"Block Files That Cannot Be Scanned" in TMG malware inspection feature didn't work

hi friends.
in my TMG test lab, i have enabled malware inspection both Globally & on my web access rule & in its settings i have selected
"Block Files That Cannot Be Scanned".
now in my test external website i have a text file which is archiced it via winrar & set a password on it. password is 123.
now when i connect to that website, i can download that file & unzip it.
why TMG didn't block this pasword protected archive ? it must block according to this option : ( "Block Files That Cannot Be Scanned".
any help ?
thanks in advance

Hi,
Thank you for your post here.
Before going further, we must make sure that we have enabled Malware inspection and we need to note that web protection need license.
Please follow the steps below to verify if your malware inspection is enabled meanwhile update the latest definitions.
http://technet.microsoft.com/en-us/library/dd441078.aspx
Additionally, you could try to check both “Block encrypted files” and “Block Files That Cannot Be Scanned” options to see if it works.
Best Regards
Quan Gu
hi quan, thanks.
malware inspection is enabled with evaluation license & is not expired.
both chek marks are selected but it again doesn't block password-protected rar files. if possible please test that.
many thanks in advance

Similar Messages

Taking all challengers: The demon file that cannot be exorcised

Let the game begin.
I have a file that cannot, repeat, CANNOT be trashed. In fact, I can't do much with this bloated Quicktime file created in Final Cut Pro. It cannot be opened and now, cannot be deleted (I can't even remove it from the trash). In fact, it can't even be accessed with Get Info without the dreaded multilingual freeze-frame warning: You need to restart your computer…" I've seen that taunt at least two dozen times so far tonight.
I wouldn't spaz out about it but the thing is an inaccessible 9 GB space hog on my hard drive.
I've tried the option-key route, tried third party utilities like Trash It!, Force Empty Trash & Cocktail. I've even gone the Terminal "sudo rm" route to no avail (if you're wondering, yes, I have tried going single-user mode and, no, it didn't work either).
If anyone can crack this one, they can use me as a reference that they are indeed a Mac god.
Mark Gibson

Hi, Mark.
1. You wrote: "I've run Disk Utility and repaired permissions from my OS X installation disks..."That's not what Mike suggested back here. It's not clear from your response to him, i.e. "I've actually already run Disk Utility..."if that meant you employed Repair Disk.
If you're unsure, perform at least steps 1-3 of the Procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ.
2. The persistent kernel panic when attempting to access those files implies something is amiss with the drive, the OS, or the Mac itself. See also my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics. The FAQ is a roadmap: start at the beginning and work systematically through the end, i.e. the "If all else fails..." section.
3. Was the file you created and trashed saved on your startup disk or was it actually on another drive/volume before you trashed it? See my "Solving Trash Problems" FAQ for some info on the architecture of Trash under Mac OS X.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

You mean an image such as a scanned document?
If that is the case, the file doesn't contain any text for Reader Out Loud to read. In order to fix that, you would need an application such as Adobe Acrobat that does Optical Character Recognition to convert the images to actual text.
You can also try to export the file as a Word document or something else using ExportPDF which I believe offers OCR and is cheaper than Acrobat.

HT4623 i have already did the update and the i clicked on install now then they told me that the phone is oing to restart and it didn't work the apple signe is always appearing

i have already did the update and the i clicked on install now then they told me that the phone is oing to restart and it didn't work the apple signe is always appearing

Reset, hold both home and power buttons for about 10 seconds until the iPhone restarts itself. If still problems, Restore iPhone again with iTunes on computer. If you have trouble, put iPhone into Recovery Mode. Open iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, click Restore button of iTunes.

Word 2013 generates .docx files that cannot be read on Word 2010

Howdy,
I received a MS Word document that was created on Word for Mac 2011. I opened it, edited it and saved it in .docx format. I have MS Word 2013 running on a humble PC.
Now the Mac cannot read my file. Also, PC's running Word 2010 cannot read the file.
However, many different machines running Word 2013 can open the file, Google Docs can open the file, Word in the Cloud can open the file, open office can open the file and even Word 2003 with the compatibility pack can open and edit the file.
Mac's give an error message that essentially says "xml format incorrect". PCs simply say the file format is wrong. No other details. Various compatibility checks inside word say that everything is compatible with prior versions
of Word with the exception of my equations which it says will be converted to .gifs if viewed in word 2003.
Any idea what is going on? Supposedly, Word 2007, 2010 and 2013 all use the same xml formats, so its a bit of a mystery why 2010 (and 2011 on the Mac) cannot open a standard format .xml file that was created by 2013.
The file contains text, figures and equations. Nothing else. No macros, no VBA code.
Thoughts or advice?

