Block Inbound Calls

Most of us are probably aware of the limited ability, via H323 gateways and translation rules, to block inbound calls from the PSTN.
Two questions:
1.) Is there another method I may not be aware of?
2.) I was reading about External Call Control Profiles this morning and it seems like a logical fit. Anyone experimented with this?
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_1/ccmfeat/fsextcallctrl.html

Here is great Doc from CCO that outline Voice Translation Profiles and has examples of
various situations. Letting the GW handle it to me seems most straight forward if its H323 GW
Why make CUCM have to even deal with it?
Has example for blocking ext
http://www.cisco.com/en/US/customer/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml
HTH, if it does not answer what your after pls give me some more details on what you want to accomplishand I will see if I can help
George

Similar Messages

Blocking inbound call in CM with MGCP Voice gateways

I'm sure someone has posted on this: We have MGCP voicegateways and CM 4.02aSR2b. How can I setup CM to block a specific inbound call? If the gateways were H323 then no problem, but with MGCP we are stumped. Any suggestions? Thx!

It cannot be done with MGCP. It can be done with H.323 using reject translation rules on the GW.
With MGCP your only option is to route all calls via Unity or IPCC first where logic can be build to block calls.
HTH, please rate posts!
Chris

Blocking Inbound Numbers

What is the best pay to block inbound numbers on CCM 4.1(3)SR1. For example, we have this one particuler number that is probably a computer generated number that keeps calling. When we pickup no one is there.
Where can this be filtered? Thanks!

If your PSTN provider can block it there are some advantages. First you don't have to do it, second even though you can, it does tie up a channel coming into your gateway for the time it takes to reach CallManager and reject it. If it is a computer generated call, it could be making several at a time and could result in a sort of DOS on the gateway. Other than that, you could route it to non-existant phone or I think use a route filter. I would also setup reporting on it to verify the block is working.
Terry

SIP Trunk not accepting inbound calls

I have a CME setup using Engin as a SIP provider
I am able to dial out with no issue, however my inbound calls do not work, they divert to the Engin voicemail
My SIP registration is OK and the number is configured as the primary DN on one of my phones
Router#sh sip-ua register status
Line                             peer       expires(sec) registered P-Associ-URI
================================ ========== ============ ========== ============
038682XXXX                       -1         1124         yes
101                              20001      45           no
102                              20003      18           no
103                              20005      45           no
104                              20006      45           no
I do see the call come in if I debug the dial peer, but it only seems to match an outgoing dp
I am seeing a couple of disconnect cause codes that I cant seem to find any relavent information on in the CCSIP debugs
Router#
Sep 8 18:15:15.009: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_REQ
Sep 8 18:15:15.009: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: dir:2, method:102, resp_code:0, container:4F947560
Sep 8 18:15:15.009: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLPrintTDContainer: Peer-Event: E_STSL_PASS_ST_PARAMS, SE Value:1800, SE Refresher:uas, Min-SE Value:1800, flags:2001
Sep 8 18:15:15.017: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_RESP
Sep 8 18:15:15.017: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: dir:1, method:102, resp_code:100, container:4F947DF8
Sep 8 18:15:15.025: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
Sep 8 18:15:15.025: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_RESP
Sep 8 18:15:15.025: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: dir:1, method:102, resp_code:403, container:4F947B38
Sep 8 18:15:15.061: //156/83D9548A803F/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x4C39C570
State of The Call        : STATE_DEAD
TCP Sockets Used         : NO
Calling Number           : 0417XXXXXX
Called Number            : 038682XXXX
Source IP Address (Sig ): 211.30.48.136
Destn SIP Req Addr:Port : 203.161.164.69:5060
Destn SIP Resp Addr:Port : 203.161.164.69:5060
Destination Name         : 203.161.164.69
Sep 8 18:15:15.061: //156/83D9548A803F/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream             : 1
Negotiated Codec         : g711ulaw
Negotiated Codec Bytes   : 160
Nego. Codec payload      : 0 (tx), 0 (rx)
Negotiated Dtmf-relay    : 0
Dtmf-relay Payload       : 0 (tx), 0 (rx)
Source IP Address (Media): 211.30.48.136
Source IP Port    (Media): 17768
Destn IP Address (Media): 203.161.164.69
Destn IP Port    (Media): 18314
Orig Destn IP Address:Port (Media): [ - ]:0
Sep 8 18:15:15.061: //156/83D9548A803F/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC)    : 21
Disconnect Cause (SIP)   : 403
Any Ideas
Doug

