Block internet access by MAC address all the time

I want to be able to block MAC addresses from accessing the internet but allow them to use the network.
I can do this in other router interfaces but the BT Home Hub 2.0 has a VERY un user friendly interface and will not allow advanced internet access or other settings to be modifyed to suit my needs.
I am at an intermediate level at understanding network equipment and an expert at residential networking.

Not sure about the home hub 2, but on the home hub 1 you can use a "user defined" firewall setting to block access to a computer by specifying its IP address.
Source LAN
Interface 192.168.1.xxx (address you wish to block)
Destination WAN
Service ANY
Action Deny
You can tell the home hub to always use this IP address for the device you are trying to block.
There is probably a similar setting on the home hub 2.
By default I block all Internet access for devices, then I have rules to allow HTTP, HTTPS, POP3 and a couple of others.
I also have UpnP disabled.
This prevents any computer on the network accessing any non-standard ports.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

I think my computer has a virus, when I get on the Internet, ads will pop up all the time, I think it is called adware? Also pages will pop up saying something along the lines of my computer is at risk for some security issue. What should I do?

I think my computer has a virus, when I get on the Internet, ads will pop up all the time, I think it is called adware? Also pages will pop up saying something along the lines of my computer is at risk for some security issue. What should I do?

Remove Browser Pop-up Problems
     AdwareMedic
     Adblock Plus 1.8.9
     remove adware that displays pop-up ads and graphics on your Mac
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic. If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.

How do I find the MAC address for the time capsule?

I am trying to install 2T time capsule as my main router. Telus my internet supplier allows me to in install the MAC address for the static ip that I am going to use. But where is the MAC address on the cube or how do I get it?

On the bottom label it should list the MAC address.
If you happen to still run the original.. ie decent airport utility it has all that info right in front of you.
But you see that was before Apple reduced the airport utility to the status of a toy..
Pretty pictures no info.. think kid's book.
See very very pretty.. as a UTILITY though.. useless.

Can i leave to mac on all the time? does any one have issues with speakers or camera not turning on?

this is a thought I have can i leave it on all the time does it reduce the life of the computor or should i turn off daily? Also have an issues when I do tturn t on 2 times out of ten the speaker or camera does not turn on and I have to reboot again. then it works

Apple recommends leaving your computer turned on 24/7 unless you will be away from it for several days. Read the manual that came with your computer and you will find that documentation. It's good practice to put the display to sleep (System Preferences - Energy Saver) when its not being used.

Mac pauses all the time, spinning ball.

I am a long time Mac user and I am stumped. Seems like lately the Mac is always pausing for several seconds and displaying the spinning ball. Its very frustrating and makes it impossible to get any work done. I've tried emptying all the caches, repairing permissions, fixing the directory tree, etc. I have 4GB of RAM and about 55GB of free disk space. No repair I do seems to fix the constant pausing. Doesn't matter what app I am in. Occurs most when switching apps and when typing. Activity monitor shows huge spikes in disk activity. CPU usage is low, nothing seems to be hogging CPU or RAM.
I am starting to wonder if the harddrive is dying.
Any ideas? I'd hate to buy a new machine when this machine should run fine (It was fine about 6 mos ago) Should I drop back to 10.4.11?
Thanks.

Hello,
I have been having the same issue. However, in my case it is with trying to install a new HD in my MBP. I had bought a new OEM WD Blue 750GB 2.5" drive to replace my factory 250GB drive. I bought the original drive from Newegg. When I first tried to install the drive, everything seemed ok, but after installing a clean install of OS X, and using Time Machine things seemed to take forever.
When trying to install OS X, it took almost 4 hours! This is when i put my ear up to the laptop [above the drive location] nd heard the drive spin up, click, then spin down. I called Newegg, and got an RMA. This pasted week, I got the Second drive. This drive, yesterday after installing it the night before, started doing the same thing.
Does anyone know if its just bad drives from WD, since these were recently released? Or does this have something to do with OS X? I called AppleCare yesterday, and the Tech i talked to seemed to agree with my thoughts, that it is the drives which are at fault. He had me run Disk Utility from the Software discs, and run the Verify Disc test to check for errors. It did bring back some errors, I then ran the Repair Disc; which said that it did repair the disc. However, these issues still persist.

