Blinking red light and wont connect to bb desktop?! ! !

i tried the video by hotnoob on youtube..and advice as well on here..
maybe im doing something wrong..
ive held the button(s) ,,
if i could just get it to sync with desktop id be fine
please help thanks!

Read the technical support pages for your router model. There is an article on the blinking power light somewhere. It describes in detail how to load a new firmware to the router using tftp. Try this procedure.
If it fails try to do what I have posted here.

Similar Messages

My shuffle will play for awhile , then blink red lights and then not work?!

hey
so...my ipod shuffle is werid.
I didn't use it for awhile because I couldn't find it ( my fault ;p)
then when I found it , I charged it and it would work fine, then all of a sudden it would blink red on and off really quickly then not work at all! Then I charged it again and it would work fine. That's not normal..is it?
Help please

try restoring it on your computer before using it again

Blackberry Z10 (SLT100-2) won't startup, no blinking red light and isn't recognized by PC

I have been using blackberry z10 which i bought from UK 1.5 years ago which was working fine so far. now, all of a sudden, my handphone's battery drained within 30 min, than started giving 4 short red flashing light within short interval. one of my friend using same model, bought from malaysia, he told me to unplug the battery and connect the device to directly wall charger. After i did that, flashing lights are gone and giving once red light each and every time i connect wall charger with my handphone. now i interchange the baterry wid charged one. it showing no lights even if i push the starting button. I already updated the latest os and using sideloader application named(mobile 1 market).
i now live in malaysia and also i got no receipt for showing this handphone to any BB care centre.
I already watched all the post and tried doing this steps..
http://www.blackberryos.com/blackberry-10-os/37518-how-install-leaked-os-onto-your-blackberry-10-sma...
but my phone got no connection to wallcharger, pc cable even any fully charged battery.
can you guys please help me out!!!

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, then redo it but increase the wait time in step 4 to 2 hours, and perhaps 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sony Xperia M2 flashing Red LED light and wont turn on.

Okay so i have been having this problem for about a week.I tried turning on my phone the other day but it wasnt doing that so i thought maybe it ran out of battery then i let i charge for a couple of hours and left it untouched.When i came back my phone was flashing a red light and the sony logo would apear and my phone would vibrate but then it would shut down again.This has been happening for all week i let it charge overnight but still the same thing happens flashing red and vibrating.Sometimes the light dosent flash and i can turn my phone on for a while but i never know when it could randomly shut down.i tried using the Pc companion program to try and fix it but my phone wont stay on for long enough for it to be able to do that.Any tips on what i could do ? the last thing i wanna do right now is call sony so please if you know any possible way of fixing this let me know

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Have you tried to power on the phone without SIM- and/or SD-card to see if this can help? Otherwise, a software repair via PC Companion would be recommeded:
http://support.sonymobile.com/global-en/tools/pc-companion/
In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it. When you are going to connect the phone, the phone should be completely off. Hold the ON/OFF button + volume up(+) for 10 seconds.

My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail. My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexp

My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
Thanks in advance.

I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
Airport Express is model A1143
And I have tried to connect with iPhone - same same.

I have a Samsung Network Extender, model SCS-2U01, and for the past two weeks, the SYS light has gone from solid blue to a blinking red light, disconnecting me from my business calls. In reading the forums, it was mentioned that Verizon had to reset somet

I have a Samsung Network Extender, model SCS-2U01, and for the past two weeks, the SYS light has gone from solid blue to a blinking red light, disconnecting me from my business calls. In reading the forums, it was mentioned that Verizon had to reset something on their end to fix the issue. Would you be able to confirm if something needs to be reset to fix the issue? Thank you!

First, try the normal stuff: power cycle your modem, router, and NE allowing time for each component to stabilize before turning on the next in sequence modem > router > NE. If necessary, try resetting your modem and router. If it still doesn’t work verify it is listed in MyVerizon and then calling Verizon Wireless Customer Service at (800) 922-0204. Good luck!

Blinking red light of DEATH

Hi guys!
In advance, thanks for your help! So here is my problem and I hope you guys can help a young gal out! I dropped my blackberry and it hasn't worked since. It wont turn on but it will for a few minutes, then will randomly shut off and blink like 2 times in a row in perfect intervals. After it turns off... it will not come back on no matter what. I have tried a different charger and even bought a new battery to put in it... But nothing has changed. Its still the same red light! PLEASE help me... Is there anything I can do that I haven't tried, before taking it to a repair shop and spending a bunch of money for them to tell me they can't fix it?!
THANKS SO MUCH AGAIN!
---Alex <3

This may not work if the drop caused some physical damage, but normally for a black or white screen only, and/or the blinking red light:
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Red light and won't charge

I got my bb 9300 a couple of weeks ago. my problem is that it suddenly shuts off and the led would turn to red light. it won't turn on. I thought it was just battery empty or something so I charge my phone, it them keeps on having red light and then keeps on having this image of no battery or something. It did turn on one time then vibrates hard and then turns off again. After that it won't turn on. just red light, no battery. Please help.

