BLOCK A SALES DOCUMENT TYPE
HI FRIENDS,
WE WANT TO BLOCK PERTICULAR DOCUMENT TYPE FOR A SALES AREA FOR PERTICULAR PERIOD. IS THERE ANY SETINGS? PLEASE CONFIRM, IT'S URGENT.
KAUSHIK
Hello,
you vcan assign sales area to the document type.
Please go into the customizing the following menu path:
> PRO
> Sales and Distribution
> Sales Document
> Sales Document Header
> Assign Sales Area To Sales Document Types
Assign Sales Area To Sales Document Types
In this menu option, you allocate the allowed order types to each sales area group.
You do not need to make any entries at all if all the sales order types are allowed for each of your sales areas.
If you wish to check allowed sales document types, you must set up common sales areas. This means you must define common sales organizations, common distribution channels and common divisions. If, for example, you have define common divisions, then you must also define common distribution channels and sales organizations.
Example 1 (simplest case):
Only the sales document type "standard order" (OR) should be allowed for a specific sales area <0001/01/01> (that means: sales organization 0001, distribution channel 01, division 01). The following activities are required for this:
1.1) Activity "group together sales organizations":
Sales org. Ref.sales org.
0001 0001
1.2) Activity "group together distribution channel":
Sales org. Distr.ch. Distr.ch. Doc.type
0001 01 01
1.3) Activity "group together divisions":
Sales org. Division Division Doc.type
0001 01 01
1.4) Activity "assign allowed order types to sales areas":
Ref.sales Distr.ch. Division Sales doc.type
0001 01 01 OR
Example 2:
The above settings should also be used for the sales area
I hope that the information are helpful.
Regards
Claudia
Edited by: Claudia Neudeck on Jul 23, 2008 3:47 PM
Similar Messages
-
Delivery block in Sales document type
Hi All,
Can you please explain the usage of the delivery block field available in Sales document type customization under the Scheduling Agreement Tab with an example.
Please let me know on where the "tolerance" described in the F1 help is defined or controlled?
Thanks & Regards
ilangoHi Ilango,
I could not find the "tolerance" described by you. Please read:
Delivery block (document header)
Indicates if an entire sales document (a sales order, for example) is blocked for delivery.
Procedure
The system can propose the delivery block indicator according to sales document type. You can also enter a block manually in the header. A block in the header applies to the entire document. If you want to block one or more specific items, you can enter the block at item level.
The delivery block at header level is only effective if this block is assigned to the corresponding delivery type in the Customzing table (TVLSP). Regardless of the settings in Customizing, the delivery block is always effective at schedule line level.
Example
You can block delivery automatically for certain sales document types (for example, free of charge deliveries) where it is important that someone checks the details before shipping takes place.
Dependencies
If you use a credit limit check, the system can automatically block delivery. You can change this block. However, as soon as you change any of the values in the sales document, the system automatically reapplies the delivery block.
So, in abstract, the whole document will be blocked, depending of this customization.
Regards
Ruy Castro -
Block Sales Document type for a set of customers
Hi,
I have to block the processing of particular sales document type, say XX or a scheduling agreement for a specific set of customers. Can anyone suggest me some inputs on this.
Thanks in advance
SureshThanks all for quick response.
1. By blocking the sales document type by setting the block in VOV8 will not allow u to process that particular sales document type at all.. ie for all customers..But my problem is to block, say ZCAL for particular set of customers only..say customer 1234 of sales org 0001, customer 2132 of sales org 0001, customer 1315 of sales org 0002 etc..Apart from these setof customers, it should be able to process the document type for other customers.
2. By blocking the customer in VD05, it will block the customer for all sales operations. But i dont want to block the same customer for other sales document types.. Say, it should be blocked for ZCAL but not for all document types.
My requirement:
When we create an scheduling agreement, we give the sales area in the initial screen and enter. Then we give the Sold to party.Here it should check whether the customer entered is in the list of customers blocked for scheduling agreement. If so, it should pop up an error message stating" you cannot process scheduling agreement for customer X" If not, it should allow further processing.
I will try with the suggested User exit.
Please suggest if u have got any more ideas.
Thanks
Suresh -
Billing block for customer for sales document type OR
Hi
I want to block a customer for a particular sales document type OR
How to do it?
RegardsHi Nikhil
There is a field called "Check Partner Auth.", but it is necessary to create the order from a contract. This field is in sales document customizing VOV8.
SAP Documentation:
Check partner authorizations
This check determines whether a partner is authorized to release against a contract.
Procedure
Here you can specify whether the check is to be performed against the partners in the contract or the partners in the customer hierarchy. If you do not want the check to be performed, leave the field blank.
