Blinking icons/texts/windows while AE4 is running

Hello all.
I have some weird problem. When i open After  Effects CS4, icons, other programs and After Effects of course starts to  blink, lag and so so. When After Effects isn't running, everything  works fine. At first i thought that this is a OS problem, so after ~2  months i bought new HDD and formated it, installed Windows XP SP3,  installed After Effects CS4, but problem didn't dissapear.
Video: http://www.youtube.com/watch?v=mS6749ID0Zc
*These warnings are from wrongly installed cycore HD.
I've  asked on my country hardware forums, they said that it's a GPU problem  and my videocard going to die in one month, but i'm still living with  this problem for three months. However, i think it's not GPU problem,  because that problem appears to be only in After Effects. And if it is  GPU problem, is this possible to fix it? I also tried to install Trial version.
* Sorry for my bad english.

However, i think it's not GPU problem
Trust your hardware geeks - it is. The only question is whether it is a driver problem or a genuine hardware problem, but I, too would lean toward the latter. Such blips are typical of defective or overheating graphics chips or the peripheral equipment. In essence it is constantly crashing your graphics chip and trying to catch these errors by reinitializing it. This may not be the card itself, but a bad PCI slot or one of those tiny resistors on teh motherboard losing contact when it gets warm, causing voltage variations that your card can't handle. could even be a hairline fracture in one of the electric lanes... In any case, it will probably not be fixable short of buying a new motehrboard and graphics card...
Mylenium

Similar Messages

  • How to hide a cmd.exe window while my app run

    When i start my application whit .BAT, console window show's too.
    How can i hide this console window?

    I would say use a native installer if possible. Install4J is a very reasonable price, $400 or something and works on windows, mac osx and solaris/linux, provides native launchers on all platforms and can do quite a bit more than that. Very small price to pay if you are working with commercial apps or have a little money to spare and want your apps looking good.
    VAInstall I think is a free opensource that does alright, a bit more complex to use, but works. I think it has an .exe launcher on windows.

  • While i was running boot camp to install windows 7 i had to cancel operation. Now my mac comes up black screen with a curser at top

    while i was running boot camp to install windows 7 i had to cancel operation. Now my mac comes up black screen with a curser at top

    First of all, start your Mac with the Alt key pressed until the boot manager apears. If your keyboard is wireless probably you should press the power button at the same time you start the Mac.
    After, go to Bootcamp Assistant and remove the windows partition and do all the process again.
    Remember to remove all the USB/Firewire/Thunderbolt devices that are attached to the Mac during the windows installation.
    Once windows boots for first time, install windows support software with all the drivers.
    IMPORTANT: If the windows partition doesn't boot correctly (Black screen with white blinking cursos at the left top corner) do this steps to boot windows:
    1- Start the Windows Installation DVD at system start.
    2- Click on Repair System, not install.
    3- Select Command Prompt
    4- Run these 3 commands: (Press enter for each command)
         Bootrec.exe /FixMbr
         Bootrec.exe /FixBoot
          Bootrec.exe /RebuildBcd
    5- Exit command line (type exit)
    6- Click on Restart button.
    7- Boot the Mac and you will see that It automaticaly loads windows
    Tell us how it goes!!
    PS: Sorry for my bad english!!!

  • As i was installing Final Cut Studio i cancelled it while entering the details, to go to bed. I tried to reopen the installer window and it just comes up with a Terminal Text Window, can anyone help?

    As i was installing Final Cut Studio i cancelled it while entering the details, to go to bed. I tried to reopen the installer window and it just comes up with a Terminal Text Window, can anyone help?
    It may have half installed the software so dose anyone know if i can reinstall or delete what it has installed?

    after using FCS remover run  disc repair:
    shut down the Mac
    Hold the Shift key on keyboard and start up the Mac
    The Mac will run the repair tasks it takes 10- 30 minutes, then it will boot up normally
    insert the FCS DVD in the drive and install FCS again.

  • While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

    Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
    == Today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I have an old file that was made by macromedia flash,but I can't run this file in my Windows 7 64-bit ,while I can run it in Windows XP 32-bit

    I have an old file that was made by macromedia flash,but I can't run this file in my Windows 7 64-bit ,while I can run it in Windows XP 32-bit

    Hi momi macrom,
    Have moved your post to the Flash forum. Experts here are better placed to help you.
    Thanks,
    Preran

  • Error: 0x8007041D on a computer running Microsoft windows non-core edition, run 'slui.exe 0x2a 0x8007041D ' to display the error text

    OS : Windows Server 2012 R2
    Windows Activation Error
    Error: 0x8007041D on a computer running Microsoft windows non-core edition, run 'slui.exe 0x2a 0x8007041D ' to display the error text
    Description :
    The server did not respond to the start or control request in a timely fasion

    Try the following:
    Uninstall and Re-Install the PK
    Open up an elevated cmd and enter the following commands:
    slmgr –upk
    This will uninstall the current Product Key
    slmgr –cpky
    This will clear the product key from the registry
    slmgr –rilc
    This will re-install the System License Files
    slmgr –ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
    This will install your Product Key
    slmgr –ato
    This will activate your Product Key
    NOTE: Useful commands for SLMGR
    -dli -> Display License information
    -dly -> Display detailed License Information
    -upk -> Uninstall Product key
    -ipk -> Install Product Key
    -ato -> Activate Windows
    -rearm -> Reset the Licensing Status of the machine
    This post is provided AS IS with no warranties or guarantees
    , and confers no rights.

