard drive, please help!!!

    So today i was using my macbook pro and for some reason my CD/DVD drive was causing noise when i put a DVD inside it, and for some reason it did not recognise my DVD. I force ejected it using the restart and clicking, but after that my computer showed a blinking folder and question mark during start up. I restarted my computer to Recovery HD, but instead it took me to internet Recovery HD (i have mountain lion), and so i went to disk utility to repair my disk, but in the left it did not recognise my hard drive. Please help! Im not that experienced in computing!

    Sounds like some sort of power issue and now your drive is not working.
    You'll have to take this to Apple for repair.
    You should read this if you don't have recent backups of your data off the machine.
    My computer is not working, is my personal data lost?

  • Dock icons now question marks

    I just got the new iMac today and transfered my data from my old imac to this one via Firewire. Now all my dock icons are question marks. How do I update them?

    I just tried something. I printed a page from my printer; printer icon showed up in dock.  I quickly right clicked on the icon and selected Options/Keep in Dock.  Now my icons are back.

  • White screen with file icon and Question mark after a kernel panic???

    I'm using my girlfriends 20" iMac and her computer keeps having kernel panics. And then at times when we restart the computer, we get a white screen with a file icon and a question mark inside. Any ideas on what to do???? Her graduation project is on that computer and she is stressed like you wouldn't believe. Safe to say, I'm taking the brunt of it. Please help!!!

    It sounds like you might be having a hard drive problem. The folder icon with question mark means the computer can't find a startup drive/system folder. I suggest that you back up all important data, especially her project. Before bringing it in for service, run the Apple Hardware Test - put in your original system restore DVD and restart the computer, holdng down the "D" key. Run the extended diagnositics (it will take over an hour (depending on how much RAM you have) and will tell you if there is anything wrong with your hardware. If it dinds a problem then you can take it to the nearest Apple authorized service provider to check it out.

  • Blinking Icons

    Hello to all,
    I know there is animated gif support in swings, but I have an question.
    Imagine, java application, communicating throug corba ( 1 tink 12 Threads used for his coomunication:) splitted pane, with treem where each leaf has its onw animated gif, 2. pane static pane, without something extra ( some controls using observre observable pattern to update its content )south pane, own list pane, containing 1 list and one JTable derived component, which should be updated with datas, which are send by server to client ( approx 1500 items/min into this table ), and the last on, North pane containing some JButton derived components (aprox 50 ) which also has animated gif on it.
    So this is fully quilified client :), but at this time we are not using any blinking icons because I think its impossible ( when tree is opened there is 100 of leafs, which has its own icons, and these icons, shlud be animated :( ( I think it is a worth solution I've seen in my life, but product management need it, so it should be done. ISO halleluja :( )
    I want to ask us, that is is good solution to make my thread for icns, and instead of animated gifs use some number of static gifs, and animation do with my thread. I think there will be synchronization problems with AWT thread, but nobody knows, maybe somebody met this problem also.
    Thank you for answers.
    regards
    Adrian.

    I'm not sure what all that was about, but I think you just want to animate the icons in a JTree, correct?
    Check out these examples:
    http://www2.gol.com/users/tame/swing/examples/JTreeExamples4.html

Maybe you are looking for

  • Thermocouple output question

    I am having a issue with the output of the temperature I want to take the output temperature an compare it to the max an min that are given on the left hand side of the VI.But I cant take the output of the temperature an put it on middle of the compa

  • Drag and Drop between Flex application

    Hello, Can we implement the Drag and Drop functionality between 2 FLEX applications? Each flex application is in its own IE. Thank you, Thierry

  • How do I delete/trash an Application (package)?

    I am the administrator of a stand alone Mac and I need to remove a couple of apps from my hard drive completely. If I send one to the trash it re-appears in the Applications folder immediately, never showing up in the Trash folder. How do I get rid o

  • Lightroom 5.5 won't open after update

    I updated to Lightroom 5.5 using the Creative Cloud app, but the program will not open. I uninstalled and installed again, restarted, and logged on as a different user, but none of these things solved the problem.

  • Scheduling of Discoverer Reports and emailing output to multiple recipients

    Hi, Is is possible using Oracle Discoverer Server (Plus and Viewer) version 10.1.2 to schedule workbooks and then have the output of the scheduled workbooks emailed to multiple email recipients at the time the scheduled report completes? Kind regards