Block default cost center in OKB9

Dear Experts,
- If I would like to block one cost center which setting in OKB9 as defaul cost center, then change it to other cost center, what is the affect?
- If cost element in OKB9 is having no cost center as default , then how the transaction from FI flow to Controlling?
Kindly advice.
Thank you.

Hi Puri,
When you give any Cost Center as default object in OKB9 for any Cost Element, that means, whenever there is a posting in FI in that GL, the system will prompt the default Cost Center in that line item. User will still have facility to change that cost center and can enter new cost center.
If you want to replace a new Cost Center with a old Cost Center in OKB9, you can do that at any point of time. No implications.
If you do no mention any Cost Center as default object in OKB9 for GL, nothing will happen but the User has to select the Cost Center manually at the time of FI postings.
Srikanth Munnaluri

Similar Messages

  • Sub-contracting based on materials and no default cost center

    Hi Experts:
    I have searched the forum before posting this question. My client wants subcontracting to be based on materials. A cost element 123 has been assigned to Transaction GBB. This cost element has been defined in OKB9 and is hitting one default cost center.
    Client wants the system to be able to post directly to cost center for the material brand as opposed to a default cost center. If I delete account 123 as a cost element and delete it's assignment to a default cost center in OKB9, and assign all valuation classes to account 123 under transaction GBB, will the user be able to specify the cost center manually? Where do I go to check the settings?
    Thanks in advance for your help !
    Mariam.

    Hi,
    If you would like to assign the cost object (cost center) to your G/L account, then your account shall be set as cost element.  Make sure also that the setting via Transaction OME9 for your account assignment category "K" shall be set so that cost center field is mandatory which requires your end users to manually enter it during PO creation.
    Cheers,
    HT

  • How to assign default cost center and G/L account in Purchase requisition

    Hi,
    While creating the  purchase requisition ME51N in account assignment we have to enetr cost center name and G/L account but every time we have to enter this how to assign this as defaut value , like cost center : MSMISC and account 42XXXXX.
      REGARDS,
        ZAFAR

    hi
    if the field is required then u have to enter them manually
    so if this are not required then goto OKB9 here give the default cost center for the Gl acct

  • Default cost center can't work

    we encounter a error in MI07, it says account 5300010 required a assignment for CO object, however we can't set default cost center for this account, because for inventory difference we need to go for different costcenter. is there any other solution, 5300010 is created as cost element.

    Hi,
    What is the basis for determining cost center ?  Without ascertaining this, you can't resolve your with a substitution.
    I have used OKB9 settings to post these kinds of scenarios.
    Best Regards,
    Madhu

  • How to Default Cost Center During Goods Issue (tcode: MB1A) To Prod Order

    Dear Experts,
    How to default the Cost Center/ Profit Center during goods movement posting?
    Currently, for Goods Issue transaction, the cost center show blank. Even i have default C.Center in cost element (OKB9) 
    Where to link Cost center/ Profit Center to MM module?
    Need your help.
    Thanks,
    Kiran D

    a. If you want to default a cost center to the transaction then use substitution. Give the default profit center in the cost center. so profit center will also get defaulted.
    b. if you want to default the GL account then configure it in OBYC, then use OKB9 to give the default cost center and profit center.
    anantha

  • Default cost center not appearing for certain users

    Hi Gurus,
    We are on SRM 4.0 classic scenario.
    For certain users when they create SC in SRM the default cost center is not automatically taken into account even if they change it to it. The default cost center was changed for these users and some of them still refer to the old cost center no. which was maintained for them.
    The users are not defective and the except the cost center all other attributes work fine. I have tested by deleting & recreating new BP no. for the users but it still doesnt help. Please advise.
    BR,
    Sambit

    hi
    check if the users are correctly mapped into org structure (ppoma_bbp)
    than check if theri Position are correctly mapped with the default cost center (ppoma_bbp; tab attributes; cost center
    regards
    andrea

  • How to block the cost center

    Dear Guru's
    Can any tell me how to block the cost center, can we detele which is having values. can we delete which is not having values
    Regards
    Chandra Sekhar Reddy.P

    Hi,
    Once you post actual values or any planning exists on this cost center you cant delete.
    To ristrict posting to cost you have two options.
    1.You can change validity period.
      change  end from 12/31/9999 to what ever date you want to stop posting(e.g. as of today 10/23/08)
    2. lock all postings to cost center on Control data tab in KS02.
    Thanks,
    Rau

  • How to assign default cost center to exchange differences ?

    Hi all,
    Default costcentre for currency exchange differences missing in the company code.
    How to assign ?
    Please answer at the earliest.
    regards
    narasimha rao

    Hi,
    Have you able to assign default Cost Center in case of Exchange differences?  If yes, how is that possible.
    We also want to do the same activity in case of Foreign Exchange Revaluation.
    Please share, points will be assigned.
    Regards,
    Shridhar

  • Adding cost center on OKB9 with cost element company code with valuation ar

    hi ,
    can anybody help me out with the Adding cost center on OKB9 with cost element company code with valuation area configuration.
    i have to do this configuration but do not know the detailed steps for that one.
    Good points will be awarded.

