Blinking templates

I'm creating a site using templates.
When I preview the site in Safari or Firefox, the site blinks every time navigating to a different page.
- or actually in Safari it's only the swf animation, inserted in the header as my logo that blinks, the other locked regions of the templates works fine. Previewing in Firefox the whole site blinks.
Anyone got an idea why, and how I solve the problem ?
I'm a mac user, and works in Dw cs3, Safari 4.0.4 and Firefox 5.0

Similar Messages

How can I change a template's color?

I have selected the template called "Flyer" from the Flyers section of the template chooser. I am trying to change the green bar it has on top to a different color, but every time I click on the edge of it, it brings up an I-bar for the cursor to change the text in it. I can't seem to select the green bar to change it's color.
Help!
Ron

Worked like a charm! I was close I think, but I had highlighted the text and it kept leaving green areas at the ends. Just having the cursor blinking in the text field did the job. Awesome Jerry, thanks!
Two additional notes:
1) I had more than one line in this situation, and the solution corrects the one line I had my cursor on. No big deal, I fixed one line, then placed the cursor to the next and did it again.
2) I was using the custom color picker magnifier in the upper left of the color palette to match the new color to another document. I had to close out the palette and do Jerry's suggested procedure again for the next line. It was quick & easy though.
Ron : )

Any Expert idea how to repair BIOS on Envy DV7-7223CL having continuous CapsLock Blinking?

I have a Envy DV7-7223CL laptop (Product no. C2N67UA with AMD A8-4500M cpu and 8GB RAM) running Win8 which was working fine, The day windows was updating the system while the battery was out and it was conected to charger only, Then the power got disconnected and laptop went dead in middle of update!!
When I try to restart the laptop the system stucks in blank screen and can't open the BIOS page or go to BIOS recovery using "Windows+B" combination.
From signs that I see and HP support pages I read and tried I'm almost sure that the BIOS has got corrupted ...
Now the symptoms after powering up: Power button remains ON, Caps-lock LED keeps flashing (Non-Stop continuous), HDD and System Fan running, Blank Screen with absoultely nothing on display.
What I've tried:
1- Disconnecting HDD, ReSeating and removing memory modules, forcing power off by holding power button,
2- Following all steps shown in:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5406925&tmp...
Though I'm 100% sure that I haven't deleted the factory set HP_TOOLS partition on the HDD (The laptop was recently reset to factory settings using Recovery Partition) but still system can't get into BIOS Recovery screen using Win+B
3- As last resort I've been trying to recover BIOS using external USB storage: I downloaded and ran the HP UEFI Support Environment for my laptop (which is sp63599.exe), It Created the folders "BIOSUpdate" & "SystemDiags" folders within "Hewlett-Packard" folder on flash drive with all required files inside, It also creates BIOS folder which has 3 empty folders (Current, New, Previous) inside. I believe these folders should contain the BIOS files that system will read automatically and flash to BIOS.
So I followed the steps in the link below:
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-use-the-HP-BIOS-update-uefi-utility/...
And downloaded the oldest version of BIOS for my laptop (F.13 - sp58982) then extracted the 0182D.BIN file using WinRar out of this file. Then I downloaded the latest version of "phoenixtool250" and fed this 0182D.BIN file to it trying to get out the Decrypted file .dec and signature file .sig, But out of surprize the program tells that the BIN file "is not a Phoenix/Dell/Insyde/EFI BIOS",
So it couldn't proceed and no .sig & .dec file produced!! I tried this program with F.21 & F.23 version of BIOS files for my model but no luck.
I tried this program with .BIN files for other HP models (i.e. DV7-4120er) and it works fine giving the required .sig & .dec files.
So now questions are:
A) Why the system can't recover BIOS fro HP_TOOLS partition on my HDD by using Windows+B combination? Does it mean that partition is currupted too? Or is there any other way to initiate it?
B) How can I get out the .sig & .dec files from the BIOS .BIN files of my model (F.13-sp58982, F21-sp60074, F23-sp63517)? Is there any other program rather than "phoenixtool" to do this? Or is the BIOS chip on this model of HP is completely different brand & type (None of Phoenix/Dell/Insyde/EFI BIOS)?
C) If anyone happen to have this model (DV7-7223CL with HP_TOOLS partition still on their HDD I'll appreciate if could copy & send me the *.BIN & *.SIG files, I think it will solve my problem
Please help me ASAP to solve this problem as I need this laptop for my work, I appreciate feedback and hints that you may have tried or discovered solving this problem.
PS: I tried to copy *.BIN & *.SIG files of "HP DV6-7138us" which I found through a thread to mimic the system and see if it reads the files from USB flash, But nothing happen and I even don't see the USB stick light blink or turn on during boot with Win+B pressed, So does it mean my system doesn't or couldn't even read the USB drive? Or simply it does check the USB drive but ignores it as the *.bin & *.sig files not matching what the system expects to find?

