Block all inactive vendors

Hi All,
I am trying to block all inactive vendors in trasaction f.98 other analysis>account>list of vendor w/o business transaction per year. But it is blocking vendors with open items too. Is there any other other way we can block inactive vendors.
Thanks

Hi,
Good evening and greetings,
Wishing you a Happy New Year 2007
Go to transaction code S_ALR_87012103 and display the vendor line items and choose only those vendors who dont have any transaction for a specified date range. Use BDC to pass on the inactive vendors to run through XK05 and block the vendors.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Similar Messages

  • Blocking the Inactive Vendor Accounts

    Hi,
    I am new into FI and I have a very basic question. I want to find out if there is a program that can be scheduled to run every day to find and block the inactive vendor accounts for a specific period (say inactive for last 30 or 60 days).
    As of now, we are running a report to find the inactive vendors and blocking them manually. But this takes a lot of time, hence looking for a standard solution.
    Please advice.
    Mallik

    Hi,
    Good morning and greetings,
    There is no standard program as such available...the best way to do is build the same logic into a Z program and schedule the program to run everyday using Job Scheduler.
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Active and inactive vendor

    Hi Guys
    can any one explain what is active and inactive vendor and how to see the list of vendor master.
    G.Krishnamohan

    in SAP easy access
    under Financial accounting >Accounts payable-> information systems-->masterdata report
    you can display blocked vendors also as a list there using those reports.
    the vendors which are blocked are inactive vendors
    anantha

  • F110 Blocking all Invoices on a Vendor due to one Un-released PO.

    Hi All,
    We are implementing Vendor Downpayment functionality. I have done all the configuration and we did not activate the business object LOG_MMFI_P2P. We are just using the conventional Vendor Downpayment functionality. We get POs created from SRM. I am getting an error message when I am trying to run Payment run for a vendor for which I have created multiple PO's. Few PO's have Down Payment requests and few do not have. For one PO I created an invoice twice the amount of PO amount, so it went on unreleased status in SRM. Then when I ran the Payment run F110 for that vendor, the payment run is blocking all the other Invoices as well even though they are for different PO's.
    Here is what I did
    1) Created a PO for $100 from SRM
    2) Created a Down Payment request of 50$ for that PO in F-47 and did not process the down payment. Now I processed MIGO for 100$, then created an invocie for 100$. Now i have created another invoice for $100 and posted that invoice. It went on payment block and i released the Payment block for that invoice in MRBR. Since the invoice amount is greater than PO amount in SRM the PO went on un released status and same in SAP as well.
    3) Parallely I have created few other PO's and Invoices for the same vendor without any down payment requests.
    4) Now when I ran F110 for this vendor, due to the unrelased status of one single PO, all other invoices are getting blocked in F110 run. I am not sure why is this happening, any help would be greatly appreciated.
    The errors I am getting are
    Purchasing document XXXX not yet released
    Purchase order XXXXX (assigned to an account) not permitted
    Information re. vendor XXXX/ paying company code XXX...
    Message no. ME390
    Message no. FZ356
    Thanks,
    Uday

    Hi Ramesh,
    Strange error..
    anyways, you have option in Payment Tab to Individual Payment. This will consider each individual posting a separate payment.
    Thanks,
    Deepanshu

  • Inactive Vendor Report

    Hello,
    We're looking at cleaning up our vendor listing and looking for an SAP report that would give a vendor listing that have had no transactional activity in any specified time.  Is there an existing report within SAP that would give at least the following:
    Vendor Name
    Vendor Number
    Last date transaction processed
    Blocking information
    Thanks

    Hi,
    Please refer past threads:
    Inactive vendor list
    Vendor query list
    Thanks!
    Raju

  • Payment block rerlease for vendor/customers

    Hi Gurus
    which t-code we used for  payment block rerlease for vendor/customers
    regards
    Mallikarjuna

    Hi,
    For more clear Use FK05 for vendors
    Give company code and Vendor account no
    enter
    You get screen where you should deselct payment block either code / all company codes
    For customers FD05
    Same procedure
    If it is useful please assing points
    Thanks
      RAM

