Block 921 storage type from allowing negative values

Dear all,
i am administrating mySAP and i have a problem that the users have to do bin to bin transfer using the code LT01 which will allow them to post from storage type 921 and leaving the quantity in negative i tried to block the hole storage type for the users but they also need to use the code LT10 for processing storage location transfer now i am stuck can someone give a work around for bin to bin transfer other than LT01 or how to block storage type 921 from allowing negative values to be posted
thanks

Dear Ibrahim,
Pls chect the blocking reasons:
Path:- Logistics Execution - Warehouse Management - Master Data - Storage Bins - Define Blocking Reasons
With regards,
B.Ravindranath

Similar Messages

Conditions type of category "Delivery Costs"(B) donu00B4t allow negative values

Hello,
I would like to know if it is possible to munipulate a condition type with category "B" Delivery costs in such a way that it allows a negative entry in the Purchase Order.
Estandard SAP does not allow it. Message: 06259 "Negative Delivery costs are not allowed".
If the above is not possible, can anyone tell me how a can manipulate a Discount (fixed amount) in such a way that it not only points at a particlar account (accruels indicator does this job) upon MIGO, but also apears as a line-item upon receiving the invoice (MIRO). As far as I know, only Planned delivery costs can do this job. But they do not allow negative values!
If anyone has encountered a similar task, please tell me how they solved it.
Thanks,
Aart

Hello Guys,
The scenario isas follows.
When one buys fuel, in Chile one has to pay fuel especific Taxes.
Version especific config does not resolve this because we need the tax in amount (value) not in percentage.
In our system we resolved this by creating a material "Fuel especific Taxes" which points at a tax-account with a special tax-indicator.
So far so good.
Now the government implemented a second fuel tax - "Fuel tax variable" which we might resolve in the same way, but the problem is this tax might be negative(!).
We cannot create a material with a "negative value" in our Purchase Order and discount conditions have inmediate efect on the material costs in the PO.
The ideal would be incorporate a condition type in the PO which upon invoicing (MIRO) shows up with the tax account (and a possible negative value!
The model we have developed upto now is using the tabpage "GeneralAccount" in the MIRO but in this model we have to indicate the account ourselves. The system does not propose it.
Thats why I thought of the "Planned Delivery costs" option.
Hope this clarifies a bit more the case we have.
Thanks for any feedback
Aart

How to exclude stock of a particular storage type from collective availabil

How to exclude stock of a particular storage type from collective availability check in MDVP.

you can set the storage location as 'Storage location stock excluded from MRP' value '1' in the field
Sloc MRP indicator , in MRP view $ when you enter a storage location accessing the material master.
Thsi is the only way to exclude the storage location, you have to do it per each material and also it is excluded from the MRP.
With this option the stock is not considered in ATP.
IF you need the storage location in the MRP, then you should consider the use of MRP Areas.
With the MRP Areas you define which plants/storage locations belong to each MRP area and the ATP is performed for eah area with the stocks that exist in each of them.
Please if the issue is solved set the thread as answered and provide the points to the useful replies.
thanks for your cooperation

Query to see Material movements in MM (MSEG) + storage type from WM (LTAP)

Hallo,
I tried transaction MCLH, but the transaction gives to informations. I think that the infosystem is not completely builded up.
So I have do create a new Z-Report to get the an query so see Material movements in MM (MSEG) with the
storage type from WM (LTAP). But I don`t know how to get the relations between those tables MSEG and ltap. But I need to know which storage type belongs to which movement in MM. Is that possible?

LTAP is Transfer Order item table while LTAK is the header table. You can get movement type (both IM and WM) and material document number from LTAK table.

Unable to uncheck "Allowed negative values" in depreciation area after post

Hi Friends
I have issue with AUC negative opening Balances and the details are below
I have some AUCs with negative opening balances and trying to settle to Assets
I selected the check mark " Allow negative values" in depreciation area and settled the amount
After that i want to uncheck but the system is not allowing me to uncheck
please help me in this issue
Thanks in Advance
Sreenivas

Hi,
Check OABN transaction and change the settings to the dep. area.
Regards,
Eli

Block stuctue & storage type search

Hi all,
1. In case storage type (SUT managed ) with bulk structutre for e. g.
For tote the block structure is defined as 12*6=72
For pallate its defined as 2 * 1 = 2
Now ,
Does the system allow Keeping the tote of 72 SUT & also keeping the pallate of 2 at same time ?
If above scenario is not possible.
Is it possible to keep single pallate 1 & in remaining space 36 totes.
2. I have defined three storage type for the search strategy st1,st2,st3.
but even the empty storage bin is available in the st1 while creating TO its taking st3.
What could be the resons?

