Block for payment in MIRO if there is blocked stock in quality inspection
Hi all,
In quality inspection, if they put some quantity into blocked stock, then i should go for payment block in MIRO . Here
the QA status may be Pass or Fail.
my payment block will depend upon blocked stock in quality inspection but not on QA status.
Thanks
babu
Hi Pabitra
If the material is taken to QI, then no liability is created for the vendor during GR. Now if you pass it in QA, then the stock moves to Unrestricted stock. Now if you transfer from Unrestricted stock to blocked stock, this will not block MIRO, as the GR/IR has already been hit.
if you bolck payment for these type stock, then you can take help of User Exit, in MIRO
Regards
Similar Messages
-
Avoid blocking for Payment after MIRO
Hi Experts,
How to avoid this blocking for Payment after MIRO is posted
As our Invoice receipts are going to Blocked for Payment for every Invoices we posted in MIRO
If the Invoice Receipt matches with the PO price then it should not block,No need for blocking the Payment.Otherwise everytime we need to run MRBR to release this blocked invoices.
We want Only for Upper/Lower tolerances,the system should block for Payment.
rgds
SwamyHello Swamy ,
"Variances are allowed within predefined tolerance limits. If a variance
exceeds a tolerance limit, however, the system issues a message
informing the user. If an upper limit (except with BD and VP) is
exceeded, the invoice is blocked for payment when you post it. You must
then release the invoice in a separate step. If the tolerance limit for
BD is exceeded, the system cannot post the invoice."
The system will check the lower limit but an invoice will never
be blocked if the lower limit is exceeded. The system will only
display a warning message. In the standard system invoices will only be
blocked if the upper limit is exceeded because normally one
wants to prevent to pay more than expected.
Also you may review user exit exit_saplkont_002, enhancement MM08R002
for blocking.
Regards ,
Jerin Ipe John . -
How to Remove the default Block for payment in MIRO
Hi,
In MIRO after posting the document message is coming,
"Document no. 5105600184 created (Blocked for payment)"
But our requirement is to remove the default "Block for payment"
What is the necessary setting to be done to remove it.
Thanks
PrasantHi
Thanks for your reply.
But in vendor master "Payment Transaction Accounting View"
I have selected the check box" free for payment".
still the message is coming in MIRO
Prasant -
Regarding Tolerance Keys for Invoice Block For Payment in MIRO
Hi all,
In customizing, I have defined Tolerance Keys for Invoice Block for Payment. I have defined all tolerance keys for my company code ...... with Absolute as well as Percentage Limits. But whenever I am doing MIRO & testing for my Block Codes effectiveness, i am finding that everytime my Invoice gets Blocked by Tolerance Key PP(Price Variance) or by date......but not by any other like BD, BW, KW etc. Can anyone help me as how I should check for this. I even tried to study the documentation part available in customizing, but was unable to understand the term like Order Price Quantity units.......Can anyone help me in understanding this thing ........
Regards.....Hi Ganesh,
below is the user exit where you can check the tolarance and put the Block according to the your requirment.
User Exit name - MM08R002 -User exit for tolerance checks
in the above user exit you have to use the below Function exit.
1) EXIT_SAPLMRMC_001
2) EXIT_SAPLMRMP_001
we implemented the above user exit to put the payment block based on the checks.
You can find the documentation of the above exit in the system.
Thanks
Naresh -
Invoice Blocked for Payment in MIRO tcode
Dear All,
After posting the invoice in MIRO, i am getting the message as Invoice posted, Blocked for payment. Where we need to do the settings for this ? In this case again i need to release this doc in MRBR, if i don't want this means, what i need to change ?
regds,
CBHI CB,
While posting a invoice by MIRO, if you come across the following message as block for payment than it is because of Three way matching. You can see three way matching status in purchase order status tab in transaction code ME23N and in purchase order history in item detail.
Generally invoice is blocked for payment because of two issues:-
u2022 Price difference: - Price in invoice is higher than purchase order (above tolerance limit).
u2022 Quantity difference: - Quantity in MIRO is higher than MIGO (or good receipt).
Once invoice is blocked for payment you need to release it for payment via transaction code MRBR. For next time while posting an invoice through MIRO you should post invoice within tolerance limit.
You can display and change tolerance limit for invoice verification in customizing with help of transaction code OMR6.