  • Inactive vendor

    Hello to you all,
    I am looking for a Function which can locate Inactive vendor for certain years.
    Other option I had thought about is to use index within BSIK + BSAK tables that include vendor, company code and year and to locate vendors without line items.
    I will appreciate your advice.
    Regards,
    Amir

    Hi Expert,
    Go through the below link which will solve your issue..
    Generate list of inactive vendors
    Regards,
    GK
    SAP

  • Active & Inactive Vendor

    Hi,
    Is there any report through which we can generate list of active and inactive Vendor codes? This will helpful to create purchase orders against active vendor codes and delete inactive vendor codes.
    Thanks & Regards,
    Rajaneesh.C
    Edited by: Rijurajaneesh on May 17, 2011 8:14 PM

    Hi,
    What is the criteria to decide active or inactive? Payment , PO, IV , Debit, credit?
    There is one std report  MKVZ which gives the status of blocked vendors or vendors with deletion flag
    Thanks
    Diwakar

  • Mass Inactive Vendor Deletion

    Dear Frnds
    I want delete vendors which are not active for last three years.
    is there any standard program n SAP to mark deletion flag for three years or older vendor?
    please reply as soon as possible
    thanks

    Hi Mathew,
    Pls note there is no program to display inactive vendors in SAP, You either have to go the tables BSIK,BSAK and download in Excel and also get data from LFB1 and do a Vlookup.*need to be an excel pro or develop a custom program.
    And If the requirement is due to SOX or other legal stuff you also have to take into consideration that when you post to the vendors you cannot delete them unless you archive the data. , So as long as the Vendors were not posted to you could go ahead and delete or as an alternative try to block them if there was no activity in the last 3 years.
    Hope this helps, and assign points if found usefull.
    Thanks,
    Praveen

  • 0vendor - flag for inactive vendors

    Hello Experts,
    I have a requirement for a flag in 0VENDOR Infoobject to find the inactive vendors.
    This falg should be set for those vendors who have no Purchase order/ Logistic Invoice created in the past 18 months.
    Is it possible to get the desired result through 2LIS_02_ITM or 2LIS_02_INV? If yes then how this can be achieved through trasformation?
    Thanks,
    Jaibir

    Hi,
      Ideally this does not constitute as master data, since you are checking vendors based on transactional data namely purchase orders.
    What you can do is create a report with restricted key figure with restriction on cal month(document date) for the last 18 months. You will therefore get the vendors which are active for the last 18 months.
    Another way that I can think of is to create a DSO, which holds the vendor no and date of invoice/po loaded from a datasource say 2lis_02_scl or 2lis_02_hdr(anything which gives you the document date and the vendor number).
    When you activate the datasource request the active table will then hold the last date for an order for that vendor. Then load data from this active table to the infoobject. Create a field say no of months in the info object.. While loading to the infoobject , calculate the no. of months between the document date and the current date.
    Please note that these are all ideas and I cannot guarantee that this will work.....would be nice if it did tho.
    Hope this helps.
    Regards.

  • Blocking one time vendor

    All SAP Gurus,
    I want to block one time vendor,
    for that I have used MK05
    Will blocking from MK05 is sufficient for blocking it completely, means no further invoices should be posted for this vendor.
    Regards,
    rajan

    You can block the vendor by MK05 in following way
    01) Lock purchase order
    02) Block request and purchase order
    03) Block quot.req., order and goods receipt
    04) Block source determination
    99) Total block
    Its means only above mentioned function is possible as per your selection choice. It means PO can not be created. Once PO is not there then Logistics Invoice verification can not be done through MIRO with reference to PO.
    But you can create Invoice for that vendor by selected "Vendor" as base instead of PO.
    In nut shell vendor is blocked for above mentioned activity, not for Invoice. so you can do Invoice verification
    Reward it suitably

  • Blocking a particular vendor for doing Migo in his account

    Dear Guru's
    My question is that is it possible to block a vendor so that no transaction can be done in his vendor account number. For example in our senario duplicate vendor number has been created for a particular vendor number and now i want to block one account so as nobody can do MIGO,MIRO or any payment in his account is it possible. I have tried with XK05 total block but it is not working . Problem is that before blocking many PO of that vendor is standing and they are reciving the material from that Po and system is allowing it to do so.
    Therefore i want to block the vendor so that no transaction can be done in his account. Kindly help me out