If you tried a wall charger (that previously worked with your shuffle) and computer ports, the most likely cause is a problem on the iPod. At seven months, it may not be the battery (although it sounds like you use it a lot every day), but it sounds like the battery is unable to charge.
Does the iPod still appear in iTunes when you connect it? If it does, you can try doing a Restore using iTunes.
Restoring iPod to factory settings - Apple Support
If the wall charger is something you did not previously try, it's possible that the computer's USB port is not supplying enough power. As a test, shut down (power off) your computer and disconnect all USB devices (including any hubs). You can leave standard keyboard/mouse connected, if used. If the computer is a laptop, connect its power adapter so that it's not running on battery power. Put the shuffle power switch in the OFF position. Start up computer, run iTunes, and connect iPod to a direct USB port on the computer.
At seven months, it is still under warranty.

After upgrade attempt for 8310, device will not restart -- only blinking red light

Problem: I tried to upgrade the device software to 4.5, and now THE DEVICE WILL NOT RESTART AT ALL. Not with a hard reset. Not using the SIM and battery from my 8310 and putting it in hers. Nothing. Just a red light that blinks in a pattern: two quick blinks, then a pause; two quick blinks, then a pause, etc.
Background: This 8310 had vers. 4.2.2 device software, and something like 2.6 on the desktop. I downloaded/upgraded to 4.6 for the desktop and 4.5 for the device from the AT&T site. The Desktop manager prompted me to install the new device software... looking good. After several minutes, I got an "unknown error" message and it stopped the install.Following a support article, I uninstalled reinstalled both updates, but then the problem occurred: no NOTHING happens on the device screen at all, just the blinking red light when the device is plugged in.
The AT&T store tells me this is about the tenth "dead" Curve he's seen in about a week, apparently all occurring when folks have attempted a software updgrade. Any thoughts/help to offer?
Please help!
Solved!
Go to Solution.

Check this instruction:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry

HELP! Double blinking red light

I was in the middle of upgrading the software on my curve 8330, the software stopped doing anything, and now my phone is off and just has a double blinking red light.
I figure its now dead, but how can i fix this using my mac?
I see plenty of instructions on how to load a new OS using a PC, but none for a mac
Any help would be greatly appreciated!

Welcome to the forums
It seems you may have wiped the OS due to the accidental shut down. Try pulling your battery out and reinserting it to see if the phone boots up. If not, see how to restore a bricked blackberry: http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you have a recent backup, you can load it onto the phone once you are done.
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Blinking red light while in docking base

What does this mean? I don't think it is charging because it will do this all night. Used to be just fine. I haven't been able to find any discussion around a slow blinking red light on the Shuffle...it flashes on and off at about .5 Hz
Ideas? Tried it on a bunch of computers and even a wall charger. Is the battery done? (At only 9 months!)

well, i sort of managed to get the shuffle to an apple authorized repair centre here in bangalore,india where they infact had the firmware updated to the latest and since the charge indicator was showing a red, the executive at the shop suggested that the unit was really low on charge and needed a minimum of 4 hours of charging. Upon charging the unit for more than 6 hours or so, the charging indicator still blinks red(when charging). i am able to play songs for the time-being but it seems the green light is totally conked out.
does anyone know of a repair shop of ipod shuffle in india. the apple dealer was saying its best to discard the shuffle when having problems like this since its best to go in for a new shuffle. i do have another shuffle that cant be repaired:(

Red Light Battery Wont Charge

Battery went dead and went to charge it and got red led light and wont charge i've tried everything and it wont charge help please

Hello !
Disconnect your device from the charger .
Now pull out the battery and reinsert it again for the Power Restart.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest their time on this Message anymore.
Thanks

Playbook is dead with a blinking red light

My playbook went dead and does not come back even if I charge it for 24h.
If I push the start bottom a blinking red light come up. I try to re-boot it pushing all bottoms and does not work.
Also I have tried to dowload new software through my laptop but never complete it and get stuck in the middle.
Any idea anyone???
Thanks,

Many others have had this problem - first thing to do is check to make sure your are using the charger that came with your PlayBook. Also check the threads at the top of forum for oft-asked questions. For your convenience here is a link that might help. Good luck.
In the dark and need a sky map?
Discover What's up at App World.
Follow What's up on Facebook

Ipod touch has a white screen with lines on it and wont power off and wont connect to my computer

My ipod has a white screen with line on it and wont turn off and wont connect to my computer . It wont reset or reboot with holding the on off button and home button either any help would be appreciated

http://support.apple.com/kb/TS3281
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

My friend took my ipod touch and did the password now its disabled and wont connect to computer?

my friend took my ipod touch and did the password now its disabled and wont connect to computer?

Colton,
You'll need to connect your iPod to your iTunes library in Recovery Mode and restore it using the instructions in this Apple support document.
http://support.apple.com/kb/HT1808
B-rock

Blinking red light and wont connect to bb desktop?! ! !

Similar Messages

Maybe you are looking for