When you create a release order for a contract, the system determines whether a partner is authorized to release against the contract. The check is performed at header level. Depending on the rule you enter in this field, the system checks against one of the following:
Partners in the contract
If the partner has the partner function AG (sold-to party) or AA (sold-to party authorized to release) in the contract, the system accepts the partner as the sold-to party for the release order.
Partners in the hierarchy
If the sold-to party of the contract is at a higher level in the customer hierarchy to the partner who wants to release against the contract, the system accepts the partner as the sold-to party for the release order.
Note
If you create a contract with reference to another contract, the system does not run a check and it copies all the partners created in the target contract. If you do not want it to do this, use copying control in Customizing to change it.
Regards.
Mikel -
Sales Document Type blocked for customer
Good afternoon!
Is there anyway I could block a sales doc type for a particular customer?
Adriano CardosoHi,
If you want to block for all sales order types for a customer, then you can do it using T.code VD05.
If you want to block only one sales order type (rest must allowed), then you need to use user-exit USEREXIT_SAVE_DOCUMENT_PREPARE in include MV45AFZZ.
Regards, -
How to block a Billing Document Type?
Hi forum
I need to block the billing document type FV-Invoice Contract.
Is there some configuration to do that? I found VOFA where you can change billings documents, but I cant find how to block it.
Thanks for your support.If I am correct, go to IMG Sales and Distribution --> Billing --> Billing document --> Define Blocking reasons --> Aassign blocking reasons to billing types.
Right now I dont have access to SAP and hence not sure on the path.
thanks
G. Lakshmipathi -
Block material sales order type
possible to block a material against a specific sales order type?
ie material XYZ can be processed for order type OR but not order type XYHi,
Try to incorporate with Listing/Exclusion procedure for your requirement.
first create an access sequence with only "sales document type"
and maintain desired material you want to exclude in VB01.
Thanks,
Krishna. -
Customer should be blocked only one document type ?
Dear
how to block some customers only for some sales document types
ex: customers 1000,10005,1006,1007
now i have sales document types .. ZSOR ,ZSOZ, ,ZSOOZ
Now 1006 customer should not be allowed to create ZSOOZ Order but he can create all document types
Any possibility is there in sapIt can be done with standard system itself--Here i don't want disagree with other members.
Have you tried with option called--Define & assign blocking reasons to sales document types.
IMG→SD→Sales→Sales Documents→Define & assign blocking reasons.
1.Create one Blocking reason(X) ,
2.Assign this-X, to all your sales document types(OR)
3.Now you assign this Blocking reason to the customer(A),whom you want to block.
4.When you try with A with OR--system will blocks.
5.For other customers(B,C,D....) will be allowed with OR.
Hope this helps.
Phanikumar -
Crystal Report - multiple sales document types
In XLR, I can easily drag 'DocNum', 'DocDate', 'Sales Doc Type' fields and specify the filter to show sales doc type equal to A/R invoice and A/R credit memo. It neatly shows various types of sales documents and display them in rows.
In crystal, I have to drag the 'DocNum', 'DocDate' fields for A/R Invoice, A/R credit memo individually under different columns. Is there a way I can dispaly mixed sales document types in rows? Thanks.Hi,
In XLR, you get the data from JDT1 table. You can do the same for CR.
Thanks,
Gordon -
Immediate Transfer Order Creation not occuring for Sales Document Type
Hello gurus,
I have a situation where a transfer order is not being created immediately for a specific sales document type.
Here is an example document flow of a desired scenario where the system is working:
Sales document type: ZOR
> Delivery type: LF
> WMS transfer order
The Item Category in this scenario is TAN.
Here is an example of the document flow in the current scenario where the system is not working:
Sales document type: ZPRD
> Delivery type: LF
The Item Category is also TAN in this scenario. The only identifiable difference in these scenarios is the sales document type. For the ZOR SaTY, a Transfer Order prints immediately once the delivery is created. For the ZPRD SaTY, a Transfer Order needs to be manually created after delivery creation.
Is there a configuration setting that is controlling this? Any help would be greatly appreciated.Thank you very much for the link. When I insert the WMTA output type in the delivery output header, the Transfer Order is automatically created.
The problem I'm running into now is the configuration setting that controls this. I thought I figured it out when going to this IMG path:
SAP Customizing Implementation Guide --> Logistics Execution --> Shipping --> Basic Shipping Functions --> Output Control --> Define Print Parameters Shipping
When selecting the Delivery Note, the shipping point I was using was not configured in this location. I added the shipping point into this transaction, saved, and created a new order & delivery. However, the WMTA output type still was not automatically inserted into the delivery when saving. Is there another location I should be looking to fix this so that when I enter an order with a particular Shipping Point, the WMTA output type automatically appears in the delivery? -
Two different billing document types for 1 sales document type.