Regards,
Anand -
Substitution block for payment
Hi,
How to set block for payment indicator for unplanned delivery cost invoice created from MIRO.
Transaction procedure :
- MIRO
- Transaction type = subsequent debit invoice
- Go to tab details
- Enter the unplanned delivery cost
If this document saved, I want to set a payment block in the financial document created.
Can I do this with substitution, if yes, please guide me the step
Thanks,
MelissaHi,
You can use Substitution for User Exit
Substitution object: Constant, table field, or exit
There are three methods for changing (substituting) the value in a table field if the Boolean condition has been fulfilled (or is empty). The selected method is displayed next to this field.
The substitution methods and the necessary entries in each case are:
Substitution with a constant value.
You enter the value that is to be transferred to the assigned recipient field. This value is also allowed to be blank.
Substitution with the value from a different table field.
You enter the name of the other field in the following form:
Table name-field name
This field has to be transferred to the substitution, that is it must be a field that is allowed to be used in the prerequisite for substitution.
You can also leave the input field blank. In this case the recipient field is initialized.
Substitution within a user exit.
You enter the name of the exit.
Regards,
Kishore K -
Payment Block for Payment Terms
Please let me know the steps to activate payment block for payment terms
while posting the doucments through MIRO.
Thank you
RaviHi Ravi
while defining the payment terms you can give the payment block.
TCODE-OBB8
Beside to the block key you have one check box available - if you select that, then system populate the payment block only when you change the payment terms in the line item.
But, as you are asking directly with payment terms so you give the payment block in OBB8 without selecting the check box beside to that field
VVR -
User Exit or BADI used to block the payment in MIRO
Hi all,
Is there any user exit or BADI to block the payment in MIRO . please give me in detail with all methods used.
Thanks
babucan anybody give me any answer. thanks.
-
2LIS_06_INV Delta Procssing with invoices blocked for payment
Hi all-
I am using the 2LIS_06_INV data source to determine invoices that are blocked for payment. The required fields I am reporting include SPGRM and SPGRP.
2LIS_06_INV picks up these fields when first blocked with transaction MIRO (setting a qty or price block during posting). However, updates to these fields using MRBR (releasing the qty or price block) are not captured in delta processing (as stated in OSS note 1494379). If the 2LIS_06_INV data source specifically does not handle delta processing of MRBR updates, how does SAP handle the reporting of blocked invoices using this data source?
Thanks!Perhaps a bit late, but interesting for future reference. I had the same issue and logged this with OSS. The response was that it was a design decision not to include MRBR, MRKO, MR11 and MR11_SHOW in the delta process for 2LIS_06_INV.
This means that you have 2 options :
- Ask SAP to create this new functionality (check note 11)
- Create a new datasource (based on the change management CDHDR and CDPOS table, I would suggest) to ensure the correct status is sent to BW (that is what we are planning to do). This can then be extracted after the 2LIS_06_INV datasource.
Regards,
Freek -
There is a issue:
I am posting a invoice against PO before GR posting and Upper & Lower limit of Tolrence key BR is set here as 0% .
hence if I will post a invoice before gr then it should be blocked for payment (blocked ind. will be set as R).
But it's not happning and invoice is not getting block for payment.
pls. suggest me, where is the loop hole?Hi,
R represents manual block, which can be put in the Header Payment block field.
Whereas the same at item level is done as follows:
You can block an item by selecting the Ma (manual blocking reason) field in the item list. When you post the invoice, the system automatically sets an R in the field Payment block in the vendor line of the accounting document. Manually blocked items are given the blocking reason Manual block (M). -
INVOICE NOT BLOCKED FOR PAYMENT QM CONTROL
Dear All,
I have a scenario where I don't want to process the payment if Quality lot is not cleared or rejected. I understand this can be done by using control key 0007 and ticking the QM in procurment in QM view of Material master. I have done this and did the MIGO.
Now with out clearing inspection lot I did the MIRO, when I posted the MIRO I got the message saying Doc no:.......is posted (Blocked for Payment) But when I display this MIRO document in payment tab pmnt block field is in invoice verification status.
When I list the Blocked for payment documents in MRBR t-code it shows this document.
Also I is allowing me to process the payment for this MIRO document.
I do not understand where to make the setting to stop payment.
