Blinking red LED

My blackberry is dead, i was updating it and something went wrong and i got an error then it turned off and never turned back on it just keeps blinking red.  I have a 8330 curve from sprint.  Please any help would be nice. 
Solved!
Go to Solution.

This is the best solution!!! I tried it and it worked.
1.  Take out the Battery and plug in your Wall Usb charger to your BB.
2.  Wait for the hour glass to be displayed on the screen.
3.  Re-insert your battery.
4.  The Battery will start charging and everything will work just fine.

Similar Messages

  • Wont turn on /blinking red led

    Hi all, have my xperia z3 for about two weeks, not rooted, not unlocked, without any modifications. Yesterday before sleep it was with more than a half of akku, today as im woke up and got it in my hands it was off, im plugged charging cable, was thinking maybe the battery was drained, but nothing happens still, its just blinking red (led).
    Was trying to hold power + volume up, nothing.
    Reset key near sim dont works for me either - i'm just notice 3x vibrations and thats it, its just repeat vibrate 3x times again and again but nothing happens, no boot.
    Solved!
    Go to Solution.

    You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
    Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
    Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • When I wake up, I have email, but no flashing red LED!

    Last night, I plugged the charger into my 8900, saw the clock displayed, and went to sleep.  When I woke up this morning, I had 4 new emails and 2 text messages, but the LED was still blinking green, not red.  Had I not looked at the 8900's screen, I would not have know there were messages waiting for me.
    I searched the forums on this issue, and came across one post which said exiting the bedside mode by bypassing the clock application's "Exit Bedside Mode" option can cause this.
    All I can think of, is that I might have set it to Bedside Mode (which turns off the LED) and then pressed the MUTE button to put it in standby.  I remember seeing the message dialog box show up saying the phone was entering standby mode, but the message never went away.  I cleared the dialog box by pressing the red End Call button.  I think the phone may also have exited Bedside Mode at that time, or I may have manually exited it via the clock's option.  My guess is that this is what caused the LED not to flash red after receiving messages.  Unfortunately, I've been unable to replicate the error using this method, or any combination thereof.
    Any ideas?

    The blinking red LED blinks ONLY for about 15 minutes after receipt of a message or email. Unless you had received the email and SMS in the 15 minutes prior to your waking, there is no reason your LED should have been blinking.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My z10 led flashing red when charging and even at battery full it blinks red. no green at any note..

    My z10 led flashing red when charging and even at battery full it blinks red. no green at any notification. But at below 10% charging level it blinks with a combination of red and green. Please send me any settings to be changed if.. at full charged no green light is blinking.. how many colours does z10 led have..and when it works and how to make those settings..or was my led not working fine? I am worried so much..plz help me

    Your LED is fine, on the Z10 there is not "network signal available" green LED, as you're accustomed to from the legacy devices. At reaching 10%, the LED will blink orange.
    Red for message or applicaiton notifications.
    if you want to edit and create specific LED color combination, see the third party apps such as BeBuzz or Hub++
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red, what is this? it isn't in the manual

    CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red in a pattern, red off then red red, Our AP isn't working it won't show up on our Cisco WLC 2125 anymore and this is the LED indicators, I've checked in the manual and this combination of LEDs do not exists??

    No cisco web is working perfectly.
    do you have a valid CCO id with smarnet contract ?? then only you can download new IOS for AP:
    Autonomous AP image:
    http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=284180979&release=12.4.25d-JA2&relind=AVAILABLE&rellifecycle=ED&reltype=latest
    LAP AP image:
    http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=280775090&release=12.4.25e-JAP&relind=AVAILABLE&rellifecycle=ED&reltype=latest
    Regards

  • Mx106 red led blinking issue

    What does it mean if the red led of the dynamixel mx 106t keeps blinking... it was running just fine with a baudrate of 36 for 5 minutes... then the problem starts when the motor led starts blinking continuously....

    may be your TA Unit is broken, you must flash a TA  fix with FlashTool so your phone works again, make shure you've got your drivers installed correctly, and you aren't on windows 8.1 RTM/Preview (still not compatible) . Cheers

