Block meant for printing invoice title is dark

Respected Gurus,
Block meant for printing invoice title is dark and tittle is not printed. I am able to get the print out right in other printer.
What could be the reason.
Regards.
Daya.

Dear All,
i changed my device type to SAPWIN, and the issue is resolved.
Daya.

Similar Messages

Smart form Driver Prog For Printing Invoice Lists

Hi Sap Gurus,
I am using the standard Sap drver prog RLB_invoice which is used for all invoices(ie Invoice,credit,debit,cancellation).Now,plz can anayone let me know the driver pgm used for printing invoice list smartform.
will the RLB_INVOICE serve my purpose or is there any other Prog.
Thanks in advance.
Points will be rewarded for successfull answers

Hi,
For Invoice
Form name = LB_BIL_INVOICE
Driver Program = RLB_INVOICE
Regards
Edited by: K.P.N on Jan 9, 2008 2:53 PM

No block device for printing

Hi......
I have installed arch linux 0.6 with cups and I not found the block device on /dev responsible for printing (like lp0 or devices on /dev/printers folder - this folder doesn't exist in my system). I already loaded the module parport_pc in the rc.conf. It doesn't work. I just created too alias in the modprobe.conf referencing this module with /dev/lp0 block device. It doesn't work too. My printer is epson C43SX and when printer is turn on, cups recognizes epson installed on the /dev/unknown-parallel0, but doesn't print anything.
Any suggestions?
Thank You for everyone that help me....
enigmabr.
PS: excuse me for my poor english[/code]

I have a similar difficulty but I am a total newbie. I have discovered that I have /dev/usb/lp0. So far, I have found my cups server is not being recognised or is not accesible to root.
Thought I would just suggest though that yours might be a usb printer, and if so that is where you look. Also I think you have to have the printer switched on.

Blocking customer for further Invoicing if the cheque is dishonoured

Hello All,
I want to know if it is possible in SAP to block the customer automatically if the check is dishonoured by the bank.
Scenario:
The Customer has a total credit limit of INR 100000. The customer has been invoiced for INR 50,000 i.e. open item of INR 50000 against the customer.
The customer makes the payment by Check.
The Client presents the Cheque to the bank, and wants to pass an interim entry against the customer. This eventually would clear the Customer open item thereby pushing back the Credit limit up to INR 100000 (original limit).
There may be a time lag between presenting the cheque and clearing the cheque. In case the cheque is dishonoured the client wants to Block the customer. In case the Customer Cheque is dishonoured 3 times in a year the customer should be blocked automatically.
Please advise if it is possible to block the customer automatically based on the Dishonouring of the cheque. Or is there any other way to achieve this.
Thanks and Regards
Nitin

You cannot do it with standard SAP. You'd need to write User Exit / BTE or a separate program to do this task. You can try the following method :
1. Create a new reversal reason for cheque dishonour
2. Write a User Exit for FB08 transaction such that when the reversal reason is selected as above, it should set a Billing Block or Customer Master block (as required by your client) while posting the reversal.
You'll have to sit with your ABAP Consultant to carry out this.
Ravi.

How do I create a collage in iPhoto that is NOT meant for printing?

I often want to create simple photo collages that I can embed in blog posts, etc. This is a one-click operation in Picasa but the only way I've found to do it in iPhoto so far is to pretend I'm creating a card, then open it in Preview, copy the bit I want and paste into a new file, save as a .jpg and reimport that into iPhoto so I can send it to Flickr or wherever. This is very far from elegant. Am I missing something, or does iPhoto genuinely lack this very simple bit of functionality?

This is not a feature of iPhoto.
Regards
TD

ARE1 creation error - "excise Invoice is not meant for Exports"

Hello Experts
We are working on ECC 6.0.
We were so far dealing with domestic sales and now have to start with exports (ARE1)
I've gone through many threads and all major configuration has been done according to J91 Block Builder. But I still have doubts.
1. While doing billing for export sales, when should excise invoice be generated. When generated then should it posted with accounting entry?
2. We've created a Running Bond & on test basis we have done billing and excise invoice (DLFC) has been generated along with billing.
But when we try to create ARE1 (J1IA101) with reference to above Official excise invoice, we get the message 4F242 ( 00090006 / 2008 excise invoice is not meant for exports). We've noticed in table J_1IEXCHDR for the above excise 90006 that the field Export Type is blank which should otherwise be B (Export under Bond). We have updated manually in the table as B to test and we are able to move ahead.
3. If we dont generate the excise with billing and try to do it in J1IIN, under utilisation even after changing the type from Local to Export only DEEMED Exports is highlighted in blue and could not be turned to BOND type.
Please suggest.
Kapil

Dear Kapil
when should excise invoice be generated
Once you generate delivery related (document type F8) proforma or commercial invoice, you should generate excise invoice
When generated then should it posted with accounting entry?
No excise entries should not be posted to accounting for export sales
excise invoice is not meant for exports
First ensure that you have a separate series group for exports.
Next in case of your Excise Invoice Type dont have any of the following, then system will throw that error
- Deemed export
- Export under bond
- Export without bond
- Export under Letter of Undertaking
Check whether the excise invoice type is generated with any of the above
thanks
G. Lakshmipathi

Print Invoice "Object Blocked"

when the user trying to print the invoice it is givng an error that the object is blocked. the error contains invoice number and the application 3 and output type. i am not able to think where to start investigation, thanks for your support

Hi
Will you please check two things :-
1) in the table VBRK for the said Invoice no. check is there any Billing Block. If it is blocked then you need to remove it.
2) What is the requirement assigned to the Output Procedure ( IMG --> Sales & Distribution --> Basic Function --> Output Control --> Output Determination >Output determination Using the Condition technique>mainatin Output Determination for Billing Doc-->Maintain Output Determination Procedure) may be your requirement assigned is not getting fulfilled.
Regards
Amitesh

Excise invoice is meant for normal exports.