Hi Chien8,
Thanks for thoughts, I've read that article and tried creating the USB BIOS recovery disk,
But the problem as I've explained on item 3 of my above post is that the HP BIOS packages available in HP Support website only includes the *.BIN files, and no *.SIG files as told by many HP Experts that is required for laptop to read the recovery BIOS info from USB stick.
So now the question is how or where to get the *.SIG file for my model!!!
HP's following link only gives general info on using a USB key to recover BIOS, But not accurate details and working details on how to prepare that USB disk!! Because the procedure explained only makes the template of the BIOS disk but doesn't write any BIOS files (*.BIN, *.SIG, etc. ) on the disk:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5312229&tmp...
HP should seriously revise & complete this link

Error while trying to copy template from another application

Hi,
I am getting this error while trying to copy template from another application:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
This report is located here:
Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
best regards,

It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
I would just as a matter of course reset the TC to factory and redo its setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

The cool little features in iWeb templates

Hi all,
I was just wondering how to get the cool little add-ons that the iWeb templates have on my site?
For example, iWeb has scissors on one of the sites. Their are also others like.. doodles, post its, "hello, my name is" I know I can simply cut and paste, but I'm looking for additional add ons. is there a stock pile of these somewhere on the web or maybe on my mac?

You can add scrolling banner text, blinking text, mouse rollover, Fancy Zoom, Show and Hide text and many other enhancements.
OT

Preloader with video template (screens)

http://www.adobe.com/devnet/flash/articles/vidtemplate_corppreso.html
I am using this video template (above); it uses screens.
everything is working great. but i would like to add a preloader. I
have tried moving my keyframes to frame 10 to make room for a
preloader, but I keep getting a blinking screen when i test.
what is the correct way to do this? thank you.

most likely you have components (or other objects) that are
exported for actionscript and loaded before your preloader is
displayed.
to remedy, as pallav implied set export to some frame other
than 1 if you don't need to use any of those components etc in the
first frame.
however, that is not done in your library. click on file,
publish settings, flash, settings and change the export frame for
classes.

Blinking background image in IE

I have a css styled nav menu where the links have a little
background image
to the left of the link copy. In IE, when you mouseover the
link, the image
momentarily disappears and then comes back. In other words it
flickers once
or blinks. Though not a big deal, it's a little annoying.
This doesn't
happen in Firefox or any Mac browsers. Any ideas on how to
stop the
blinking?
Thanks
mark

Mark Morse wrote:
> I have a css styled nav menu where the links have a
little background
> image to the left of the link copy. In IE, when you
mouseover the
> link, the image momentarily disappears and then comes
back. In other
> words it flickers once or blinks. Though not a big deal,
it's a
> little annoying. This doesn't happen in Firefox or any
Mac browsers.
> Any ideas on how to stop the blinking?
I'd say this is due to your cache preferences. IE users with
default
settings do not experience the flickering.
Thierry
Articles and Tutorials:
http://www.TJKDesign.com/go/?0
The perfect FAQ page:
http://www.TJKDesign.com/go/?9
CSS-P Templates:
http://www.TJKDesign.com/go/?1
CSS Tab Menu:
http://www.TJKDesign.com/go/?3

WCS: Endless loading of "Lightweight AP Template Detail"

Hi there
We have WCS running v6.0.181.0 which started to genererate a new feature: if I go to Configure > AP Configuration Templates > Lightweight AP > [any existing or newly-created Template], the system just hangs in the loading-screen (five blue dot's which are blinking like K.I.T.T.). The CPU Usage is on 0%-10%. I tried to reboot the server, but this did not help in any way.
The Server-System should have enough ressources:
Hardware:
Intel Xeon E5320 1.86GHz
3GB RAM (1GB in use! Peaks go up to 1.5GB in use)
20GB free HDD-Space
3GB Pagefile
Software:
MS Windows 2003 R2 (32bit)
Standard Edition
SP2
Any hints on troubleshoot this? I should configure 310 new Access-Points an I don't like doing it one-by-one
Greetings
Chris

Hi Nael,
I've uploaded the logs to your WebEx-Folder.
Just to let you know: I've upgraded the WCS to the newest release 7.0.164, hoping it would provide a cheap solution for the problem. It did not. The behavior is still the same.
Greetings & thanks for your help
Chris

Page blinks when uploaded........?