Page outs going crazy for basic tasks - Mac stalls all the time - what's up?!

Hey, guys. So I have no idea what the problem is. Basically my mac is just going extremely slow and stalling sometimes for the most basic tasks. Mail, Safari, iTunes. It's a late '09 model, basic.
Check this out:
[IMG]http://i44.tinypic.com/2ewkri1.png[/IMG]

There is excessive swapping of data between physical memory and virtual memory. That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

My mac crashes all the time, especially while i'm using Word.

every time, i'm using Word, my mac suddenly crashes for no reason. i don't know what's the problem or how to fix it, please, help me.
these are my mac specifications...
EtreCheck version: 2.0.4 (89)
Report generated October 15, 2014 at 5:22:54 AM GMT+3
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 3:9:42
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (68.26 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/AirParrot.app
[loaded] com.squirrels.airparrot.framebuffer (3 - SDK 10.7) Support
[loaded] com.squirrels.driver.AirParrotSpeakers (1.7 - SDK 10.7) Support
/Applications/MacX Video Converter Pro.app
[not loaded] com.digiarty.driver.goodSysAudioCapture (1 - SDK 10.8) Support
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[not loaded] com.aliph.driver.jstub (1.1.2) Support
[loaded] com.dvdfab.kext.fabio (1) Support
[not loaded] com.eltima.ElmediaPlayer.kext (1.0 - SDK 10.4) Support
[loaded] com.makemkv.kext.daspi (1) Support
[not loaded] com.portents.driver.PortentsChangerDriver (2.0.0) Support
[not loaded] com.portents.filesystems.PortentsDynamicFileSystem (2.0.0) Support
[not loaded] com.wdc.driver.1394HP (1.0.9) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
HW_CreateNetwork: Path: /Library/StartupItems/HW_CreateNetwork
HWPortDetect_driver: Path: /Library/StartupItems/HWPortDetect_driver
Jaksta: Path: /Library/StartupItems/Jaksta
Sudochmod: Path: /Library/StartupItems/Sudochmod
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[not loaded] net.culater.SIMBL.Agent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.ea.origin.ESHelper.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.portents.changerd.plist Support
[running] com.portents.changermediaid.plist Support
[running] com.prosoftnet.idrivesyncdaemon.plist Support
[running] com.proxify.proxySettingsDaemon.plist Support
[failed] com.proxify.updater.plist Support
[loaded] org.tcpdump.chmod_bpf.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.proxify.plist Support
[not loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ℹ️
GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
uTorrent Application (/Applications/uTorrent.app)
Genieo Application (/Incompatible Software/Genieo.app)
Genieo Application (/Incompatible Software/Genieo.app)
Genieo Application (/Incompatible Software/Genieo.app)
Genieo Application (/Incompatible Software/Genieo.app)
Genieo Application (/Incompatible Software/Genieo.app)
Genieo Application (/Incompatible Software/Genieo.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Dropbox Application (/Applications/Dropbox.app)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
HPEventHandler UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.6.1r629 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.5 Support
RealPlayer Plugin: Version: (null) Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 3.1.0f4 Support
Yahoo! Installer 3: Version: 1.0.128 Support
JavaAppletPlugin: Version: Java 7 Update 65 Check version
User Internet Plug-ins: ℹ️
FolxNetscapePlugIn: Version: Unknown
Safari Extensions: ℹ️
Video Converter
AllMyTube
Torrenthandler
Wondershare Player
Yontoo
Aimersoft Video Converter
3rd Party Preference Panes: ℹ️
Backblaze Backup Support
Control! Server Support
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
Growl Support
Java Support
MacFUSE Support
NTFS-3G Support
Perian Support
Tuxera NTFS Support
Time Machine: ℹ️
Auto backup: NO - Auto backup turned off
Destinations:
MyPassport [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      4% AdobeReader
      3% uTorrent
      3% WindowServer
      1% hidd
      1% RealPlayer Downloader Agent
Top Processes by Memory: ℹ️
247 MB AdobeReader
180 MB com.apple.IconServicesAgent
146 MB softwareupdated
103 MB ocspd
77 MB WindowServer
Virtual Memory Information: ℹ️
222 MB Free RAM
1.70 GB Active RAM
1.40 GB Inactive RAM
836 MB Wired RAM
1.38 GB Page-ins
0 B Page-outs