    Hi.
    I am Basically MM guy. To resolve this issue I would like to suggest a work around.
    You can use the two payment terms.
    1) One payment term in the company code (In vendor master record in the Payment transaction accounting). In this payment term you have set a payment block indicator
    By doing this system will block all the invoices or Down payment which are posted in FI. Against this vendor. Hence system will not allow you to pay to this vendor against down payment.
    2) Another payment terms in the purchasing view of the Vendor master. In this payment terms do not set any block.
    When you post an invoice against a PO your accounting document will not be blocked.
    Hence you can pay to a vendor with reference to PO invoice.
    I am not sure. I hope it will work. If it helps award me.
    Cheers
    Umakanth

  • Error while activating all inactive infoobjects in DEV

    Hai
    Im trying to activate all inactive infoobject by using program RSDG_IBOJ_ACTIVATE. But it says the following error
    <b>System error in lock management
    Message no. AD025
    Diagnosis
    A system error has occurred in the lock management function.
    The system was unable to determine whether a lock entry existed for the selected object.
    System Response
    The selected object could not be locked.
    Only display mode can be used.
    Procedure
    Make a note of the error code and inform your system administrator.</b>
    why it is like this
    how can i activate all inactive infoobjects in development server.
    kumar

    Hi,
    It seems objects are locked in transport request. Check the 'object directory entry' for the object and find out the transport request/task under which objects are locked. Remove the objects from TR or release the request and then try to activate.
    Hope it helps.
    Regards,
    Aditya

  • How can I get Verizon to block all outgoing messages on my email?

    My email was apparently hacked, it is the main account that I have used for the past seven years and all of my bill notifications and important things come to this address.  I have changed the password repeatedly, run several scans on my main computer, laptop, kindle fire, and cell phone (every device I access the email on) using Norton and Norton Power Eraser on the computers.  Nothing showing up.  
    I chatted with support just now asking them to block all outgoing email and they said it isn't possible and I find that impossible to believe.  I am seeing all kinds of messages here saying that people are being blocked but I can't add an email address to that list?  I need to keep it active for inbound email for a month or so just to make sure that I haven't missed any bill notices or other important stuff.  Any ideas?
    Thanks!

    Pretty hard to do without shutting down the account.
    Assuming you have properlly changed your password, and checked your PC and other devices for viruses/trojatns/etc. Then the person using your email is probably NOT even using Verizon.  \
    Unfortunately the basic SMTP protocol is totally different then most people think.  Who you say you are is not a protected value and you can say you are anyone, yes verizon's servers when initially accepting input do check, but that is about it.  And the displayed sender and addresses in the smtp protocol do not have to match any text in the mail. that you see.
    Typical smtp conversation
    EHLO
    a bunch of auth commands
    MAIL and whoever i claim to be
    RCPT
    [email protected]
    [email protected]
    DATA
    this is what most people is the email and its headers, but can really be anything.
    FROM:  SOMEone
    TO:  you and everyone else they can think of

  • I am recieving calls from a solicitor. Show up as no caller Id. I want to block all calls that do not show caller Id. Can I do that? I am on the do not call list

    How do I block all in coming calls that do not show on my caller Id. Phone says "no caller id" This particular call is from a place selling septic tank cleaner. They leave an automated voice mail. They are calling me over and over. I am on the national do not call list but that's no help. Because the caller id doesn't show anything I can't even report them.
    I remember in the past calling a number and before my call would go thru I would have to enter my phone number so the party I was calling knew who was calling them. That is what I want to do. I want to block all calls from "no caller id" "number unavailable" Just FYI my phone is an IPHONE 5 and I am on Verizon.
    Any help would be appreciated.
    Thanks

        itbitybob, good day!
    Thank you for taking the time to reach out to us today. I know how frustrating it can be getting phone calls from "no caller id" numbers. We do have an option that is called Family Base that will allow you to block unknown numbers, private numbers, or caller id. This link will provide you with the full details of this option. http://vz.to/1gIklla I hope this is able to answer your question. If you have further questions please feel free to reach back out to us at any time.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport 

Maybe you are looking for