  • Sony TV KDL-60W840B Red LED is blinking 2 times and TV wont turn on

    Hi, I have a Sony TV KDL-60W840B which I bought 13 months ago for the world cup soccer (gift for my husand). Now it is not working and like you can read in the subject line once the TV is plugged into a power strip the red led start to blink twice and pause, when I try to turn on it not do it. Please help me because it is not fear that just when the warrenty finished the TV is not working,  and in fact I spent $2000 one year ago to have this issue. I really appreciate your help. Ana LuciaAB, Canada.

    Hi aluva,
    Welcome to the Sony Community! 
    If a Red LED is blinking and the TV is not working properly it means that the TV has detected an issue or problem. Most Red LED blink conditions require service. The meaning of the blink codes differs between TV models,
    Please perform reset, visit the website below for the steps and further details. 
    https://ca.en.kb.sony.com/app/answers/detail/a_id/38403/c/65,67/kw/Perform%20power%20reset/session/L3RpbWUvMTQzODYzMjA0Ny9zaWQvQ1pPczkqc20%3D
    Check out the website below for additional troubleshooting steps regarding lights are blinking on the TV.
    https://ca.en.kb.sony.com/app/answers/detail/a_id/32192/c/65,67/?icid=home|banner3_ca_en|blinking%20light
    If these articles do not resolve the issue, the problem is most likely related to an internal component that must be replaced and service will be required. Begin the procedure to send your Sony product into a Sony facility to be repaired.
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Pearl Flip wont load - Red LED blinks twice, nothing on screen

    My Pearl Flip refuses to load, and the only activity it shows is the red LED blinking twice every few seconds. I have tried the following
    -tried reinstalling the two most recent versions of the OS using the Blackberry Desktop Software, but the installation hangs at the point of loading the system software
    -tried using the application loader, however the installation hangs at loading the system software
    -tried to use JL_Cmdr to wipe the device. As far as I can tell it did not wipe it (although it doesn't really provide any errors either)
    EDIT: Should also say Ive tried all the above from multiple computers and using Win7 and XP
    What other methods can I try to restore this device? I appreciate any suggestions that might be out there.
    Thanks!
    Scribs

    Hey Scribs,
    Welcome to the forums!
    Have a look at this article for help reloading the software using loader.exe http://bbry.lv/9fsGPK If this method does not work you can try doing a reset to factory using the switch found in this article http://bbry.lv/dpNb1j
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Red LED won't stop blinking after the phone turns on. Pearl 8100.

    Ok, I have searched and read all over the net to find out about this, but nothing seems to compare.
    My browser suddenly stopped to respond, and the buttons on either side of the trackball stopped responding while in the browser. This happend every time I entered the browser so I did a hard reset. Now the browser wroks fine, but...every time I turn the phone on, as it starts searchig for the network it will start blinking the red LED continuously and it only stops when I receive a call or a msg.
    This obviously can't be right, but I can't find anything that appears to be wrong besides this....any suggestions?

    That is certainly backwards. It should START not stop when you receive message or phone call.
    Do this for fun Options > Screen/Keyboard > LED Coverage Indicator. Turn that off for now and see what happens.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Q10 wont turn on. Red LED 1101111 blinking.

    Hi All,
    Just updated my Q10 to 10.3 via the carrier update and after half a day my phone turned off and now it wont turn back on again.
    When I press the power button the yellow LED comes on and after that the red LED blinks in the following sequence 1101111.
    Tried all the usual tricks. Battery pull, plugged phone in without battery, plugged into blackberry link, used original charger/cable, hold power button down for 10 seconds etc...All don't work.
    Any ideas would be much appriciated 