Hi Gurus,
In Deemed exports : While raising ARE-3 its showing the following error message:
0000000003/2008 excise invoice is meant for normal exports.
Message no. 4F260
Please share your ideas to go ahead.
I have used same excise group but different series group and number ranges for that series group.
Regards
Sri

Maintained number ranges and in J1iin selected expots under bond.
Its working fine.
Best Regards
Sri

Excise invoice is not meant for exports. Message no. 4F242

Hi All
As per my Client Requirement i need to do export sales from specific Plant(Depot). which is used for only export sales.
i created STO and then i did Delivery and Billing (JEX) and created Excise invoice with refrence to Billing Doc
while Creating ARE - 1 document through T.Code J1IA101 it thronging ERROR
0020000023/2008 excise invoice is not meant for exports
Please give me u r suggestions
Thanks in Advance
Madhu

Dear Madhu,
As per your thread system is telling that invoice is not relevant for the exports so,
Please check the Excise invoice which you created is it relevant for expotrs or relevant for STO billing i.e domestic.
I hope it will help you,
Regards,
Murali.

Standard print program for fi invoice smartform printing

Hi friend,
Is there any standard print program available for printing FI related invoice .
I want print program for printing smartforms.
I want to know any method for searching the standard print program for printing smartform in Fi module.
Thanks & Regards,
Sathish

Hi,
FI related Forms will be configure in SPRO.
Goto SPRO and FI related applivcation.
There you will find the related forms and programs.

ARE1 Error ''000005/2009 Excise Invoice is not meant for Export"

I am working on ECC6 version of sap i am trying to create the ARE1 but it give the error as '0000500001/2007 excise
invoice is not meant for export'.I am trying to debug the program i thing the sy-msg type it catch that is e thats y it
goes to other loop pls help me out .

Dear Sarthak,
I have already maintained the number range object earlier, Still i verified it and number range object is present.
The error is not due to this Number range object.
The error is still there, Pls help.
Regads,
Arunava Sahana

0000000003/2007 excise invoice is not meant for exports.

WHEN IAM CREAING ARE 1 IA M GETTING THIS ERROR
0000000003/2007 excise invoice is not meant for exports.
Message no. 4F242

Hi murali,
Do you got any solution to your problem
if you got kindly inform me
cheers
bvdv

"Excise Invoice is not meant for Exports".

Dear All,
I am facing a problem while creating ARE1 for Export Sales.
At the time of creation (Tcode - J1IA101), when i am giving the outgoing excise invoice number, in the given field, system is saying that "Excise Invoice is not meant for Exports".
Whereas I have maintained seperate Series Group for Domestic as well as Exports.I have checked No.ranges as well, where I have found that, the Outgoing Excise invoice number is also maintained in the Number range Objects for Exports.
Can anybody suggest how to resolve the issue.
Rgds,
Indrajit

1.Check the Series Group is Maintained for Domestic and Exports
2. Maintain the number range in T.Code SNUM - Object "J_1IEXCEXP"
3.Ensure that the excise invoice number you referred is created for an export billing document.
4.Then go to J1IIN, check on the utilisation screen whether invoice type has been changed from Local to the respective export excise invoice.
5. Maintain the Bond with T.code J1IBN01 respective Plant and the Value with from to date
6. Cretae the ARE 1 through T.code J11A101 check the Excise Invoice No and the Amount
7. Check the Excise duty(BED) , E cess and Hr Edu Cess value is apperaing if not you have apply the Snote .
thanks
MJP Michael Joseph

Excise Invoice Print problem for multiple Invoices

HI All,
I Have developed a Zprint prog and zsmartform and attached it to standard tcode J1IP .
when we execute J1IP outputtype J1I10 we get multiple invoices . if we select one check box and execute and press print preview/ print we get the print correctly . But if we check multiple check boxes and press print/preview then we have to press print button multiple times/come back for every invoice .
My requirement is when we execute J1iP for multiple invoices it should not come multiple times pop up window ..ie in one print request we need to send multiple invoices . How to achieve this functionality.

Hi,
use NO_OPEN and NO_CLOSE fields of CONTROL_PARAMETERS structure
in Your call to smart form function module.
Currently You print every invoice in separate spool request.
You should print all invoices in one big spool requests.
Set NO_CLOSE = X to all, except last one, and NO_OPEN = X to all, except first one.
Regards,
Przemysław

Excise invoice Print for multiple invoices

Hi All ,
i have developed a z smartform and attached to standard tcode J1IP o/p type J1I0 . The o/p is comming fine when i select one excise no after excecuting tcode J1IP But if selected multiple invoices by checking the checkbox and press print preview or print
button each time it is giving print preview/print diaog. i.e i need to execute print for first invoice and again i have to come back and again it will ask print prview/print dialog for second like wise n times for n no of selected documents .
my requirement is like when i execute tcode J1Ip and when i select multiple invoice i should get only one print preview or print dialog for all documents . how to achieve this

HI friend,
Its simple.
Put all the invoices in a single loop. I think you will be calling the smartform function module for each and every invoice. Don't do like that. Just collect all the invoices in the final table first and after that display the invoices.
I think you can understand what i am saying.
Please try and let me know if you have any queries i will help you.
Thanks,
Sri Hari

Block meant for printing invoice title is dark

Similar Messages

Maybe you are looking for