Hi dev,
Can you please explain how did you solve this issue?
Regards,
Prakash

IM block at storage type level

hi Expert,
is it possible to exclude one specific storage type out of ATP check in customizing?
if not, what is the tcode for block all the stock in this storage type in IM (or WM simultaneously)?
Thanks!
HHH

Check
how to exclude Q-stock out of ATP?

Blocking the Storage Locations from Delivery

Hi
We have maintained for a plant different Storage locations like FG-Store,PRD-Store,WIP-Store etc
If the same material exist in the FG-Store ,PRD-Store
Can i restrict the Delivery to Happen only from FG Store & not from PRD-Store ?
What is the config required for it?
Regards
AK
Edited by: Ajithk on Jun 15, 2010 1:46 PM

Hi,
Please check the path
SPRO-->MATERIAL MANAGEMENT->INVENTORY MANAGEMENT & PHYSICAL INVENTORY-->AUTHORISATION MANAGEMENT->AUTHORISATION CHECK FOR THE STORAGE LOCATION
In that choose your plant and storage location and activate the AUTHORISATION
and it maintain the authorisation profiles for the object M_MSEG_LGO and you can't create a goods mvoement from this storage location.
Please try this and revert
regards,
santosh

How to Enable USB Internet Dongles and only Block USB storage device from Group Policy

Hi ,
I have a very urgent requirement , Is there a way to disable the USB and only enable to Internet Dongle using Group policy.
Regards,
Schan.

Hi,
Checkout the below link for restricting the access for USB devices using Group Policy,
http://www.windowsecurity.com/articles-tutorials/authentication_and_encryption/Control-USB-Devices-Group-Policy.html
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/en-US/89c8a8f0-da98-4cc9-8044-1e457e26840e/how-to-disable-usb-internet-dongle-datacard-from-group-policy-server-2008-r2?forum=winserverGP
Regards,
Gopi
www.jijitechnologies.com

Negative values for Custom field in SAP coding block !

Hi All,
Hope all of you are doing fine.
I need your valuable suggestion/possible workaround for the following requirement.
u2022 The project requires me to add a custom new field to SAP coding block, which can take negative numeric values.
u2022 The standard u201Caddition of custom fieldu201D configuration allows me to have the data type of the newly added custom field as either NUMC or CHAR. NUMC data type does not allow negative values. Standard configuration does not allow me to choose other data types (for custom field addition) like QUAN which can allow negative values (by checking the Sign at domain level in data type).
u2022 Moreover, once I have added the custom field, itu2019s not possible to change the data type of the newly added field (say from NUMC to QUAN).
I wanted to know if anyone of you have any project experience/knowledge about possible workaround, where we can add a custom field in SAP coding block, which can accept negative numeric values (through standard configuration or otherwise).

No experience on that, but I strongly advise you to not trying to do something else than what was designed by SAP. So, you can create a character type field, with for example a field exit (though this technology is obsolete, it's very useful in that case) to validate its content (and reformat it if needed).
Note that from a functional perspective, I think an amount is strange in the coding block, so maybe ask the functional people to know why they need it...

Negative values should not be allowed for fields

Hello Gurus,
I have a table and right now the feilds f1 and f2 are allowing negative values to be stored as they are of type char4, now that i dont want those feilds to allow negative values. i am using these feilds in the feild catalog in the ALV as a result when the coloumn is editable, the user may enter negative values, which i dont wnat to allow it now. what will be hte best possible solution.
thanks in advance

Hello,
You can set this in the domain itself.
Please check this SAP documentation:
Output with sign: If fields that refer to this domain can contain negative values, the Sign flag must be set. When the field contents are output to the screen, the first output location is reserved for a sign. If the flag is not set but the field contains negative values, problems could occur when outputting to the screen. Entries can only made in this field for data types DEC, FLTP, QUAN and CURR.
BR,
SUhas

ID Point for Storage Type V.S. Value in Storage Type Search Table.