Hi,
What is the file's original extension? .doc?
If you saved the file in .docx format by changing the extension directly, the issue may occur, please make sure you saved it by "Save as". Or we can rename the file from ".docx" to the original extension, check if the issue
persists.
If it's not your scenario above, we can also try to "repair" the file in Word 2010:
Open Word 2010, Click File -> Open -> Browse to the file and use "Open and Repair" to open the file.
If the suggestions above don't help, please provide the exact error message that you get in Word 2010 so that I can perform further research.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I have a missing event file that cannot be reconnected.

I have a file that is missing in the event. Whne I try to reconnect the file I get an error stating that the original file has no video and cannot be reconnected. There are no red files in the event browser. I have re-imported the file and can use it just fine. I am asking to see if anyone knows howe to "forget" the missing file. There are no alias's in the original media folder and the missing file does not exist anywhere on my machine.
Any help is always appreciated.

This is a serious problem w/ FCP X 10.0.5 for simple footage with modified TC fr. dslr h.264 footage. I had to delete the clip and reimport all over otherwise it will not let me relink. Hopefully they'll make it like FCP 7 and let the clip import w/ the adjusted parameter.

Is there a way to automatically sort/filter the itunes music list by files that cannot be located?

I have quite a lot of files that can't be located, and want to delete them all at once rather than clicking on everyfile to choose delete. Does anybody know of a way to sort the itunes listing so that I can group them all together to delete, or a way to automatically purge them all from the itunes file?

But is there a way (simple or not-so-simple) to find
out EVERY SINGLE FILE that's referenced on a
timeline? (I have lots of stuff imported into the
project that I know isn't used on any timeline, but
I'm afraid of moving or deleting things for fear of
never finding it again.)
I'd love to get some sort of "printout" (a list or
something) of every single file.
There is, go to browser and cntrl click on any one of the columns,
and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
Hope this helps and that I've read you properly,
Peace
P-Book 1.5, 17" 2gsRAM Mac OS X (10.4.4) FCStudio

Cannot send messages after crash, the solutions offered didn't work.

On Tuesday (april 7) there was an update to 31.6. On Thursday there was a crash. Since then cannot send messages. The solutions offered didn't work.
I'm getting the message that the SMTP-server doesn't support the selected authentication.
I tried the solution mentioned. But nothing helps. I configured the outgoing server on the different types and deleted the password as mentioned. After that I did the configuration with the different types of configuration again. No solution.
There is not a web-mail possibility. So I'm stuck now.
There is no problem with the incoming messages, they are coming in. Should this password be deleted also?
Any help would be greatly appreciated.
Greetings,
AZ58.

Check with your email provider about the correct server settings, and compare that with your account settings.
There is no point guessing or trying arbitrary combinations of settings.

The Block diagram that cannot be edited...

The customer wanted to launch the application ( done in LV7 ) with a shortcut from the desktop and when done with it wanted to close all including the LV environment.
So I made the following changes :
1. Made the application to "Run on Open "
2. Connected the while loop Stop button to the "EXIT" function.
3. Saved and started the application.
Presto!! All worked as expected. Except that I no longer was be able to Edit the block diagram !!
Good - I had a copy of the code before the change and survived the nightmare ....
So the moral : Be very clear of what you are doing before you use the EXIT function.
Just though will share the experience, before somebody makes the fatal mistake as above.
( I have now ordered out my copy of the Application Builder, so that I can have my editable code well away from the customer's PC.)
Raghunathan
Raghunathan
LV2012 to Automate Hydraulic Test rigs.

Here's another way to do it.
Create a directory in your LabVIEW x.x directory named 'wizard', and save the attached VI there. If LabVIEW is running, you'll need to restart it, but then in the 'File' menu, you'll have a new selection named "Supress Run on Open...". Select this and you'll get a browse dialog to select the VI to open. It opens it by reference so it will not run.
This is saved in LabVIEW 6.1, but works fine on 7.0 and 7.1.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Supress Run on Open.vi ‏18 KB

How to delete all "files that cannot be found" files faster! Desperate!!

Hey!! So for the past year and a half, i have had hundreds and hundreds of songs that read "----- file cannot be found--" due to me listening to cd's through itunes, without properly importing them. The result was every song file was saved without the song! So now after i imported the CD's correctly, i have quite a few duplicates of hundreds of songs, and the only way i find out which song is the duplicate is by manually trying to play the individual song. I wish to DELETE all the BLANK songs whether they be duplicates or just single files. I was just tolerating it all this time, but now that i ordered my itouch, i need to consolidate my library! Please help, thanks!!
PS: I saw other threads where people wanted to delete duplicate songs, but i didn't know if the programs that where reccomended to them deleted a random duplicate, because if that is the case, it could delete the good copy of the song, where i would want it to delete the blank copy. Thanks again.
= ]
THANKS AGAIN!!! PLEASE HELP THIS PROBLEM IS KILLING ME! =O
Message was edited by: mr.nooby

Here is a script to find dead tracks.
Rename it to FindDeadTracks.js
Run iTunes.
While iTunes is running, double click FindDeadTracks.js to run the script.
http://ottodestruct.com/itunes/FindDeadTracks.txt
You can look at the resulting Notepad document it creates, if you like, to make sure it found files you were expecting.
Then to get rid of those tracks, download this: http://ottodestruct.com/iTunes/RemoveDeadTracks.txt
Rename it to RemoveDeadTracks.js.
Run iTunes.
While iTunes is running, double click RemoveDeadTracks.js to run the script. It'll remove all the exclamation marked tracks.
For the duplicate tracks, you pretty much need to look at those on a case-by-case basis.

