Blip sound when using skype in conjunction with ga...

I wonder if you can help me. I play a game called Guildwars and have downloaded the latest version which is Guild Wars 2. The game is good and I use Skype to play with other players around the world. In Guildwar 1 Skype worked wonderfully but in 2 I can play the game with no interferrence solo but when I play with other players I get a continuous bleep sound coming from my computer box. I have moved Hub and anything that could cause interferance even uninstalled and reinstalled skype but the bleep sound is still there when playing with people on skype. I have raised this question with them to see if they have the same problem but they dont, hence the reason for help from skype? before I go further into it. Can anyone help. I have been in contact with my IT guys and they say that there is some sort of interferrance being caused can skype isolate that to prevent this bleeping>
Also on the previous version of Skype I was able to close current conversation with people unfortunately now I have to close down my system to terminate call can you advise about this also.

I wonder if you can help me. I play a game called Guildwars and have downloaded the latest version which is Guild Wars 2. The game is good and I use Skype to play with other players around the world. In Guildwar 1 Skype worked wonderfully but in 2 I can play the game with no interferrence solo but when I play with other players I get a continuous bleep sound coming from my computer box. I have moved Hub and anything that could cause interferance even uninstalled and reinstalled skype but the bleep sound is still there when playing with people on skype. I have raised this question with them to see if they have the same problem but they dont, hence the reason for help from skype? before I go further into it. Can anyone help. I have been in contact with my IT guys and they say that there is some sort of interferrance being caused can skype isolate that to prevent this bleeping>
Also on the previous version of Skype I was able to close current conversation with people unfortunately now I have to close down my system to terminate call can you advise about this also.

Similar Messages

  • When using Skype my IPad sounds like ocean. This is not a problem when I am on FaceTime or using other apps with sound.  Recently updated to newest IOS 7. First there was no sound for Kype and found that had to turn microphone sound on.

    When using Skype my IPad 2 now sounds like the ocean and I can barely here my contact.  This happened recently after IOS7 update. I did turn the microphone on for Skype as it was required after update.  Now my sound is terrible but only a problem when using Skype video call.  It is okay for FaceTime.

    Thank you!  Resetting resolved the issue with terrible sound when trying to use skype.  Sounds much better! 
    I am not sure what all changed when reset was applied to settings --- assume it defaults back to basic settings.  I have no idea what I had customized, so will slowly figure out.  I have noticed several things.  So far I had to add back my wallpaper and reenter password to get back on my wi-fi. 
    At least SKYPE is now audible.

  • When using facetime having difficulty with video, sound is ok.screen says reconnecting.

    When using facetime having difficulty with video.msound is ok. Screen says reconnecting

    There have been numerous reports of FaceTime problems for the last several days and it is unclear what the cause if. Following is one of many discussions of the issue: https://discussions.apple.com/thread/6096640?tstart=120

  • When using Skype with my MBA people can't hear me but I can hear them. Please help!

    When using Skype people cannot hear me but I can hear them. Please help!

    Hello there, Maribelita.
    The following Knowledge Base article has some great steps to work on resolving the exact issue you're describing:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Microphone not working when using skype. Problem i...

    When using skype, my internal mic is not working properly - friend says he cant hear the voice, but can hear other sounds - music on youtube for example. Ive tested microphone on Skype Echo - it was not working at all. I have tested it on Voice recorder - microphone was working properly. Also when I just started using this laptop (3 days ago) i have talked with friend through Skype for about 3 hours, and then he could not hear me annymore suddenly. So something is wrong with skype. Computer advisor suggested me to contact skype support tehnicians. 
    Solved!
    Go to Solution.

    Hi Dudits, Can you please reproduce the issue and provide logs as described in this link https://support.skype.com/en/faq/FA12321/how-do-i-create-log-files under Skype for Windows Desktop and attach it to your post?
    This will help us investigate and solve the problem you are experiencing.
    Thank you

  • Echo detected when using skype software - can anyone help?

    Hi, can anyone help?
    I've detected an echo when using skype software.  This occurs through the computer of the person I'm speaking to, so that when they speak, an echo comes back to them half a second later.  I'm wondering if the speakers and microphone on my laptop are located too close together and the microphone is retransmitting sound from the speakers?  My laptop is an HP mini 110. 
    Is there anything I can alter through my audio settings to stop this happening?
    Any advice is appreciated!

    I have a Mini 110 that performs beautifully with Skype (no echo, etc).  I have two other HP systems that don't do anywhere near as well.  I did tweak the graphics card on mine, which tremendously improved the video.  However...we are talking sound here, so I'll list the settings on my 110 for you to compare to yours:
    I'm sure you already know how to find the settings, but...in Skype, do Tools>Audio Settings
    Microphone:  set at about 45% with Automatically adjust microphone settings checked
    Speakers:  set at about 75% with Automatically adjust speaker settings checked
    Like I said, my Mini is a jewel.  I wish I could say the same for my G60-535DX.