this is the most recent one....
Wed Oct 15 16:46:51 2014
panic(cpu 3 caller 0xffffff7fa11cbf7c): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80c77f9000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 3), Frame : Return Address
0xffffff80b4deb140 : 0xffffff801ee22f79
0xffffff80b4deb1c0 : 0xffffff7fa11cbf7c
0xffffff80b4deb290 : 0xffffff7f9f8f4f1b
0xffffff80b4deb350 : 0xffffff7f9f9be50a
0xffffff80b4deb390 : 0xffffff7f9f9be57a
0xffffff80b4deb400 : 0xffffff7f9fc3d056
0xffffff80b4deb530 : 0xffffff7f9f9e1ba9
0xffffff80b4deb550 : 0xffffff7f9f8fb96d
0xffffff80b4deb600 : 0xffffff7f9f8f9478
0xffffff80b4deb800 : 0xffffff7f9f8fa3f6
0xffffff80b4deb8e0 : 0xffffff7fa081c9c2
0xffffff80b4deb920 : 0xffffff7fa082c37f
0xffffff80b4deb940 : 0xffffff7fa085a33b
0xffffff80b4deb980 : 0xffffff7fa085a39b
0xffffff80b4deb9c0 : 0xffffff7fa0831e15
0xffffff80b4deba10 : 0xffffff7fa07fdb5e
0xffffff80b4debaa0 : 0xffffff7fa07f9ae7
0xffffff80b4debad0 : 0xffffff7fa07f7636
0xffffff80b4debb00 : 0xffffff801f2ce793
0xffffff80b4debb90 : 0xffffff801f2d068f
0xffffff80b4debbf0 : 0xffffff801f2ce1af
0xffffff80b4debd40 : 0xffffff801eeb6998
0xffffff80b4debe50 : 0xffffff801ee26bc1
0xffffff80b4debe80 : 0xffffff801ee139c5
0xffffff80b4debef0 : 0xffffff801ee1e013
0xffffff80b4debf70 : 0xffffff801eec9b9d
0xffffff80b4debfb0 : 0xffffff801eef4196
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7fa11bd000->0xffffff7fa11d0fff
            dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7fa11b5000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9f7fa000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9f4bf000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9f852000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7fa11b8000
         com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9f8a5000->0xffffff7f9fb0dfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9f4bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9f895000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9f852000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f9fb18000->0xffffff7f9fdc1fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9f8a5000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9f4bf000
         com.apple.GeForceTesla(8.2.4)[B0074750-2FC6-3E26-BEA0-5AD5469686CF]@0xffffff7fa 07dc000->0xffffff7fa08a6fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9f4bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9f895000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9f852000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9f8a5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:     0x000000001ec00000
Kernel text base: 0xffffff801ee00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 41971451253919
last loaded kext at 6679003302849: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7fa12e8000, size 20480)
last unloaded kext at 6922401133110: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7fa12e8000, size 16384)
loaded kexts:
com.Cycling74.driver.Soundflower 1.5.2
com.squirrels.airparrot.framebuffer 3
com.squirrels.driver.AirParrotSpeakers 1.7
com.dvdfab.kext.fabio 1
com.makemkv.kext.daspi 1
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.34
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1

Power Mac rebooting all the time

Hello, I have a power mac g5 (2003 dual 1.8 ghz 8gb ram it was installed mac os x leopard 10.5.4 and I was offered to upgrade to 10.5.8.installation was successful and I was asked to restart my mac. Then it is loaded apple logo and after a black screen and again restart Reinstall flash drive he does not see and does not boot into safe mode

We're stuck without an Install Disc or external drive to boot from.
Might be cheaper to get a 10.6 Install Disc.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57

Aperture and new 12-core Mac crashes all the time...

My brand new Mac 12-core and Aperture doesn't fit together!
To explain this first, everything on my new Mac is freshly installed. I spent nearly a week on that, but after trying to migrate it first... I formatted my hard disk and installed everything from scratch.
Now the machine is running except Aperture. While trying to export some photos it will crash for sure. I've tried this today around 30 times and it happens always after 100 - 200 pics. I had an e-sata card installed and removed it, but it happened again and again. I did the PRAM reset, repaired permissions, checked the RAM with Checkup and so on. Nothing helps...
Any ideas????