  • Firefox will not open unless I run it in compatibility mode (Windows XP SP 3), run it as an administrator, or launch it immediately after a reinstall (the reinstall thing only works once.) How do I fix this?

    This morning, Firefox crashed. After this, when I click the Firefox icon, the hourglass appears and then nothing happens. Firefox does briefly appear in the task manager when I do this.
    I tried rebooting. I tried reinstalling multiple times. (Firefox will run when I select "Launch Firefox" from the installer. Then the problem occurs again.) I tried safe mode. I have found that Firefox will work if I select Windows XP compatibility mode from the icon properties menu or if I run the program as an administrator. When I do this, Windows asks me if I want a program to be able to make changes to my computer.
    I have noticed that a Windows Error Report is being generated each time Firefox will not open.

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • How can I get an Extension's toolbar icon to display image without text (without universally affecting other icons)? How can I edit the icons text (save space)?

    "From the Show dropdown menu, you can choose what to display in the toolbars: icons, text, or icons and text together. By default, Firefox shows icons only." Is there a way to choose an individual setting for a specific toolbar icon to be icon only (no text) without universally affecting all other icons on the toolbars?
    Second, is there a way to edit the text on a specific toolbar button from an extension (because it occupies too much horizontal space on the toolbar due to the amount of text)? I do know how to locate the xpi file & open it with notepad, but then it's mainly code (not English) & FIND doesn't locate the button's text (to edit it).
    These 2 questions should apply to Extension buttons in general. However IF it makes any difference I'm referring to the Toolbar Button in Back To Top 7.0 which says "Go to top/bottom". I'd at least like to edit out "Go to", but my questions apply to other Extension buttons too. I do realize it may be necessary to redo any fix/change each time there is an update? THANK YOU.

    We use the DOM Inspector to find the IDs and Class Names of elements.
    * DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/
    The DOM Inspector (DOMi) has a menu item (Edit > Select Element By Click) and a toolbar button "Find a node to inspect by clicking on it" (left icon on the toolbar in the DOMi).
    * open the browser window in the DOMi (File > Inspect <b>Chrome</b> Document) and choose the first from the list.
    * click the "Find a node to inspect by clicking on it" button and use the keyboard (Alt Tab) or the Task bar to go back to the browser window (do not click in the browser window other than the title bar).
    * click that element with the mouse and keep the button pressed until you see a red border to indicate the the DOMi has located that element in the DOM tree.
    * https://developer.mozilla.org/en/DOM_Inspector/Introduction_to_DOM_Inspector

  • The icons in the bookmark tool bar are blank and the text that use to be below the icon is gone. I now have to cursor over the blank icons to see the text and the one I want. Can the icon/text customization be returned?

    In the Navigation Toolbar, the icons "Back", "Forward" etc. show the small icon and the descriptive text below the Icon. My Bookmark Toolbar use to have the same icon/text format but at some point, possibly a browser update, that changed. Currently, I do have a visible Bookmark Toolbar BUT the icons do not show the website icon, as previously, and the text below each icon is gone. I an cursor over each icon and the text becomes visible next to the icon. This is a bit of a pain to find a bookmark. Can I do a customization to return to the icon/text format.
    Was this changed because browser users requested this option, or was it an internal decision.? If the later why make such changes when not requested?
    Ed Sander

    That wasn't a change in Firefox. It sounds like something is broken in your Firefox installation, or you are misunderstanding the different between the Bookmarks Toolbar and the other Toolbars.
    In the Bookmarks Toolbar the text appears next to the website icon, not below the icon as with the other two Toolbars, and it's not switchable between text and no text as with the other Toolbars. With both the bookmark icon and the Bookmark name missing, something is broken in your installation. You need to do a little troubleshooting.
    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]
    If your problem isn't related to an extension, your bookmarks data base file (places.sqlite) is probably corrupt. <br />
    http://kb.mozillazine.org/Locked_or_damaged_places.sqlite <br />
    Be aware that if you delete the "places.sqlite" and similar files, your bookmark website icons won't automatically appear (the JSON backups don't have that icon data) when you restart Firefox and the places.sqlite is rebuilt using the backup data file, but the icons should be saved the first time each bookmark is used for the first time.