Hi Tapan,
Firstly the topology is as follows
ISP/VOIP provider - Internet - Cable modem - 2800 CME router - IP Phone
The VM is provided by the ISP
debug ccsip messages
Sep 9 10:21:41.488: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
CSeq: 633854439 INVITE
Contact:
Supported: 100rel,timer
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Accept: multipart/mixed,application/media_control+xml,application/sdp
Min-SE: 60
Session-Expires: 1800;refresher=uas
Max-Forwards: 9
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 317
v=0
o=BroadWorks 18275729 1 IN IP4 203.161.164.69
s=-
c=IN IP4 203.161.164.69
t=0 0
m=audio 18128 RTP/AVP 18 8 0 101
c=IN IP4 203.161.164.69
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=bsoft: 1 image udptl t38
Sep 9 10:21:41.508: //4375/867C64EB8067/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>
Date: Fri, 09 Sep 2011 00:21:41 GMT
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
CSeq: 633854439 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
Sep 9 10:21:41.516: //4375/867C64EB8067/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>;tag=39373A4-586
Date: Fri, 09 Sep 2011 00:21:41 GMT
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
CSeq: 633854439 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=21
Content-Length: 0
Sep 9 10:21:41.544: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
CSeq: 633854439 ACK
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>;tag=39373A4-586
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
Max-Forwards: 9
Content-Length: 0
Voice Config
Router#
voice service voip
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
registrar server expires max 3600 min 3600
localhost dns:mel.byo.engin.com.au
no call service stop
voice class codec 1
codec preference 1 g711ulaw
voice translation-rule 10
rule 1 /^0/ //
voice translation-rule 11
rule 1 /^.*/ /0386821234/
voice translation-profile PSTN_Outgoing
translate calling 11
voice-card 0
dsp services dspfarm
mgcp profile default
sccp local Vlan100
sccp ccm 10.1.100.1 identifier 1 version 7.0
sccp
sccp ccm group 1
bind interface Vlan100
associate ccm 1 priority 1
associate profile 1 register confdsp
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 4
associate application SCCP
dial-peer voice 99 voip
translation-profile outgoing PSTN_Outgoing
destination-pattern .T
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 100 voip
session protocol sipv2
session target dns:mel.byo.engin.com.au
incoming called-number 0386821234
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 110 voip
description ** Incoming call from SIP trunk (Generic SIP Trunk Provider) **
session protocol sipv2
session target dns:mel.byo.engin.com.au
incoming called-number .%
dtmf-relay rtp-nte
no vad
dial-peer voice 90 voip
description Melbourne 03 Numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern [89].......
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 91 voip
description National Numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 0[278]........
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 92 voip
description Vic/Tas 03 numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern [56].......
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 93 voip
description Mobile numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 04........
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 94 voip
description 13XXXX numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 13[1-9]...
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 96 voip
description 1300/1800 numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 1[38]00......
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 98 voip
description Emergency 000
translation-profile outgoing PSTN_Outgoing
destination-pattern 000
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
sip-ua
credentials username 0386821234 password 7 XXXX realm voice.mibroadband.com.au
authentication username 0386821234 password 7 XXXX
nat symmetric role active
nat symmetric check-media-src
no remote-party-id
retry invite 2
retry register 10
timers connect 100
mwi-server dns:mel.byo.engin.com.au expires 3600 port 5060 transport udp unsolicited
registrar dns:mel.byo.engin.com.au expires 3600
sip-server dns:mel.byo.engin.com.au
connection-reuse
telephony-service
sdspfarm conference mute-on #1 mute-off #2
sdspfarm units 2
sdspfarm tag 1 confdsp
conference hardware
max-ephones 42
max-dn 144
ip source-address 10.1.100.1 port 2000
calling-number initiator
service phone videoCapability 1
service phone displayOnDuration 00:01
service phone displayOnTime 08:30
service phone displayOffTime 17:30
service phone displayIdleTimeout 00:01
service phone displayOnWhenIncomingCall 1
system message Cisco CME
load 7941 SCCP41.8-4-2S
load 7942 SCCP42.8-4-2S
load 7945 SCCP45.8-4-2S
load 7961 SCCP41.8-4-2S
load 7962 SCCP42.8-4-2S
load 7965 SCCP45.8-4-2S
load ata ATA030204SCCP090202A
time-zone 48
date-format dd-mm-yy
voicemail 90125200
mwi relay
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
web admin system name cisco secret 5 $1$d8/H$glhLiCCWXmFSUp6BtwGho0
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern 0.T
create cnf-files version-stamp 7960 Jul 06 2011 10:32:45
ephone-dn 1 dual-line
number 038682XXXX
label 101
name 7965
mwi sip
ephone-dn 2 dual-line
number 102
label 102
name 7941
ephone-dn 3 dual-line
number 103
label 103
name 7920
ephone 1
device-security-mode none
video
mac-address 0023.5EB8.6E4E
type 7965
button 1:2 2:1
ephone 3
device-security-mode none
mac-address 0019.0633.A933
max-calls-per-button 2
type 7920
button 1:3
ephone 10
device-security-mode none
mac-address 0019.E7B7.BAB3
max-calls-per-button 2
type ata
button 1:1

