Blinking Red Light s and start

I have tried for a week now, charging for 24hours with the provided charger but it will not boot. It just blinks with 2 red lights every 5 seconds or so.
I tried puching teh start button for 20 seconds...nothing, also tried puching all the buttons for 20 seconds...nothing.
Help!?

Any Help...?

Similar Messages

  • Blackberry Z10 (SLT100-2) won't startup, no blinking red light and isn't recognized by PC

    I have been using blackberry z10 which i bought from UK 1.5 years ago which was working fine so far. now, all of a sudden, my handphone's battery drained within 30 min, than started giving 4 short red flashing light within short interval. one of my friend using same model, bought from malaysia, he told me to unplug the battery and connect the device to directly wall charger. After i did that, flashing lights are gone and giving once red light each and every time i connect wall charger with my handphone. now i interchange the baterry wid charged one. it showing no lights even if i push the starting button. I already updated the latest os and using sideloader application named(mobile 1 market).
    i now live in malaysia and also i got no receipt for showing this handphone to any BB care centre.
    I already watched all the post and tried doing this steps..
    http://www.blackberryos.com/blackberry-10-os/37518-how-install-leaked-os-onto-your-blackberry-10-sma...
    but my phone got no connection to wallcharger, pc cable even any fully charged battery.
    can you guys please help me out!!!

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs. If it fails, then redo it but increase the wait time in step 4 to 2 hours, and perhaps 4-5 hours.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have a Samsung Network Extender, model SCS-2U01, and for the past two weeks, the SYS light has gone from solid blue to a blinking red light, disconnecting me from my business calls. In reading the forums, it was mentioned that Verizon had to reset somet

    I have a Samsung Network Extender, model SCS-2U01, and for the past two weeks, the SYS light has gone from solid blue to a blinking red light, disconnecting me from my business calls. In reading the forums, it was mentioned that Verizon had to reset something on their end to fix the issue. Would you be able to confirm if something needs to be reset to fix the issue? Thank you!

    First, try the normal stuff: power cycle your modem, router, and NE allowing time for each component to stabilize before turning on the next in sequence modem > router > NE. If necessary, try resetting your modem and router. If it still doesn’t work verify it is listed in MyVerizon and then calling Verizon Wireless Customer Service at (800) 922-0204. Good luck!

  • Playbook is dead with a blinking red light

    My playbook went dead and does not come back even if I charge it for 24h.
    If I push the start bottom a blinking red light come up. I try to re-boot it pushing all bottoms and does not work.
    Also I have tried to dowload new software through my laptop but never complete it and get stuck in the middle.
    Any idea anyone???
    Thanks,

    Many others have had this problem - first thing to do is check to make sure your are using the charger that came with your PlayBook. Also check the threads at the top of forum for oft-asked questions. For your convenience here is a link that might help. Good luck.
    In the dark and need a sky map?
    Discover What's up at App World.
    Follow What's up on Facebook

  • Blinking red light of DEATH

    Hi guys! 
    In advance, thanks for your help!  So here is my problem and I hope you guys can help a young gal out! I dropped my blackberry and it hasn't worked since. It wont turn on but it will for a few minutes, then will randomly shut off and blink like 2 times in a row in perfect intervals. After it turns off... it will not come back on no matter what. I have tried a different charger and even bought a new battery to put in it... But nothing has changed. Its still the same red light! PLEASE help me... Is there anything I can do that I haven't tried,  before taking it to a repair shop and spending a bunch of money for them to tell me they can't fix it?! 
    THANKS SO MUCH AGAIN! 
    ---Alex <3

    This may not work if the drop caused some physical damage, but normally for a black or white screen only, and/or the blinking red light:
    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • After upgrade attempt for 8310, device will not restart -- only blinking red light

    Problem: I tried to upgrade the device software to 4.5, and now THE DEVICE WILL NOT RESTART AT ALL. Not with a hard reset. Not using the SIM and battery from my 8310 and putting it in hers. Nothing. Just a red light that blinks in a pattern: two quick blinks, then a pause; two quick blinks, then a pause, etc.
    Background: This 8310 had vers. 4.2.2 device software, and something like 2.6 on the desktop. I downloaded/upgraded to 4.6 for the desktop and 4.5 for the device from the AT&T site. The Desktop manager prompted me to install the new device software... looking good. After several minutes, I got an "unknown error" message and it stopped the install.Following a support article, I uninstalled reinstalled both updates, but then the problem occurred: no NOTHING happens on the device screen at all, just the blinking red light when the device is plugged in.
    The AT&T store tells me this is about the tenth "dead" Curve he's seen in about a week, apparently all occurring when folks have attempted a software updgrade. Any thoughts/help to offer?
    Please help!
    Solved!
    Go to Solution.

    Check this instruction:
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry

  • HELP! Double blinking red light

    I was in the middle of upgrading the software on my curve 8330, the software stopped doing anything, and now my phone is off and just has a double blinking red light.
    I figure its now dead, but how can i fix this using my mac?
    I see plenty of instructions on how to load a new OS using a PC, but none for a mac
    Any help would be greatly appreciated!