With a new box I would call Apple 1-800-SOS-APPL and have them resolve the issue.
Also, now is a good time to get in the habit of using Disk Utility to repair Permissions before and after installations. Over decades many of us on the Photoshop forums have formed the opinion that although Repairing Permissions is seldom a "fix," always Repairing Permissions immediately before and after every installation of any kind is helpful to long term trouble free operation with heavy graphics apps.
Note before and after installations, not every time an app is run. The "why" is a bit nebulous I am afraid. Simplistically the premise is arrange things properly prior to an installation so the Installer is starting from a proper arrangement; then rearrange after installation in case the Installer managed to screw things up somehow.
For many users, perhaps most, repairing Permissions is a waste of time. However things are different in the world of heavy graphics, enough so that empirically many of us have concluded that repairing Permissions before and after installations is worthwhile.
E.g. any time a Pro Epson printer hiccups I find reinstalling the driver to be a very useful step, and sometimes that quick simple driver reinstallation changes thousands of Permissions. Although incorrect Permissions may not be problematic for lesser apps, heavy graphics apps like Aperture or Photoshop may be more easily compromised.
-Allen

Web: Page Not Found Check Web Address (all the tim...

I bought my E70 yesterday and after working on it without any problems tonight I was trying to open a web page using the browser, and the browser showed me the message above.
It shows the same exact message for *all* pages I try to visit.
The behavior started after I had shut the phone off and then turned it back on.
I'm assuming the browser has crashed, but I don't know how to "reset it." I did already delete the cache and cookies, without any effect.
Or maybe some problem with the phone;s WiFi?
I'm new to the E70, so I can't say much about OS version or the like. I've searched around a bit on this forum, and googled, without success.
Does anyone know how I can get my browser back?
BTW: I connect using the WiFi which I'm sure that is working - tested it on my Laptop.
Thx.

Hello,
For the people who are having the same problem and looking for a solution, the only way I found to get around this was to backup the phone, format it, and restore your stuff back.
I hope this will help you.
Cya

My Mac restart all the time and did't works

I turn on my iMac and about one minute it is rebooting again

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

I have a mac osx and want to use a magic jack without the computer on all the time.

I am trying to use a magic jack plus without plugging into my mac. (It will work plugged directly into the computer but I bought it so I would not have to keep my mac on all the time to use the phone).
What do I need to get a separate modem. I am on air port express (an old one)

It appears that Magic Jack installs software on your system that it needs to run. Look at some of the threads in "More Like This" on the righthand side of this page or look here:
http://www.voipreview.org/review/magicjack

I have just bought a Humax PVR and Humax W-Lan dongle to connect to my Airport Extreme. I have put the mac address into the AE. The installation screen is picking up my network name no problem but it won't connect to the internet. Can anyone help please?

I have just bought a Humax 7500T PVR and a Humax W-Lan dongle to connect to my Airport Extreme.
I have put the mac address into the AE. The installation screen on my TV is picking up the network name but once appied it won't connect to the internet.
I've a few other things connected to the AE such as computers, ipad, itouch, etc, and have never had a problem connecting these once I've entered the mac address into the AE. Can anyone help me with this please?

have you made sure that the network setting in the system preferences is set up to use dhcp? if not i would try changing it so that it shows that it is getting its address by dhcp

After the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

WRT1900AC does not block internet access in Parental Control

Hi,My router does not block internet access on my other PC. I tryed "Always" tryed specific addresses, tryed IP addresses and everything tech support suggested. I even replaced the router at their advise. Nothing helped. I realize that the problem is not the router but probably my home network configuration, but I can't figure out what is it. To my defence, so couldn't they Does anybody have or had such a problem?Thank you

What Firmware version is currently loaded?Can you post screen shots of how you have the controls configured?Does the User Manual give any configuration help? Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have? Router and Wired Configurations
Setup DHCP reserved IP addresses for all devices ON the router. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.

Block internet access by MAC address all the time

Similar Messages

Maybe you are looking for