I am trying to perform a GR without PO (MVT 501) for material ABC into Plant 1000, Warehouse number 100, Storage Location 0100.
During creation of Transport Order, the Destinated Storage Type appeared
is 011 (ID point for st.ty.010). However, the desired Destinated Storage Type should be 015 (High Rack) instead of 011.
I have checked the following configuration:
1. At the SPRO->LE->WM->Master Data->Define Storage Type, the value set for Field: Assigned ID (Identification point) for storage type under the Stock Placement Control = 011 (ID point for st.ty.010).
2. At the Storage Type Search Strategy, 015 is put as the first Storage Type, followed by Storage Type 001 (high Rack Storage)
3. And I found out that using LX03 (Bin Status Report) that there is no
Storage Bin created for the combination of the following
Plant 1000, WN 100, SLOC 0100, Storage Type 015, Storage Section 001
Since we do not have any Storage Bin created for Storage Type 015, it will display 011 as the destinated storage type during TO creation.
My question
After I have manually created a Storage Bin 03-01-01 for storage type 015, during the TO Creation, system still suggests 011 as Destinated Storage Type instead of the 015 I put in the 1st column of the Storate Type Search.
I already have the Storage Bin created for Storage Type 015, why the system still fails to pick it but suggests 011 from Assigned ID (Identification point) for storage type.

Dear Karthik
You are right, I did activated Indicator: Activate Storage Unit Type Check for Stock Placement in SPRO->LE->WM->Master Data->Define Storage Type
The Indicator: Storage type with storage unit management was also ticked automatically by system when I selected Indicator: Activate Storaget Unit Type Check for Stock Placement.
Are you trying to say the ID Port defined in Storage Type will have higher priority over the Storage Type value I maintained in the Storage Type Search Table?
I have already maintained the Storage Bin and I still do not understand why system still go for ID port. As far as I know, system will suggest the Storage Type from ID Port ONLY if storage bin in this storage type as their destination are not maintained in first in the other setting.
Quoted from SAP HELP
Identification point for storage type
Identification point (storage type) of the current storage type.
All goods movements that do not have a specific storage bin in this storage type as their destination are first directed to the identification point.
Here the goods are identified and a transfer order is generated for the actual transfer of the goods into the storage type concerned.
Please help.
Edited by: Daimos on Nov 4, 2011 3:25 AM

Transfer material from Storage location to Storage type.

Hello,
At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
Client want to differentiate these two samples, so we have created two storage types.
Now My question is " can we transfer the samples in different storage types from Storage location.
This is the QM and WM integration.
Please advice
Thanks in advance.
Regards
Anil

Hello Anil
I don't think you can transfer from storage location to storage type.
If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
If you want you may also set up 2 different physical sample locations: That would be ideal.
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
On the application side you may use the sample management procedures to deal with samples. See the following link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
Does that work? Let me know.

TO split from one customer return delivery based on storage type

Hello,
How TO can be split from one customer return delivery based on storage type?
For example,
If I have 3 storage type, ST1, ST2, ST3 then and how can I divide the items in to three different TOs of respective storage types from one customer return delivery? Can I use u201Ccontrol for performance data configuration? If yes then provide detail steps.
Thanks,
Milind

Hello,
Any thoughts/ideas?
Thanks
Milind

Storage type block

Hello all,
i would like to know whether we can block a storage type.
If we block a storage bin, will the MRP in the system consider the material in the blocked bin as a blocked one or will the system consider the material in the blocked bon as good one.
pl. advise.
Thanks,
Maxx

hi maxx,
i think we should clarify two different block ways, that is IM block and WM block.
If you just use ls02n, ls06 or ls07, etc, to block the bin or quant, this is just on WM level, which just blocks putaway or/and removal but the available qty in IM remains unblocked (just like "good one" as you said).
If want to block the qty in IM, you can use mvt 344 to do it so that the unrestricted qty will be reduced but this blocked qty never refer to one certain specifed bin.
If you want to block both in IM and WM, just to use LQ02 to get it.
hope this helps.

Block 921 storage type from allowing negative values

Similar Messages

Maybe you are looking for