    Welcome to the forums
    It seems you may have wiped the OS due to the accidental shut down. Try pulling your battery out and reinserting it to see if the phone boots up. If not, see how to restore a bricked blackberry: http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    If you have a recent backup, you can load it onto the phone once you are done.
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • Blinking red light while in docking base

    What does this mean? I don't think it is charging because it will do this all night. Used to be just fine. I haven't been able to find any discussion around a slow blinking red light on the Shuffle...it flashes on and off at about .5 Hz
    Ideas? Tried it on a bunch of computers and even a wall charger. Is the battery done? (At only 9 months!)

    well, i sort of managed to get the shuffle to an apple authorized repair centre here in bangalore,india where they infact had the firmware updated to the latest and since the charge indicator was showing a red, the executive at the shop suggested that the unit was really low on charge and needed a minimum of 4 hours of charging. Upon charging the unit for more than 6 hours or so, the charging indicator still blinks red(when charging). i am able to play songs for the time-being but it seems the green light is totally conked out.
    does anyone know of a repair shop of ipod shuffle in india. the apple dealer was saying its best to discard the shuffle when having problems like this since its best to go in for a new shuffle. i do have another shuffle that cant be repaired:(

  • Trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

    trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on help a newbie please
    This question was solved.
    View Solution.

    You can try removing and reseating the memory and see if that works.
    If that doesn't work, remove all but one memory module (if the PC has more than one), and see if the PC runs normally with one memory chip. If it beeps, remove and replace with the memory you removed and keep doing that until you find the bad memory chip.

  • My BB won't turn on the red light flashes and the key's light up

    Hi
    I have read all posts relating to my problem, but one thing my BB won't do is resgister on my computer.  The phone will not turn on, has the red light flashing and the keys light up, but the screen will not come on.  I have tried taking the battery out, charging it all night, all the recommended/ideas from this sight, but no joy.  I have only had this phone since July last year.  I haven't been able to try updating phone etc as it won't register on my or my husbands computer please help
    Louise

    Hi,
    The way you presented it made me think it had just happened.
    So you have had the phone since July has it ever worked?
    Most likely you are missing some or all of your device OS and you'll need to reload the device.
    Because the phone can't generate enough signal you will have to "force detect it". I've attached the link below. If you want to proceed I'll need what version of Device OS and what version of desktop manager software.
    Thanks,
    Bifocals
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB03295 How to verify which version of BlackBerry smartphone software is installed on the computer using BlackBerry Desktop Software
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • HP desktop won't start, red light flashing and beeping, loud fan

    Yesterday it was working just fine. I turned it off for the night and when I tried to turn it on this morning, a red light was flashing and beeping as well as the fan making a loud humming noise. I've read the the beeping and flashing means something. I didn't keep track of the number of flashes and beeps though. After the beeping and flashing I turned the computer off then back on. This time there was no red light, flashing, or beeping. Nothing appeared on the monitor either. After about 10-20 seconds of it being on, the fan started to hum really loudly again.
    It's an HP Compaq dc7900. I've only had it for about 3 months and it was fine up until now.
    Any help? Thanks.

    Hi
    I'v checked the specs for your HP and Acer machines and yes it will be fine to cross over RAM modules they are identical in speed and architecture . Please don't forget the last post about removing the sources of power before you go inside the PC to check RAM . Other thing is if your HP has more than one RAM module remove only one stick first and try to boot . If it still won't boot with that module take that one out and try to boot from the other before you look to swap over modules from Acer machine . Don't forget to re connect your monitor to see if you get display with one / two etc modules . Post me back your findings
    Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • 8700 will not start,red light flashes and hourglass comes on and off

    I have an 8700g Blackberry phone and I mistakenly downloaded an application that is only supported by software version 4.0 or greater. ( my phone had software version 2.2? ) . I had to replace the battery today and when I put in the new battery, it tried to start up but the red light comes on and the hourglass flashes on and off but after two hours it will still not start up. What should I do?

    Kendal wrote:
    Hi there,
    My bb did the same thing, but when i did what you said, the app loader said that there is a fatal error, and that the code is [A:0x0000000E]; and a red light flashes twice in quick succssion on the bb, can you please help me out here? thanks K.P. :-)
    Hi and Welcome to the Community!
    Hmmm...that sounds very bad. But, let's try some things anyway...a total wipe and reload, using one of the following utilities:
    http://forums.crackberry.com/forum-f3/how-wipe-jl_cmder-53502/
    www.bbsak.org
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blinking red light and wont connect to bb desktop?! ! !

    i tried the video by hotnoob on youtube..and advice as well on here.. 
    maybe im doing something wrong..
    ive held the button(s) ,,
    if i could just get it to sync with desktop id be fine
    please help thanks!

    Read the technical support pages for your router model. There is an article on the blinking power light somewhere. It describes in detail how to load a new firmware to the router using tftp. Try this procedure.
    If it fails try to do what I have posted here.

  • My shuffle will play for awhile , then blink red lights and then not work?!

    hey
    so...my ipod shuffle is werid.
    I didn't use it for awhile because I couldn't find it ( my fault ;p)
    then when I found it , I charged it and it would work fine, then all of a sudden it would blink red on and off really quickly then not work at all! Then I charged it again and it would work fine. That's not normal..is it?
    Help please

    try restoring it on your computer before using it again

  • Blackberry Curve 9220 Won't Switch stuck On only red light blinking RED LIGHT! HELP!

    my blackberry is stuck on red light blinking oleas help me no problem if all the data is lost i dont care i want my phone back it hase been 3 -4 weeks . light is blinking until the battery goes down and it wont charge also i have to get the battery charged by other phone plzz help mee........ 

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for