Block caller still ringing phone 866 number

Hi I block a number but it is still getting through to cell
help
did last week but it is still ringing me up to 10 times a day

    So sorry for those unwanted calls, tatiasc1! Let's put an end to your aggravation. You mentioned that you've blocked an 866 number. If you blocked it through FamilyBase on an account with more than one number, please ensure that the restriction was placed on the correct mobile number.
When these calls come in, do you answer them or do they go to voicemail?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Similar Messages

  • Cisco 3905 failed but outgoing call still ringing on mobile phone

    Dear all,
    We setup Cisco Call Manager 10 with Cisco Voice gateway 2911 ( E1 port) and 3905. All outgoing call & incoming call are ok. But we meet a small issue as below:
    -Using 3905 do outgoing call to mobile number. Mobile number ringing.
    -3905 failed without power but the call still ringing on mobile phone.
    Anyway to fix that ?
    Thank you & regards,
    ThànhNT

    Hello,
    So, your config looks good.
    Pelase, can you explain what you mean when you say:
    "-3905 failed without power but the call still ringing on mobile phone."
    You can try a "debug isdn q931" on your gateway and see if the disconnect is ok. Use the documentation bellow to understand the debug:
    http://www.cisco.com/c/en/us/td/docs/ios/12_2/debug/command/reference/122debug/dbfipx.html#wp1018126
    If the disconnection is good, you will need to understand your call flow.
    Phone -> CUCM -> Gateway -> PSTN -> Called Party
    The final disconnection point is provided by your telco, and it can send the disconnect late.
    Please, let me know the result of the debug.
    best regards.

  • My phone comes up as private or blocked call on other phones

    Whenever I make a call to other phones whether land lines or cell my phone always comes up as blocked or private. How can I change this?

    Settings > Phone > Show My Caller ID.
    Is this on?

  • How to block calls & texts from one telephone number

    How to block calls & texts from one telephone number

    Call number blocking is done only by the carrier. Some carriers allow users to input numbers to be blocked on a website.
    Verizon allows users to list up to five numbers to be blocked for free for 90 days by entering them in the users My Verizon site. I've found that 90 days has been sufficient to discourage most nuisance calls. But Verizon also provides a service ( for a fee) that will permanently block a number.
    So contact your carrier to see what they offer.

  • Blocked caller still getting through!!!!!!!!!!!!!!!

    **bleep** is the point of "blocking a caller"  if media messages still get through???  when said harassment caller sends media messages I get a notification that is every bit as annoying as if I got the **bleep** message itself!!!  Why the hell is this the case?  why does verizon do this?  why would I want to know this {word filter avoidance} is still sending me messages if I went through the trouble to block them??

    hatchet wrote:
    **bleep** is the point of "blocking a caller"  if media messages still get through???  when said harassment caller sends media messages I get a notification that is every bit as annoying as if I got the **bleep** message itself!!!  Why the hell is this the case?  why does verizon do this?  why would I want to know this _______ is still sending me messages if I went through the trouble to block them??
    First off the F word is uncalled for.
    Second. people can send messages from various other sources than their phone, to easily get through to you. Just like they could place *67 in front of your number and the call would come through as VZW would be unable to determine the number.

  • HT4623 How can I receive blocked calls on my phone

    I am a hospital driver.  The hospital number is a withheld number.  They cannot leave voicemail messages for me.

    That's between you and your carrier. The phone does not prevent any caller, regardless of the caller ID information, from leaving a message. Voicemail is strictly a carrier feature.

  • Translation and Called # on the phone display

    Is there any way to made translation but leave displayed called # on the phone to number before translation?
    And similiar one with RoutePattern:
    When i prefix something like "666" on LG level to called #, after Setup/connect phone start to display called number with this prefixed digits. Is there any way to stay display w/o prefixed digits?