Blocking outbound calls

Is there a way to block outbound calls to a specific number on fios digital voice?

no, just inbound calls.

The inbound calls to our call center is drop after putting it on hold or transfer

Dear All;
Good day
The inbound calls to our call center is drop after putting it on hold or transfer the call to another agent. The MOH file is playing till 21 sec only then call drop . the agent cant resume the call again. The MOH file is running from Gateway (multicast).
No problem in outbound calls.
I urgent need you help
Should you require any more information , please do not hesitate to contact me.
Thanks & Best Regards,
Muhammad Fathy,
IT Network Manager
ALEXBANK
A subsidiary of Intesa Sanpaolo Group
Head office: B210-F1, Smart Village , KM 28 Cairo-Alex Desert Road, Egypt.
Cell:      +201017288844.
Office: +202-35311300   Ext: 8090.
eMail:   [email protected]
i To maintain a paperless environment, please don't print this e-mail unless you really need to.

Typically you have a codec or media resource issue to track down. IE, MTP, region, location, gateway trunk to trunk to call or something in that area.   Bypass UCCX and do the same call without this app... does it happen with a normal call?

I am recieving calls from a solicitor. Show up as no caller Id. I want to block all calls that do not show caller Id. Can I do that? I am on the do not call list

How do I block all in coming calls that do not show on my caller Id. Phone says "no caller id" This particular call is from a place selling septic tank cleaner. They leave an automated voice mail. They are calling me over and over. I am on the national do not call list but that's no help. Because the caller id doesn't show anything I can't even report them.
I remember in the past calling a number and before my call would go thru I would have to enter my phone number so the party I was calling knew who was calling them. That is what I want to do. I want to block all calls from "no caller id" "number unavailable" Just FYI my phone is an IPHONE 5 and I am on Verizon.
Any help would be appreciated.
Thanks

itbitybob, good day!
Thank you for taking the time to reach out to us today. I know how frustrating it can be getting phone calls from "no caller id" numbers. We do have an option that is called Family Base that will allow you to block unknown numbers, private numbers, or caller id. This link will provide you with the full details of this option. http://vz.to/1gIklla I hope this is able to answer your question. If you have further questions please feel free to reach back out to us at any time.
KevinR_VZW
Please follow us on Twitter @VZWSupport

I'm unable to accept inbound calls on my iPhone 5 for a holden commodore VE - 2012 model - any ideas on how to resolve?

How do I resolve the issue for answering inbound calls on my iPhone 5 when connected to Bluetooth in a holden commodore VE - 2012 model. Outbound calls connect ok.

I'm having the same problem with a 2013 GMC terrain. I don't know if the problem is the car or the iPhone 5. I have been seeing this problem more and more on threads. Can anyone help us with this? Is there any info online from Apple re: new updates that would solve this problem?

How can I block 'no caller id' calls from contacting me?