    Hi Prem
    Select the 1 in column acct assignment details column then in the left side in detail per business area/valuation area enter your valuation area.
    Thanks
    Ashok

  • Default Cost center in Foreign Exchange fluctuation account

    Hi
    I am doing FB60 of 100$ (1$ = Rs.45). Cost center used at the time of FB60 is 1100 (i,e, engineering division) Now i am paying in full and clearing the same invoice. Exchange rate at the time of Payment is 1$ = Rs.47.
    Now the SAP is picking the cost center given in FB60 i.e. 1100 instead of cost center (i.e. 7500 - finance) defined by default in the cost element. Let me know why the system is picking cost center from FB60.

    HI,
    Is this issue solved?  If not try this thing. Remove the cost center assignment in the cost element, as you are assigning the profit center in OKB9. For a cost element if it is a revenue item profit center should be assigned, if it is a cost item cost center should be assigned.
    In your case, cost center is assigned in cost element and also profit center is assigned in OKB9.
    For one cost element we can not assign both cost center and profit center.
    Hope this should help you
    Thanks and Regards
    Om prakash RA
    Edited by: Om Prakash Arjuna on Nov 27, 2009 3:57 PM

  • Re: Default Cost Center

    Hi,
    Besides using the personal setting or setting parameter id at the user profile..is there any other way that i can
    default a cost center value during PR creation ME51N?...
    Thanks in advance.
    She

    Hi,
    You can use OKB9, here mainatin Default Cost Centers for the Cost Elements.
    Also check in SPRO > MM > Purchasing > Account Assignment > Maintain Account Assignment Categories > For Account Assignment Category (For e.g. "K" - Cost Center), in detailed screen, "Derive acct. assgt." should be active.

  • F-28 Default Cost Center for Exchange Rate

    We reorganized our company recently and closed down some old cost centers.  When we receive an incoming payment via F-28, the exhange rate difference automatically get posted.  The problem is it's trying to post to a closed cost center.  I can't figure out where it's defaulted in the configuration.
    Can anyone help me?
    Thanks,
      Jonathan

    Try OKB9.

  • TAX code requires default cost center

    Hi,
    There is an error coming while posting the MIRO Invoice with tax code ( need to be charge to PL Account) " put the cost center " for GL Account for tax code. This is  a cost element & hence requires cost center but the field for entring tax posting. Issue we are facing is that we are forced to default the cost center as screen is not input enabled(greyed) for cost center in tax calculation screen & it is also not picking up the cost center from purchase order screen.
    Need to know any solution for this issue.
    Regards,
    Vipin

    Hello,
    Kindly refer to the thread to resolve your issue here.
    Table for user attribute data
    Thanks & Best Regards,
    Rahul

  • How to maintain default cost center at House Bank Account level for Bank charges

    Hello All - We have 4 Bank accounts and all of them are assigned to the same transaction type.
    As of now, we have OKB9 set up maintained for Bank charges at Co Cd level and it is posted to the same GL A/c.
    Now, My requirement is that I need to have different Cost center maintained for 2 of the 4 House Bank Accounts.
    Can you pls let me know if any possibility.
    Thanks

    Interesting requirement. This can be achieved through Search String as suggested by Mr. Shanid.
    Try to find a text in the note to payee line for bank charges for creating a search string.
    For Example. See below note to payee line and assume this line for bank charges.
    16,455,130155,0,5/3 BANKCARD SYS  CH,,5/3 BANKCARD SYS  CHARGBACKS.
    Identify a text which should always come with this line for every EBS file for bank charges. Assume here "BANKCARD".
    Now go to T-code OTPM.
    Click on create
    Srch strg name:  Bank Charges
    Description:     Bank Charges
    Search String: BANKCARD ( Based on this text system will search your not to payee line)
    Once you press enter, you will get mapping details on the left side with target field "BANKCARD". Now remove the BANKCARD from target field and put there cost center which you will post for one house bank. Save the data.
    Now move to second step.
    Click on Search String Use.
    Put your company code,
    House bank(mandatroy in your case).
    Interpretation Algorithm( same as you maintained in OT83 for posting rule with external transaction type).
    Search String: BANKCARD.
    Target Field: Cost Center.
    Save.
    Sorry I am not getting option to attach screenshot in SCN now. Dont know why.
    Let us know if you have any doubts.
    Hi Mr. Shanid,
    Correct me if I am wrong.
    Regards,
    Mohammed

  • Account/Cost Center Determination (OKB9) for same plant & 2 cost centers.

    Hi,
    I faced a weird situation My situation is i have the same plant but 2 different profit center's & 2 different cost center's . My OKB9 cost element is configured through "Plant/Valuation Area (1)".
    Previously when ever we used this "Plant/valuation Area" determination we used to give plant and corresponding cost center and left other fields like Business Area, Order and profit center blank. see below thing for clear idea
    Plant A - Cost Center A
    Plant B - Cost Center B
    Now with this weird situation, i am not sure whether we can configure OKB9  as below
    Plant A - Cost Center A - Profit Center A
    Plant A - Cost Center B - Profit Center B
    If we can do as above, will their be any implications.
    could anyone help me out of this situation.
    Thanks
    Shriya

    HI
    No complications for this u can assign the CCtrs to Profit Centres.
    Regards
    Shammi

Maybe you are looking for