  • Error while trying to run reports

    Hello,
    I am getting the following error while trying to run/launch AIX based Ora. Apps 11.5.10.2
    $ rwbld60
    Error: Object "" does not have windowed ancestor
    Does anyone know what could be causing this?
    Thanks,
    Chiru

    Hi chiru,
    it seems to be some environment problem ????Hey Mitra,
    Thank you for the reply.
    It definitely is an environment related issue(that is what I am trying to find out)
    This is occuring in our DEV environment. It works fine in TEST and PROD.
    More than likely it is due to low resources in the DEV...but I figured some one would have seen it before....and would answer my question with a definite answer.
    Thanks,
    Chiru

  • Lync 2010 and Lync 2013 blinking icon in taskbar not working properly

         Hi,
         We're experiencing a strange behaviour. Lync IM notifications are supposed to work this way below:
         1) Notification bubble on the right-bottom corner
         2) After a few seconds, a blinking icon in the task bar
         3) After a few seconds, a coloured icon remains in the task bar
         Some of our users, both Lync 2010 and Lync 2013, go 1) and 2) but then icon won't remain in the task bar, so they don't realize they have a conversation waiting (Windows XP and Windows 7).
         If they open the icon, the conversation is there and coloured, and they can answer.
         In my computer, it has also happened but most of the time it works fine (testing it, maybe it works 15 times and fails 1). Nevertheless, a lot of people is suffering from this strange behaviour.
         We have looked into the causes but haven't found anything.
         Any clue?
         Thanks!

    How long have you seen the problem?
    What version of your Lync client? Try to update your Lync client to the latest version.
    Try to repair office 2013.
    Uninstall and reinstall Lync 2010.
    Please install Lync 2013 or Lync 2010 on a fresh installation of Window to check if you can still see this problem.
    Lisa Zheng
    TechNet Community Support

  • Windows antirootkit tools that run in Linux

    Today I just finished repairing someone's Windows Vista installation. The person in question had come across a hacked website while browsing with UAC and Protected Mode turned off, relying solely on McAfee AV and Windows Defender for their protection.
    I was (apparently) able to clean up the aftermath using the Kaspersky live CD, Malwarebytes Antimalware, and HijackThis. However, several Windows based antirootkit tools I tried to run - Gmer, Avira Antirootkit, and Rootkit Revealer - all failed, leading me to suspect a rootkit infection. The (generally poor quality) antirootkits I could get running didn't turn up anything, but I was still suspicious.
    I wound up abandoning the rootkit search after scanning with SuperAntiSpyware and ClamAV and Avira live CDs, as well as Sophos Antirootkit and Trend Micro RootkitBuster, all of which turned up nothing. But I'm still annnoyed that I wasn't able to get in a dedicated antirootkit scan from a live CD.
    Now normally my solution would be to create a BartPE live CD with Gmer or something on it. Unfortunately though, I don't feel like forking out a day's worth of work for Windows 7 or Vista SP2, and the security situation on XP SP3 has gotten so vile that I feel it's simply no longer viable as a personal OS. So my netbook has only Linux partitions now, and all the other computers in the house are either Ubuntu LTS, Windows 2000, or G3s running MacOS 9.x. (No I'm not kidding.) In other words, BartPE would be a real pain to set up.
    So...
    Does anyone know of dedicated software for detecting Windows rootkits, that can run in a live Linux environment? It looks like I got lucky this time, but next time I'd rather not rely so much on luck.

    ckrootkit and rkhunter are both good, but neither are dedicated to Windows.

  • How to scroll up and down in IBM client access using windows 7 on mac running bootcamp

    How to scrool up and down in Client Access 5250 (AS/400 emulator) using windows 7 on Mac running boot camp. The key board does not function within the client access 5250 session?

    You can also share a printer between the Mac/PC as well as files and mounted Volumes, see the Tiger articles here
    http://www.ifelix.co.uk/tech/
    You may want to use Bonjour for Windows on your PC
    http://www.apple.com/macosx/features/bonjour/
    Then there are VNC clients for Mac/PC that also allow you to actually control the other machine, if they aren't in the same room and you just need to check something quick that can be handy, it's kind of slow though for regular use.
    The main benefit of partitioning is being able to have different versions of bootable OS on them. You can try out Leopard on a new partition, while keeping your Tiger partition intact, you can have a XP/Vista partition for parallels or BootCamp, etc... other than that drives are pretty much fast enough, having smaller partitions probably won't realize any significant speed ups over searching the whole large drive.

  • Whenever I click on the Itunes icon, a window pops up saying that `The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes`.  I then click ok and the pop up vanishes.  Any ideas as to what I should do?

    Whenever I click on the Itunes icon, a window pops up saying that `The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes`.  I then click ok and the pop up vanishes.  Any ideas as to what I should do?

    What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
    Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future.

Maybe you are looking for