How can I get rid of files that cannot be imported error message

Hello, this is my first post. I am a new mac user. I have imported my jpgs from an external hard drive which was in the most part successful, however, 14 of the files appear to be corrupted and every time I open iphoto9, I get the error message, '14 of your files could not be imported, would you like to import them now?' I have tried choosing both options yes and no and it then writes error message telling me it has created recovered photos folder. When you go to this folder it is empty and every time I restart iphoto, I get the same message. I have tried deleting all the files and re-importing only to find that the number of corrupted files has now doubled. I have also deleted the iphotos library recovered photo folders to no avail. I have tried creating a new library and importing the files to that but the same problem occurred. How can I get rid of this repeated error as I am now up to recovered folder number 47! Help!

P Robbins
Welcome to the Apple user to user assistance forums
quit iPhoto and right click (control click) on the iPhoto library (in the pictures folder by default) and select the show package contents command - find the import (or importing) folder and drag it to the desktop and launch iPhoto - you should be fine now - open the import(ing) folder on your desktop and if there are any photos you want import them then trash the folder
LN

Files that cannot be deleted or opened

I have filesthat appear on my hard disc and cannot be deleted or opened. How do I get rid of these?

As an "administrator account", you should be able to "sudo" before commands such as "rm" (delete) or "chmod" (change permissions of) a file.
But before you start going "sudo-happy", what and where are the files? I ask because some files should not be deleted except by existing automated processes.

HT5409 clips on sony ax2000 mount as quicktime with avchd file that cannot be opened - Help!

I have tried iskysoft medie converter and aiseesoft AVCHD converter for Mac -- they cannot read the AVCHD file. I cannot get either program to load the file. I have conntected the camera to the mac with USB and dowloaded the file, but then it cannot be opened in ANY program. Smaller files have opened in Quicktime, but these have many multiple clips. Anyone know how to convert these?

Yes, you have missed a few things... as mentioned, what camera, what 'options', such as 24p, 60i, whatever... how you have output the results, etc...
I personally can not 'play' AVCHD on my aging laptop, my 'workhorse'. I always have to resize down to something less than 1080x1920 to 'play' smoothly on it.
Also, H.264, has a number of 'options', such as maximum bit rate, which does impact the visual quality on playback... anything less than 20-30 Mbits/sec is too low... (which of course leads into whether your machine can play it or not...). In addition, where you store your output also impacts playability, USB driver are notoriously slow, and often a clip will play off the main harddrive, but hiccups off of a USB...
So, yeah, you have missed a few items, and probably more...

How to free up media files that cannot be delete u...

I watched a couple of videos on the lumia last night. I used the browser to "stream" these by the movie player. The two movies were about 2Gb each.
Now I have no free storage on the device.
I have tried going to storage check and it tells me that of the 7.2G 7.1G is use with 4.4Gb in media files. The next screen ("details") shows an "other" of 4Gb. How do I delete those temporary files? None of the options work. I don't want to do a factory reset. This is unacceptable. And I don't want a 4GB phone, whenI paid for 8Gb. How do I delete these files and reclaim this space?

Hi, sthomo. Welcome to the Nokia Support Discussions! Aside from Storage Checker, you may also try these applications to manage your memory:
Freespace:
http://www.windowsphone.com/en-us/store/app/freespace/4f350434-a5c1-40cf-8355-51f67e9a1045
Shrink Storage:
http://www.windowsphone.com/en-us/store/app/shrink-storage/44672108-f3f8-47df-bd19-3fe94e6c744a
Hope this helps. Keep us posted.

Hi. I have a website that uses Virtuemart and the 'add to cart' feature will not work in Firefox but will in IE. I am running XP and 'Accept all cookies' is enabled. HELP, PLEASE... Thankyou

I am testing our website :www.winningsportstips.com and we have Virtuemart installed and the site will not allow me to select 'add to cart' feature. However if I open the website in Internet Explorer, the feature is available and it functions correctly. I am running XP and have 'accept all cookies' enabled in settings.
Can you give me any clues? Thanks , Vern Nowland

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

"Block Files That Cannot Be Scanned" in TMG malware inspection feature didn't work

Similar Messages

Maybe you are looking for