    I check it up, when user dialing and waiting for CONNECT from PSTN side - display shows correct short number, but after connect the number changes to long one. On isdn site it looks like:
    - dialed #: 12345678
    - called to PSTN: 6666666601234567
    (6666660 is IVR/IN telco operator number)
    and and i think becouse ISDN gives "connected" with called # no "real Called ID".
    Is there any way to made it displaing just 1234567 ?
    Sth like - always how dialed # or something ?
    TIA!

  • HT201229 I have blocked a number but I still get a voice message from that blocked caller?

    I have blocked a number but I still get a voice message from that blocked caller?  Another words I still get a voice message from the blocked call.  How do I stop this?

    That's the way all of these phones work. There is no way from a phone to completely and truly block a caller. What you get is more of an "ignore" so the call doesn't ring or notify you but rather goes directly to voicemail. If you want the caller blocked completely, the only way to do that is to call your cell carrier and ask if they can block the caller. Some carriers will and some won't.
    Regards.

  • Phone does not ring when unknwon number calls

    Please help. This has only just starting happening.
    If a phone call is received from a number not in my conatcts list, the phone does not ring.
    Any ideas anyone.
    Thanks Rich.
    Solved!
    Go to Solution.

    It may happen that profile exception is active.
    To check this go to Profiles -> Advanced -> Uncheck all check box under User Active Profile Except fo:
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • How do I quickly turn off the notifications in ios 5 but still allow the phone calls to ring.

    I am trying to learn how to set my Iphone 4 with the ios 5 to silent but still allow the phone calls to ring aloud.  At night, I do not want to hear emails and text messages come through, but if someone calls I would like my phone to ring and wake me up.  Can this be done easily?  I do not wish to go into each notification section and turn off and back on.  Hopefully their is a quick set point that would allow all notifications to be turned off and still allow the phone itself to ring.

    hi mtbomb,
    hi Can you while the Power LED is blinking hold the power down don't let it go until the light disappeared.
      Technically the Yoga13 should turn off while holding down the power. at least 10 to 15 sec.
    I would suggest calling Technical Support if the above steps did not resolve the issue.
      It's possible that when you turn on the system, it is not going to sleep but the blinking indicates failure.
    Best regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Phone black screen but still rings if called

    my phone is on cause when someone calls it rings but i can not see display

    OK.  Thanks for letting us know.
    Do you have a technical support question?  If so, please ask, and tell us all the troubleshooting steps you've taken.

  • Home Hub Phones & blocking calls from a particular...

    I have a BT Home Hub 1.5 and the Hub Phone. Is it possible to block, or blacklist one phone number, so as it cannot call my hub phone?
    I tried saving it in the phone book & allocating a ring tone of "None" but it still rings. I have also looked under Advanced in the web interface for the home hub, but cannot see anything there either.

    Hi KeithAFrench,
    If you take a look at the link Choose to Refuse, you will find some information on calling feature and this could help you to block calls from that number. Let me know if you still have any question regarding this service.
    Cheers
    Paddy,
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • How to change caller ID when agent is still ringing

    Hi all,
    I'm using UCCX 8.5. When there is a call from outside to a contact center and when agent is still ringing, the caller ID presented in the agent is CTI port number of UCCX. I wonder if it is possible to change this CTI port number to outside caller's phone number.
    Thanks.

    Sorry, but no. This is because CCX does the equivelent of a warm transfer to the agent's ACD line. Until the transfer completes you do not see the original calling party information. You'll want to look at the CAD or IPPA Enterprise Data to see the ANI/Caller ID.

  • My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

  • I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring.

    I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring. One phone is for work and one is for private and I don't need both phones to ring from one call. It's bizarre.......is this supposed to be like this? If so where can I turn it off?? And while we are at it iOS8 has installed iBooks on both of my phones and iTunes won't let me uninstall it. I don't need or want iBooks on my phones.

    Hi,
    There are two easy fixes to this.
    One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
    Two, go to Settings and turn-off "Handoff". This can be found under the General page.
    Hope this helps!

Maybe you are looking for