Please let me know if you do not understand the scenario
Looking for your inputs
Thanks
Dhanuhave you activated the control Key SPRO>QM>QM in logistic >QM in procurement >define control keys.
in your scenrio, it seems it is not defined.
other wise when you posted the invoice, the status would be "the payment of the invoice is blocked with blocking reason I (I = Inspection)"
please check the RSEG-SPGRC when you post the invoice. It should be X
and not the reason which you mentioned, subject to invoice verification
Also assuming that you have QM module in place.
This is what I can make out from the issue which you have mentioned -
Issue For Invoice Blocked For Payment
Dear All,
We received Stock Using MIGO and stock moves in Quality Check. After Invoice Posted using MIRO Invoice created and displayed messages as blocked for payment. Now While making payment for that particular Invoice, system is allowing me to post payment document for that invoice. Actually It should not be post until and unless I released that invoice from MRBR.
Please Help me.
Thanks & Regards,
Mahendra GuptaHi Mahendra Gupta,
I want to know some information about payment block.
Where did you put it payment block option eiether creation of PO or vendor master data. Because we choose the payment block option creation of PO.
Please clarify the above information
Thanks,
Best Regards,
venkat -
Hi,
We know that after booking invoice through MIRO, the document created may go for block for payment. This we need to release either by MRBR or FB02.
My query is based on what configuration in spro do this invoice goes for block for payment?
Thanks & Regards,
IndranilHI,
In spro-Logistic Invoice Verification-Invoice Block here you will get setting for same
and spro-Fin Acctg-AR&AP-Business Transactions-Outgoing Payments-Outgoing Payments Global-Payment Block Reasons-define Payment Block
1 ) Tolerances are defined in customizing to configure which variance to be accepted and which one to be blocked.
check following link also
[http://help.sap.com/saphelp_470/helpdata/en/a8/b99539452b11d189430000e829fbbd/content.htm]
[http://wiki.sdn.sap.com/wiki/display/ERPSCM/MM-IV-LIV-CRESetTolerancesforIncoming+Invoice]
Regards
Kailas Ugale -
Invoice block for payment substitution
Hi,
How to set block for payment indicator for unplanned delivery cost invoice created from MIRO.
Transaction procedure :
- MIRO
- Transaction type = subsequent debit invoice
- Go to tab details
- Enter the unplanned delivery cost
If this document saved, I want to set a payment block in the financial document created.
Can I do this with substitution, if yes, please guide me the step
Thanks,
MelissaOMR9
-
Invoice is Blocked for Payment Automatically - No variance found
Hi All,
We are encountering a problem. Some Invoices are getting blocked for payment with blocking reason R = Invoice Verification.
I checked the Quantity, Price and the Dates in the PO and the Invoice but there seems to be no difference. I also checked if stochastic blocking is on. The user said they did not block it manually. There was no GR created for the PO. Is it because there was no GR created? I checked the PO and only the IR box was ticked.
What am I missing here?
Thanks,
jogradHi,
I checked tolerance limit BR Percentage OPUn variance (IR before GR) and it says Do not check. Does this mean that it should not be blocked? We are on R/3 4.5, so can we use MR02 to release the blocked Invoice?
Thanks,
jograd
Maybe you are looking for
-
Usb-6009 analog output voltage
Hi, The usb-6009 has two 0-5 volts analog ouputs. Is it possible to connect them in series, in order to get a single 0-10 volts analog output channel ? Thanks, Nicolas
-
How to complie an application with many classes?
I build an application with many classes, java palm.database.MakePalmApp -v -version "1.0" -icon 1.bmp -bootclasspath %j2meclasspath% -networking -classpath output %1 this only works with only one class, I do not know if I have an application with se
-
I have the ipad2 and now I want the 3G instead. Any options out there besides the obvious??
-
Where can I find the CRIO-9102 Calibration and ADC to Voltage Conversion VIs ?
I am working through the "Developing High Speed Continuous Buffered Data Acquistion Applications with CompactRIO" tutorial located at http://zone.ni.com/devzone/cda/tut/p/is/3268 I am using a CRIO-9201 analog input module instead of the cRIO-9215 sh
-
Is there any STD prog which update Table TVARV-Table of VAR in SEL Cre
Hi , Can any one tell me which STD program will be used to update the Table TVARV (Table of Variable in selection cretria ). Or this table should be updated manually ? .Please kindly let me know . Thanks & Regards, Veera