Block invoice in MIRO for additional account in G/L account Tab

Hi,
I created an invoice in MIRO. Then I added a GL account in the GL account tab.
I want to know how to block this invoice once you add an additional line in the GL account tab.
Any ideas?
Regards,
CD

Hi
try to set a limit with OMR6 with Type AN
Cheers
Tim

Similar Messages

Block Payment in MIRO for Lower Tolerance Limit

when we are posting MIRO Transaction
how can we block payment invoice in MIRO Tcode for the Lower Tolerance Limit
As the standard functionality is working for Upper Tolerance Limit, in the same way user needs to
block invoice for Lower Tolerance limit
Thanks

Hi Ganesh,
below is the user exit where you can check the tolarance and put the Block according to the your requirment.
User Exit name - MM08R002 -User exit for tolerance checks
in the above user exit you have to use the below Function exit.
1) EXIT_SAPLMRMC_001
2) EXIT_SAPLMRMP_001
we implemented the above user exit to put the payment block based on the checks.
You can find the documentation of the above exit in the system.
Thanks
Naresh

Userexit for Payment block invoice in MIRO/MIR7/Mrrl

Hi All,
In an purchase order invoice the the Payment block is defined at coompany code. My requirement is to define it at more granular level like at level of item category. For certain item categories I have to avoid the tolerance date check of paymeny block from getting triggered. Is there any userexit which allows to define the tolerance check for line items at item category level. (MIRO/MIR7/MRRL transactions)
Case here is: The delivery date entered in PO is dated as 3 months later. Entry sheet generated also shows the date as 3 months later. But the invoices are generated on monthly basis. So those invoices for which the delivery date of PO &entry sheet is not reached, automatically goes to Live Payment Block. The payment block on invoice has to be manually released.
Is there any other way to stop invoice from going to payment block.
I did changes in exit EXIT_SAPLMR1M_001 which has item category field. But this exit is not triggering always. On few cases it triggers.
I would appreciate any help on this. Thanks.

hi,
do use imlicit enhancement in the function module
MRM_FINAL_CHECK in this the line item details will be populated t_drseg table...........

Invoice verification(MIRO) for blanket purchase order

Dear All,
I am tring to enter invoice via. MIRO againest a blanket purchase order. The blanket purchase order is a Frame workorder with account assignment category 'U' & item category 'B'. I am getting error 'Enter G/L Account' while entering invoice varification in MIRO. I am entering the Amount in the 'Acct assgt' column (error mark). However the GL account & cost center field is gray out. System not allow me to enter the GL account & cost center in MIRO. Also I am unable to change the account assignment category from 'U' to 'K' in MIRO.
Can some one guide me how to resolve the above problem.
Your earlier input would be highly appriciated.
Thanks,
spsahu

Hi
Please check the Variant being used as per the Standard All the fields are in Entry Mode only.
Please use the Layout 7_6310 All information & Check
Check in OLMRLIST the Layout for transaction MIRO & Program SAPLMR1M
Please ensure that you use Document type FO in Creating Blanket PO's
Thanks & Regards
Kishore

Invoice verification(MIRO) for consignment

Dear ALL,
I have two questions about invoice verification.
1.Now we create PO for consignment material. For consignment material, we use MRKO to settle the GI and generate the AP. However, when we do IV via MIRO by selecting vendor, some consignment PO GR records also pop up. Can we hide those POs during invoice verification?
2.For some PO which IV is done, we can also display some blank items in MIRO, can we hids those items also?
Thanks,
Gary

Hi, all
Does anybody can answer my questions?
Thanks in advance,
Gary

Tables and fields for blocked invoices

hi,
what r the tables and fields which r required to develop a report that displays blocked invoices.
thanks
kishore

Hi Venkat,
Please check these tables
RBKP_BLOCKED            Logistics Invoice Verification: Blocked Invoices
RM08A                   Data for Processing Blocked Invoices
RSEG_BLOCKEDPRICES      Blocked Invoice Document Items with PO Information
RSEG_BUZEI               Blocked Invoice Document Items as Single-Column List
Best regards,
raam