Hi, i have only started learning anything about webdesign
(dreamweaver)
for three months now. Now i have come across a problem with
my site and i hav no clue.
One of the pages 'blinks' when uploaded>>
http://www.stuntworldactioncamp.com/groupevents.html
Also at first the search-engines found it easily and the page
came up like
6 x on the first Google page, but now nothing
anymore......what happend??
Could someone have a look at it pls?
Karin

Blinks?
The page is built with antique methods not well suited to
today's search
engine requirements. For example -

It's not likely that this will add any SEO value to your
page, since meta
keywords are ignored by the major search engines. Further,
there is no
semantic markup on your page (<h#> tags, particularly)
to give extra
significance to paragraph content. Finally, the titles of the
individual
pages are not built with search engine keywords or phrases in
mind. Perhaps
a read of these will help -
http://www.seomoz.org/articles/search-ranking-factors.php
http://www.dreamweaverresources.com/seo/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"cagney31" <[email protected]> wrote in
message
news:eun0ip$cc6$[email protected]..
> Hi, i have only started learning anything about
webdesign (dreamweaver)
> for three months now. Now i have come across a problem
with my site and i
> hav
> no clue.
> One of the pages 'blinks' when uploaded>>
>
http://www.stuntworldactioncamp.com/groupevents.html
> Also at first the search-engines found it easily and the
page came up like
> 6 x on the first Google page, but now nothing
anymore......what happend??
> Could someone have a look at it pls?
> Karin
>
>

The Heading at the top blinks on and off. When it goes from blue to gray, I cannot type or use my mouse

The top of my screen with Firefox logo blinks blue and gray. When it goes to gray, I cannot type or use mouse...what's happening?

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Check and tell if its working.

And/or if statement in rtf templates.

Hi all,
I'm using XML Publisher 4.5.
I have created a word template file (rtf) for my reports. I need to be able to show some content in the template file by using and and/or if statement.
fx. <?if:doc_type='STANDARD'?> OR <?if:doc_type='DEFAULT'?>
How can I do this?
In advance thank you.
Best regards
Kenneth

Hi D,
Thank you for your answer.
I have seriously thought about that solution; but I don't think it's a smart way to do it.
If i do it like that, i need to copy the whole table and paste it inside the if statements.
I have two xml elements that I need to make the decisions on. POH_PO_TYPE & CP_RELEASE_NUM.
POH_PO_TYPE can be: STANDARD, RELEASE or BLANKET.
CP_RELEASE_NUM can be: '' or N
If POH_PO_TYPE is RELEASE AND CP_RELEASE_NUM is not ''
OR POH_PO_TYPE is STANDARD
OR POH_PO_TYPE is BLANKET AND CP_RELEASE_NUM is ''
THEN show table (which contains the whole PO).
It shall show the content of the PO in any of these cases.
BR Kenneth

How to round numbers in RTF templates?

Hello!
I'm using BI Publisher for Word (Oracle BI Publisher Builder for Word 10.1.3.4.1) to build a template to my BI Publisher report and I want to calculate this:
avg(X)/(avg(Y)-avg(Z)/0.9)
The result should be rounded to 3 places.
I tried:
<?(sum(X) div count(X)) div ((sum(Y) div count(Y)) - (sum(Z) div count(Z)) div 0.9)?>
and I obtained the expected result.
But, when I try to round in this way:
<?xdofx:round((sum(X) div count(X)) div ((sum(Y) div count(Y))-(sum(Z) div count(Z)) div 0.9),3)?>
I obtain 0 when is expected other value.
Can someone help me?

Hi ,
You can select the number format in RTF template .Double click the Form Field select
Type :Number
Number Format :#,##0.000
Thanks.

