Blinking light and black screen

My 3rd gen apple tv light was blinking and giving a black screen. I reset it using my laptop nas instructed. It is still doing the same thing. (Light flashing and black screen) Where do i go from here?

May be an issue with it but try holding menu and up key on teh remote TOGETHER for 6 secs in case it's selecting an incorrect video mode - that option will cycle video modes. Check HDMI connection to display is not loose at either end.

Similar Messages

What is this code mean, ( 14 slow blinking lights and 5 fast blinking lights) mean

need to know what this means please, 14 slow blinking lights and 5 fast blinking lights) mean

thank you thank you for taking an interest. this is so frustrating.
i only have apple keyboard, mighty mouse, and 20 inch cinema display connected. this morning took out memory and tried to boot up with individual pairs in the first bank. first the (2)256, the (2) 1g, and then the other (2) 1g modules. everytime I get the weird fuzzy wheel under the logo after a while, black screen flashes, then grey apple logo fuzzy screen then black forever.
I ran tiger updates this morn. still will only boot to safe mode. then tried to run leopard disk to install it
will not boot from leopard disk.
tried safe boot, then doulble click install leopard, restart, then the saga repeats with the pixely red square around the wheel.
these are fresh drives with only what came on instll disk loaded.
thanks again for taking an interest.
i love this system(well at least i did). I want to install leopard on my powerbook too but am terrified to do so right now since it is working and I have work to do. Can't afford to have no computer to do my work on...self employment is great?!
This is making me crazy. I anxiously await your words of wisdom.

ITouch camera blinks green and black, sometimes purple

I have an iTouch 4G and a few months ago I dropped it, there are cracks but everything worked fine, now after five months the camera will not work. The screen blinks green and black and sometimes purple, I reset it, restored it, but it still doesnt work. I'm sure it wasn't from dropping it because it's the camera on the back that does not work. I'm still eligible for the warranty but will they not honor it because of the cracked screen? Thanks

Apple will exchange your iPOd for a refurbished one for $99, $149 or $199 depending upon the capacity.
Accidental damage like dropping the iPod voids the warranty for the entire iPod.

C8180 flashing lights and blue screen with code B0379A21

my printer is a little over 1 yr old and hasn't even done enough ptinting to change the ink cartridges. lately, when off and
no computer on, the lights will all flash and the screen is blue showing B0379A21. you also cannot use the printer shut off button to turn it off and you can't change the screen. the only way to stop it is to turn off the main power. help!

will try the recommended removal of ink cartridges and unpluggig of the usb cord. i am not sure that this will be the fix
because it only does it intermitently and only when the printer is off. also, one of the blogs said something about having
the printer plugged into a surge protector and the tech said that the printer had a built in surge protector and that it should be plugged direct into the wall and that should get rid of the blinking lights and code. do you know if the C8180
also has a built in surge protector and a possible cause of the problems come from the power strio?

T60 exhibiting 1 long and 2 short beep and black screen

Hello all,
i own a thinkpad t60 with ATI radeon x1300 graphics card. I read through your complete "T61p exhibiting 1 long and 2 short beep and black screen" thread and I have the same beep problem with my t60. Let me briefly explain you how the beeps occur in my system:
My t60 had this problem after I initally formatted my system and this 1 long and 2 short beeps used started occuring. But the strangest fact is that after those beeps and blank screen, the power light in the indicator light group is on along with battery and ac power lights. But then when I repeatedly switched on and off the system, the sequence of beeps dont occur all the time. Then I completely switched off the system and when I booted the next times I started pressing the ESC keys after pressing the on button. Most of the times ( 8 out of 10 times), the first 4 times it produced the same beep codes but after the 5th time, the system turns on. All those 5 times, I kept on pressing the ESC key once I powered on the system.
Also, every time I'd a chance I did run the pc doctor to find any pro blem with the board or video card, but every time it turned out to be fine. So now,every time I turn my system off or use a stanby/hibernate whichever turns the screeen off, on immediate reboot it comes out blank but with the power indicator light on.
Here by I also list any changes that I'd made:
1. I reformatted the system and only then this started to occur.
2. after reformatting lsat time, I forgot to change the boot sequence but now I;d fixed that by pressing F9 under startup in bios.
3. I'd also once replaced my RAM with a different one (have 4gb now, but I suppose t60 can support a max of 3gb). WIll this be a problem?
4. And in the recent times due to the ati3duag.dll BSOD has occured. Any idea what this error might be due to?
5. Due to all these uncertainities, I havent updated tot he latest ATI driver which is 8.593 * and I still have the 8.293* . Will updating to the new one be a problem?
I appreciate any help or guidance you can give me in this matter and I badly need to fix it for my projects.
Thanks
Vishak

I think your best way of diagnosing this is to remove the new ram and install only one chip, if the problem persists, try the other. If the problem persists, then I'd try booting from a Linux LiveCD (any will do but I'd recommend ubuntu.com). boot with the option to not change anything on your PC. If you get this same problem when booting linux, then you know it's a hardware problem, in which case I'd remove as much hardware as possible, drives, cards, etc... if it still persists, then you most likely have a bad system board. In this unfortunate event your best option would be a used one. A new one would cost more then the laptop is worth, but used T60 boards are pretty reasonable, I just found one for another member and could probably help you find one to if necessary, but lets hope it's just a ram chip. And by the way, your system is limited to 3GB, but in the chipset, and in your 32bit OS they came installed with. You can install 4GB, but it won't be able to use it all.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store.