  • I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

    I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.  I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it).  The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

    Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes  with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
             I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

  • New Mac Air's FaceTime HD webcam gets stuck when using Skype

    Hi all,
    I just bought new MacBook Air. I have a problem when I want to video chat with my friends or family on Skype using my FaceTime HD webcam. It gets stuck on a loop after a minute. If I reload it it works for a minute and then it happens again.
    I am not using any other programs at the same time when using Skype such as iPhoto or Photo Booth.
    I do not know if it is a software or hardware problem. Have anyone experienced the same or anyone knows how to fix it?
    Cheers,
    Kip

    Hi Kip - I have been experiencing the same thing here.
    Latest model Macbook Air 13", OSX 10.8.3, Skype 6.3.0.602
    It works for the first time for a few minutes, then it will either freeze or do a continuous half second loop. turning video off then on will work for a minute or two, then it will go into the loop again.
    I have searched the skype forums and found all sorts of weird suggestions to uninstall, re-install certain versions, delete stuff out off application folders etc, but nothing to reliably fix the issue.
    heres the main thread: http://community.skype.com/t5/Mac/Video-Calls-Glitching-Since-Mac-OS-X-10-8-3-an d-Skype-6-3/td-p/1492372/page/2
    heres the thread they think and older version of skype works for some people:
    http://community.skype.com/t5/Mac/Video-freeze-on-Macbook-Pro-Retina-iSight-v6-3 -0-582/m-p/1489550/highlight/true#M24627
    It looks to definately be a skype issue from the forums there, and its just a wait now till Skype can sort it out unfortunately.

  • I have a new time capsule, want to use it in conjunction with iMac G5 and MacBook; laptop runs Snow Leopard  but G5 can't install Snow Leopard, is stuck at OS 10.4.11.  Am I doomed?  Can anyone advise me?  Thanks..

    I have a new Time Capsule, want to  use it in conjunction with an iMac G5 and a MacBook.  MacBook runs Snow Leopard, but G5 (lacking Intel processor) can't install Snow Leopard, is stuck at OS 10.4.11.  Am I doomed?  Will appreciate any advice.  Thanks.

    you should still be able to get a copy of Mac OS X 10.5 (Leopard), which should run on your G5.

  • My Apple TV lacking sound when using iplayer etc

    Can get sound when using Airplay from some web sources but not others. Any reasons why?
    Nick

    Hmm, rebooted the mac and now works! had only tried rebooting Apple Tv before. strange, as sound was fine on mac when not using airplay
    thanks all
    Nick

  • LabView (8.2) hangs when using I/O operations with traditiona​l NI-DAQ 7.4.4 after aborting LabView program

    Hello!
    We have the following problem:
    LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program
    We freshly installed LabView 8.2 (2006) and NI-DAQ 7.4.4 on a PC running Windows XP (Service Pack 3). We built a larger vi that remotely controls a traditional NI-DAQ card (AT-AO-10) on a second PC via NI-VISA 5.0.3. We were successfully running this program until a power failure caused the first computer to crash. After this crash we were unable to start the program again: LabView freezes while loading the vi. LabView itself can be started but freezes when adding I/O operations from the NI-DAQ palette to a block diagram.
    We have tried to re-install NI-DAQ 7.4.4, but it did not help. We then re-installed all NI software, but still no improvement. In the end we decided to reinstall ALL software, first Windows XP, then LabView and finally NI-DAQ 7.4.4. This worked. However, after a few days of running the program we had to abort LabView via Windows Task manager and afterward we again experienced the same problem as before: LabView freezes when loading the program.
    Obviously, we cannot afford to reinstall Windows every time. Are there any known Windows XP / NI-DAQ issues that might cause the freezing of LabView? We would be very grateful for any idea.
    Best regards,
    Matthias

    Hello Sprice,
    Browse the shipping examples according to “Directory Structure” and then select
    DAQ to find the Traditional DAQ examples. 
    There a lot of examples that are written for counters (Counter >>
    daq-stc.llb >> Count Edges (DAQ-STC).vi). 
    What kind of signals are your photons creating?  Are they TTL compatible at a certain
    frequency?  You don’t care about overwriting
    your buffer?
    Respectfully,
    Rob F
    Test Engineer
    Condition Measurements
    National Instruments

  • How do I stop system sounds when using AirPlay on my MacBook Pro?

    Hi all,
    Probably a quick question, but I'm fairly new to Macs. I've a Macbook Pro 13 Late 2011 and now I've got an Apple TV, I use AirPlay. But how do I stop system sounds when using AirPlay?
    Many thanks in advance, Jon.

    Open AirPort Utility located in HD > Applications > Utilities
    From the AirPort Utility menu bar click AirPort Utility > Preferences
    Deselect:   Monitor AirPort base stations for problems

  • How to numberformat when using sql:query alogn with c:forEach JSTL tags

    Is there anyway to format the numeric values returned from the database when using <sql:query> alogn with <c:forEach> tags
    Here is my jsp code
    <sql:query..../>
    <c:forEach var="row" items="${queryResults.rows}">
    <tr>
    <td><c:out value="${row.COL1}" /></td>
    <td><c:out value="${row.COL2}" /></td>
    </tr>
    </c:forEach>
    Col1 values are numeric without any formats Eg: 1000, 10000, 1000000 etc.
    how can i format them to 1,000 , 10,1000 , 100,000 etc

    It is polite to mention what your answer was. These posts are not just here for you to ask questions, but to be used as a resource for other people to find answers. Saying "I solved it" with no details helps noone.
    I presume you discovered the JSTL <fmt:formatNumber> tag?

  • How do I have my phone Make sound when using "Find my phone" app

    How do I have my iPhone make sound when using "find my. Phon" app?

    You can have the app send you an email when it is found, and you can set your email tone under settings-> sounds

  • When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

    When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!

    Hi,
       If you choose the incorrect settings for printing, yes - the print quality will be affected.
    Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings.

Maybe you are looking for