    Hi and Welcome to the Community!
    I cannot quite tell if you have done exactly this or not...apologies in advance if you have. Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs. If it fails, please try again but increase the wait time in step 4 to 2 hours, and perhaps as long as 4-5 hours.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    It is also possible that the OS update caused this. Due to the number of problems with "upgrading" to this OS level, I suggest you try the very clean and very forceful AutoLoader OS Reload:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
    You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry Z10 led blinks red 5 times

    couple of days ago , i dismised the alarm of my Z10 , after 5 min i noticed led of the phone was blinking red , 5 times .
    can any have the solution for it . i tried reloading the phone , it also didn't worked  ... gave the phone to Blackberry tech guy , according to him its pin is not getting back to Zero , he also tried to clear its cache but of no use , ...
    is there anything that can be done .. to fix it

    Hi deviousdevil and welcome to the BlackBerry Support Community Forums!
    To clarify, since dismissing the alarm, the BlackBerry Z10 LED has not stopped blinking?  Do you have any apps installed which modify the LED notifications?
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • BlackBerry Z10 won't turn on and red led blinks 4 times

    Hi all,
    Yesterday my BlackBerry Z10 suddently turned off, I turned it on again and it worked fine for a few minutes (battery was around 90% full), then it turned off again and I couldn't turn it on anymore! The red led is blinking 4 times with a 3 seconds interval between each 4 blinks sequence. I tried to charge the battery, connect it to the computer, turn it on without the battery (with charger on), with no success. Sometimes, it shows the BlackBerry logo, or even the logo with the % loading, but then it turns off in the middle of the process, on random percentages.
    Does anyone know what happened to the phone and how to solve this issue?
    Thanks!
    V

    Mine keeps turning off... I called them and they told me to send the phone to Blackberry by mail to check what's wrong and that when the phone gets there, they do a complete evaluation and in 30 days they send the phone back... In other words, I have to buy another phone! Blackberry assistance is useless...

  • My Curve 9220 has a black screen and the LED light blinks red every 5 seconds

    The phone won't come on and the light blinks red. I dont know what to do 

    Hi there,
    If you have a good battery or the batttery is good enough then try those steps , it may help :
    ( Credit JSanders )
    1) Make sure you have Blackberry Desktop Manager installed. BlackBerry desktop software
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.  BlackBerry Software Download Site
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    Good luck.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • How can I fix this red blinking SYS LED light?

    I am having problems with the extender losing signal and the GPS turns red and the SYS light is slow blinking red.  I just spent 40 minutes on the phone with a Verizon tech who had me unplug it and just pretty much said "Sorry, there nothing we can do"!!!!  This is happening several times a day for the past 2 weeks. 

    I am having the same problem with a blinking red sys light and red gps light. The system has been working fine for months and without my changing anything at all, it stopped working yesterday. I am using the correct power supply. I have powered off and on the gateway and the extender several times. My zip is 94306 (although Verizon shows my device as nearby Los Altos 94022 where I think the tower might be). I have AT&T Uverse as my ISP with a standard 2wire modem/router gateway 3800HGV-B. My internet speed is 15.39 Mbps down, 1.93 Mbps up (it is speedtest.net not text): http://www.speedtest.net/my-result/3707324666 VoIP test reports 15.1 and 1.92: Speed test statistics --------------------- Download speed: 15132 kbps Upload speed: 1924 kbps Download consistency of service: 93 % Upload consistency of service: 99 % Download test type: socket Upload test type: socket Maximum TCP delay: 54 ms Average download pause: 1 ms Minimum round trip time to server: 24 ms Average round trip time to server: 24 ms Estimated download bandwidth: 15434 kbps Route concurrency: 1.0199696 Download TCP forced idle: 0 % Maximum route speed: 21845 kbps General information ------------------- IP address: 99.108.141.9 Local time: Aug 22, 2014 4:12:39 PM Test server: http://mcssjc.visualware.com/ Thanks for any help, Larry Kaplan

  • My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

    My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

    Either the power brick is damaged, or the charging circuit is on the blink, or both. Either way, a trip to the Apple Store or the Apple Authorized Service Provider is in order, as this ain't no bargain basement toy.
    In the meantime, can attempt an SMC Reset to see if it helps.

Maybe you are looking for