Relative path for images in RTF templates

Hi everybody!
When I insert an image in a RTF template, I put its path into the web dialog, in order to see correctly the picture when I open the report from the xmlp server, in this way: url:{"http://servername/analytics/res/Images/image.bmp"}
How can I make this path relative, in order to see the images even if the server name changes?
Thanks so!
Francesco

Hi Tim,
I am using BIP 10.1.3.3.2. I am able to access system variable CURRENT_SERVER URL.
Steps:
<?param@begin:CURRENT_SERVER_URL?>
<xsl:value-of select="$ CURRENT_SERVER_URL"/>
CURRENT_SERVER_URL is getting printed in BI Publisher. Value displayed is http://xx4697.xxx.co.in:9704/xmlpserver.
Now we are importing xsl into RTF template. File aaa.xsl is stored at [BIP_Installation_Directory\oc4j_bi\j2ee\home\default-web-app]
We have hardcoded the path for XSL in RTF. The path is <?import: http://xx4697.xxx.co.in:9704/aaa.xsl?>
As we want to set dynamic path we changed hardcoded xsl path to <?import: {$CURRENT_SERVER_URL}/../aaa.xsl?> but it is not working. Sometimes BIP is taking local path of MyDocuments folder and sometimes Desktop path. If I put that XSL file in MyDocuments folder or Desktop, it is working fine. But ideally it should refer [BIP_Installation_Directory\oc4j_bi\j2ee\home\default-web-app] path...
Thanks,
Amit D

Help with math / calculations in RTF templates

Greetings,
I know that there are math capabilities in the templates... I've seen the code samples in the Core Components guide.
What this doesn't tell you is WHERE these things would go in a template. And... that... is my question.
We are just starting to use BIP in conjunction with JDE EnterpriseOne (8.12, tool set 8.97.12). For our first attempt we're creating our template over a new report.
I have a template where I sum two different repeating values (through the normal BI Properties) and place these values in two separate cells in a table. I want to sum the two of these together for a "grand" total.
I've seen the "examples" but they really aren't very helpful. The xsfo, etc. for doing addition is fine, but WHAT are the values to add and WHERE does the code go?
If anyone has done something like this or has experience using the embedded code I would appreciate hearing from you.
Thanks in advance

I see what you are saying about the spaces... but it made no difference... still got the error.
The XML file is too large and convoluted to be pasted here.
With reqards to the following snippet:
COLA = <?sum(current-group()/COLA)?>
COLB = <?sum(current-group()/COLB)?>
Summ== <?sum(current-group()/COLA) + sum(current-group()/COLB)?>
Where does THIS code go?
Here is the error detail:
ConfFile: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config\xdoconfig.xml
Font Dir: C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
Template: C:\Documents and Settings\jdenison\My Documents\BIP Templates\R5642001\R5642001_TEMPLsave.rtf
RTFProcessor setLocale: en-us
FOProcessor setData: C:\Documents and Settings\jdenison\My Documents\BIP Templates\R5642001\R5642001_RICE0001_D081029_T144059683.xml
FOProcessor setLocale: en-us
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
     at RTF2PDF.runRTFto(RTF2PDF.java:629)
     at RTF2PDF.runXDO(RTF2PDF.java:439)
     at RTF2PDF.main(RTF2PDF.java:289)
Caused by: oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'sum'
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:521)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
     ... 15 more

Grouping and Decimal characters in rtf templates.

Hi guys and girls,
I’m really struggling with a problem here regarding the decimal characters for the prices in my output.
I'm using XML Publisher 5.6.3.
My goal is to control the grouping and decimal character from my template.
The numbers in the XML data file can either be 10.000,00 or 10,000.00. The format is handled by the users nls_numeric_characters profile option.
The output of the template shall be based on the locale and not the data generated by Oracle Reports. For example: Reports to US customers shall show the numbers in the following format 10,000.00. Reports to our European customers shall show the numbers in this format 10.000,00.
How can I achieve this in my templates? Can it be achieved at all?
Thank you in advance.
Kenneth Kristoffersen
Edited by: Kenneth_ on May 19, 2009 1:30 AM

Hi,
Thank you for your reply.
The problem is that the report is generating the output based on the users profile option nls_numeric_characters.
I have tried to override the users profile option in the before report trigger without any luck. I can alter selects so the query gets the numbers in the right format but then I would have to go through all queryes and reports which seem a bit wrong? Especially for the standard Oracle reports.
BR Kenneth

Blinking templates

Similar Messages

Maybe you are looking for