Filling alloction field for a subledger account by posting invoice by MIRO

Hi, at this moment I am struggling with a problem concerning filling the field Allocation at line item of an GL account. When I am posting invoice by MIRO, I want to see certain information on line item of an GL Account. When I am posting an invoice by MIRO, this field is for P&L accounts and balancesheet accounts filled with the value such a determined in FS00, tab Control data, field Sort Key. So therefore all my accounts has the sort key Purchase order. When posting invoices by MIRO, the posting in FI, is showing me on line item level the PO-number in the field Allocation.
However, when I am posting an invoce by MIRO on an reconcilliation account for asset, the allocation field is empty, MIRO is not filling this field automatically. Although the settings of the sort key is the same as for other balance or P&L accounts.
Has anybody an idea how the allocation field can be filled automatically for an reconcilliation account for assets

Hi
Run the program RM07CUFA
in SE38 Tcode and check the inconsistencies.
Also in FS00 go to details of the GL account and double click on field status group under create bank interest tab and then double click material management/additional assignments.
You can see the required or suppressed fields

How to block accounting by MIRO for specific type of documents.

Hello
Is there any possibility to block accounting by MIRO for specific type of document? So you could only account specific type of documents by FBV* or FB*.
Regards
Marcin Obukowicz

Hi,
You can try to make a validation (OB28) which will check the document type based on transaction code prerequisites.
Regards,
Eli

Block invoices for PO with no GR-based IV flag

Hello SAP experts,
I need your help with finding a way to block invoices for PO with no GR-based IV flag. At our company, we treat service POs almost the same as material POs (to avoid receipt of service entry). The only difference from material PO is that service PO does not have the flag for GR. We customized our EBP to have this done.
Now, accounting wants to automatically block all invoices associate with service POs. In this case it would be a PO with no GR. I tried LIV configuration but it is only for price, quantity and etc. I also tried blocking with IR before GR but it didn't work because there is no GR.
Is there a way to achive automatic invoice block in this case?
Appreciate your help.
-AT-

Hi Annie,
if the configuration doesn't help you enough, you would have to add some custom logic after the invoice has been created.
Technically speaking, I believe there exists a business add-in (BAdI) where you could enter a piece of code which would after the invoice creation check the GR and block it if appropriate. Another implementation option would be a mini-workflow - there you would have a step which checks the GR existence and blocks the invoice.
Hope this helps, I suggest talking to your local abap consultant for more details,
-Mikko

Blocked invoices for SRM PO

Dear All
I have requirement in that i need to create blocked invoices for SRM PO's . I have created a PO in SRM portal . Now the invoice need to be done at R3 side but i am not aware how i can create a invoice for the SRM PO's .
Any one help me on this .
Regards
Sunanda
Edited by: SMABAP on Dec 31, 2008 7:36 AM

Hi,
please check whether your PO has sent to R/3 system or not . if it is there in R/3 then please create a PO with MIRO transaction.....
Before creating the invoice please check whether vendor has GR based invoice vertification or not...
if you are not able to do then ask your FI team to do this....
Thanks
Ravi

Determination of cost centre during MIRO for tax account

Hi,
We have the following scenario. We need to raise an invoice via MIRO where tax is applicable. As tax is not claimable, the automatically generated tax line is posted to a P&L account. For this, being a P&L account, cost centre is required. But as tax line item is always system generated, it takes the cost centre default from OKB9 configuration setting.
Actually, the default from OKB9 is incorrect and there should be a logic to determine the cost centre default. Is there a user exit which can derive the cost centre / BA based on certain logic? Is there any other way of handling this scenario?
Thanks.