Hi Gurus,
I have a requirement , wherein our client is having counter sale.
He is using one sales doc type , and while creating a order , he is manually adding payment terms.
Requirement is , if the payment terms are cash, billing doc type created later on should be one , else during credit sales , billing document type should be different.
As per my understanding this is not possible.
Want to know if anyone has some different thought on this.
Thanks in advance
Nilesh.Dear Nilesh,
There two options you can look in to
One option is
1.You can define different sales document types for cash and credit.
2. You can define two different billing documents.
3.Do the copy control settings for each combination
Cash sales order >Delivery>Cash invoice
Credit sales order >Delivery>Credit invoice
Second option is
1. You can maintain single sales document for both the processes.
2.Define two different billing types then do the copy control settings for both billing types.
But in this option user need to select the billing type manually based on the process while creating billing document.
I hope this will help you,
Regards,
Murali. -
Sales document type restriction to create sales order
Hi Frinds,
My client has one requirement ...they have different sales document type. For sales document type free of charge delivery they want only some authorised person should be able to create sales order. Is it possible to set the authorisation to create sales order according to sales document type.
Regards
SVYes,
As already suggested, it is very well possible to restrict the user for the use of certain sales document type from basis.
& to add to the above,
Create Z* table with Sales Org + Doc type = UserID.
call this table in VA01 transaction & write piece of coding , if current USerID have entry in this table with the said combination - should not allow to proceed further.
without any basis involvement also you can ahieve your requirement.
Note: Sales Org is used for validation purpose only.
Regards,
Reazuddin MD -
What are the img setting to be fullfilled while copy the Sales document typ
Hi What are the setting to be fullfilled while copy the sales document type and item category.
Note: I have already copied, but unable do the PGI(Post goods issue), and Billing.
Thanks
PrasannaHi
Answer for this Question.
we have set the copy control for sales order type and delivery and billing
Regards
Prasanna R -
What is the need of creating partner functions for sales document type.
Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruruThere are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta -
Issue With Sales Document Type in BW.
Dear Experts,
I am facing an Issue with Sales Document Type(Object name is 0DOC_TYPE).
when i am loading data from R/3 to BW It is converting Sales Document type as follow
Sales Document Type in R/3 Sales Document Type in BW
OR TA
CR G2
DR L2
I check with an ABAPer and he told that there is conversion exit for this Object so that's why it is converting when sending to BW. But the user wants to see in Report same as it is in R/3 like OR, CR DR ... etc.
I have done some investigation and found that the conversion exit (CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) are converting the values based in the table TAUUM
The staructure of TAUUM is
MANDT(Client) SPRAS(Language) AUART(Sales document type (not converted) AUART_SPR(Language key for sales document type)
and values are
100 E TA OR
100 E G2 CR
etc....
The same Conversion exits(CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) and table TAUUM are available in BW as well. So i thought I can Use InfoObject 0DOC_TYPE by changing it's conversion Routine as AUART(which runs based on the above mentioned conversion exits).
but the the problem is table TAUUM(Pool Table) does't have any data in BW.
So can anyone tell me is there any option to load data into table TAUUM from R/3 or any other option to solve this issue.
Your ideas will really help's me.
Thanks in advance,
Dara.Hi Venkat,
Thanks a lot for your immediate response.
The InfoObject 0DOC_TYPE was without conversion exit by default. but when data coming from R/3 it is converting and sending to BW So that's why i am planning to use conversion exit "AUART" in the info Object.
I checked data in R/3 using RSA3 it is showing sales document type as "OR" and for the same transaction data when i checked in PSA it is showing as "TA".
Could you please let me know if there any other options.
Thanks in advance,
Dara.
Maybe you are looking for
-
I have extended JTable for some spreadsheet-like functionality. There is a problem with some columns after a tooltip pops up, the repaint color is wrong. Rows have varying color dependent on content, and the tooltip repaint color is that of another r
-
Can I use Bluetooth feature on my IPad?
CAn I use Bluetooth feature with Verizon cellular phone number?
-
somehow changed a video in my imovie to zero fps, so it just plays black. The video still exists on my desktop but even when I delete the files from imovie and reimport them the file is still in zero fps and play black.
-
I borrowed my Black MacBook out to a buddy of mine (BIG MISTAKE!) I got it back and now the screen/lid part does not close flush with the bottom part. It's not anywhere near noticeable when it's open or even when it's closed unless you're really look
-
Is there a way to get my FCPX audio to Logic Pro?
There was the automatic duck option but that no longer works with FCPX 10.03 Is there a way yet for me to get my audio to Logic Pro for mixing?