My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?

I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.

Panic message restart grey and black screen

WOONT RE BOOT OR START
Computer froze and after manual power down and restart, grey and black screen appeared with a message to hold powwer button down to power off and then hold power button again to restart. I did and got same screen and message. "PANIC" and "Debugger called: <panic>" message in background.

Hi Fred,
Is this happening for all Flash content or just your website? Can you give us a link so we can take a look? Can you also please post back with your system's configuration report?
Windows Instructions
Mac Instructions
Please check to see if you are using the NPAPI version of the Flash Player plugin in Chrome. Let me know if you need instructions on how to do this. If you are, please try switching back to the PPAPI version to see if that corrects the problem.
I'm moving this post over to the Flash Player beta forum.
Thanks,
Chris

Phone doesn't appear in iTunes and black screen!!

Phone doesn't appear in iTunes and black screen i cant do nothing please help me!!

I read this article.
I can't restore iPod because iPod Updater can't recognize it, when one connect to the computer.
How to solve the problem: as i wrote, iTunes diagnostic informs that can't find the controller IEEE 1394 (WiFi), but I HAVEN'T WiFi card on computer, I use USB 2.0.

Have a 27 imac desktop with mac osx 10.5.8, finally got out of grey and black screens etc. is there anything I can do to prevent all this from happening again when I shut down?

Have a 27 imac desktop with mac osx 10.5.8, finally got out of grey and black screens etc. is there anything I can do to prevent all this from happening again when I shut down? Or before I shutdown? TIA.

Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
     used to manage backups and to restore backups. Time Machine
     requires a backup drive that is at least twice the capacity of the
     drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
1. Cool Drives
2. OWC
3. WiebeTech
4. Firewire Direct
5. California Drives
6. NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

What to do when the apple logo and black screen persist (apple tv)

What to do when the apple logo and black screen persist, when connecting apple tv.

Have you unplugged from the power for 30 secs and retried?
If it constantly still does that it may have become corrupted and you'd need to restore via iTunes:
Restoring your Apple TV - Apple Support

My lumia 720 suddenly stuck and black screen with ...

Hi
My lumia 720 suddenly stuck and black screen with Nokia Symbol is displaying I have tried for soft reset but it doesnt work will someone help me its very urgent
varun

You can try to perform the soft reset again. If this would fail, below hardware key reset combination is what I can suggest. This deletes all the personal content of the phone.
Option 2: Hardware key combination
Use this option if the phone fails to fully switch on when pressing the power on key.
Note: No warning about data loss!
Nokia Lumia with Windows Phone 8
Step 1
Make sure the charger is disconnected.
1. Switch the power Off.
2. Press and hold the Volume down and connect the charger, if succeed an exclamation mark (!) is shown on the screen.
Step 2
Then input the keys in the following order:
1. Volume up
2. Volume down
3. Power
4. Volume down
Step 3
The phone will reset and boot up automatically. Please note that this may take several minutes.

20" imac won't start up-flashes between blank grey screen and black screen

20" imac
2GHz Intel Core 2 Duo
Was running system 10.5.8 just fine. Worked great.
But then I wanted to give the imac to a relative. And so, I tried to boot from the original grey mac install dvd to wipe the hardrive and set the imac back to factory specs.
But it wouldn't boot off the dvd. All It would do at restart was to flash slowly back and forth between blank grey screen and black screen. So, I tried the Leopard update dvd. Same results. So I zapped the pram and tried again. Same results.
If I just pushed the start button tho.. the imac would start right up and run fine. However, I didn't want to give it to someone else with all our information on it.
I finally restarted it and held the "T" key to turn it into a giant firewire drive, hooked it up to our other 20" imac, and used the disk utility from the second imac to erase the drive of the first imac. Then I inserted the grey install dvd into the second imac and selected the drive of the first imac and ran the install process.
Now, the first imac won't start up at all. Just a continual grey screen for a bit, than a couple of buzz sounds in the machine and then the black screen... than back again.
It ran great before I erased the drive and re-installed OS 10.5
What's wrong? How do I get the machine to either boot off the install cd?

So, I've figured out a little more on the first machine. It's a 20" 2.6 GHz Intel Core 2 Duo running 10.5.8.
It ran great. But, I wanted to erase the hard drive and reinstall the OS system before giving it to a relative.
I found that although the optical drive would read and write to normal cds and dvds, the machine would NOT boot from the grey start-up disks I had on hand. ( I have two imacs, and I tried both sets of dvds without success.)
I zapped the PRAM, and used disk utilities via firewire connection from my other 20" imac to check the hardrive and make repairs. Disk Utilities couldn't find any problems. So, using disk utilities from the other imac, I erased the first imac's harddrive and then used the install dvds on the second imac to install the original OS to the hard drive of the first imac.
(looking on the hard drive of the first imac, I can see all the contents)
However, the first machine will not start up. It just switches from grey....to black..... then grey..... and then black again.... over and over
Why won't it boot from the newly installed OS on it's own hard drive?
And Why won't it boot from the original install dvds?
How can I get it to start up again?

I reset my iPod touch, now the logo blinks on and off screen with no response

I reset my iPod touch, now the logo blinks on and off screen with no response

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Blinking light and black screen

Similar Messages

Maybe you are looking for