Over the last couple of days someone has got a hold of my number, and has been calling me with a private number. I want to know if there is a way I can block all calls on my phone that come from a private 'no caller ID' number, and only allow ones that have a caller ID through. I have tried contacting my service provider Telstra which they said the most they can do is put me on the do not call register (which doesn't help my situation at all, as the person isn't a telemarketer). Does anyone have any ideas about how to fix my problem?
Thanks.
(I have an iPhone 5 iOS 7.1.1 and my service provider is Telstra Australia)

There is no Third Party App you can load onto an iPhone that will be allowed to take over your iPhone's Phone without jailbreaking your device (which cannot be discussed here nor would I ever recommend doing it).
One feature you can use is the Do Not Disturb feature. You can set it to allow calls from your Favorites then add all of your people to your favorites, but that is not quite what you are asking for.

Blocking ole call

Is there a way to do a "blocking ole call", i.e. making the calling code stop until the ole-application has exited? I start Word and load a document and then do stuff the file after the user has exited.
I tried using a blocking host command with callback on the document but it had an annoying cmd windows always visible and I would like to avoid digging into the registry to find the word executable.
BTW: what is the difference between OLE2 and CLIENT_OLE2?

client_ole is the implementation of OLE interaction
in WebUtil. When moving your apps the Web, all
previous client-server ole calls would occur on the
server. With attaching WebUtil and a simple search
and replace action you can make it work on the Web
then. I am misunderstanding something or aren't the 9i/10g OLE2 calls already happening on the client? At least the stuff I have tried with OLE2 pops up the application on the client and not on the AS-machine.
From teh top of my head, I think that the host
command in WebUtil allows you to do host command
calls on the client without popping up a DOS window.Yes, but the problem is that i need the window (I run the filename and let windows take care of the rest through extension association), but I would just like to make it more invisible to the user.
-Nik

Debugging inbound call - need debug command

I am debugging what I believe to be a dial plan issue on PGW but want to run a debug command on the ITP to show the actual called number of the inbound call.
What is the best debug command to use to see the inbound called and calling numbers of a call.

You are better off capturing an mdl trace from the PGW using per call tracing or using snoop and opening the call in Wireshark.
The ITP will only dump hex values and you will need to decode them yourself since it is not concerned with ISUP layer. You can use the cs7 paklog feature to attach an access list to a linkset and then send the raw data to a syslog server for decoding.
For example:
cs7 paklog x.x.x.x dest-port xxxx src-port yyyy
access-list 2700 instance x permit si all
debug cs7 mtp3 paklog 2700

IPhone Safari block all calls

iPhone Safari block all calls
When i goin to internet in Safari or AppStore at iPhone, people dont colled me..
Internet(1) + phone talk(2) = only (1) or (2)!
I buy iphone becose i ned internet and i must every minute talkin by phone, when people call to me
But iphone dont work as telephone when i use Internet!
I`m from russia, my mobile operator MTS
Letter from MTS operator:
You may use your iphone only for internet surfing or only use as phone at one time
iPhone is innovation device of Class B, becouse calls and internet you may use only as 1 and 2... but no 1+2 at once time
iPhone not device of Class A, and its problem of Apple, who create iPhone,
sorry but we dont help you.
People! please help me! =) Pleese>>>
Say.. When you in Safari, you recieve calls?
Its really problem of iphone or its problem of my mobile operator? (russia, MTS)
Thanks

Thanks for info.. =)
In russia 3G is comin, in my region 3G and EDGE coming soon.. after NewYear =)
Now in my region work only gprs... =)
but 3g is coming..
SO my operator say, that iphone is a B class phone and its work only with voice only with internet... and dont say about 3g work graet with voice and internet..
thanks very much =)
Message was edited by: stek

Block Unknown Call / SMS

Everything that I have read suggests the you cannot block individual 'spam' calls or text .. is this is the case, it's not acceptable.
I have a Blackberry Z30 .. there MUST be a way to block individual calls or text. You can on other makes of phones so why not a Blackerry Z30. You can block all calls, but that's a little overkill.
I have been a loyal user of Blackberry phones over the past 6 years, if this cannot be resolved soon, when my current contract is up, I will be switching to another make ..
Please advise ..
Thanks

In your BlackBerry World, check out Call Blocker Pro
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there an app for blocking cell calls

Is there an app for blocking cell calls?

There is not. Look to your right under "More Like This" for related discussions.

How to Block Unwanted Calls in Nokia 5330

How can i block unwanted calls/sms in Nokia 5330 TV Mobile Phone??? What supported apps or software can i install???

Not possible on your S40 phone ..

Block Inbound Calls

Similar Messages

Maybe you are looking for