HIi Tanmay,
I have 2 query
1 We need to raise an invoice via MIRO where tax is applicable. As tax is not claimable--- Who told you about this
2 why you want to post the tax amount to a Cost centre?????????
As i know there is always a tax is attached to the invoice which again assigned to the G/L account , so thease amount you give to the tax authority and its chargaed my customer/ Vendor

Field Selection for - Invoice Verification (MIRO)

Dear Experts,
Can anybody please explain how make Field selection for INVOICE VERIFICATION (MIRO).
I want BUSINESS AREA field mandatory in MIRO.
Thanks in Advance

Hi,
Business area is linked to other organizational units (plant, division,
distribution chanel, cost center). It can be defined using assigments
(e. cost centers to the business area) or combinations of information
(like plant and division determination).
It is usually derived from the account assignments of the cost items
and inherited from there into the vendor line item.
For MIRO,to automatically fill the business area it must be able to
uniquely identify a business area.
This means that for multiple materials each one must have the same
business area for IV to fill the vendor line item.
This is the way the system is designed.
The business area can be set as 'optional' field and is not 'mandatory'
by design.It can be customised according to the individual needs.
Please check the field status in tr OB41/OB14 and OB23 for the vendor.
Best Regards,
Arminda Jack

Accounting Entries during MIRO for a WBS Purchase order - reg

Hi,
I have created a Purchase order with account assignment as Project and attached a WBS element in the Account assignment tab. There is no GR involved in this PO.
When i am trying to do the Invoice verification, it generates the accounting entries as follows
Vendor G/L account Credited
GR/IR account with Zero value
G/L account assigned to WBS element Debited.
In actual i dont want to see the GR/IR account with zero values as an additional entry as it does not makes sense to have an entry with a zero value.
Please expedite with your valuable suggestions to eradicate the unnecessary entry of GR/IR during invoice posting.
Regards,
RitiG

HI,
I hope so ,there might be a problem at the PO creation Level.
an Account assigned PO can be Payed directly by MIRO.
But the folloeing setting has to be Made .
IN the Delivery Tab,uncheck the GR Tick Mak
and in the Invoice Tab GR IV tick Mark.
if these Ticks are unchecked ,then it would be a pure PO based IV and the posting should be in the Following Manner
Vendor
GL -- COnsumption..WHich is maintained in PO
+ any TAX related GLS that are affects do due to TDS(withholding ) or TAXINN
HOpe so it helps
Regards
Anjanna

MIRO for freight: freight clearing account not getting debited

All SAP Gurus,
We are doing MIRO for planned delivery cost (freight) and facing some problem in account determination.
Actually the ideal cycle goes like this:
The stock account is debited with the planned delivery costs at goods receipt and the system makes the offsetting posting to a freight clearing account. This posting is then cleared by an offsetting entry to the vendor account at invoice receipt.
In our case accounting entries are going correct at the time of GR.
But at the time of MIRO insted of freight clearing account, stock account is again getting debited.
Where may be the problem?
Please help.
Regards,

Hi
Check what are the debit and credit accounts for Freight transaction key in OBYC (check corresponding account key for freight condition in pricing procedure). If you maintain them correctly (generally we only maintain one GL account without specifying debit/credit in OBYC), then entry should be GR/IR freight clearing account debit at time of MIRO.
Check the accounting entry in MIRO - the posting keys you are seeing (when you scroll to right hand side in accounting document you can see transaction).
Thanks

FM to get accounting number when i/p is Invoice number(MIRO)

Hi all,
While creating Invoice in MIRO , it is creating two document. one is Invoice number
& the other is Accounting number for payment.
Is there any FM or table relation which will give Accounting Number as output when the input will be invoice number?
Thanks
pabi

The Invoice number is stored in the account document header, BKPF-AWKEY = RBKP-BELNR + RBKP-GJAHR, you can restrict account document related to invoice document with BKPF-AWTYP = 'RMRP'.
(I know AC_DOCUMENT_SENDER to display source document of an account document, or MRM_AC_DOCUMENT_SENDER_RMRP for RMRP type documents AND AC_DOCUMENT_RECORD the reverse way)
Regards,
Raymond

Block invoice in MIRO for additional account in G/L account Tab

Similar Messages

Maybe you are looking for